Tetrahydrobiopterin metabolism in mental disorders

Changes in DHPR activity in those aged 12 and under with a variety of mental disorders were investigated using dried blood spots on Guthrie cards. DHPR activity was found to be lowered in autism and Rett's syndrome. DHPR activity was unaffected in non specific mental retardation suggesting that the deficit seen in autism and Rett's syndrome does not arise secondary to the mental dysfunction. In Down's syndrome blood biopterin levels correlated with blood spot DHPR activity. Human brain BH4 synthetic activity was investigated in aging and senile dementia of the Alzheimer type (SDAT). BH4 synthetic activity and DHPR activity decline with age in non-demented controls. In SDAT, decreases in BH4 synthetic activity were seen in temporal and visual cortices and locus coeruleus. The site of the defect is probably at 6-pyruvoyl-tetrahydropterin synthase. Aluminium inhibits human brain BH4 synthesis in vitro and produces an `Alzheimeresque' pattern of abnormalities in rats chronically exposed to the acetate salt in drinking water. Aluminium appears to chiefly affect enzymes requiring a metal ion cofactor. Aluminium induced inhibition of BH4 synthesis can be reversed by treatment with transferrin, an aluminium chelator. Transferrin treatment improves BH4 synthetic activity in SDAT brains whilst having no effect on controls, further implicating aluminium as the key neurotoxin in SDAT. Lithium inhibits human brain BH4 synthesis in vitro and lowers rat brain total biopterins and inhibits rat brain BH4 synthesis on chronic exposure to the carbonate salt in drinking water. A possible mechanism for the anti-manic actions of lithium is suggested. Monoamine oxidase inhibitors decrease human brain BH4 synthetic activity in vitro. 5-methyl-tetrahydrofolate had no effect on human brain BH4 synthesis in vitro but methionine increased BH4 synthesis in vitro. Oxotremorine is a potent inhibitor of BH4 synthesis in man and the rat. This may prove useful as a tool for modelling BH4 deficiency.

Numerical modelling of agglomerate degradation

In the processing industries particulate materials are often in the form of powders which themselves are agglomerations of much smaller sized particles. During powder processing operations agglomerate degradation occurs primarily as a result of collisions between agglomerates and between agglomerates and the process equipment. Due to the small size of the agglomerates and the very short duration of the collisions it is currently not possible to obtain sufficiently detailed quantitative information from real experiments to provide a sound theoretically based strategy for designing particles to prevent or guarantee breakage. However, with the aid of computer simulated experiments, the micro-examination of these short duration dynamic events is made possible. This thesis presents the results of computer simulated experiments on a 2D monodisperse agglomerate in which the algorithms used to model the particle-particle interactions have been derived from contact mechanics theories and, necessarily, incorporate contact adhesion. A detailed description of the theoretical background is included in the thesis. The results of the agglomerate impact simulations show three types of behaviour depending on whether the initial impact velocity is high, moderate or low. It is demonstrated that high velocity impacts produce extensive plastic deformation which leads to subsequent shattering of the agglomerate. At moderate impact velocities semi-brittle fracture is observed and there is a threshold velocity below which the agglomerate bounces off the wall with little or no visible damage. The micromechanical processes controlling these different types of behaviour are discussed and illustrated by computer graphics. Further work is reported to demonstrate the effect of impact velocity and bond strength on the damage produced. Empirical relationships between impact velocity, bond strength and damage are presented and their relevance to attrition and comminution is discussed. The particle size distribution curves resulting from the agglomerate impacts are also provided. Computer simulated diametrical compression tests on the same agglomerate have also been carried out. Simulations were performed for different platen velocities and different bond strengths. The results show that high platen velocities produce extensive plastic deformation and crushing. Low platen velocities produce semi-brittle failure in which cracks propagate from the platens inwards towards the centre of the agglomerate. The results are compared with the results of the agglomerate impact tests in terms of work input, applied velocity and damage produced.

