Tudo é um: fluxo entre desenho e verbo

Nesta Dissertação, investigo o conjunto de desenhos que denominei desenhos-conceitos e que constituem-se como uma prática processual da minha atuação enquanto artista. Tal investigação é percorrida através de seis tangentes transdisciplinares na tentativa de estabelecer pontos de contato entre a prática do Desenho e outras práticas contemporâneas investigativas do conhecimento humano. São elas: Tangente Diagramas, Tangente Cosmologia, Tangente Desenhos, Tangente Linguística, Tangente Lógica/Matemática e Tangente Escritura. A pesquisa procura estabelecer uma maior proximidade entre teoria e obra apresentando-se como texto dissertivo e também como a elaboração de um Fichário. Neste Fichário o léxico dos desenhos-conceitos é apresentado em conjunto com uma série de anotações que permearam a investigação e ambos, desenhos-conceitos e anotações, configuram-se como pontos-chave para a formação da arquitetura conceitual do léxico. Tanto o texto dissertivo quanto as anotações e desenhos presentes no Fichário tecem indagações acerca da relação entre o espaço-tempo e o corpo daquele que performa ações. A pesquisa conclui na abertura de novos procedimentos práticos, através da ideia de performatividade na realização de ações, com as obras Desire to communicate e Obscena.

Análises genéticas de carcaças de atobá marrom, Sula leucogaster (Boddaert, 1783), da região centro-norte do Estado do Rio de Janeiro

A região da Bacia de Campos está exposta a diversas atividades antrópicas, que interferem diretamente no funcionamento do ecossistêmico marinho. O estudo da fauna marinha na costa centro-norte fluminense mostra grande relevância, diversas aves marinhas residem ou passam grande parte de seu período migratório ao longo da Bacia de Campos, entre elas está Sula leucogaster (Boddaert, 1783). Embora essas aves sejam altamente móveis, suas populações apresentam uma estrutura populacional genética robusta. Com o intuito de verificar a estruturação e as relações evolutivas da população de Sula leucogaster na Bacia de Campos foram recolhidas 91 amostras de encalhe e os dados gerados para esta região foram comparados com dados já publicados de outras bacias oceânicas. A partir da região controle do DNA mitocondrial foram gerados 26 haplótipos, todos exclusivos da Bacia de Campos, muitos raros e apenas oito possuíram frequência comum. As análises mostraram que a população da Bacia de Campos é um estoque genético de Sula leucogaster. Tal fato pode ser atribuído ao comportamento filopátrico e ao hábito costeiro dessa espécie que impede o fluxo gênico entre populações. Além disso, a população da Bacia de Campos detém baixa variabilidade genética e possivelmente está sofrendo efeito gargalo ou seleção purificadora, corroborados por valores do teste Fu, o que é comum para espécies que se dividem em subpopulações. Os dados filogenéticos demonstram um contato recente entre as populações da Bacia de Campos e da ilha de Ascensão. As condições oceanográficas também têm influência na estruturação de populações de Sula leucogaster, visto que a ausência de barreiras e a proximidade geográfica poderiam favorecer contato secundário com o Mar do Caribe, fato não evidenciado nas análises. Sendo assim, a divergência de populações nessa espécie e a baixa variabilidade genética são fatores preocupantes para a manutenção da população de atobás marrons em uma área de grande impacto ambiental

Efeitos genotóxicos e indução do SOS em mutantes derivados de Escherichia coli K-12 durante o processo de interação com superfícies bióticas e abióticas

