Evaluación cuantitativa de riesgo para la salud pública por trichinelosis debido al consumo de productos elaborados con carne porcina en la provincia de Santa Fe y Córdoba.

La trichinelosis es una zoonosis parasitaria transmitida especialmente por carne de cerdo no tratada adecuadamente, siendo un problema de salud pública en zonas endémicas, originando considerables pérdidas económicas. La continua recurrencia de la trichinelosis animal involucra distintos eslabones de la cadena de elaboración de productos porcinos. Para mitigar el riesgo de esta enfermedad se deben aplicar medidas de manejo sustentadas científicamente y una estrategia para lograrlo es el análisis de riesgos. Éste es un proceso mediante el cual se examinan los posibles efectos nocivos para la salud como consecuencia de un peligro presente en un alimento y se establecen opciones para mitigarlo. No se han desarrollado evaluaciones cuantitativas de riesgos bajo las condiciones de producción, procesamiento y consumo nacionales. Se elaborará un modelo de riesgos que contemple desde la producción primaria hasta el consumo final. La información científica disponible para cada etapa del proceso será integrada al modelo como distribuciones de probabilidad empleando el programa @Risk®. Posteriormente, se obtendrá una estimación de la ocurrencia y extensión de la contaminación de productos de cerdo con trichinelosis, se identificarán las etapas del proceso que más afectan la probabilidad de infección, se analizará el impacto de diferentes estrategias de manejo sobre el riesgo de infección y se identificarán las áreas de investigación relevantes. Los resultados generados aportarán evidencia científica para la toma de decisiones sobre la gestión y comunicación del riesgo, siendo de utilidad para los organismos gubernamentales, empresas privadas del sector y otras organizaciones no gubernamentales relacionadas con el área de interés.

Espessura do tecido subcutaneo como preditor independente de ruido em imagem de TC cardiaca

Fundamento: Há poucos dados sobre a definição de parâmetros simples e robustos para predizer artefato de imagem em tomografia computadorizada (TC) cardíaca. Objetivos: Avaliar o valor da simples medida da espessura do tecido subcutâneo (espessura pele-esterno) como preditor de artefato de imagem em TC cardíaca. Métodos: O estudo avaliou 86 pacientes submetidos a angiotomografia computadorizada cardíaca (ATCC) com sincronização prospectiva com ECG e avaliação de escore de cálcio coronário com 120 kV e 150 mA. A qualidade da imagem foi medida objetivamente pelo artefato de imagem na aorta em ATCC, sendo 'artefato baixo' definido como aquele < 30 UH. Os diâmetros torácicos anteroposterior e laterolateral, o artefato de imagem na aorta e a espessura pele-esterno foram medidos como preditores de artefato em ATCC. A associação de preditores e artefato de imagem foi avaliada usando-se correlação de Pearson. Resultados: A dose média de radiação foi 3,5 ± 1,5 mSv. O artefato de imagem médio na ATCC foi de 36,3 ± 8,5 UH, sendo o artefato de imagem médiona fase sem contraste do exame de 17,7 ± 4,4 UH. Todos os preditores foram independentemente associados com artefato em ATCC. Os melhores preditores foram espessura pele-esterno, com correlação de 0,70 (p < 0,001), e artefato de imagem na fases em contraste,com correlação de 0,73 (p < 0,001). Ao avaliar a habilidade de predizer artefato de imagem baixo, as áreas sob a curva ROC para o artefato de imagem na fases em contraste e para a espessura pele-esterno foram 0,837e 0,864, respectivamente. Conclusão: Tanto espessura pele-esterno quanto artefato de escore de cálcio são preditores simples e precisos de artefato de imagem em ATCC. Tais parâmetros podem ser incorporados aos protocolos de TC padrão para ajustar adequadamente a exposição à radiação.

