Estudo da dinâmica e destino ambiental dos fluidos usados na usinagem industrial de peças metálicas

Este estudo consistiu na investigação sobre a interação dos lubrificantes empregados na usinagem de metais com a matéria orgânica natural (substâncias húmicas), a sua mobilidade no solo, a degradação microbiológica e a remoção dos mesmos do solo. Realizou-se, também, um estudo sobre as mudanças nas características dos fluidos após a sua utilização. Para o processo de degradação das amostras de fluido, submetidos aos efeitos de diferentes fatores ambientais, foram utilizados quatro tratamentos : (i) microrganismos nativos, chamada amostra controle; (ii) amostra controle com matéria orgânica proveniente de turfa; (iii) amostra controle acrescida de microrganismos existentes nos efluentes de máquinas de corte; e (iv) amostra controle com adição de microrganismos de compostagem. Para a pesquisa da degradação sem o efeito dos parâmetros climáticos, foram utilizadas amostras de solo contaminadas mantendo-se em estufa, e a inoculação dos microrganismos em meios de cultura com e sem acréscimo de fonte alternativa de carbono. Como técnicas analíticas, foram utilizadas a CG-DIC e a CG-EM. Essas técnicas são indicadas tanto para estudar a composição dos fluidos quanto dos produtos de degradação microbiológica, tendo sido otimizados métodos analíticos para serem empregados no monitoramento ambiental e de estudos de degradação. As análises por IVTF e por EF também foram empregadas na identificação e quantificação dos fluidos. Observou-se uma considerável interação dos fluidos solúveis com a matéria orgânica do solo, embora tenham se apresentado com alta mobilidade para alguns constituintes, bem como um acelerado processo de degradação durante o uso. De outro modo, os fluidos insolúveis se apresentaram mais imóveis, ficando retidos na matéria orgânica do solo, entretanto, foram mais prontamente degradados no ambiente que os solúveis. A adição de matéria orgânica e de microrganismos de compostagem acelerou o processo de degradação para todos os fluidos de corte investigados.

Plan de restauración y conservación del humedal urbano de Calpe, Alicante (SE España)

Este estudio pretende profundizar en el conocimiento sobre el funcionamiento de pequeños humedales mediterráneos, en estado de degradación, que, por razones históricas y socioeconómicas, han quedado confinados en un espacio urbano, olvidando la importancia ambiental de estas anomalías hídricas positivas en espacios sometidos a déficit hídrico. Este tipo de humedales, como el de Calpe (Alicante), suelen localizarse en áreas costeras de alta densidad urbana, lo que supone un importante valor añadido desde la ordenación y gestión territorial, ya que contribuyen a mantener la conectividad ambiental a una escala mucho más amplia, funcionando como auténticos reservorios de biodiversidad. Así, se ha llevado a cabo una aproximación holística, analizando el estado actual de la lámina de agua y del espacio circundante, donde se han incluido parámetros del medio físico, del medio biótico y los usos del suelo. Para ello se han combinado técnicas de muestreo de campo con el uso de GPS y sistemas de información geográfica (SIG). Una vez detectadas las amenazas, y estudiado el potencial ecológico del humedal, se ha desarrollado un plan de restauración y conservación de la zona con la pretensión de implicar a la población local para devolver a este espacio el protagonismo que merece. En definitiva, se pretende proporcionar las herramientas teóricas y técnicas necesarias para garantizar la conservación y gestión sostenible de los humedales costeros urbanos y sus recursos naturales.

Mass fluxes and organic carbon fluxes at four stations off Cape Blanc, NW Africa (Mauritania)