A célula epitelial é o primeiro contato entre os micro-organismos e o hospedeiro. Essa interação pode levar a produção de diversas citocinas, quimiocinas, moléculas inflamatórias e também estimular a geração de espécies reativas de oxigênio (ERO). Neste trabalho avaliamos se a interação com as células HEp-2 poderia ser genotóxica para os mutantes derivados de Escherichia coli K-12 deficientes em algumas enzimas que fazem parte do sistema de reparo por excisão de base (BER). Além disto, avaliamos a expressão do sistema SOS, que é induzido pela presença de danos no genoma bacteriano. Os resultados obtidos mostraram a presença de filamentos, na interação com células HEp-2, principalmente, no mutante xthA (BW9091) e no triplo mutante xthA nfo nth (BW535). Quando a interação foi quantificada na ausência da D-manose, observamos um aumento das bactérias aderidas. Além disto, a quantidade e o tamanho dos filamentos também aumentaram, mostrando que as adesinas manose-sensíveis estavam envolvidas na filamentação bacteriana. Para comprovar se o aumento da filamentação observada neste ensaio foram uma consequência da indução do sistema SOS, desencadeada pela interação com as células HEp-2, quantificamos a expressão do SOS, na presença e na ausência da D-manose. De fato, observamos que a indução do SOS na ausência da D-manose foi maior, quando comparada, com o ensaio realizado na presença de D-manose. Além disto, observamos que a ausência de xthA foi importante para o aumento da filamentação observada na ausência de D-manose. Diante destes resultados, verificamos se a resposta de filamentação ocorreria quando as bactérias interagiam com uma superfície abiótica como o vidro. Observamos também inúmeros filamentos nos mutantes BER, BW9091 e BW535, quando comparados a cepa selvagem AB1157. Essa filamentação foi associada à indução do SOS, em resposta a interação das bactérias com o vidro. Em parte a filamentação e a indução do SOS observadas na interação ao vidro, foram associadas à produção de ERO. Quantificamos também o número de bactérias aderidas e observamos que as nossas cepas formavam biofilmes moderados. Contudo, a formação de biofilme dependia da capacidade da bactéria induzir o sistema SOS, tanto em aerobiose como em anaerobiose. A tensão do oxigênio foi importante para interação dos mutantes BER, uma vez que os mutantes BW9091 e BW535 apresentaram uma quantidade de bactérias aderidas menor em anaerobiose. Contudo, a diminuição observada não estava vinculada a morte dos mutantes BER. Também realizamos microscopia de varredura na cepa selvagem e nos mutantes, BW9091 e BW535 e confirmamos que as três cepas formavam biofilmes tanto em aerobiose como em anaerobiose. Observamos uma estrutura sugestiva de matriz extracelular envolvendo os biofilmes da cepa selvagem AB1157 e do mutante BW9091. No entanto, a formação desta estrutura por ambas as cepas dependia da tensão de oxigênio, pois nos biofilmes formados em anaerobiose essa estrutura estava ausente. Em conclusão, mostramos que na interação das bactérias com a superfície biótica e abiótica, ocorreu lesão no genoma, com indução do SOS e a resposta de filamentação associada.

Entre corpos abjetos e zonas de monstruosidade: traçados e passeios pela legislação

O presente trabalho consiste na análise crítica de normatizações e legislações referentes a sujeitos transexuais e travestis, no território brasileiro, contabilizando sessenta e um documentos, compreendidos entre 1997 e março de 2014. Ademais de podermos pensar o dispositivo da transexualidade que aparece como uma tentativa de docilizar corpos não-binários, domesticar sexualidades através da sua nomeação e reconhecimento social, reconhecimento este construído por um diagnóstico de transtorno de identidade de gênero. Que além de patologizar e psiquiatrizar vivências não normativas, destitui o sujeito trans* da autonomia sobre seu corpo, deslegitima sua identidade e o violenta de várias formas, até fixá-lo em padrões merecedores de políticas e direitos. A análise dos documentos apontou como conteúdo dois elementos centrais: uso do nome social e normas técnicas de patologização. Os discursos variam e ao mesmo tempo se assemelham, mostrando incongruências internas e reproduções errôneas (mas podemos falar em originalidade? E serão erros mesmo?). Dessa forma, criam-se alguns Frankensteins que podem ser potências, podem produzir anulações ou zonas de monstruosidade. Seja como abjeto, monstros ou ciborgues, as identidades trans* tencionam constantemente fronteiras e dialogam com o anômalo e as subjetividades nômades ao mesmo tempo em que oscilam entre discursos e figurações normatizadoras

Rolling of thin strip and foil: Application of a tribological model for "mixed" lubrication

A mechanical model of cold rolling of foil is coupled with a sophisticated tribological model. The tribological model treats the "mixed" lubrication regime of practical interest, in which there is "real" contact between the roll and strip as well as pressurized oil between the surfaces. The variation of oil film thickness and contact ratio in the bite is found by considering flattening of asperities on the foil and the build-up of hydrodynamic pressure through the bite. The boundary friction coefficient for the contact areas is taken from strip drawing tests under similar tribological conditions. Theoretical results confirm that roll load and forward slip decrease with increasing rolling speed due to the decrease in contact ratio and friction. The predictions of the model are verified using mill trials under industrial conditions. For both thin strip and foil, the load predicted by the model has reasonable agreement with the measurements. For rolling of foil, forward slip is overestimated. This is greatly improved if a variation of friction through the bite is considered.