Desarrollo y empleo de biocatalizadores en la preparación de aditivos alimentarios

Hasta ahora la mayoría de aditivos empleados en alimentación se obtienen mediante extracción de material vegetal o a través de síntesis química clásica. Una de las alternativas a estas aproximaciones, que estos últimos años esta tomando fuerza, pasa por la aplicación de sistemas biológicos a la transformación de productos químicos obtenidos por vía sintética o mediante la transformación de otros productos naturales. El amplio uso de dichos sistemas en la química orgánica de síntesis ha demostrado ya su alto potencial, habiendo sido aplicado a la preparación de medicamentos, aromas, aditivos, polímeros y otras sustancias químicas. El proyecto desarrollado tenía como idea básica contribuir al establecimiento de las bases de futuras nuevas bio-industrias a partir del desarrollo de nuevas metodologías y biocatalizadores para la obtención de productos de alto valor añadido. Las substancias escogidas inicialmente, y las que se han ido estudiando durante el desarrollo del proyecto, son ampliamente empleadas en la preparación de aditivos alimentarios utilizados en bebidas, salsas, chicles entre otros productos. Otra característica de dichas sustancias es que ellas o sus derivados pueden presentarse en distintas formas estereoisoméricas, cada una con propiedades organolépticas características.

Biofilm formation by staphylococci on fresh, fresh-frozen and processed human and bovine bone grafts.

Biofilm formation is a multi-step process influenced by surface properties. We investigated early and mature biofilm of Staphylococcus aureus on 4 different biological calcium phosphate (CaP) bone grafts used for filling bone defects. We investigated standardised cylinders of fresh and fresh-frozen human bone grafts were harvested from femoral heads; processed humanand bovine bone grafts were obtained preformed. Biofilm formation was done in tryptic soy broth (TSB) using S. aureus (ATCC 29213) with static conditions. Biofilm density after 3 h (early biofilm) and 24 h (mature biofilm) was investigated by sonication and microcalorimetry. After 3 h, bacterial density was highest on fresh-frozenandfresh bone grafts. After 24 h, biofilm density was lowest on freshbone grafts (p < 0.001) compared to the other 3 materials, which did not differ quantitatively (p > 0.05). The lowest increase in bacterial density was detected on fresh bone grafts (p < 0.001). Despite normal shaped colonies, we found additional small colonies on the surface of the fresh and fresh-frozen samples by sonication. This was also apparent in microcalorimetric heat-flow curves. The four investigated CaP bone grafts showed minor structural differences in architecture but marked differences concerning serum coverage and the content of bone marrow, fibrous tissue and bone cells. These variations resulted in a decreased biofilm density on freshand fresh-frozenbone grafts after 24 h, despite an increased early biofilm formation and might also be responsible for the variations in colony morphology (small colonies). Detection of small colony variants by microcalorimetry might be a new approach to improve the understanding of biofilm formation.

Molecular detection and identification of zygomycetes species from paraffin-embedded tissues in a murine model of disseminated zygomycosis: a collaborative European Society of Clinical Microbiology and Infectious Diseases (ESCMID) Fungal Infection Study Group (EFISG) evaluation.

The present study was performed to assess the interlaboratory reproducibility of the molecular detection and identification of species of Zygomycetes from formalin-fixed paraffin-embedded kidney and brain tissues obtained from experimentally infected mice. Animals were infected with one of five species (Rhizopus oryzae, Rhizopus microsporus, Lichtheimia corymbifera, Rhizomucor pusillus, and Mucor circinelloides). Samples with 1, 10, or 30 slide cuts of the tissues were prepared from each paraffin block, the sample identities were blinded for analysis, and the samples were mailed to each of seven laboratories for the assessment of sensitivity. A protocol describing the extraction method and the PCR amplification procedure was provided. The internal transcribed spacer 1 (ITS1) region was amplified by PCR with the fungal universal primers ITS1 and ITS2 and sequenced. As negative results were obtained for 93% of the tissue specimens infected by M. circinelloides, the data for this species were excluded from the analysis. Positive PCR results were obtained for 93% (52/56), 89% (50/56), and 27% (15/56) of the samples with 30, 10, and 1 slide cuts, respectively. There were minor differences, depending on the organ tissue, fungal species, and laboratory. Correct species identification was possible for 100% (30 cuts), 98% (10 cuts), and 93% (1 cut) of the cases. With the protocol used in the present study, the interlaboratory reproducibility of ITS sequencing for the identification of major Zygomycetes species from formalin-fixed paraffin-embedded tissues can reach 100%, when enough material is available.

