Evaluation of systems for timing of fungicide sprays for control of postbloom fruit drop of citrus in Brazil

Postbloom fruit drop (PFD) of citrus, caused by Colletotrichum acutatum, infects petals of citrus flowers and produces orange-brown lesions that induce the abscission of young fruitlets and the retention of calyces. Proper timing of fungicide applications is essential for good disease control. Different systems for timing of fungicide applications for control of PFD in a major citrus-growing region in southern São Paulo state in Brazil were evaluated from 1999 to 2002. The following programs were compared to an unsprayed control using counts of diseased flowers, persistent calyces, or fruit: (i) a phenology-based program currently recommended in Brazil with one application at early and another at peak bloom; (ii) the Florida PFD model; (iii) the postbloom fruit drop-fungicide application decision system (PFD-FAD), a new computer-assisted decision method; and (iv) grower's choice. In 1999, no disease developed, sprays applied with the phenology-based program had no effect, and the Florida PFD model saved two sprays compared with the phenology-based program. In 2000, PFD was moderate and the phenology-based and growers' choice treatments had a significantly lower number of persistent calyces and higher fruit numbers than the control, but no differences were found between those treatments and the PFD model. In 2001, PFD was severe with considerable yield loss. The PFD model, the phenology-based program, and the grower's choice reduced flower blight and the number of persistent calyces, and improved fruit yields with two to three applications, but the PFD-FAD achieved comparable yields with only one spray. In 2002, the disease was mild, with no yield loss, and the Florida PFD model and the PFD-FAD saved one spray compared with the other systems. The PFD model and the PFD-FAD were equally effective for timing fungicide applications to control PFD in Brazil. Scouting of trees is simpler with PFD-FAD; therefore, this system is recommended and should eliminate unnecessary sprays and reduce costs for growers.

Influence of light curing source on microhardness of composite resins of different shades

Introduction: The evolution of light curing units can be noticed by the different systems recently introduced. The technology of LED units promises longer lifetime, without heating and with production of specific light for activation of camphorquinone. However, further studies are still required to check the real curing effectiveness of these units. Purpose: This study evaluated the microhardness of 4 shades (B-0.5, B-1, B-2 and B-3) of composite resin Filtek Z-250 (3M ESPE) after light curing with 4 light sources, being one halogen (Ultralux - Dabi Atlante) and three LED (Ultraled - Dabi Atlante, Ultrablue - DMC and Elipar Freelight - 3M ESPE). Methods: 192 specimens were distributed into 16 groups, and materials were inserted in a single increment in cylindrical templates measuring 4mm x 4mm and light cured as recommended by the manufacturer. Then, they were submitted to microhardness test on the top and bottom aspects of the cylinders. Results: The hardness values achieved were submitted to analysis of variance and to Tukey test at 5% confidence level. It was observed that microhardness of specimens varied according to the shade of the material and light sources employed. The LED appliance emitting greater light intensity provided the highest hardness values with shade B-0.5, allowing the best curing. On the other hand, appliances with low light intensity were the least effective. It was also observed that the bottom of specimens was more sensitive to changes in shade. Conclusion: Light intensity of LED light curing units is fundamental for their good functioning, especially when applied in resins with darker shades.

Regulation, worker protection and active labour-market policies in Latin America

Includes bibliography

Kinetic and growth parameters of Arthrospira (Spirulina) platensis cultivated in tubular photobioreactor under different cell circulation systems

