Percutaneous aortic valve replacement: valvuloplasty studies in vitro

Valvuloplasty of the aortic valve is currently used in selected patients for severe calcified aortic valve disease, but clinical effectiveness is low and complication rate remains high. In this study, the total particle load after valvuloplasty and the embolization risk of calcific debris into the coronary arteries was analyzed in an in vitro model.

Analgesic activity of a non-peptide imidazolidinedione somatostatin agonist: in vitro and in vivo studies in rat

Several lines of evidence support an important role for somatostatin receptors (SSTRs) in pain modulation. The therapeutic use of established SSTR peptide agonists for this indication is limited by their broad range of effects, need for intrathecal delivery, and short half-life. Therefore, the goal of the present study was to investigate the analgesic effect of SCR007, a new, highly selective SSTR2 non-peptide agonist. Behavioral studies demonstrated that paw withdrawal latencies to heat were significantly increased following intraplantar SCR007. Furthermore, both intraperitoneal and intraplantar injection of SCR007 significantly reduced formalin- and capsaicin-induced flinching and lifting/licking nociceptive behaviors. Recordings from nociceptors using an in vitro glabrous skin-nerve preparation showed that SCR007 reduced heat responses in a dose-dependent fashion, bradykinin-induced excitation, heat sensitization and capsaicin-induced excitation. In both the behavioral and single fiber studies, the SCR007 effects were reversed by the SSTR antagonist cyclo-somatostatin, demonstrating receptor specificity. In the single fiber studies, the opioid antagonist naloxone did not reverse SCR007-induced anti-nociception suggesting that SCR007 did not exert its effects through activation of opioid receptors. Analysis of cAMP/protein kinase A (PKA) involvement demonstrated that SCR007 prevented forskolin- and Sp-8-Br-cAMPS (a PKA activator)-induced heat sensitization, supporting the hypothesis that SCR007-induced inhibition could involve a down-regulation of the cAMP/PKA pathway. These data provide several lines of evidence that the non-peptide imidazolidinedione SSTR2 agonist SCR007 is a promising anti-nociceptive and analgesic agent for the treatment of pain of peripheral and/or central origin.

Nano Aerosol Chamber for In-Vitro Toxicity (NACIVT) studies.

Abstract Inhalation of ambient air particles or engineered nanoparticles (NP) handled as powders, dispersions or sprays in industrial processes and contained in consumer products pose a potential and largely unknown risk for incidental exposure. For efficient, economical and ethically sound evaluation of health hazards by inhaled nanomaterials, animal-free and realistic in vitro test systems are desirable. The new Nano Aerosol Chamber for in-vitro Toxicity studies (NACIVT) has been developed and fully characterized regarding its performance. NACIVT features a computer-controlled temperature and humidity conditioning, preventing cellular stress during exposure and allowing long-term exposures. Airborne NP are deposited out of a continuous air stream simultaneously on up to 24 cell cultures on Transwell® inserts, allowing high-throughput screening. In NACIVT, polystyrene as well as silver particles were deposited uniformly and efficiently on all 24 Transwell® inserts. Particle-cell interaction studies confirmed that deposited particles reach the cell surface and can be taken up by cells. As demonstrated in control experiments, there was no evidence for any adverse effects on human bronchial epithelial cells (BEAS-2B) due to the exposure treatment in NACIVT. The new, fully integrated and transportable deposition chamber NACIVT provides a promising tool for reliable, acute and sub-acute dose-response studies of (nano)particles in air-exposed tissues cultured at the air-liquid interface.

Binding studies on isolated porcine small intestinal mucosa and in vitro toxicity studies reveal lack of effect of C. perfringens beta-toxin on the porcine intestinal epithelium

Beta-toxin (CPB) is the essential virulence factor of C. perfringens type C causing necrotizing enteritis (NE) in different hosts. Using a pig infection model, we showed that CPB targets small intestinal endothelial cells. Its effect on the porcine intestinal epithelium, however, could not be adequately investigated by this approach. Using porcine neonatal jejunal explants and cryosections, we performed in situ binding studies with CPB. We confirmed binding of CPB to endothelial but could not detect binding to epithelial cells. In contrast, the intact epithelial layer inhibited CPB penetration into deeper intestinal layers. CPB failed to induce cytopathic effects in cultured polarized porcine intestinal epithelial cells (IPEC-J2) and primary jejunal epithelial cells. C. perfringens type C culture supernatants were toxic for cell cultures. This, however, was not inhibited by CPB neutralization. Our results show that, in the porcine small intestine, CPB primarily targets endothelial cells and does not bind to epithelial cells. An intact intestinal epithelial layer prevents CPB diffusion into underlying tissue and CPB alone does not cause direct damage to intestinal epithelial cells. Additional factors might be involved in the early epithelial damage which is needed for CPB diffusion towards its endothelial targets in the small intestine.