Extracellular serine-proteinases isolated from Streptomyces alboniger: Partial characterization and effect of aprotinin on cellular structure

Streptomyces alboniger ATCC 12461 grown in brain heart infusion (BHI) medium produced two extracellular serine-proteinases, denoted SP I and SP II, which were purified by ammonium sulfate precipitation and aprotinin-agarose affinity chromatography. SP I was purified 88,9-fold and SP II 66,7- fold, with 33.4% and 10.4% yield, respectively. The optimum pH for the proteinases activity, using a-N-p-tosyl-L-arginine-methyl ester (TAME) as substrate, was 9-10 and the optimum temperature was 37ºC. The proteolytic activity of SP I and SP II was inhibited by aprotinin and SP I was partially inhibited by leupeptin, both serine-proteinase inhibitors. S. alboniger growth in BHI-liquid medium decreased when 5 mg/ml, 10 mg/ml of aprotinin was used, being completely inhibited with 20 mg/ml and 40 mg/ml. At the ultrastructural level, aprotinin-treated S. alboniger cells showed swelling of the bacterial body and condensation of the genetic material, probably related to the inhibition of its growth.

Cytotoxicity and potential antiviral evaluation of violacein produced by Chromobacterium violaceum

Natural products are an inexhaustible source of compounds with promising pharmacological activities including antiviral action. Violacein, the major pigment produced by Chromobacterium violaceum, has been shown to have antibiotic, antitumoral and anti-Trypanosoma cruzi activities. The goal of the present work was to evaluate the cytotoxicity of violacein and also its potential antiviral properties.The cytotoxicity of violacein was investigated by three methods: cell morphology evaluation by inverted light microscopy and cell viability tests using the Trypan blue dye exclusion method and the MTT assay. The cytotoxic concentration values which cause destruction in 50% of the monolayer cells (CC50) were different depending on the sensitivity of the method. CC50 values were > 2.07 ± 0.08 µM for FRhK-4 cells: > 2.23 ± 0.11 µM for Vero cells; > 2.54 ± 0.18 µM for MA104 cells; and > 2.70 ± 0.20 µM for HEp-2 cells. Violacein showed no cytopathic inhibition of the following viruses: herpes simplex virus type 1 (HSV-1) strain 29-R/acyclovir resistant, hepatitis A virus (strains HM175 and HAF-203) and adenovirus type 5 nor did it show any antiviral activity in the MTT assay. However violacein did show a weak inhibition of viral replication: 1.42 ± 0.68%, 14.48 ± 5.06% and 21.47 ± 3.74% for HSV-1 (strain KOS); 5.96 ± 2.51%, 8.75 ± 3.08% and 17.75 ± 5.19% for HSV-1 (strain ATCC/VR-733); 5.13 ± 2.38 %, 8.18 ± 1.11% and 8.51 ± 1.94% for poliovirus type 2; 8.30 ± 4.24%; 13.33 ± 4.66% and 24.27 ± 2.18% for simian rotavirus SA11, at 0.312, 0.625 and 1.250 mM, respectively, when measured by the MTT assay.

Comparison of Methods for Evaluation of the Bactericidal Activity of Copper-Sputtered Surfaces against Methicillin-Resistant Staphylococcus aureus.

Bacteria can survive on hospital textiles and surfaces, from which they can be disseminated, representing a source of health care-associated infections (HCAIs). Surfaces containing copper (Cu), which is known for its bactericidal properties, could be an efficient way to lower the burden of potential pathogens. The antimicrobial activity of Cu-sputtered polyester surfaces, obtained by direct-current magnetron sputtering (DCMS), against methicillin-resistant Staphylococcus aureus (MRSA) was tested. The Cu-polyester microstructure was characterized by high-resolution transmission electron microscopy to determine the microstructure of the Cu nanoparticles and by profilometry to assess the thickness of the layers. Sputtering at 300 mA for 160 s led to a Cu film thickness of 20 nm (100 Cu layers) containing 0.209% (wt/wt) polyester. The viability of MRSA strain ATCC 43300 on Cu-sputtered polyester was evaluated by four methods: (i) mechanical detachment, (ii) microcalorimetry, (iii) direct transfer onto plates, and (iv) stereomicroscopy. The low efficacy of mechanical detachment impeded bacterial viability estimations. Microcalorimetry provided only semiquantitative results. Direct transfer onto plates and stereomicroscopy seemed to be the most suitable methods to evaluate the bacterial inactivation potential of Cu-sputtered polyester surfaces, since they presented the least experimental bias. Cu-polyester samples sputtered for 160 s by DCMS were further tested against 10 clinical MRSA isolates and showed a high level of bactericidal activity, with a 4-log(10) reduction in the initial MRSA load (10(6) CFU) within 1 h. Cu-sputtered polyester surfaces might be of use to prevent the transmission of HCAI pathogens.