Arthrospira platensis was cultivated in tubular photobioreactor in order to evaluate growth and biomass production at variable photosynthetic photon flux density (PPFD?=?60, 120, and 240?mu mol photons m-2?s-1) and employing three different systems for cell circulation, specifically an airlift, a motor-driven pumping and a pressurized system. The influence of these two independents variables on the maximum cell concentration (Xm), cell productivity (Px), nitrogen-to-cell conversion factor (YX/N), photosynthetic efficiency (PE), and biomass composition (total lipids and proteins), taken as responses, was evaluated by analysis of variance. The statistical analysis revealed that the best combination of responses' mean values (Xm?=?4,055?mg?L-1, Px?=?406?mg?L-1?day-1, YX/N?=?5.07?mg?mg-1, total lipids?=?8.94%, total proteins?=?30.3%, PE?=?2.04%) was obtained at PPFD?=?120?mu mol photons m-2?s-1; therefore, this light intensity should be considered as the most well-suited for A. platensis cultivation in this photobioreactor configuration. The airlift system did not exert any significant positive statistical influence on the responses, which suggests that this traditional cell circulation system could successfully be substituted by the others tested in this work. Biotechnol. Bioeng. 2012; 109:444450. (c) 2011 Wiley Periodicals, Inc.

Existence of solutions and asymtptotic limits of the Euler-Poisson and the quantum drift-diffusion systems

My work concerns two different systems of equations used in the mathematical modeling of semiconductors and plasmas: the Euler-Poisson system and the quantum drift-diffusion system. The first is given by the Euler equations for the conservation of mass and momentum, with a Poisson equation for the electrostatic potential. The second one takes into account the physical effects due to the smallness of the devices (quantum effects). It is a simple extension of the classical drift-diffusion model which consists of two continuity equations for the charge densities, with a Poisson equation for the electrostatic potential. Using an asymptotic expansion method, we study (in the steady-state case for a potential flow) the limit to zero of the three physical parameters which arise in the Euler-Poisson system: the electron mass, the relaxation time and the Debye length. For each limit, we prove the existence and uniqueness of profiles to the asymptotic expansion and some error estimates. For a vanishing electron mass or a vanishing relaxation time, this method gives us a new approach in the convergence of the Euler-Poisson system to the incompressible Euler equations. For a vanishing Debye length (also called quasineutral limit), we obtain a new approach in the existence of solutions when boundary layers can appear (i.e. when no compatibility condition is assumed). Moreover, using an iterative method, and a finite volume scheme or a penalized mixed finite volume scheme, we numerically show the smallness condition on the electron mass needed in the existence of solutions to the system, condition which has already been shown in the literature. In the quantum drift-diffusion model for the transient bipolar case in one-space dimension, we show, by using a time discretization and energy estimates, the existence of solutions (for a general doping profile). We also prove rigorously the quasineutral limit (for a vanishing doping profile). Finally, using a new time discretization and an algorithmic construction of entropies, we prove some regularity properties for the solutions of the equation obtained in the quasineutral limit (for a vanishing pressure). This new regularity permits us to prove the positivity of solutions to this equation for at least times large enough.

Non linear response of planar asymmetric systems

The seismic behaviour of one-storey asymmetric structures has been studied since 1970s by a number of researches studies which identified the coupled nature of the translational-to-torsional response of those class of systems leading to severe displacement magnifications at the perimeter frames and therefore to significant increase of local peak seismic demand to the structural elements with respect to those of equivalent not-eccentric systems (Kan and Chopra 1987). These studies identified the fundamental parameters (such as the fundamental period TL normalized eccentricity e and the torsional-to-lateral frequency ratio Ωϑ) governing the torsional behavior of in-plan asymmetric structures and trends of behavior. It has been clearly recognized that asymmetric structures characterized by Ωϑ >1, referred to as torsionally-stiff systems, behave quite different form structures with Ωϑ <1, referred to as torsionally-flexible systems. Previous research works by some of the authors proposed a simple closed-form estimation of the maximum torsional response of one-storey elastic systems (Trombetti et al. 2005 and Palermo et al. 2010) leading to the so called “Alpha-method” for the evaluation of the displacement magnification factors at the corner sides. The present paper provides an upgrade of the “Alpha Method” removing the assumption of linear elastic response of the system. The main objective is to evaluate how the excursion of the structural elements in the inelastic field (due to the reaching of yield strength) affects the displacement demand of one-storey in-plan asymmetric structures. The system proposed by Chopra and Goel in 2007, which is claimed to be able to capture the main features of the non-linear response of in-plan asymmetric system, is used to perform a large parametric analysis varying all the fundamental parameters of the system, including the inelastic demand by varying the force reduction factor from 2 to 5. Magnification factors for different force reduction factor are proposed and comparisons with the results obtained from linear analysis are provided.

