An alternative process for butanol production: Continuous flash fermentation

The objective of this work is to introduce and demonstrate the technical feasibility of the continuous flash fermentation for the production of butanol. The evaluation was carried out through mathematical modeling and computer simulation which is a good approach in such a process development stage. The process consists of three interconnected units, as follows: the fermentor, the cell retention system (tangential microfiltration) and the vacuum flash vessel (responsible for the continuous recovery of butanol from the broth). The efficiency of this process was experimentally validated for the ethanol fermentation, whose main results are also shown. With the proposed design the concentration of butanol in the fermentor was lowered from 11.3 to 7.8 g/l, which represented a significant reduction in the inhibitory effect. As a result, the final concentration of butanol was 28.2 g/l for a broth with 140 g/l of glucose. Solvents productivity and yield were, respectively, 11.7 g/l.h and 33.5 % for a sugar conversion of 95.6 %. Positive aspects about the flash fermentation process are the solvents productivity, the use of concentrated sugar solution and the final butanol concentration. The last two features can be responsible for a meaningful reduction in the distillation costs and result in environmental benefits due to lower quantities of wastewater generated by the process. © 2008 Berkeley Electronic Press. All rights reserved.

Dynamics of a continuous flash fermentation for butanol production

The ABE (acetone, butanol, ethanol) fermentation is characterized by its low productivity. In this paper, this issue is overcome with an innovative industrial process that employs the flash fermentation technology. The process consists of three interconnected units, as follows: fermentor, cell retention system (tangential microfiltration) and vacuum flash vessel (responsible for the continuous recovery of butanol from the broth). The dynamic behaviour of the process is described by a nonlinear mathematical model with kinetic parameters determined experimentally. From simulations of the mathematical model the dynamic characteristics of the process were investigated. Analyzes of the open-loop dynamic behavior of the process, after step perturbations in the manipulated variables, determined the best control structures for the process. Copyright © 2010, AIDIC Servizi S.r.l.

The impact of fuse link manufacturers on arc flash energy

The traditional operational and hazard control paradigm of an electrical installation has several issues pertaining to the diversity of equipment. A large maintenance inventory is a reason for concern for any manager, but the arc flash hazard is a particularly new phenomenon and the effects of equipment diversity on this phenomenon are even newer. The class of arc hazard can be increased, simply by changing the fuse link or circuit breaker manufacturer. Management pressure to operate as well as non-standard practices and installations are also partly responsible. The aim of this study is to take a typical situation in an industrial plant and to statistically simulate, by means of a dedicated software program, the fuse arc flash interruption performance of various manufacturers. The purpose of this study is to obtain a more objective indication of the influence of different fuse link manufacturers on arc flash incident energy. © 2011 IEEE.

Arc-flash energy: The impact of fuse link manufacturers

The traditional operational and hazard control paradigm of an electrical installation has several issues pertaining to the diversity of equipment. A large maintenance inventory is a reason for concern for any manager, but the arc-flash hazard is a particularly new phenomenon, and the effects of equipment diversity on this phenomenon are even newer. The class of arc hazard can be simply increased by changing the fuse link or circuit breaker manufacturer. Management pressure to operate as well as nonstandard practices and installations are also partly responsible. The aim of this article is to take a typical situation in an industrial plant and to statistically simulate, by means of a dedicated software program, the fuse arc-flash interruption performance of various manufacturers. The purpose of this article is to obtain a more objective indication of the influence of different fuse link manufacturers on arc-flash incident energy. © 1975-2012 IEEE.