Vertical carbon fluxes between the surface and 2500 m depth were estimated from in situ profiles of particle size distributions and abundances me/asured off Cape Blanc (Mauritania) related to deep ocean sediment traps. Vertical mass fluxes off Cape Blanc were significantly higher than recent global estimates in the open ocean. The aggregates off Cape Blanc contained high amounts of ballast material due to the presence of coccoliths and fine-grained dust from the Sahara desert, leading to a dominance of small and fast-settling aggregates. The largest changes in vertical fluxes were observed in the surface waters (<250 m), and, thus, showing this site to be the most important zone for aggregate formation and degradation. The degradation length scale (L), i.e. the fractional degradation of aggregates per meter settled, was estimated from vertical fluxes derived from the particle size distribution through the water column. This was compared with fractional remineralization rate of aggregates per meter settled derived from direct ship-board measurements of sinking velocity and small-scale O2 fluxes to aggregates measured by micro-sensors. Microbial respiration by attached bacteria alone could not explain the degradation of organic matter in the upper ocean. Instead, flux feeding from zooplankton organisms was indicated as the dominant degradation process of aggregated carbon in the surface ocean. Below the surface ocean, microbes became more important for the degradation as zooplankton was rare at these depths.

Cellular responses to potential biomaterials

The aim of this study was to systematically investigate the factors considered to be responsible for anchorage-dependent cell behaviour to determine which, if any, of these factors exerts greater influence. An efficient means of doing so is the in vitro fibroblast cell culture model. The interaction of fibroblasts with novel substrata gives information about how a biological system reacts to a foreign material. The may ultimately lead to the development of improved biomaterials. This interdisciplinary study combines the elements of surface characterisation and biological testing to determine the nature of the biomaterial/host interface. Polarity and surface charge were found to have an important influence on fibroblast adhesion to hydrogel polymers, by virtue of their water-structuring effects. The same factors were found to affect cell adhesion on undegraded PHB-HV copolymers and their blends with polysaccharides. On degraded PHB-HV copolymers, the degradation process itself played the greatest role in influencing cell response. Increasing surface charge and mechanical instability in these polymers inhibited cell adhesion. Based on the observations of hydrogels and PHB-copolymers a novel material, gel-spun PHB was designed for use as a wound scaffold. In vitro tests using human and mammalian fibroblasts accentuated the importance of polarity and surface charge in determining cellular response. The overall view of cellular behaviour on a broad spectrum of materials highlighted the effects that polarity and surface charge have on water-structuring, and how this affects interfacial conversion. In degradable systems, mechanical stability also plays an inportant role in determining anchorage-dependent cell behaviour.

Melt processable biomaterials for degradable surgical fixation devices

There are currently few biomaterials which combine controlled degradation rates with ease of melt processability. There are however, many applications ranging from surgical fixation devices to drug delivery systems which require such combination properties. The work in this thesis is an attempt to increase the availability of such materials. Polyhydroxybutyrate-polyhydroxyvalerate copolymers are a new class of potentially biodegradable materials, although little quantitative data relating to their in vitro and in vivo degradation behaviour exists. The hydrolytic degradation of these copolymers has been examined in vitro under conditions ranging from `physiological' to extremes of pH and elevated temperature. Progress of the degradation process was monitored by weight loss and water uptake measurement, x-ray diffractometry, optical and electron microscopy, together with changes in molecular weight by gel permeation chromatography. The extent to which the degradation mechanism could be modified by forming blends with polysaccharides and polycaprolactone was also investigated. Influence of the valerate content, molecular weight, crystallinity, together with the physical form of the sample, the pH and the temperature of the aqueous medium on the hydrolytic degradation was investigated. Its progress was characterised by an initial increase in the wet weight, with concurrent decrease in the dry weight as the amorphous regions of the polymer are eroded, thereby producing an increase in matrix porosity. With the polysaccharide blends, this initial rate is dramatically affected, and erosion of the polysaccharide from the matrix markedly increases the internal porosity which leads to the eventual collapse of the matrix, a process which occurs, but less rapidly, in the degradation of the unblended polyhydroxybutyrate-polyhydroxyvalerate copolymers. Surface energy measurement and goniophotometry proved potentially useful in monitoring the early stages of the degradation, where surface rather than bulk processes predominate and are characterised by little weight loss.