Osteoblast Response to Commercially Available Ti-6Al-4V and Novel Porous Tantalum. In Vitro Biocompatibility Studies

The response of human osteoblasts to materials is crucial for evaluating biocompatibility of an implant material for bone defects. Previous work in our lab demonstrated that the response of human osteoblasts to orthopaedic and dental materials in vitro varies depending on the sex and age of the patient [1]. Osteoblasts from female patients older than 60 years old, adhered less and produced less matrix proteins and calcification than osteoblasts from younger female patients and all ages of male patients. Recently developed, porous tantalum demonstrates improved biomechanical properties for bone and good biocompatibility in in vivo human studies, however there are few, if any, in vitro biocompatibility studies on this material. In this project, we aimed to compare the phenotypic expression of human osteoblasts from young and old female patients to commercially available Ti-6Al-4V and porous tantalum in a well-developed in vitro system. 1. Zhang H, Lewis CG, Aronow MS, Gronowicz G. The effect of patient age on human osteoblasts’ response to Ti-6Al-4V implants in vitro. J. Orthop. Res. 2004;22(1):30-8.

In vitro evolution of a highly replicating, doxycycline-dependent HIV for applications in vaccine studies

A major concern associated with the use of vaccines based on live-attenuated viruses is the possible and well documented reversion to pathogenic phenotypes. In the case of HIV, genomic deletions or mutations introduced to attenuate viral pathogenicity can be repaired by selection of compensating mutations. These events lead to increased virus replication rates and, eventually, disease progression. Because replication competence and degree of protection appear to be directly correlated, further attenuation of a vaccine virus may compromise the ability to elicit a protective immune response. Here, we describe an approach toward a safe attenuated HIV vaccine. The system is not based on permanent reduction of infectivity by alteration of important viral genomic sequences, but on strict control of replication through the insertion of the tetracycline (Tet) system in the HIV genome. Furthermore, extensive in vitro evolution was applied to the prototype Tet-controlled HIV to select for variants with optimized rather than diminished replication capacity. The final product of evolution has properties uniquely suited for use as a vaccine strain. The evolved virus is highly infectious, as opposed to a canonically attenuated virus. It replicates efficiently in T cell lines and in activated and unstimulated peripheral blood mononuclear cells. Most importantly, replication is strictly dependent on the nontoxic Tetanalogue doxycycline and can be turned on and off. These results suggest that this in vitro evolved, doxycycline-dependent HIV might represent a useful tool toward the development of a safer, live-attenuated HIV vaccine.

Nutraceutical approach to the modulation of cholesterol metabolism: in vitro and in vivo studies