Progressive recovery of a tropical deforested stream community after a flash flood

AIM: In this study, we evaluated and compared community attributes from a tropical deforested stream, located in a pasture area, in a period before (PRED I) and three times after (POSD I, II, and III) a flash flood, in order to investigate the existence of temporal modifications in community structure that suggests return to conditions previous to the flash flood. METHODS: Biota samples included algae, macrophytes, macroinvertebrates, and fish assemblages. Changes in stream physical structure we also evaluated. Similarity of the aquatic biota between pre and post-disturbance periods was examined by exploratory ordination, known as Non-Metric Multidimensional Scaling associated with Cluster Analysis, using quantitative and presence/absence Bray-Curtis similarity coefficients. Presence and absence data were used for multivariate correlation analysis (Relate Analysis) in order to investigate taxonomic composition similarity of biota between pre and post-disturbance periods. RESULTS: Our results evidenced channel simplification and an expressive decrease in richness and abundance of all taxa right after the flood, followed by subsequent increases of these parameters in the next three samples, indicating trends towards stream community recovery. Bray-Curtis similarity coefficients evidenced a greater community structure disparity among the period right after the flood and the subsequent ones. Multivariate correlation analysis evidenced a greater correlation between macroinvertebrates and algae/macrophytes, demonstrating the narrow relation between their recolonization dynamics. CONCLUSIONS: Despite overall community structure tended to return to previous conditions, recolonization after the flood was much slower than that reported in literature. Finally, the remarkably high flood impact along with the slow recolonization could be a result of the historical presence of anthropic impacts in the region, such as siltation, riparian forest complete depletion, and habitat simplification, which magnified the effects of a natural disturbance.

Laser-flash photolysis of alpha-brominated o-xylenes

The flash photolysis (lambda = 266 nm) of four alpha -brominated omicron -xylenes in apolar solvents gives two transients characterized, depending on parent compound substitution, as either monoradicals or carbenes, and quinodimethanes. alpha -Bromomethylbenzyl radical is characterized and the novel species alpha,alpha'-dibromo-omicron -xylylene and omicron-(alpha,alpha -dibromomethyl)benzyl carbene are described for the first time. (C) 2001 Elsevier Science B.V. All rights reserved.

Potencial evocado visual por flash em cães, ovinos e equinos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Flash Mob: da rede à praça

This work explores the flash mobs, which are flash mobilizations arranged by intent that involve a large number of people to do something together in a pre-arranged place. With the advent of 2.0 Internet, the sharing of information and the mobile virtual communication grown up and showed behavior of an individual person to meet for a common interest. Those affective relationships born in the social networks come to the urban space in a real-virtual space junction and the possibilities of that are unexplored yet. Studied by this work, the Y generation is the flash mob most popular public and uses those mobilizations to reinforce their fan identity and appreciation for a media product

Optical parameters and crystallization of flash evaporated amorphous gallium antimonide films

Flash-evaporated GaSb films are analysed using a combination of optical, surface and x-ray diffraction techniques. The effects of thermal annealings on nearly stoichiometric GaSb films are studied.

Screen-Sized PDFs in Sans Serif Type: Template and Files

This document style is intended for reading onscreen. It creates a two-page spread that fits on a single screen (of 1024 x 768 pixels), with type that remains readable at 75% magnification. It includes design and typographic settings to accommodate common text elements: headings, subtitles, extracts, etc. The font is Lucida Sans Unicode, set single-spaced. It is a sans serif font, which allows for greater readability at smaller sizes and onscreen. The basic text size is 11 point. The font is engi¬neered with a tall line-height, so that even set “solid” (i.e., single-spaced) there is ample “leading” between the lines for clear reading. The overall design is “left aligned”—that is all titles, subtitles, headings, etc. are lined up on the left margin. Paragraphs are justified, for easier reading; titles, headings, references, captions, and endnotes are not justified. The two files attached to this documents are: Screen SansSerif file.doc = a blank MS Word file with these page and type specifications already loaded. Enter (or paste) your text into this file and Save under a new name. Screen SansSerif template.dot = an MS Word template; use this to create a new blank document. Templates are generally stored in a folder in Program Files > Microsoft Office > Templates The main document contains sample pages and specifications for the type, margins, settings, etc.

