880 resultados para Mediation and conciliation, Industrial
Resumo:
Northern Ireland's economic performance during the 'golden age' was weak. Crafts suggested that rent-seeking was an important determinant of this poor record. This article offers support for such a conclusion. It is suggested that the growth record was shaped by British regulations preventing conflicts of ministerial interest not being made operational until 1963. This institutional divergence tended to promote rent-seeking behaviour, which impeded the pursuit of an industrial policy that could promote economic efficiency. In 1963 the institutional structure and the industrial policy framework changed. These changes stimulated the pursuit of efficiency and contributed to an improved regional economic performance.
Resumo:
Precise control over the interfacial area of aqueous and organic slugs in segmented flow in a microchannel reactor provides an attractive means to optimize the yield and productivity of a phase-transfer-catalyzed reaction. Herein, we report the selective alkylation of phenylacetonitrile to the monoalkylated product in a microchannel of 250-mu m internal diameter operated in a continuous and solvent-free manner in the slug-flow regime. The conversion of phenylacetonitrile increased from 40% to 99% as a result of a 97% larger slug surface-to-volume ratio when the volumetric aqueous-to-organic phase flow ratio was raised from 1.0 to 6.1 at the same residence time. The larger surface-to-volume ratio significantly promoted catalyst phase transfer but decreased selectivity because of the simultaneous increase of the rate of the consecutive reaction to the dialkylated product. There exists all Optimum flow ratio with a maximum productivity. Conversion and selectivity in the microchannel reactor were both found to be significantly larger than in a stirred reactor.
Resumo:
The commercial production of vanillin from sodium lignosulfonate under highly alkaline conditions, catalyzed by Cu2+ at elevated temperature and pressures up to 10 bar, has been simulated in a 3-L stirred reactor. Initially, the process was operated in the presence of nitrogen in dead-end mode, and it was shown that vanillin and vanillic acid were formed by hydrolysis at temperatures of 120, 140, and 160 °C. At the two higher temperatures, the amount of vanillin produced was the same. Subsequently, experiments were conducted at the same elevated pressures and temperatures with addition of air or oxygen-enriched air once the temperature in the reactor had reached temperatures similar to those used when only hydrolysis occurred. In this case, the concentration of vanillin at 140 and 160 °C was equal to that due to hydrolysis, and the subsequent 2-fold increase was due to oxidation. In addition, both vanillic acid and acetovanillone (which has rarely been reported) were produced, as was hydrogen. Thus, for the first time, it has been shown that the production of vanillin (and other compounds) from sodium lignosulfonate at elevated temperatures involves hydrolysis and oxidation, with hydrolysis starting at just above 100 °C, that is, much lower than has previously been reported. Approximately 50% is produced by each mechanism. In addition, the orders of the reactions of the different steps were estimated, and the reaction mechanisms are discussed.
Resumo:
Total-arsenic (T-As) and arsenic (As) species were determined by HPLC-HG-AAS in ten different confectionery products: nine throat pearls and an industrial licorice extract. The Spanish legislation sets a maximum total-As content in confectionery products at 0.1 mu g/g. T-As concentrations were above the permitted maximum limit (mean of 0.219 +/- 0.008 mu g/g). All As was present in the form of toxic inorganic species. The daily consumption of licorice-confections in Spain is 1.1 g and leads to a daily intake of inorganic-As of 0.23 mu g (0.2% of the tolerable daily intake of inorganic As for a teenager). These experimental results proved that even though high total-As concentrations were found in licorice throat pearls and that all the As found was present as inorganic species, no significant risks for health are expected just by considering this As source.
Resumo:
High-pressure processing (HPP) can produce tomato juice of high quality and safety with a short shelf life under refrigeration temperatures. Long-term higher temperature storage studies are rare and temperature tolerant products are challenging to develop. The effect of high-pressure processing (HPP) on the total quality (colour, microbial counts, phytochemical levels, antioxidant and enzymatic activities) and stability (retention over time) of tomato juice during long-term storage was investigated. Thermal processing (TP) was used as a control treatment, and overall, two different ambient conditions (20 °C and 28 °C) were tested. Immediately after processing, HPP products proved superior to TP ones (enhanced redness, total carotenoids and lycopene, stable total phenols and inactivation of pectin methyl esterase). During initial storage (30 d) most quality attributes of HPP juice remained stable. Prolonged storage, however, led to losses of most quality attributes, although HPP (20 °C) showed lower quality degradation rate constants comparison to TP and HPP (28 °C). Industrial Relevance: There is a demand for ambient stable tomato products, especially in some parts of the world, and current industrial practices (canning, pasteurisation) either compromise in product quality or require refrigeration conditions. High-pressure processing has been investigated as milder technology, with a potential to deliver superior quality. The drawback is that is also requires chill storage. The results of this study show how quality parameters behave in a high-pressured tomato product and pave the way for further development that could optimise this technology. This could be of economic importance for the tomato juice industry to develop new products stable in ambient temperatures and perhaps beneficial for cutting down the refrigeration costs under specific conditions.