Negli ultimi anni, si sono diffusi nuove strategie per il trattamento delle malattie cardiovascolari, che possano supportare una terapia medica, o in alcuni casi, sostituirla. Infatti, l’abbandono delle terapie è il più importante problema di salute pubblica del mondo occidentale, soprattutto per le malattie croniche. Ciò è dovuto alla complessità delle terapie farmacologiche e ai numerosi e in alcuni casi gravi effetti collaterali dei farmaci somministrati. Di conseguenza, una riduzione di questi effetti migliorerebbe le condizioni di vita del paziente e quindi diminuirebbe il rischio di abbandono della terapia. Per ottenere ciò, è possibile affiancare al trattamento farmacologico una terapia nutraceutica, consistente nella somministrazione di complessi molecolari o microorganismi, provenienti da piante, latte o cibi funzionali. Lo scopo generale di questo studio è indagare le attività ipolipidemizzanti di un composto nutraceutico e di un ceppo batterio specifico nel modello animale che presenta elevati alti livelli plasmatici di colesterolo. Inoltre, sono stati analizzati gli effetti del trattamento nutraceutico sui meccanismi fisiologici che contrastano la creazione della placca aterosclerotica come l’efflusso di colesterolo dalle “foam cells” presenti nell’ateroma, o la riduzione dell’assorbimento intestinale di colesterolo. La presente tesi è divisa in due parti. Nella prima parte, abbiamo analizzato la capacità dei Bifidobacteria di ridurre i livelli di colesterolo nel medium di crescita. Dall’analisi, si è osservato che vari ceppi del genere Bifidobacteria presentano un’ampia capacità di assimilazione del colesterolo all’interno della cellula batterica, in particolare il Bifidobacterium bifidum PRL2010. Le analisi di trascrittomica del Bb PRL2010 incubato in presenza di colesterolo, hanno rivelato un significativo aumento dei livelli di trascrizione di geni codificanti trasportatori e riduttasi, responsabili del meccanismo di accumulo all’interno della cellula batterica e della conversione del colesterolo in coprostanolo. L’attività ipolipidemizzante del Bb PRL2010 è stata poi valutata nel modello murino, mostrando la modificazione del microbiota dei topi trattati dopo somministrazione del batterio in questione. Nella seconda parte del progetto di ricerca, abbiamo indagato sugli effetti di un composto coperto da brevetto, chiamato “Ola”, sull’efflusso di colesterolo di criceti trattati con questo composto nutraceutico. L’efflusso di colesterolo è il primo step del meccanismo fisiologico noto come Trasporto Inverso del Colesterolo, che consente l’eliminazione del colesterolo dalle placche aterosclerotiche, attraverso l’interazione fra le HDL, presenti nella circolazione sanguigna, e specifici trasportatori delle foam cells, come ABCA1/G1 e SR-BI. In seguito, le lipoproteine rilasciano il colesterolo alle cellule epatiche, dove è metabolizzato ed escreto attraverso le feci. Per valutare l’effetto dell’Ola sul profilo lipidico dei criceti, sono state condotte analisi in vitro. I risultati mostrano un aumento dell’efflusso di colesterolo in cellule che esprimono il trasportatore ABCA1, comparato con il gruppo controllo. Questi due studi mostrano come l’approccio nutraceutico può essere un importante modo per contrastare l’aterosclerosi. Come mostrato in letteratura, gli effetti dei composti nutraceutici sull’aterosclerosi e su altre malattie croniche, hanno portato a un ampio uso come supporto alle terapie farmacologiche, ed in alcuni casi hanno rimpiazzato la terapia farmacologica stessa.

A new rapidly absorbed paracetamol tablet containing sodium bicarbonate. II. Dissolution studies and in vitro/in vivo correlation

The objective of this study was to compare the in vitro dissolution profile of a new rapidly absorbed paracetamol tablet containing sodium bicarbonate (PS) with that of a conventional paracetamol tablet (P), and to relate these by deconvolution and mapping to in vivo release. The dissolution methods used include the standard procedure described in the USP monograph for paracetamol tablets, employing buffer at pH5.8 or 0.05 M HCl at stirrer speeds between 10 and 50 rpm. The mapping process was developed and implemented in Microsoft Excel® worksheets that iteratively calculated the optimal values of scale and shape factors which linked in vivo time to in vitro time. The in vitro-in vivo correlation (IVIVC) was carried out simultaneously for both formulations to produce common mapping factors. The USP method, using buffer at pH5.8, demonstrated no difference between the two products. However, using an acidic medium the rate of dissolution of P but not of PS decreased with decreasing stirrer speed. A significant correlation (r=0.773; p<.00001) was established between in vivo release and in vitro dissolution using the profiles obtained with 0.05 M HCl and a stirrer speed of 30 rpm. The scale factor for optimal simultaneous IVIVC in the fasting state was 2.54 and the shape factor was 0.16; corresponding values for mapping in the fed state were 3.37 and 0.13 (implying a larger in vitro-in vivo time difference but reduced shape difference in the fed state). The current IVIVC explains, in part, the observed in vivo variability of the two products. The approach to mapping may also be extended to different batches of these products, to predict the impact of any changes of in vitro dissolution on in vivo release and plasma drug concentration-time profiles.