Duality of weak and strong scatterer in a Luttinger liquid coupled to massless bosons

We study electronic transport in a Luttinger liquid with an embedded impurity, which is either a weak scatterer (WS) or a weak link (WL), when interacting electrons are coupled to one-dimensional massless bosons (e.g., acoustic phonons). We find that the duality relation, ?WS?WL=1, between scaling dimensions of the electron backscattering in the WS and WL limits, established for the standard Luttinger liquid, holds in the presence of the additional coupling for an arbitrary fixed strength of boson scattering from the impurity. This means that at low temperatures such a system remains either an ideal insulator or an ideal metal, regardless of the scattering strength. On the other hand, when fermion and boson scattering from the impurity are correlated, the system has a rich phase diagram that includes a metal-insulator transition at some intermediate values of the scattering.

Designer catalysts for biodiesel synthesis

The combination of dwindling oil reserves and growing concerns over carbon dioxide emissions and associated climate change is driving the urgent development of clean, sustainable energy supplies. Biodiesel is a non-toxic and biodegradable fuel, with the potential for closed CO2 cycles and thus vastly reduced carbon footprints compared with petroleum. However, current manufacturing routes employing soluble catalysts are very energy inefficient, with their removal necessitating an energy intensive separation to purify biodiesel, which in turn produces copious amounts of contaminated aqueous waste. The introduction of non-food based feedstocks and technical advances in heterogeneous catalyst and reactor design are required to ensure that biodiesel remains a key player in the renewable energy sector for the 21st century. Here we report on the development of tuneable solid acid and bases for biodiesel synthesis, which offer several process advantages by eliminating the quenching step and allowing operation in a continuous reactor. Significant progress has been made towards developing tuneable solid base catalysts for biodiesel synthesis, including Li/CaO [1], Mg-Al hydrotalcites [2] and calcined dolomite [3] which exhibit excellent activity for triglyceride transesterification. However, the effects of solid base strength on catalytic activity in biodiesel synthesis remains poorly understood, hampering material optimisation and commercial exploitation. To improve our understanding of factors influencing solid base catalysts for biodiesel synthesis, we have applied a simple spectroscopic method for the quantitative determination of surface basicity which is independent of adsorption probes. Such measurements reveal how the morphology and basicity of MgO nanocrystals correlate with their biodiesel synthesis activity [4]. While diverse solid acids and bases have been investigated for TAG transesterification, the micro and mesoporous nature of catalyst systems investigated to date are not optimal for the diffusion of bulky and viscous C16-C18 TAGs typical of plant oils. The final part of this presentation will address the benefits of designing porous networks comprising interconnected hierarchical macroporous and mesoporous channels (Figure 1) to enhance mass-transport properties of viscous plant oils during biodiesel synthesis [5]. References: [1] R.S. Watkins, A.F. Lee, K. Wilson, Green Chem., 2004, 6, 335. [2]D.G. Cantrell, L.J. Gillie, A.F. Lee and K. Wilson, Appl. Catal. A, 2005, 287,183. [3] C. Hardacre, A.F. Lee, J.M. Montero, L. Shellard, K.Wilson, Green Chem., 2008, 10, 654. [4] J.M. Montero, P.L. Gai, K. Wilson, A.F. Lee, Green Chem., 2009, 11, 265. [5] J. Dhainaut, J.-P. Dacquin, A.F. Lee, K. Wilson, Green Chem., 2010, 12, 296.

Stability of the Iteration Method for non Expansive Mappings

The general iteration method for nonexpansive mappings on a Banach space is considered. Under some assumption of fast enough convergence on the sequence of (“almost” nonexpansive) perturbed iteration mappings, if the basic method is τ−convergent for a suitable topology τ weaker than the norm topology, then the perturbed method is also τ−convergent. Application is presented to the gradient-prox method for monotone inclusions in Hilbert spaces.

Hiearchies of Eating Disorders: Fat-Phobia and Internalized Beauty Ideals in Online Communities

Research and discourse on Eating Disorders (ED) have a tendency to perpetuate certain stereotypes regarding women of color, however unintentional or innocuous it may appear. The research conducted, does show that the prominent ED within communities of minorities or of lower social status is Binge Eating Disorder (BED). A Foucauldian discourse analysis of online forums by young women with ED, such as myproana.com, would be the primary method of documenting how these women form a hierarchy of the community's ED, and analyze if it correlates with the social status primarily associated with the Eating Disorder. Within these forums, and ED based communities, a clear hierarchy is formed, with Anorexia Nervosa at the top and BED at the bottom. From the minimal research available on women of color and ED, it is clear that, for Black women at least, BED is the most common—and thus it is my goal to explore any possible correlation if applicable. Because so little exists that focuses on EDs in women of color, this analysis may help to promote more research in race and class dynamics of Eating Disorders, as well on how those factors affect how women view their own bodies.