Molecular phylogeography and population structure of a mid-elevation montane frog Leptobrachium ailaonicum in a fragmented habitat of southwest China

Leptobrachium ailaonicum is a vulnerable anuran restricted to a patchy distribution associated with small mountain streams surrounded by forested slopes at mid-elevations (approximately 2000-2600 m) in the subtropical Mount Wuliang and Mount Ailao ranges in southwest China (Yunnan Province) and northern Vietnam. Given high habitat specificity and lack of suitable habitat in lower elevations between these ranges, we hypothesized limited gene flow between populations throughout its range. We used two mitochondrial genes to construct a phylogeographic pattern within this species in order to test our hypothesis. We also examined whether this phylogeographic pattern is a response to past geological events and/or climatic oscillations. A total of 1989 base pairs were obtained from 81 individuals of nine populations yielding 51 unique haplotypes. Both Bayesian and maximum parsimony phylogenetic analyses revealed four deeply divergent and reciprocally monophyletic mtDNA lineages that approximately correspond to four geographical regions separated by deep river valleys. These results suggest a long history of allopatric separation by vicariance. The distinct geographic distributions of four major clades and the estimated divergence time suggest spatial and temporal separations that coincide with climatic and paleogeographic changes following the orogeny and uplift of Mount Ailao during the late Miocene to mid Pliocene in southwest China. At the southern distribution, the presence of two sympatric yet differentiated clades in two areas are interpreted as a result of secondary contact between previously allopatric populations during cooler Pleistocene glacial cycles. Analysis of molecular variance indicates that most of the observed genetic variation occurs among the four regions implying long-term interruption of maternal gene flow, suggesting that L ailaonicum may represent more than one distinct species and should at least be separated into four management units corresponding to these four geographic lineages for conservation. (C) 2009 Elsevier Inc. All rights reserved.

Study on the reproductive biology of Pinctada fucata (Gould) (Mollusca: Pteriidae)

Annual cycle of gonad development and spawning in pearl oyster, Pinctada ficata (Gould) in Nakhiloo, Northeast Persian Gulf, was investigated over two years from August 1994 to June 1996. Gonadal condition was assessed by staging criteria to describe gametogenic development from histological preparations of randomly collected individuals of all sizes. A bimodal gametogenic pattern with summer and autumn spawning periods was evident throughout the study. Gametogensis commenced in November-December which proceeded by major gonadal maturation during February-April. Summer spawning was observed from April to July with major spawning at the latter end. During spawning peak in July, low level of gametogensis was noticed. Gametogenic activity was picked up again in August-September which proceeded by autumn spawning from September to December. Towards the end of spawning season, incidence of gonadal inactivation increased. Minimum level of gonadal activity was observed in November. Temperature regime appears to have influential role in regulation of gametogenic and spawning processes. Gonadal development and spawning trends were similar in both sexes. P. radiaata was found to be protandrous hermaphrodite which matured as a male at shell height greater than 20 mm. Biseivality was uncommon and the sex ratio was about 1:1. Ultrastructure of gametes were investigated in the Pictada fucata (Gould). "Auxiliary cells" closely accociated with developing oocytes were observed. Each oocyte seems to be associated with only one secretory cell. which is characterized by an abundant rough endoplasmic reticulum at the onset of vitellogenesis. Contact between this cell and a developing oocytes is maintained by a desmosome-like junction which can be observed when the vitelline coat is formed. these "auxiliary or nursing cells" seem to play a tropic role in vitellogenesis, and may be involved in the formation of the vitelline coat of the oocytes. Oocytic degeneration is observed in this species, it is a continuous phenomenon of varing intensity throughout the year. The ultrastructural changes resulting in lysis of the oocyte are described. Mature spermatozoa consist of a broad, cap-shaped acrosomal vesicle, subacrosomal material, a round nucleus, two triplet substructure centrioles surrounded by four spherical mitochondria, and a flagellum anchored to the distal centriole and plasma membrane. Spermatozoa of Plucata closley resemble to those of other investigated Pteriidae. Changes in proximate composition of soft tissue and gonadal cycle of Pinctada fucata was studied. Mobilization and utilization of stored reserves are apparent during gametogenesis and gonadal maturation. Protein reserves are utilized during spermatogenesis while reserved carbohydrates form the main energy donor in oogenesis. The role of lipid as am.: energy reserve is second to that of carbohydrate.

Techniques to improve the shear strength of impacted bone graft: the effect of particle size and washing of the graft.