Synthesis and application of stimuli responsive tunable systems based on physical interactions

Novel single step synthetic procedure for hydrophobically modified alkali soluble latexes (HASE) via a miniemulsion-analogous method is presented. This facile method simplifies the copolymerization of the monomers with basically “opposite” character in terms of their hydrophilic/hydrophobic nature, which represent one of the main challenges in water based systems. Considered systems do not represent classical miniemulsions due to a high content of water soluble monomers. However, the polymerization mechanism was found to be rather similar to miniemulsion polymerization process.rnThe influence of the different factors on the system stability has been investigated. The copolymerization behavior studies typically showed strong composition drifts during copolymerization. It was found that the copolymer composition drift can be suppressed via changing the initial monomer ratio.rnThe neutralization behavior of the obtained HASE systems was investigated via potentiometric titration. The rheological behavior of the obtained systems as a function of the different parameters, such as pH, composition (ultrahydrophobe content) and additive type and content has also been investigated.rnDetailed investigation of the storage and loss moduli, damping factor and the crossover frequencies of the samples showed that at the initial stages of the neutralization the systems show microgel-like behavior.rnThe dependence of the rheological properties on the content and the type of the ultrahydrophobe showed that the tuning of the mechanical properties can be easily achieved via minor (few percent) but significant changes in the content of the latter. Besides, changing the hydrophobicity of the ultrahydrophobe via increasing the carbon chain length represents another simple method for achieving the same results.rnThe influence of amphiphilic additives (especially alcohols) on the rheological behavior of the obtained systems has been studied. An analogy was made between micellation of surfactants and the formation of hydrophobic domains between hydrophobic groups of the polymer side chain.rnDilution induced viscosity reduction was investigated in different systems, without or with different amounts or types of the amphiphilic additive. Possibility of the controlled response to dilution was explored. It was concluded that the sensitivity towards dilution can be reduced, and in extreme cases even the increase of the dynamic modulus can be observed, which is of high importance for the setting behavior of the adhesive material.rnIn the last part of this work, the adhesive behavior of the obtained HASE systems was investigated on different substrates (polypropylene and glass) for the standard labeling paper. Wet tack and setting behavior was studied and the trends for possible applications have been evaluated.rnThe novel synthetic procedure, investigation of rheological properties and the possibility of the tuning via additives, investigated in this work create a firm background for the development of the HASE based adhesives as well as rheology modifiers with vast variety of possible applications due to ease of tuning the mechanical and rheological properties of the systems.

The impact of new technologies on distance learning students

This is a European Commission Leonardo da Vinci Reference Material project on the impact of new technology on distance learning students. It is known that all the Ministries of Education of the 27 European Union countries pay millions of Euros annually in the provision of educational technology for their schools, colleges and universities. A review of the literature of the impact of technology, however, showed that the research in this field was unacceptably fragile. What research there was focused on the impact of technology on children in American schools. The project set out, therefore, to measure the impact of technology on adult education, lifelong learning and distance education, with a particular focus on adult distance learning.

Learning through life

Web 2.0 und soziale Netzwerke gaben erste Impulse für neue Formen der Online-Lehre, welche die umfassende Vernetzung von Objekten und Nutzern im Internet nachhaltig einsetzen. Die Vielfältigkeit der unterschiedlichen Systeme erschwert aber deren ganzheitliche Nutzung in einem umfassenden Lernszenario, das den Anforderungen der modernen Informationsgesellschaft genügt. In diesem Beitrag wird eine auf dem Konnektivismus basierende Plattform für die Online-Lehre namens “Wiki-Learnia” präsentiert, welche alle wesentlichen Abschnitte des lebenslangen Lernens abbildet. Unter Einsatz zeitgemäßer Technologien werden nicht nur Nutzer untereinander verbunden, sondern auch Nutzer mit dedizierten Inhalten sowie ggf. zugehörigen Autoren und/oder Tutoren verknüpft. Für ersteres werden verschiedene Kommunikations-Werkzeuge des Web 2.0 (soziale Netzwerke, Chats, Foren etc.) eingesetzt. Letzteres fußt auf dem sogenannten “Learning-Hub”-Ansatz, welcher mit Hilfe von Web-3.0-Mechanismen insbesondere durch eine semantische Metasuchmaschine instrumentiert wird. Zum Aufzeigen der praktischen Relevanz des Ansatzes wird das mediengestützte Juniorstudium der Universität Rostock vorgestellt, ein Projekt, das Schüler der Abiturstufe aufs Studium vorbereitet. Anhand der speziellen Anforderungen dieses Vorhabens werden der enorme Funktionsumfang und die große Flexibilität von Wiki-Learnia demonstriert.