Efeitos da azilsartana sobre a doença periodontal em um modelo experimental com ratos wistar

Periodontal diseases, highly prevalent disease in worldwide population, manifest primarily in two distinct entities: plaque-induced gingivitis and periodontitis. Periodontitis is a chronic inflammatory disease characterized of different levels of collagen, cementum, and alveolar bone destruction. Recent experimental studies demonstrated anti-inflammatory and antirreabsortive effect of antihypertensive agents of the angiotensin II receptor blockers class on periodontal disease. The aim of this study was to evaluate the effects of azilsartan (AZT), a potent inhibitor of the angiotensin II receptor which has minimal adverse effects on bone loss, inflammation, and the expression of matrix metallo proteinases (MMPs), receptor activator of nuclear factor kB ligand (RANKL), receptor activator of nuclear factor kB (RANK), osteoprotegerin (OPG), cyclooxygenase-2 (COX-2), and cathepsin K in periodontal tissue in a rat model of ligature-induced periodontitis. Male Wistar albino rats were randomly divided into 5 groups of 20 rats each: (1) nonligated, water; (2) ligated, water; (3) ligated, 1 mg/kg AZT; (4) ligated, 5 mg/kg AZT; and (5) ligated, 10 mg/kg AZT. All groups were treated with water or AZT for 10 days. Periodontal tissues were analyzed by morphometric exam, histopathology and immunohistochemical detection of MMP-2, MMP-9, COX-2, RANKL, RANK, OPG, and cathepsin K. Levels of IL-1b, IL-10, TNF-a, myeloperoxidase (MPO), and glutathione (GSH) were determined by ELISA. Treatment with 5 mg/kg AZT resulted in reduced MPO (p˂0.05) and IL-1b (p˂0.05) levels and increased in Il-10 levels (p˂0.05). It was observed a reduced expression of MMP-2, MMP-9, COX-2, RANK, RANKL, cathepsin K, and a increased expression of OPG in the animals subjected to experimental periodontitis and threated with AZT (5 mg/kg). Conclusions: These findings suggest an anti-inflammatory and anti-reabsortive effects of AZT on ligature-induced periodontitis in rats.

Contribution à l’étude des étalements dans les argiles sensibles de la mer de Champlain- Étude des étalements de Casselman (1971) et de Saint-Luc-de-Vincennes (1986)

Ce mémoire décrit, en premier lieu, l’analyse géotechnique et géomorphologique du glissement de 1971 à Casselman, Ontario. Les caractéristiques morphologiques identifiées à l’intérieur de la cicatrice confirment qu’il s’agit d’un étalement. Le sol impliqué est une argile sensible de la mer de Champlain, normalement à légèrement surconsolidée (OCR entre 1,0 et 1,2) dont les indices de liquidité varient entre 1,0 et 2,0. La résistance au cisaillement intacte mesurée au scissomètre de chantier varie entre 50 kPa et 87 kPa. L’argile adopte un comportement anti-écrouissage (perte de 40 % de la résistance en pic) lorsque soumise à des essais de cisaillement non-drainé. Une surface de rupture quasi-horizontale à deux niveaux principaux a été identifiée à partir des sondages au piézocône réalisés à l’intérieur de la cicatrice. Les coefficients de sécurité élevés obtenus à partir de méthodes à l’équilibre limite démontrent que la rétrogression ne peut être expliquée par des méthodes d’analyses conventionnelles. La deuxième partie du mémoire présente l’application numérique du principe de rupture progressive aux étalements de Casselman (1971) et de Saint-Luc-de-Vincennes (1986). Une étude paramétrique a été réalisée afin d’évaluer l’influence de la fragilité du comportement après la résistance en pic du sol, reliée dans l’étude à une épaisseur de bande de cisaillement, ainsi que de la résistance à grande déformation, sur l’initiation et la rétrogression résultant du processus de rupture progressive. Les résultats démontrent que la résistance à grande déformation a très peu d’influence sur l’initiation du processus de rupture progressive, qui est principalement influencé par la fragilité du comportement du sol. Il a aussi été observé que la rétrogression était majoritairement influencée par la résistance à grande déformation.