Resumo:
Em Portugal, as indústrias corticeira e de pasta de papel constituem um importante sector económico, contudo, gerando elevadas quantidades de subprodutos. Estes subprodutos poderiam ser explorados em aplicações de alto valor acrescentado, como fonte de compostos fenólicos, por exemplo, em vez de serem apenas queimados para produção de energia. Estes compostos são conhecidos pelas suas inúmeras propriedades, entre as quais, antioxidante, anti-inflamatória e anti-trombótica. Neste estudo as frações fenólicas da maior parte dos subprodutos gerados nas indústrias corticeira e de pasta de papel foram caracterizados em detalhe, com vista à sua valorização. A fração fenólica das cascas de Eucalyptus globulus, E. grandis, E. urograndis e E. maidenii, bem como da cortiça de Quercus suber e resíduos provenientes da sua exploração, nomeadamente, o pó de cortiça e os condensados negros, foi obtida por processos convencionais de extração sólido-líquido. No caso da casca de E. globulus, foi ainda avaliado o potencial de metodologias “verdes” no processo de extração de compostos fenólicos, usando extração com CO2 supercrítico. Esta técnica foi otimizada com recurso a metodologias de superfície de resposta. Na identificação e quantificação dos compostos fenólicos foi usada cromatografia líquida de alta resolução aliada a técnicas de espectrometria de massa. O teor de fenólicos totais foi ainda determinado pelo método de Folin- Ciocalteu, essencialmente para efeitos comparativos. A caracterização da fração fenólica de cada extrato foi ainda complementada com a análise da atividade antioxidante, usando o radical 2,2-difenil-1-picrilhidrazilo (DPPH). Foram identificados trinta compostos fenólicos na casca de E. globulus, 17 deles referenciados pela primeira vez como seus constituintes, nomeadamente os ácidos quínico, di-hidroxifenilacétic, cafeico e metil-elágico, bis-hexahidroxidifenoil( HHDP)-glucose, galoil- bis-HHDP-glucose, galoil-HHDPglucose, isoramnetina—hexosídeo, quercetina-hexosídeo, ácido metil-elágicopentosídeo, miricetina-ramnosídeo, isoramnetina-ramnosídeo, mearnsetina, floridzina, mearnsetina-hexosídeo, luteolina e uma proantocianidina B. Neste trabalho, foi estudada pela primeira vez a composição fenólica das cascas de E. grandis, E. urograndis e E. maidenii. Treze, doze e vinte e quatro compostos fenólicos foram identificados nas cascas de E. grandis, E. urograndis e E. maidenii, respetivamente. Entre estes compostos encontram-se os ácidos quínico, gálico, metilgálico, protocatequínico, clorogénico e elágico, catequina, galoil-bis-HHDP-glucose, digaloilglucose, epicatequina, quercetina-glucoronídeo, di-hidroxiisopropilcromona- hexosídeo, isoramnetina-hexosídeo, ácido elágicoramnosídeo, taxifolina, quercetina-hexosídeo, di-hidroxi- (metilpropil)isopropilcromona-hexosídeo, ácido metil-elágico-pentosídeo, miricetina-ramnosídeo, isoramnetina-ramnosídeo, aromadendrina-ramnosídeo, mearnsetina, mearnsetina-hexosídeo, eriodictiol, quercetina, isoramnetina e naringenina. A análise da fração fenólica da cortiça permitiu identificar vinte e dois compostos fenólicos, dez deles referenciados pela primeira vez como seus constituintes, nomeadamente, os ácidos quínico, salicílico, p-hidroxifenillático e metilgálico, ácido carboxílico da brevifolina, eriodictiol, naringenina, um éster isoprenílico do ácido cafeico, isoramnetina-ramnosídeo e isoramnetina. No pó de cortiça industrial foram identificados dezasseis compostos fenólicos, nomeadamente os ácidos quínico, gálico, protocatequínico, cafeico, ferúlico, elágico e metilgálico, esculetina, ácido carboxílico da brevifolina, coniferaldeído, um éster isoprenílico do ácido cafeico, uma dilactona do ácido valoneico, ácido elágico-pentosídeo, ácido elágico-ramnosídeo, isoramnetinaramnosídeo e isoramnetina. Destes, apenas o ácido elágico foi previamente referenciado como componente do pó de cortiça. Do mesmo modo, treze compostos fenólicos foram identificados no condensado negro, doze deles referenciados pela primeira vez como seus constituintes. São eles os ácidos quínico, gálico, p-hidroxifenil-láctico, protocatequínico, p-coumarico, cafeico e elágico, vanilina, esculetina, coniferaldeído, um éster isoprenílico do ácido cafeico e o eriodictiol. A extração supercrítica de compostos fenólicos da casca de eucalipto permitiu não só verificar os parâmetros que afetam a qualidade e quantidade finais dos extratos, como também obter os valores ótimos para estes parâmetros. Esta extração mostrou ainda ser bastante seletiva para determinados grupos de compostos fenólicos, como as flavanonas eriodictiol e naringenina e para o flavonol O-metilado isoramnetina. Este é também o primeiro estudo envolvendo a determinação da atividade antioxidante de extratos da cortiça e dos resíduos da sua exploração, bem como da casca de E. grandis, E. urograndis e E. maidenii. A vasta gama de compostos fenólicos identificados em cada extrato analisado, assim como as prominentes atividades antioxidantes, todas na mesma gama de valores do bem conhecido antioxidante comercial, ácido ascórbico, são claramente um grande contributo para a valorização destes subprodutos industriais.