Lipoplexes formulation and optimisation:in vitro transfection studies reveal no correlation with in vivo vaccination studies

The aim of these studies was to compare the effect of liposome composition on physico-chemical characteristics and transfection efficacy of cationic liposomes both in vitro and in vivo. Comparison between 4 popularly used cationic lipids, showed 3b-N-(dimethylaminoethyl)carbamate (DC-Chol) to promote the highest transfect levels in cells in vitro with levels being at least 6 times higher than those of 1,2-di-O-octadecenyl-3-trimethylammonium propane (DOTMA). 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP), and dimethyldioctadecylammonium (DDA) and approximately twice as efficient as dipalmitoyl-trimethylammonium-propane (DPTAP). To establish the role of the helper lipid, DC-Chol liposomes were formulated in combination with either 1,2-dioleoyl-sn-glycero-3-phosphatidylethanolamine (DOPE) or cholesterol (Chol) (1:1 molar ratio) with and without the addition of phosphatidyl choline. The choice of helper lipid incorporated within the bilayer was found to influence the formation of complexes, their resultant structure and their transfection efficiency in vitro, with SUV-DNA complexes containing optimum levels of DOPE giving higher transfection than those containing cholesterol. The inclusion of PC within the formulation also reduced transfection efficiency in vitro. However, when administered in vivo, SUV-DNA complexes composed of PC:Chol:DC-Chol at a molar ratio of 16:8:4 micromole/ml were the most effective at inducing splenocyte proliferation upon exposure to antigen in comparison to control spleens. These results demonstrate that there is no in vitro/in vivo correlation between the transfection efficacy of these liposome formulations and in vitro transfection in the above cell model cannot be taken as a reliable indicator for in vivo efficacy of DNA vaccines.

Characterisation of electrospun polystyrene scaffolds for three-dimensional in vitro biological studies

The purpose of this study was to produce a well-characterised electrospun polystyrene scaffold which could be used routinely for three-dimensional (3D) cell culture experimentation. A linear relationship (p<0.01p<0.01) between three principal process variables (applied voltage, working distance and polymer concentration) and fibre diameter was reliably established enabling a mathematical model to be developed to standardise the electrospinning process. Surface chemistry and bulk architecture were manipulated to increase wetting and handling characteristics, respectively. X-ray photoelectron spectroscopy (XPS) confirmed the presence of oxygen-containing groups after argon plasma treatment, resulting in a similar surface chemistry to treated tissue culture plastic. The bulk architecture of the scaffolds was characterised by scanning electron microscopy (SEM) to assess the alignment of both random and aligned electrospun fibres, which were calculated to be 0.15 and 0.66, respectively. This compared to 0.51 for collagen fibres associated with native tissue. Tensile strength and strain of approximately of 0.15 MPa and 2.5%, respectively, allowed the scaffolds to be routinely handled for tissue culture purposes. The efficiency of attachment of smooth muscle cells to electrospun scaffolds was assessed using a modified 3-[4,5-dimethyl(thiazol-2yl)-3,5-diphery] tetrazolium bromide assay and cell morphology was assessed by phalloidin-FITC staining of F-actin. Argon plasma treatment of electrospun polystyrene scaffold resulted in significantly increased cell attachment (p<0.05p<0.05). The alignment factors of the actin filaments were 0.19 and 0.74 for the random and aligned scaffold respectively, compared to 0.51 for the native tissue. The data suggests that electrospinning of polystyrene generates 3D scaffolds which complement polystyrene used in 2D cell culture systems.

Structural design of contact lens-based drug delivery systems; in vitro and in vivo studies of ocular triggering mechanisms

This study identifies and investigates the potential use of in-eye trigger mechanisms to supplement the widely available information on release of ophthalmic drugs from contact lenses under passive release conditions. Ophthalmic dyes and surrogates have been successfully employed to investigate how these factors can be drawn together to make a successful system. The storage of a drug-containing lens in a pH lower than that of the ocular environment can be used to establish an equilibrium that favours retention of the drug in the lens prior to ocular insertion. Although release under passive conditions does not result in complete dye elution, the use of mechanical agitation techniques which mimic the eyelid blink action in conjunction with ocular tear chemistry promotes further release. In this way differentiation between passive and triggered in vitro release characteristics can be established. Investigation of the role of individual tear proteins revealed significant differences in their ability to alter the equilibrium between matrix-held and eluate-held dye or drug. These individual experiments were then investigated in vivo using ophthalmic dyes. Complete elution was found to be achievable in-eye; this demonstrated the importance of that fraction of the drug retained under passive conditions and the triggering effect of in-eye conditions on the release process. Understanding both the structure-property relationship between drug and material and in-eye trigger mechanisms, using ophthalmic dyes as a surrogate, provides the basis of knowledge necessary to design ocular drug delivery vehicles for in-eye release in a controllable manner.