Blended Learning in der Musiklehrerbildung. Erfahrungen und Perspektiven am Beispiel eines Praxisprojekts

In der Lehrerbildung zu Beginn des 21. Jahrhunderts wird einem hohen Bezug zum Berufsfeld Schule, phasenübergreifender Zusammenarbeit und lebenslangem Lernen zunehmend Bedeutung geschenkt. Mehr und mehr kommt in Veröffentlichungen und auf den Internetseiten von Lehrerbildungszentren deutscher Universitäten ein umfassendes Verständnis von Lehrerbildung zum Ausdruck, das alle Phasen der Aus- und Fortbildung von Lehrkräften einschließt: Studium, Vorbereitungsdienst („Referendariat“) und Fortbildungen für Lehrkräfte im Schuldienst. Wenn Lehrerbildung in diesem Sinne gestaltet und nicht reduziert wird auf eine Phase der Ausbildung, die der Tätigkeit im Schuldienst vorangeht, wenn neben den Qualifizierungsmaßnahmen in Studium und Vorbereitungsdienst auch Fortbildungsangebote für bereits im Beruf stehende Lehrkräfte als Selbstverständlichkeit im Rahmen eines lebenslangen Lernprozesses aufgefasst werden, eröffnet die Implementierung digitaler Medien besondere Chancen – etwa im Hinblick auf kooperatives Lernen sowie auf die Arbeit mit und den Zugriff auf Unterrichtsmaterialien. Am Beispiel eines interdisziplinär angelegten Projekts, dessen Ausgangspunkt und Zentrum das Fach Musik bildet und in dem phasenverbindendes und lebenslanges Lernen einen hohen Stellenwert einnehmen, thematisiert dieser Beitrag Möglichkeiten, Perspektiven und Herausforderungen von Blended Learning in der Lehrerbildung. Es handelt sich um einen Einblick in die Verknüpfung von Präsenz- und Online-Anteilen des Projekts und in erste Ergebnisse aus der Projektevaluation. Vorgestellt werden Teilergebnisse aus einer explorativen Studie zur Bedeutung von Kooperationen und phasenübergreifender Vernetzung, im Rahmen derer unter anderem die Akzeptanz und die Relevanz des E-Learning-Angebots thematisiert wird.

Rahmenwerk für zielgruppenorientiertes Blended E-Learning im MINT-Bereich im Kontext des Lebenslangen Lernens