Resumo:
Algorithm and Architectures for Real-Time Control Workshop had the objective to investigate the state of the art and to present new research and application results in software and hardware for real-timecontrol, as well as to bring together engeneers and computer scientists who are researchers, developers and practitioners, both from the academic and the industrial world.
Resumo:
The IfBB – Institute for Bioplastics and Biocomposites is a research institute within the Hochschule Hannover, University of Applied Sciences and Arts, which was established in 2011 to respond to the growing need for expert knowledge in the area of bioplastics. With its practice-oriented research and its collaboration with industrial partners, the IfBB is able to shore up the market for bioplastics and, in addition, foster unbiased public awareness and understanding of the topic. As an independent research-led expert institution for bioplastics, the IfBB is willing to share its expertise, research findings and data with any interested party via the Internet, online and offline publications or at fairs and conferences. In carrying on these efforts, substantial information regarding market trends, processes and resource needs for bioplastics is being presented here in a concise format, in addition to the more detailed and comprehensive publication and “Engineering Biopolymers”1. One of our main concerns is to furnish a more rational basis for discussing bioplastics and use fact-based arguments in the public discourse. Furthermore, “Biopolymers – facts and statistics” aims to provide specific, qualified answers easily and quickly for decision-makers in particular from public administration and the industrial sector. Therefore, this publication is made up like a set of rules and standards and largely foregoes textual detail. It offers extensive market-relevant and technical facts presented in graphs and charts, which means that the information is much easier to grasp. The reader can expect comparative market figures for various materials, regions, applications, process routes, agricultural land use or resource consumption, production capacities, geographic distribution, etc.
Resumo:
The literatures on both authentic leadership and behavioral integrity have argued that leader integrity drives follower performance. Yet, despite overlap in conceptualization and mechanisms, no research has investigated how authentic leadership and behavioral integrity relate to one another in driving follower performance. In this study, we propose and test the notion that authentic leadership behavior is an antecedent to perceptions of leader behavioral integrity, which in turn affects follower affective organizational commitment and follower work role performance. Analysis of a survey of 49 teams in the service industry supports the proposition that authentic leadership is related to follower affective organizational commitment, fully mediated through leader behavioral integrity. Next, we found that authentic leadership and leader behavioral integrity are related to follower work role performance, fully mediated through follower affective organizational commitment. These relationships hold when controlling for ethical organizational culture.
Resumo:
Thesis (Master's)--University of Washington, 2015
Resumo:
Many rural-based farm and food businesses are relatively small but successful companies. They face severe constraints in terms of finance, marketing and distribution. However, marketing food by mail order presents the opportunity for these firms to gain access to national or even international markets. The achievement of commercial success requires that these companies become marketing oriented. Thus, the critical issue for these firms is to identify the needs of existing or potential customers. The objectives of the paper are to establish a profile of the characteristics, behaviour and attitudes of mail order customers.