Estudo da prevalência e da gravidade da dermatite de contacto em 'frango do campo'

O sector avícola enfrenta atualmente dois desafios muito estimulantes. O primeiro decorre do aumento, que se prevê continuar a crescer, nos níveis de procura de carne de aves no mercado interno e internacional; o segundo decorre do facto da criação avícola ter adotado métodos de produção mais intensivos (kg peso vivo/m2/ano) e em maior escala, i.e. com maior concentração animal na mesma exploração. Este carácter vincadamente “industrial” tem merecido uma natural atenção das sociedades e das autoridades pecuárias no sentido desta economia de escala passar a ter num conjunto de instrumentos legais e técnicos o devido contrapeso para a salvaguarda das aves enquanto ser vivo. O presente trabalho tem como ponto de partida a Directiva 2007/43/CE do Conselho de 28 de Junho, relativa ao estabelecimento de regras mínimas para a proteção de frangos de carne. Em virtude de não existir ainda informação suficiente sobre a forma como a qualidade do maneio animal pode ser monitorizada, ao nível do abate, por médicos veterinários e auxiliares oficiais, em frangos de criação especial segundo os modelos definidos no Regulamento (CE) n.º 543/2008, urge realizar estudos neste domínio. O principal objetivo da realização do presente trabalho de campo foi o estudo da ocorrência das dermatites de contacto plantar (pododermatites) e da bolsa sinovial préesternal em frangos produzidos em sistemas de produção considerados “protetores” do bem-estar animal, designadamente os seguintes: i) ar livre; e, ii) extensivo de interior. O estudo foi efetuado num centro de abate de frangos do campo, em Oliveira de Frades, entre Maio de 20012 e Março de 2013. Os animais abatidos foram criados em explorações com contratos de integração situadas no Distrito de Viseu. Os dados foram recolhidos em 39 bandos diferentes da espécie Gallus domesticus, dos quais 1021 carcaças foram avaliadas após evisceração, o que correspondeu ao exame de uma a cada quinze aves da linha de abate. Para a avaliação da pododermatite foi utilizado o método adaptado pela DGAV, enquanto para a avaliação da bursite esternal foi efetuada tendo em conta o modelo aplicado em perus por Berk em 2002. Apesar do modelo estatístico desenvolvido para a análise dos resultados obtidos no presente trabalho exigir um maior número de observações, foi possível identificar com grande precisão alguns fatores de risco que devem ser realçados pela sua relevância no contexto dos sistemas produtivos escrutinados ou no mecanismo fisiopatológico da dermatite de contacto, nomeadamente os seguintes: (i) a idade das aves que, apesar de não ter sido identificada uma relação directa com os scores de pododermatite e bursite, verificou-se que a idade elevada que os animais tipicamente atingem nos sistemas de produção extensivos está associada a uma taxa superior de rejeições pela inspecção sanitária; (ii) o peso pré-abate que, independentemente da inconsistência defendida por diversos autores em relação à influência do peso vivo do frango industrial sobre a dermatite de contacto, nos animais produzidos em regime extensivo, esta variável pode desempenhar um fator chave para a ocorrência desta lesão. De facto, há que realçar que o peso destes animais tem uma importância fulcral na modelação da biomecânica da ave, incluindo na pressão exercida sobre a superfície plantar; (iii) o tipo de sistema de abeberamento, tendo ficado demonstrado que a selecção do tipo de bebedouro tem uma importância peculiar sobre a ocorrência de pododermatite em “frango de campo”, algo que está provavelmente relacionado com a influência exercida sobre o teor de humidade da cama. Globalmente, as frequências de pododermatite e bursite apuradas neste trabalho devem ser consideradas inquietantes. Esta preocupação eleva-se quando se toma consciência que as aves provieram de regimes considerados “amigáveis” e “sustentáveis”, pelo que urge monitorizar adequadamente aqueles sistemas produtivos, melhorar as suas condições e reanalisar os benefícios ao nível do bem-estar animal.