Das heutige Leben der Menschen ist vom Internet durchdrungen, kaum etwas ist nicht „vernetzt“ oder „elektronisch verfügbar“. Die Welt befindet sich im Wandel, die „Informationsgesellschaft“ konsumiert in Echtzeit Informationen auf mobilen Endgeräten, unabhängig von Zeit und Ort. Dies gilt teilweise auch für den Aus- und Weiterbildungssektor: Unter „E-Learning“ versteht man die elektronische Unterstützung des Lernens. Gelernt wird „online“; Inhalte sind digital verfügbar. Zudem hat sich die Lebenssituation der sogenannten „Digital Natives“, der jungen Individuen in der Informationsgesellschaft, verändert. Sie fordern zeitlich und räumlich flexible Ausbildungssysteme, erwarten von Bildungsinstitutionen umfassende digitale Verfügbarkeit von Informationen und möchten ihr Leben nicht mehr Lehr- und Zeitplänen unterordnen – das Lernen soll zum eigenen Leben passen, lebensbegleitend stattfinden. Neue „Lernszenarien“, z.B. für alleinerziehende Teilzeitstudierende oder Berufstätige, sollen problemlos möglich werden. Dies soll ein von der europäischen Union erarbeitetes Paradigma leisten, das unter dem Terminus „Lebenslanges Lernen“ zusammengefasst ist. Sowohl E-Learning, als auch Lebenslanges Lernen gewinnen an Bedeutung, denn die (deutsche) Wirtschaft thematisiert den „Fachkräftemangel“. Die Nachfrage nach speziell ausgebildeten Ingenieuren im MINT-Bereich soll schnellstmöglich befriedigt, die „Mitarbeiterlücke“ geschlossen werden, um so weiterhin das Wachstum und den Wohlstand zu sichern. Spezielle E-Learning-Lösungen für den MINT-Bereich haben das Potential, eine schnelle sowie flexible Aus- und Weiterbildung für Ingenieure zu bieten, in der Fachwissen bezogen auf konkrete Anforderungen der Industrie vermittelt wird. Momentan gibt es solche Systeme allerdings noch nicht. Wie sehen die Anforderungen im MINT-Bereich an eine solche E-Learning-Anwendung aus? Sie muss neben neuen Technologien vor allem den funktionalen Anforderungen des MINTBereichs, den verschiedenen Zielgruppen (wie z.B. Bildungsinstitutionen, Lerner oder „Digital Natives“, Industrie) und dem Paradigma des Lebenslangen Lernens gerecht werden, d.h. technische und konzeptuelle Anforderungen zusammenführen. Vor diesem Hintergrund legt die vorliegende Arbeit ein Rahmenwerk für die Erstellung einer solchen Lösung vor. Die praktischen Ergebnisse beruhen auf dem Blended E-Learning-System des Projekts „Technische Informatik Online“ (VHN-TIO).

A Research Roadmap for Complementary and Alternative Medicine – What We Need to Know by 2020