Resumo:
Solubility measurements of quinizarin. (1,4-dihydroxyanthraquinone), disperse red 9 (1-(methylamino) anthraquinone), and disperse blue 14 (1,4-bis(methylamino)anthraquinone) in supercritical carbon dioxide (SC CO2) were carried out in a flow type apparatus, at a temperature range from (333.2 to 393.2) K and at pressures from (12.0 to 40.0) MPa. Mole fraction solubility of the three dyes decreases in the order quinizarin (2.9 x 10(-6) to 2.9.10(-4)), red 9 (1.4 x 10(-6) to 3.2 x 10(-4)), and blue 14 (7.8 x 10(-8) to 2.2 x 10(-5)). Four semiempirical density based models were used to correlatethe solubility of the dyes in the SC CO2. From the correlation results, the total heat of reaction, heat of vaporization plus the heat of solvation of the solute, were calculated and compared with the results presented in the literature. The solubilities of the three dyes were correlated also applying the Soave-Redlich-Kwong cubic equation of state (SRK CEoS) with classical mixing rules, and the physical properties required for the modeling were estimated and reported.
Resumo:
For most people design is a mystery. The products of design are integrated into our daily lives to the point that design has become invisible to us. However. what is subsumed in design practice is a creative problem-solving process that is applicable as a teaching strategy as well as a method for teaching the subject of design. The purpose of this study was to inquire into the current classroom practice of Ontario Visual Arts and Technological Education teachers, understand the goals of Ontario government curriculum developers, and explore the position held by the professional design community on secondary school design education. Data for this study were collected from: (a) a textual analysis of 4 Ministry curriculum documents; (b) interviews with JO stakeholders; (c) unobtrusive observations and informal conversations conducted at 7 secondary school open house events; and (d) observation of 2 sessions of an AQ course for Design and Technology. The research design modeled the design process and was divided into 2 parts: a discovery or problem-finding phase and a discussion or problem-solving phase. The results showed that design is misunderstood and misused; it has become lost between visual arts and technology where neither program holds responsibility for its delivery; students mistake working on computers for design practice; and while there is a desire within the professional community to have a voice in secondary school design education. there is no forum for participation. The technology-driven paradigm shift taking place in society today calls for a new framework for tellching and practicing dcsign. Further research is required; howcvcr. in the meantime. secondary school educators might benefit from professional development and classroom support from the professional dcsign community.
Resumo:
Cette étude aborde les questionnements relatifs à l’homologation et à l’entérinement d’une entente de règlement amiable conclue dans le cadre des processus de médiation ou de conciliation administrative. L’étude vise d’abord à clarifier les concepts en définissant précisément la terminologie privilégiée. La mise en œuvre des demandes est ensuite analysée au regard de la compétence des tribunaux administratifs et de celle des tribunaux de droit commun à l’égard d’un accord de conciliation ou d’une transaction conclu dans le cadre d’un litige administratif. Les formalités relatives à la présentation de la demande sont exposées. Les tests de conformité à la loi et à l’ordre public sont ensuite circonscrits pour terminer par un examen des conséquences de l’homologation ou de l’entérinement de l’entente sur les recours ultérieurs possibles tels que le recours en révision administrative ou le recours en révision judiciaire.
Resumo:
Peut-être mieux connu sous son appellation anglaise d' «online dispute resolution» ou ODR, le règlement en ligne des différends réfère à la migration, vers Internet, des modes alternatifs de résolution des conflits, dont font entre autres partie la négociation, la conciliation, la médiation et l'arbitrage. Cet article présente d'abord brièvement les quatre procédés d'ODR les plus souvent rencontrés en pratique, soit la négociation automatisée, la négociation en ligne assistée par ordinateur, la médiation en ligne et l'arbitrage en ligne. Il examine ensuite les types de conflits qui trouvent actuellement une solution par l'entremise de l'Internet, conflits qui peuvent naître aussi bien sur la Toile qu'hors ligne. On y aborde, en troisième lieu, les avantages de la résolution en ligne des litiges, lesquels ont trait à la modicité, la rapidité, la souplesse et la convivialité, en insistant sur l'attrait tout particulier que cette nouvelle forme de justice présente pour les conflits résultant de la cyberconsommation. Puis, après un survol des arguments les plus souvent cités à l'encontre du règlement électronique des différends, on fait état du phénomène d'institutionnalisation de la résolution en ligne, qui investit aujourd'hui les cours de justice.