Composición de los hogares y niveles de gastos en bienes y servicios básicos en el Departamento del Cauca, Colombia

Éste documento tiene como objetivo caracterizar los hogares rurales y urbanos del departamento del Cauca, Colombia y clasificarlos según la tipología y el ciclo de vida del hogar, para establecer su relación con los niveles de gasto mínimo en bienes básicos, es decir, con los que definen los umbrales críticos de pobreza. Para tal efecto, se utiliza la Encuesta de Calidad de Vida de 2011 y se estiman modelos de análisis de varianza multifactoriales. Los resultados muestran, entre otros, que el tipo de hogar más frecuente, tanto en el área rural como la urbana, es el nuclear con hijos y los gastos mínimos básicos, en general, son en alimentos, vivienda y salud. Los rubros de educación y transporte presentan niveles más altos de consumo en los hogares urbanos que en los rurales..

Is the activity level of HD 80606 influenced by its eccentric planet?

Aims: Several studies suggest that the activity level of a planet-host star can be influenced by the presence of a close-by orbiting planet. Moreover, the interaction mechanisms that have been proposed, magnetic interaction and tidal interaction, exhibit a very different dependence on the orbital separation between the star and the planet. A detection of activity enhancement and characterization of its dependence on planetary orbital distance can, in principle, allow us to characterize the physical mechanism behind the activity enhancement. Methods: We used the HARPS-N spectrograph to measure the stellar activity level of HD 80606 during the planetary periastron passage and compared the activity measured to that close to apastron. Being characterized by an eccentricity of 0.93 and an orbital period of 111 days, the system's extreme variation in orbital separation makes it a perfect target to test our hypothesis. Results: We find no evidence for a variation in the activity level of the star as a function of planetary orbital distance, as measured by all activity indicators employed: log(R'HK), Hα, NaI, and HeI. None of the models employed, whether magnetic interaction or tidal interaction, provides a good description of the data. The photometry revealed no variation either, but it was strongly affected by poor weather conditions. Conclusions: We find no evidence for star-planet interaction in HD 80606 at the moment of the periastron passage of its very eccentric planet. The straightforward explanation for the non-detection is the absence of interaction as a result of a low magnetic field strength on either the planet or the star and of the low level of tidal interaction between the two. However, we cannot exclude two scenarios: i) the interaction can be instantaneous and of magnetic origin, being concentrated on the substellar point and its surrounding area; and ii) the interaction can lead to a delayed activity enhancement. In either scenario, a star-planet interaction would not be detectable with the dataset described in this paper.

Knowing What to Do: School Focus, Teacher Morale, and Teacher Turnover

This study explored how schools’ focus – the collective perception among teachers of clarity and consistency regarding school goals, expectations, and priorities – related to schoolwide morale and school turnover rates. I examined the hypothesis that focus attenuates the deleterious effects of student misconduct on teacher morale and the contributory role of student misconduct leading to teacher turnover. In addition, I examined climate strength regarding perceptions school focus as an indicator of focus itself, as well a potential moderating effect of climate strength on the magnitude of school focus-school morale and school focus-turnover relationships. Data from a national sample of middle and high schools (N schools = 348, N teachers = 11,376) were analyzed using school-level multiple regression models. Schools with higher focus had significantly higher morale, independent of related perceptions of administrative leadership. No significant relationship was found between school focus and school turnover rates. The hypothesized moderating effect of focus on student misconduct and morale was not supported, though there was a significant indication that focus attenuated the positive relationship between student misconduct and turnover. Climate strength of school focus ratings significantly correlated with focus scores, but did not moderate relationships between focus and predicted outcomes. Findings suggest that school-level focus does represent a characteristic of schools that has a meaningful positive relationship with teacher morale but do not necessarily clarify how that relationship manifests in schools or if that relationship presents an avenue for intervention.