Background: The CAMbrella coordination action was funded within the Framework Programme 7. Its aim is to provide a research roadmap for clinical and epidemiological research for complementary and alternative medicine (CAM) that is appropriate for the health needs of European citizens and acceptable to their national research institutes and healthcare providers in both public and private sectors. One major issue in the European research agenda is the demographic change and its impact on health care. Our vision for 2020 is that there is an evidence base that enables European citizens to make informed decisions about CAM, both positive and negative. This roadmap proposes a strategic research agenda for the field of CAM designed to address future European health care challenges. This roadmap is based on the results of CAMbrella’s several work packages, literature reviews and expert discussions including a consensus meeting. Methods: We first conducted a systematic literature review on key issues in clinical and epidemiological research in CAM to identify the general concepts, methods and the strengths and weaknesses of current CAM research. These findings were discussed in a workshop (Castellaro, Italy, September 7–9th 2011) with international CAM experts and strategic and methodological recommendations were defined in order to improve the rigor and relevance of CAM research. These recommendations provide the basis for the research roadmap, which was subsequently discussed in a consensus conference (Järna, Sweden, May 9–11th 2012) with all CAMbrella members and the CAMbrella advisory board. The roadmap was revised after this discussion in CAMbrella Work Package (WP) 7 and finally approved by CAMbrella’s scientific steering committee on September 26th 2012. Results: Our main findings show that CAM is very heterogenous in terms of definitions and legal regulations between the European countries. In addition, citizens’ needs and attitudes towards CAM as well as the use and provision of CAM differ significantly between countries. In terms of research methodology, there was consensus that CAM researchers should make use of all the commonly accepted scientific research methods and employ those with utmost diligence combined in a mixed methods framework. Conclusions: We propose 6 core areas of research that should be investigated to achieve a robust knowledge base and to allow stakeholders to make informed decisions. These are: Research into the prevalence of CAM in Europe: Reviews show that we do not know enough about the circumstances in which CAM is used by Europeans. To enable a common European strategic approach, a clear picture of current use is of the utmost importance. Research into differences regarding citizens’ attitudes and needs towards CAM: Citizens are the driver for CAM utilization. Their needs and views on CAM are a key priority, and their interests must be investigated and addressed in future CAM research. Research into safety of CAM: Safety is a key issue for European citizens. CAM is considered safe, but reliable data is scarce although urgently needed in order to assess the risk and cost-benefit ratio of CAM. Research into the comparative effectiveness of CAM: Everybody needs to know in what situation CAM is a reasonable choice. Therefore, we recommend a clear emphasis on concurrent evaluation of the overall effectiveness of CAM as an additional or alternative treatment strategy in real-world settings. Research into effects of context and meaning: The impact of effects of context and meaning on the outcome of CAM treatments must be investigated; it is likely that they are significant. Research into different models of CAM health care integration: There are different models of CAM being integrated into conventional medicine throughout Europe, each with their respective strengths and limitations. These models should be described and concurrently evaluated; innovative models of CAM provision in health care systems should be one focus for CAM research. We also propose a methodological framework for CAM research. We consider that a framework of mixed methodological approaches is likely to yield the most useful information. In this model, all available research strategies including comparative effectiveness research utilising quantitative and qualitative methods should be considered to enable us to secure the greatest density of knowledge possible. Stakeholders, such as citizens, patients and providers, should be involved in every stage of developing the specific and relevant research questions, study design and the assurance of real-world relevance for the research. Furthermore, structural and sufficient financial support for research into CAM is needed to strengthen CAM research capacity if we wish to understand why it remains so popular within the EU. In order to consider employing CAM as part of the solution to the health care, health creation and self-care challenges we face by 2020, it is vital to obtain a robust picture of CAM use and reliable information about its cost, safety and effectiveness in real-world settings. We need to consider the availability, accessibility and affordability of CAM. We need to engage in research excellence and utilise comparative effectiveness approaches and mixed methods to obtain this data. Our recommendations are both strategic and methodological. They are presented for the consideration of researchers and funders while being designed to answer the important and implicit questions posed by EU citizens currently using CAM in apparently increasing numbers. We propose that the EU actively supports an EUwide strategic approach that facilitates the development of CAM research. This could be achieved in the first instance through funding a European CAM coordinating research office dedicated to foster systematic communication between EU governments, public, charitable and industry funders as well as researchers, citizens and other stakeholders. The aim of this office would be to coordinate research strategy developments and research funding opportunities, as well as to document and disseminate international research activities in this field. With the aim to develop sustainability as second step, a European Centre for CAM should be established that takes over the monitoring and further development of a coordinated research strategy for CAM, as well as it should have funds that can be awarded to foster high quality and robust independent research with a focus on citizens health needs and pan-European collaboration. We wish to establish a solid funding for CAM research to adequately inform health care and health creation decision-making throughout the EU. This centre would ensure that our vision of a common, strategic and scientifically rigorous approach to CAM research becomes our legacy and Europe’s reality. We are confident that our recommendations will serve these essential goals for EU citizens.

Standards and specifications to manage accessibility issues in e-learning

Despite the acknowledged need of providing a personalized and adaptive learning process for all, current learning management systems do not properly cover personalization and accessibility issues and they are still struggling to support the reusability requirements coming from the pervasive usage of standards. There is a lack of frameworks for providing layered-based infrastructure covering the interoperability required to manage the whole range of standards, applications and services needed to meet accessibility and adaptations needs of lifelong learning services.