BACKGROUND: When fresh morselized graft is compacted, as in impaction bone-grafting for revision hip surgery, fat and marrow fluid is either exuded or trapped in the voids between particles. We hypothesized that the presence of incompressible fluid damps and resists compressive forces during impaction and prevents the graft particles from moving into a closer formation, thus reducing the graft strength. In addition, viscous fluid such as fat may act as an interparticle lubricant, thus reducing the interlocking of the particles. METHODS: We performed mechanical shear testing in the laboratory with use of fresh-frozen human femoral-head allografts that had been passed through different orthopaedic bone mills to produce graft of differing particle-size distributions (grading). RESULTS: After compaction of fresh graft, fat and marrow fluid continued to escape on application of normal loads. Washed graft, however, had little lubricating fluid and better contact between the particles, increasing the shear resistance. On mechanical testing, washed graft was significantly (p < 0.001) more resistant to shearing forces than fresh graft was. This feature was consistent for different bone mills that produced graft of different particle-size distributions and shear strengths. CONCLUSIONS: Removal of fat and marrow fluid from milled human allograft by washing the graft allows the production of stronger compacted graft that is more resistant to shear, which is the usual mode of failure. Further research into the optimum grading of particle sizes from bone mills is required.

Techniques to improve the shear strength of impacted bone graft: The effect of particle size and washing of the graft

Background: When fresh morselized graft is compacted, as in impaction bone-grafting for revision hip surgery, fat and marrow fluid is either exuded or trapped in the voids between particles. We hypothesized that the presence of incompressible fluid damps and resists compressive forces during impaction and prevents the graft particles from moving into a closer formation, thus reducing the graft strength. In addition, viscous fluid such as fat may act as an interparticle lubricant, thus reducing the interlocking of the particles. Methods: We performed mechanical shear testing in the laboratory with use of fresh-frozen human femoral-head allografts that had been passed through different orthopaedic bone mills to produce graft of differing particle-size distributions (grading). Results: After compaction of fresh graft, fat and marrow fluid continued to escape on application of normal loads. Washed graft, however, had little lubricating fluid and better contact between the particles, increasing the shear resistance. On mechanical testing, washed graft was significantly (p < 0.001) more resistant to shearing forces than fresh graft was. This feature was consistent for different bone mills that produced graft of different particle-size distributions and shear strengths. Conclusions: Removal of fat and marrow fluid from milled human allograft by washing the graft allows the production of stronger compacted graft that is more resistant to shear, which is the usual mode of failure. Further research into the optimum grading of particle sizes from bone mills is required. Clinical Relevance: Understanding the mechanical properties of milled human allograft is important when impaction grafting is used for mechanical support. A simple means of improving the mechanical strength of graft produced by currently available bone mills, including an intraoperative washing technique, is described.

Electrotactile touch surface by using transparent graphene

In this work we present a flexible Electrostatic Tactile (ET) surface/display realized by using new emerging material graphene. The graphene is transparent conductor which successfully replaces previous solution based on indium-thin oxide (ITO) and delivers more reliable solution for flexible and bendable displays. The electrostatic tactile surface is capable of delivering programmable, location specific tactile textures. The ET device has an area of 25 cm 2, and consists of 130 μm thin optically transparent (>76%) and mechanically flexible structure overlaid unobtrusively on top of a display. The ET system exploits electro vibration phenomena to enable on-demand control of the frictional force between the user's fingertip and the device surface. The ET device is integrated through a controller on a mobile display platform to generate fully programmable range of stimulating signals. The ET haptic feedback is formed in accordance with the visual information displayed underneath, with the magnitude and pattern of the frictional force correlated with both the images and the coordinates of the actual touch in real time forming virtual textures on the display surface (haptic virtual silhouette). To quantify rate of change in friction force we performed a dynamic friction coefficient measurement with a system involving an artificial finger mimicking the actual touch. During operation, the dynamic friction between the ET surface and an artificial finger stimulation increases by 26% when the load is 0.8 N and by 24% when the load is 1 N. © 2012 ACM.

Spintronics with graphene

Because of its fascinating electronic properties, graphene is expected to produce breakthroughs in many areas of nanoelectronics. For spintronics, its key advantage is the expected long spin lifetime, combined with its large electron velocity. In this article, we review recent theoretical and experimental results showing that graphene could be the long-awaited platform for spintronics. A critical parameter for both characterization and devices is the resistance of the contact between the electrodes and the graphene, which must be large enough to prevent quenching of the induced spin polarization but small enough to allow for the detection of this polarization. Spin diffusion lengths in the 100-μm range, much longer than those in conventional metals and semiconductors, have been observed. This could be a unique advantage for several concepts of spintronic devices, particularly for the implementation of complex architectures or logic circuits in which information is coded by pure spin currents. © Copyright 2012 Materials Research Society.