Antimicrobial activity and chemical investigation of Brazilian Drosera

The antimicrobial activity of three different extracts (hexanic, ethyl acetate, methanol) obtained from Brazilian Drosera species (D. communis, D. montana var. montana, D. brevifolia, D. villosa var. graomogolensis, D. villosa var. villosa, Drosera sp. 1, and Drosera sp. 2 ) were tested against Staphylococcus aureus (ATCC 25923), Enterococcus faecium (ATCC23212), Pseudomonas aeruginosa (ATCC27853), Escherichia coli (ATCC11229), Salmonella choleraesuis (ATCC10708), Klebsiella pneumoniae (ATCC13883), and Candida albicans (a human isolate). Better antimicrobial activity was observed with D. communis and D. montana var. montana ethyl acetate extracts. Phytochemical analyses from D. communis, D. montana var. montana and D. brevifolia yielded 5-hydroxy-2-methyl-1,4-naphthoquinone (plumbagin); long chain aliphatic hydrocarbons were isolated from D. communis and from D. villosa var. villosa, a mixture of long chain aliphatic alcohols and carboxylic acids, was isolated from D. communis and 3b-O-acetylaleuritolic acid from D. villosa var. villosa.

Studies on antimicrobial activity, in vitro, of Physalis angulata L. (Solanaceae) fraction and physalin B bringing out the importance of assay determination

Complex physalin metabolites present in the capsules of the fruit of Physalis angulata L. have been isolated and submitted to a series of assays of antimicrobial activity against Pseudomonas aeruginosa ATCC 27853, Staphylococcus aureus ATCC 29213, S. aureus ATCC 25923, S. aureus ATCC 6538P, Neisseria gonorrhoeae ATCC 49226, Escherichia coli ATCC 8739; E. coli ATCC 25922, Candida albicans ATCC 10231 applying different methodologies such as: bioautography, dilution broth, dilution agar, and agar diffusion techniques. A mixture of physalins (pool) containing physalins B, D, F, G inhibit S. aureus ATCC 29213, S. aureus ATCC 25923, S. aureus ATCC 6538P, and N. gonorrhoeae ATCC 49226 at a concentration of 200 mg/µl, using agar dilution assays. The mixture was inactive against P. aeruginosa ATCC27853, E. coli ATCC 8739; E. coli ATCC 25922, C. albicans ATCC 10231 when applying bioautography assays. Physalin B (200 µg/ml) by the agar diffusion assay inhibited S. aureus ATCC 6538P by ± 85%; and may be considered responsible for the antimicrobial activity.

The redox potential interferes with the expression of laminin binding molecules in Bacteroides fragilis

The Bacteroides fragilis ATCC strain was grown in a synthetic media with contrasting redox potential (Eh) levels [reduced (-60 mV) or oxidised (+100mV)] and their adhesion capacity to extracellular matrix components was evaluated. The strain was capable of adhering to laminin, fibronectin, fibronectin + heparan sulphate and heparan sulphate. A stronger adherence to laminin after growing the strain under oxidising conditions was verified. Electron microscopy using ruthenium red showed a heterogeneous population under this condition. Dot-blotting analyses confirmed stronger laminin recognition by outer membrane proteins of cells cultured at a higher Eh. Using a laminin affinity column, several putative laminin binding proteins obtained from the cultures kept under oxidising (60 kDa, 36 kDa, 25 kDa and 15 kDa) and reducing (60 kDa) conditions could be detected. Our results show that the expression of B. fragilis surface components that recognise laminin are influenced by Eh variations.