Modelado dinámico y control de maniobras de dispositivos submarinos

Es bien conocido por todos que la Primera Revolución Industrial, que tuvo su inicio en la segunda mitad del Siglo XVIII, conllevó un aumento del uso de los recursos energéticos que no se ha detenido para llegar a los niveles de desarrollo tecnológico, industrial y de calidad de vida, de los que se dispone en la actualidad. A simple vista podría intuirse que para disponer de un mayor nivel tecnológico, industrial, de confort, etc. sea necesario un mayor consumo de energía primaria. La actual generación de energía está principalmente basada en el procesamiento de los diversos compuestos del carbono (hidrocarburos, gases y productos derivados del petróleo), que son contaminantes y además, se agotan. Desde hace unas pocas décadas, la humanidad ha sido consciente que es necesario generar energía a partir de fuentes de origen renovable, y que además resulten menos contaminantes. Así, en la actualidad, se ha llegado a un estado de desarrollo avanzado para la explotación de diversas fuentes de energías como la eólica, a la vez que se comienza a mirar con realismo la posibilidad de explotación de diversas energías de origen marino. Se considera que las energías renovables procedentes de los océanos que se encuentran más desarrolladas tecnológicamente hablando, sin tener en cuenta la energía eólica fuera costa (offshore), son la denominada energía undimotriz o de las olas y la energía de las corrientes marinas, no necesariamente en este orden. El trabajo propuesto en esta Tesis se centra en este último recurso energético y, aunque no se dispone todavía de ningún dispositivo en fase de explotación comercial, la concepción, diseño y desarrollo de dispositivos para la extracción de energía de las corrientes, y su evolución, han sido relativamente rápidos e importantes en estos últimos años. Existen ya diferentes dispositivos en fase de pruebas con resultados muy prometedores. Aunque los dispositivos actuales se encuentran limitados a la explotación energética en zonas de poca profundidad, los diferentes estudios del recurso indican la necesidad de explotar corrientes marinas a mayores profundidades, para lo que se están desarrollando actualmente dispositivos, cuya evolución en lo que a sistemas de fondeo se refiere, está siendo muy parecida a la que se ha producido en los parques eólicos fuera costa, similar a su vez, a la evolución llevada a cabo en las plataformas oceánicas para la explotación de recursos petrolíferos (denominados oil & gas) que se extraen de profundidades cada vez mayores. Las soluciones tecnológicas que resulten válidas han de ser también económicamente viables, y en la actualidad se requiere todavía reducir costos en todas las fases de instalación, explotación y mantenimiento de estos dispositivos, sea cual sea su profundidad de operación. Uno de los focos de estudio para abaratar los costes de explotación en general, pasa por abaratar y reducir los costes en las maniobras necesarias de inmersión (de la superficie del mar a la profundidad de operación) y emersión (de la profundidad de operación a la superficie del mar) de estos dispositivos, para llevar a cabo tareas de mantenimiento in situ, en el mar, y sin necesidad de buques especializados ni de su transporte a tierra. En esta Tesis se propone, en primer lugar, un método para evaluar el ciclo de vida de diversos dispositivos de aprovechamiento de las corrientes marinas. Se evidencia que el coste de la energía así generada sigue siendo no plenamente competitivo, por lo que se requiere avanzar en el abaratamiento de costes, principalmente en la instalación y en su mantenimiento. Para ello se propone como novedad principal, introducir sistemas de control en lazo cerrado para realizar maniobras de instalación y mantenimiento de forma automática. También se aporta un modelo dinámico original y muy sencillo para dispositivos bajo estos movimientos de emersión/inmersión, a partir del cual se han desarrollado los algoritmos de control para el propósito mencionado, que no es otro sino automatizar en todo lo posible las maniobras completas. Los algoritmos de control propuestos han sido validados mediante simulación. Se proponen trayectorias de referencia de movimiento suaves (smooth) similares a las utilizadas en robótica. Estos movimientos de cambios de profundidad en lazo cerrado, combinados con secuencias de movimientos en bucle abierto para cuando el dispositivo interacciona en la superficie libre, han dado lugar a nuevas maniobras completas de instalación y mantenimiento que se presentan en esta Tesis, diferentes a las actuales. Finalmente, y como justificación de la viabilidad económica del método novedoso aportado, se ha realizado un estudio comparativo de los costes de la tecnología propuesta, frente a la tecnología actual. Este nuevo sistema de maniobras automáticas implica un ciclo de vida diferente para los dispositivos de aprovechamiento de la energía de las corrientes, ciclo que se cuantifica a partir de un dispositivo base que ha sido modificado y adaptado para la nueva tecnología propuesta, demostrando su viabilidad tanto técnica como económica. ABSTRACT It’s well known that the First Industrial Revolution started in the second half of the eighteenth century, carried the