Manufacturing dish shaped rings on radial-axial ring rolling mills

Ring rolling is an established method to produce seamless rings of different cross-sectional geometries. For dish shaped rings, there are applications in different areas such as offshore, aeronautics or the energy sector. At the moment, dish shaped rings are produced by machining of rings with rectangular shaped cross section, by (open die) hollow forging on a conical mandrel or by using shaped ring rolling tools. These ways of manufacturing have the disadvantage of high material waste, additional costs for special tools, long process time and limited or inflexible geometries. Therefore, the manufacturing of dish shaped rings on conventional radial-axial ring rolling mills would expand the range of products for ring producers. The aim of this study is to investigate the feasibility of an alternative to the current manufacturing processes, without requiring additional tooling and material costs. Therefore, the intended formation of dish shaped rings-previously regarded as a form error-is investigated. Based on an analysis of geometrical requirements and metal flow mechanisms, a rolling strategy is presented, causing dishing and ring climbing by a large height reduction of the ring. Using this rolling strategy dish shaped rings with dishing angles up to 18° were achieved. In addition to the experiments finite element method (FEM)-simulations of the process have been successfully conducted, in order to analyze the local strain evolution. However, when the contact between ring and main roll is lost in the process the ring starts to oscillate around the mandrel and neither dishing nor ring climbing is observed. © 2013 German Academic Society for Production Engineering (WGP).

Fabrication and integration of horizontally aligned carbon nanotube C60 films for UV sensors

Carbon nanotubes (CNTs) are promising for microsystems applications, yet few techniques effectively enable integration of CNTs with precise control of placement and alignment of the CNTs at sufficiently high densities necessary for compelling mechanical or electrical performance. This paper explores new methods for scalable integration of dense, horizontally aligned (HA) CNTs with patterned electrodes. Our technique involves the synthesis of vertically aligned (VA) CNTs directly on a conductive underlayer and subsequent mechanical transformation into HA-CNTs, thus making electrical contact between two electrodes. We compare elasto-capillary folding and mechanical rolling as methods for transforming VA-CNTs, which lead to distinctly different HA-CNT morphologies and potentially impact material and device properties. As an example application of this novel CNT morphology, we investigate fabrication of electrically addressable CNT-C60 hybrid thin films that we previously demonstrated as photodetectors. We synthesize these assemblies by crystallizing C60 from dispersion on HA-CNT thin-film scaffoldings. HA-CNTs fabricated by rolling result in relatively low packing density, so C 60 crystals embed inside the HA-CNT matrix during synthesis. On the other hand, C60 crystallization is restricted to near the surface of HA-CNT films made by the elasto-capillary process. © 2013 IEEE.

Lysis of Aphanizomenon flos-aquae (Cyanobacterium) by a bacterium Bacillus cereus

A phytoplankton-lytic (PL) bacterium, Bacillus cereus, capable of lysing the bloom-forming cyanobacterium. Aphanizomenon flos-aquae was isolated from Lake Dianchi of Yunnan province, China. This bacterium showed lytic activities against a wide range of cyanobacteria/algae, including A. flos-aquae, Microcystis viridis, Microcystis wesenbergi, Microcystis aeruginosa, Chlorella ellipsoidea, Oscillatoria tenuis, Nostoc punctiforme, Anabaena flos-aquae, Spirulina maxima, and Selenastrum capricornutum. Chlorophyll a contents, phycocyanin contents, and photosynthetic activities of the A. flos-aquae decreased evidently in an infected culture for a period. Bacterium B. cereus attacked rapidly A. flos-aquae cells by cell-to-cell contact mechanism. It was shown that the lysis of A. flos-aquae began with the breach of the cyanobacterial cell wall, and the cyanobacterial cell appeared abnormal in the presence of the PL bacterium. Moreover, transmission electron microscope examinations revealed that a close contact between the bacterium and the cyanobacterium was necessary for lysis. Some slime extrusions produced from B. cereus assisted the bacterial cells to be in close association with and lyse the cyanobacterial cells. These findings suggested that this bacterium could play an important role in controlling the Aphanizomenon blooms in freshwaters. (c) 2006 Elsevier Inc. All rights reserved.

Synthesis of polycrystalline nanotubular Bi2Te3

Polycrystalline nanotubular Bi2Te3 could be prepared via a high-temperature solution process using nanoscale tellurium, decomposed from trioctylphosphine oxide (TOPO) extracted tellurium species (Te-TOPO), as sacrificial template. The formation of such tubular structure is believed to be the result of outward diffusion of Te during the alloying process. The electrical properties (Seebeck coefficient and electrical conductivity) of the polycrystalline nanotubular Bi2Te3 have been studied and the experimental results show that the electrical conductivity is approximately three orders of magnitude smaller than bulk bismuth telluride materials mainly due to the much larger resistance brought by the insufficient contact between the nanotubular structures.