A Simple Method to Evaluate, Correlate and Predict Boiling and Flash Points of Alkynes

Boiling points (T-B) of acyclic alkynes are predicted from their boiling point numbers (Y-BP) with the relationship T-B(K) = -16.802Y(BP)(2/3) + 337.377Y(BP)(1/3) - 437.883. In turn, Y-BP values are calculated from structure using the equation Y-BP = 1.726 + A(i) + 2.779C + 1.716M(3) + 1.564M + 4.204E(3) + 3.905E + 5.007P - 0.329D + 0.241G + 0.479V + 0.967T + 0.574S. Here A(i) depends on the substitution pattern of the alkyne and the remainder of the equation is the same as that reported earlier for alkanes. For a data set consisting of 76 acyclic alkynes, the correlation of predicted and literature T-B values had an average absolute deviation of 1.46 K, and the R-2 of the correlation was 0.999. In addition, the calculated Y-BP values can be used to predict the flash points of alkynes.

Resistance to Flexural Fatigue of Reciproc R25 Files under Continuous Rotation and Reciprocating Movement

Introduction: The aim of the present work was to evaluate the resistance to flexural fatigue of Reciproc R25 nickel-titanium files, 25 mm, used in continuous rotation motion or reciprocation motion, in dynamic assays device. Methods: Thirty-six Reciproc R25 files were divided into 2 groups (n = 18) according to kinematics applied, continuous rotary (group CR) and reciprocation motion (group RM). The files were submitted to dynamic assays device moved by an electric engine with 300 rpm of speed that permitted the reproduction of pecking motion. The files run on a ring's groove of temperate steel, simulating instrumentation of a curved root canal with 400 and 5 mm of curvature radius. The fracture of file was detected by sensor of device, and the time was marked. The data were analyzed statistically by Student's t test, with level of significance of 95%. Results: The instruments moved by reciprocating movement reached significantly higher numbers of cycles before fracture (mean, 1787.78 cycles) when compared with instruments moved by continuous rotary (mean, 816.39 cycles). Conclusions: The results showed that the reciprocation motion improves flexural fatigue resistance in nickel-titanium instrument Reciproc R25 when compared with continuous rotation movement. (J Endod 2012;38:684-687)

Densification and enhancement of the grain boundary conductivity of gadolinium-doped barium cerate by ultra fast flash grain welding

Doped barium cerate is a promising solid electrolyte for intermediate temperature fuel cells as a protonic conductor. However, it is difficult to sinter it to high density at a reasonable temperature. Moreover, it presents a high grain boundary resistivity at intermediate temperatures. Flash grain welding was applied to compacted samples, starting from a temperature of 910 degrees C and applying, for a short time, an ac electric polarization of 40 V, 1000 Hz. At that frequency, the resulting current flows through the grain boundaries promoting a welding via a local Joule heating. A large decrease of the grain boundary resistivity was observed by impedance spectroscopy. Scanning electron microscopy observations of polished and etched surfaces revealed highly sintered regions. Attempts were also made to combine flash grain welding with conventional sintering. (C) 2012 Elsevier Ltd. All rights reserved.

A simple method to evaluate, correlate and predict boiling and flash points of alkynes

Boiling points (T B) of acyclic alkynes are predicted from their boiling point numbers (Y BP) with the relationship T B(K) = -16.802Y BP2/3 + 337.377Y BP1/3 - 437.883. In turn, Y BP values are calculated from structure using the equation Y BP = 1.726 + Ai + 2.779C + 1.716M3 + 1.564M + 4.204E3 + 3.905E + 5.007P - 0.329D + 0.241G + 0.479V + 0.967T + 0.574S. Here Ai depends on the substitution pattern of the alkyne and the remainder of the equation is the same as that reported earlier for alkanes. For a data set consisting of 76 acyclic alkynes, the correlation of predicted and literature T B values had an average absolute deviation of 1.46 K, and the R² of the correlation was 0.999. In addition, the calculated Y BP values can be used to predict the flash points of alkynes.