Antibacterial and antifungal activity of extracts and exudates of the Amazonian medicinal tree Himatanthus articulatus (Vahl) Woodson (common name: sucuba)

Himatanthus articulatus (Vahl) Woodson is a tree found in the northern Amazon savannahs (common name: sucuba) that is used in local Amerindian medicine. Leaf, bark and branch wood methanol extracts, sequentially obtained hexane, ethyl acetate and methanol extracts and latex were evaluated for antifungal and antibacterial activities against American Type Culture Collection (ATCC) and local clinical strains using the disc diffusion method. Methanol extracts and latex inhibited Candida albicans, leaf methanol extracts inhibited Staphylococcus aureus and Bacillus subtilis and bark methanol extracts inhibited B. subtilis. Active extracts inhibited the ATCC and clinical strains. Polar antifungal and antibacterial principles in latex and extracts are thought to be responsible for the inhibition.

Identification of uropathogenic Escherichia coli clonal group A (CgA) in hospitalised patients

This study provides the first description of healthcare-associated infections with Escherichia coli clonal group A (CgA) isolates in Latin America. Isolates were typed by enterobacterial repetitive intergenic consensus-PCR, pulsed-field gel electrophoresis, E. coli phylogenetic grouping, multilocus sequence typing and fimH single nucleotide polymorphism analysis. Out of 42 E. coli hospital isolates studied, three belonged to E. coli phylogenetic group D and ST69 and had fimH sequences identical to that of the CgA reference strain ATCC BAA-457. E. coli CgA is another potential source of resistant infections in hospitals.

Cryptococcus neoformans var. grubii - Pathogenicity of environmental isolates correlated to virulence factors, susceptibility to fluconazole and molecular profile

The pathogenicity of Cryptococcus neoformans is heterogeneous and is associated with the expression of virulence factors. This study aimed to correlate the pathogenicity of C. neoformans var. grubii in BALB/c mice with in vitro virulence factors, fluconazole minimal inhibitory concentrations (MICs) and molecular profiles, before and after animal passage. Ten environmental isolates and one ATCC strain of C. neoformans var. grubii mating type α were evaluated. Most isolates (91%) killed 50% or more of the infected animals by day 24 postinfection and were recovered from the lungs and brains of surviving animals on days 7 and 14 postinfection. The burden of yeast in the lungs was more variable than that in the brain. The differences in the expression of virulence factors (growth at 37ºC, presence and size of the capsule and production of melanin, urease, proteinase and phospholipase) by most isolates pre and postpassage in animals were not statistically significant. The fluconazole MICs in postpassaged lines differed by a one-dilution from the MIC of the corresponding prepassaged line for six isolates. Using molecular typing [polymerase chain reaction-fingerprinting with (GACA)4 and M13], eight isolates were identified as VNI and three as VNII. We concluded that different isolates with the same molecular and phenotypic profiles, including isolates that are markedly hypervirulent, span a wide range of virulence and there were no changes in virulence factors in the postpassaged lines when compared with the corresponding nonpassaged lines.

Aggregative adherent strains of Corynebacterium pseudodiphtheriticum enter and survive within HEp-2 epithelial cells

Corynebacterium pseudodiphtheriticum is a well-known human pathogen that mainly causes respiratory disease and is associated with high mortality in compromised hosts. Little is known about the virulence factors and pathogenesis of C. pseudodiphtheriticum. In this study, cultured human epithelial (HEp-2) cells were used to analyse the adherence pattern, internalisation and intracellular survival of the ATCC 10700 type strain and two additional clinical isolates. These microorganisms exhibited an aggregative adherence-like pattern to HEp-2 cells characterised by clumps of bacteria with a "stacked-brick" appearance. The differences in the ability of these microorganisms to invade and survive within HEp-2 cells and replicate in the extracellular environment up to 24 h post infection were evaluated. The fluorescent actin staining test demonstrated that actin polymerisation is involved in the internalisation of the C. pseudodiphtheriticum strains. The depolymerisation of microfilaments by cytochalasin E significantly reduced the internalisation of C. pseudodiphtheriticum by HEp-2 cells. Bacterial internalisation and cytoskeletal rearrangement seemed to be partially triggered by the activation of tyrosine kinase activity. Although C. pseudodiphtheriticum strains did not demonstrate an ability to replicate intracellularly, HEp-2 cells were unable to fully clear the pathogen within 24 h. These characteristics may explain how some C. pseudodiphtheriticum strains cause severe infection in human patients.