EFFECT OF METAL PRIMERS ON MICROTENSILE BOND STRENGTH BETWEEN ZIRCONIA AND RESIN CEMENTS

Statement of problem. There are no established clinical procedures for bonding zirconia to tooth structure using resin cements. Purpose. The purpose of this study was to evaluate the influence of metal primers, resin cements, and aging on bonding to zirconia. Material and methods. Zirconia was treated with commercial primers developed for bonding to metal alloys (Metaltite, Metal Primer II, Alloy Primer or Totalbond). Non-primed specimens were considered as controls. One-hundred disk-shaped specimens (19 x 4 mm) were cemented to composite resin substrates using Panavia or RelyX Unicem (n=5). Microtensile bond strength specimens were tested after 48 hours and 5 months (150 days), and failure modes were classified as type 1 (between ceramic/cement), 2 (between composite resin/cement) or 3 (mixed). Data were analyzed by 3-way ANOVA and Multiple Comparison Tukey test (alpha=.05). Results. The interactions primer/luting system (P=.016) and luting system/storage time (P=.004) were statistically significant. The use of Alloy Primer significantly improved the bond strength of RelyX Unicem (P<.001), while for Panavia, none of the primers increased the bond strength compared to the control group. At 48 hours, Panavia had statistically higher bond strength (P=.004) than Unicem (13.9 +/- 4.4MPa and 10.2 +/- 6.6MPa, respectively). However, both luting systems presented decreasing, statistically similar; values after aging (Panavia: 3.6 +/- 2.2MPa; Unicem: 6.1 +/- 5.3MPa). At 48 hours, Alloy Primer/Unicem had the lowest incidence of type 1 failure (8%). After aging, all the groups showed a predominance of type 1 failures. Conclusions. The use of Alloy Primer improved bond strength between RelyX Unicem and zirconia. Though the initial values obtained with Panavia were significantly higher than RelyX Unicem, after aging, both luting agents presented statistically similar performances. (J Prosthet Dent 2011;105:296-303)

Bond strength of AH Plus and Epiphany sealers on root dentine irradiated with 980 nm diode laser

Aim To evaluate the bond strength of AH Plus and Epiphany sealers to human root canal dentine irradiated with a 980 nm diode laser at different power and frequency parameters, using the push-out test. Methodology Sixty canine roots were sectioned below the cementoenamel junction to provide 4-mm-thick dentine discs that had their root canals prepared with a tapered bur and irrigated with sodium hypochlorite, ethylenediaminetetraacetic acid and distilled water. The specimens were assigned to five groups (n = 12): one control (no laser) and four experimental groups that were submitted to 980 nm diode laser irradiation at different power (1.5 and 3.0 W) and frequency (continuous wave and 100 Hz) parameters. Half of specimens in each group had their canals filled with AH Plus sealer and half with Epiphany. The push-out test was performed and data (MPa) were analysed statistically by ANOVA and Tukey`s test (P < 0.05). The specimens were split longitudinally and examined under SEM to assess the failure modes after sealer displacement. Results The specimens irradiated with the diode laser and filled with AH Plus had significantly higher bond strength values (8.69 +/- 2.44) than those irradiated and filled with Epiphany (3.28 +/- 1.58) and the nonirradiated controls (3.86 +/- 0.60). The specimens filled with Epiphany did not differ significantly to each other or to the control (1.75 +/- 0.69). There was a predominance of adhesive failures at Epiphany-dentine interface (77%) and mixed failures at AH Plus-dentine interface (67%). Conclusions The 980 nm diode laser irradiation of root canal dentine increased the bond strength of AH Plus sealer, but did not affect the adhesion of Epiphany sealer.

Shear strength of adhesively bonded polyolefins with minimal surface preparation

Interest in polyethylene and polypropylene bonding has increased in the last years. However, adhesive joints with adherends which are of low surface energy and which are chemically inert present several difficulties. Generally, their high degree of chemical resistance to solvents and dissimilar solubility parameters limit the usefulness of solvent bonding as a viable assembly technique. One successful approach to adhesive bonding of these materials involves proper selection of surface pre-treatment prior to bonding. With the correct pre-treatment it is possible to glue these materials with one or more of several adhesives required by the applications involved. A second approach is the use of adhesives without surface pre-treatment, such as hot melts, high tack pressure-sensitive adhesives, solvent-based specialty adhesives and, more recently, structural acrylic adhesives as such 3M DP-8005® and Loctite 3030®. In this paper, the shear strengths of two acrylic adhesives were evaluated using the lap shear test method ASTM D3163 and the block shear test method ASTM D4501. Two different industrial polyolefins (polyethylene and polypropylene) were used for adherends. However, the focus of this study was to measure the shear strength of polyethylene joints with acrylic adhesives. The effect of abrasion was also studied. Some test specimens were manually abraded using 180 and 320 grade abrasive paper. An additional goal of this work was to examine the effect of temperature and moisture on mechanical strength of adhesive joints.