increasing of the use of energy resource which have not been stopped until reach the present technology, industrial evolution and daily life quality. On the surface, it can be known intuitively that a higher consumption of primary energy resource is demanded for benefiting from a higher technological industrial and daily life level. Today, the generation of energy is mainly based in the processing of carbon products (hydrocarbons, gases and petroleum products) which are pollutants, and additionally, are depleted. From a few decades ago, the humanity is aware the energy should be obtained from renewable resources, which besides, should be cleaner. So, at the present, a technical develop has been gained to exploit several energy source, as wind energy, and, at the same time, the extraction of the marine energy starts to seem as a reality. The renewable marine energies considered more advanced and technically developed, without keeping in mind, the offshore wind energy, are the wave energy and the tidal current energy, not necessarily in that order. This Thesis is focused in this last energy resource, and, although, any device is under commercial operation, the concept, design and develop of this type of devices to extract the tidal current energy and their evolution has been comparatively fast and important the last years. There are several devices under test with promising results. Even through the current devices are limited to lower depth areas, the several studies of the tidal energy resource suggest the need to exploit the marine current at greater depths to what is being developed devices, where their evolution in the anchoring system is being very similar to the evolution performed in the offshore wind farms, which is at the same time, similar to the evolution in the oil and gas exploitation which are extracted to greatest depths. Viable technical solutions should be also viable economically and nowadays the cost in all phases of the project (installation, maintenance and operation) should be decreased whatever the operation depth is. One focus of study to lower the operation cost is the cost decreasing of immersion manoeuvring operations (from sea surface to the operation depth) and immersion manoeuvring operations (from operation depth to the sea surface), therefore the maintenance operations can be performed on – site, in the sea, and no specialized vessels are required to transport the devices from the sea to shore. In this dissertation, firstly is proposed a method to evaluate the life cycle of the tidal energy current devices. It is proved the energy generated by these devices is not fully competitive; therefore, the cost falling is mainly an objective in the installation and the maintenance operations. For that, it is proposed as main novelty, the using of closed loop control systems to perform the automatic installation and manoeuvring operations. It is also contributed with an original and simple dynamic model and for controlling the immersion/emersion movements of these devices, from which the control algorithms are developed in order to automate as much as possible the complete manoeuvring. The control algorithms proposed has been validated by simulations. Reference paths with smooth movements, similar which are used in robotics, are suggested. These movements to change the depth using closed loop control, combined with the sequences in open loop movements when the device is in free surface, have been development for a new complete manoeuvring to installation and maintenance operations which are advanced in this Thesis and they are different to the present manoeuvrings. Finally and as justification of the economic viability of this original method, a comparative cost study between the technology proposed and the current technology is performed. This new automatic manoeuvring system involves a different life cycle for the tidal energy current devices, cycle that is quantified from a base device which has been modified and adapted for the new proposed technology, showing the technical and economic viability.

Extending working life in Belgium. CEPS Working Document No. 386, 22 November 2013

This report aims at understanding how persons aged 50 years and older are and can be integrated into the working society in Belgium. We are interested in how people in this age group can be induced to engage in various forms of employment and lifelong learning. Based on secondary literature, descriptive databases as well as interviews with experts and focus groups, we find that the discussion on active ageing in Belgium is well advanced with numerous contributions by academics, stakeholders, social partners, the public administration and interest groups. The wish to retire at 60 is widely shared, but at the same time the majority of Belgium’s elderly are able and would be willing to work under specific conditions. Therefore, we recommend that Belgium should invest in more flexible systems including a revision of the tax scheme, such as the part-time retirement system proposed by the insurance company Delta Lloyd. An equally relevant recommendation would be to ensure that public employment agencies, employers and agencies that provide training encourage all workers to work and learn regardless of their age.