Seawater carbonate chemistry and community calcification during Reunion Island coral reef community study, 2007

To assess the contribution of soft-bottoms to the carbon cycle in coral reefs, the net community production (p) was measured in winter at 3 stations on La Saline inner reef flat (Reunion Island). Changes in pH and total alkalinity at different irradiances (I) were assessed using benthic chambers (0.2 m2) during a 1-h incubation. Mean grain size, the silt and clay load and chlorophyll a content of the sediments were analysed in each chamber. Daily community production (P), gross community production (Pg) and community respiration (R) were estimated from p-I curves and daily irradiance variations (PAR, 400-700 nm). Sediment characteristics and chlorophyll a contents did not differ between the three sites, except for the silt and clay fraction at one station. R being higher than Pg (84.88 ± 7.36 and -62.29 ± 3.34 mmolC m-2 d-1 respectively), P value reached 22.59 ± 5.66 mmolC m-2 d-1. The sediments were therefore heterotrophic with a mean Pg/R lower than 1 (0.74 ± 0.05) and appear to be a carbon source. Our data suggested the importance of the degradation process in the functioning of near-reef sediments.

Ultrasound-assisted electrochemical treatment of wastewaters containing organic pollutants by using novel Ti/Ta2O5-SnO2 electrodes

Advanced oxidation processes (AOPs) are modern methods using reactive hydroxyl radicals for the mineralization of organic pollutants into simple inorganic compounds, such as CO2 and H2O. Among AOPs electrochemical oxidation (EO) is a method suitable for coloured and turbid wastewaters. The degradation of pollutants occurs on electrocatalytic electrodes. The majority of electrodes contain in their structure either expensive materials (diamond and Pt-group metals) or are toxic for the environment compounds (Sb or Pb). One of the main disadvantages of electrochemical method is the polarization and contamination of electrodes due to the deposition of reaction products on their surface, which results in diminishing of the process efficiency. Ultrasound combined with the electrochemical degradation process eliminates electrode contamination because of the continuous mechanical cleaning effect produced by the formation and collapse of acoustic cavitation bubbles near to the electrode surface. Moreover, high frequency ultrasound generates hydroxyl radicals at water sonolysis. Ultrasound-assisted EO is a non-selective method for oxidation of different organic compounds with high degradation efficiencies. The aim of this research was to develop novel sustainable and cost-effective electrodes working as electrocatalysts and test their activity in electrocatalytic oxidation of organic compounds such as dyes and organic acids. Moreover, the goal of the research was to enhance the efficiency of electrocatalytic degradation processes by assisting it with ultrasound in order to eliminate the main drawbacks of a single electrochemical oxidation such as electrodes polarization and passivation. Novel Ti/Ta2O5-SnO2 electrodes were developed and found to be electrocatalytically active towards water (with 5% Ta content, 10 oxide film layers) and organic compounds oxidation (with 7.5% Ta content, 8 oxide film layers) and therefore these electrodes can be applicable in both environmental and energy fields. The synergetic effect of combined electrolysis and sonication was shown while conducting sonoelectrochemical (EO/US) degradation of methylene blue (MB) and formic acid (FA). Complete degradation of MB and FA was achieved after 45 and 120 min of EO/US process respectively in neutral media. Mineralization efficiency of FA over 95% was obtained after 2 h of degradation using high frequency ultrasound (381, 863, 1176 kHz) combined with 9.1 mA/cm2 current density. EO/US degradation of MB provided over 75% mineralization in 8 h. High degradation kinetic rates and mineralization efficiencies of model pollutants obtained in EO/US experiments provide the preconditions for further extrapolation of this treatment method to pilot scale studies with industrial wastewaters.

Improving the stability of an oxime based electrochemical microsensor for organo-phosphate vapor detection

A micro gas sensor has been developed by our group for the detection of organo-phosphate vapors using an aqueous oxime solution. The analyte diffuses from the high flow rate gas stream through a porous membrane to the low flow rate aqueous phase. It reacts with the oxime PBO (1-Phenyl-1,2,3,-butanetrione 2-oxime) to produce cyanide ions, which are then detected electrochemically from the change in solution potential. Previous work on this oxime based electrochemistry indicated that the optimal buffer pH for the aqueous solution was approximately 10. A basic environment is needed for the oxime anion to form and the detection reaction to take place. At this specific pH, the potential response of the sensor to an analyte (such as acetic anhydride) is maximized. However, sensor response slowly decreases as the aqueous oxime solution ages, by as much as 80% in first 24 hours. The decrease in sensor response is due to cyanide which is produced during the oxime degradation process, as evidenced by the cyanide selective electrode. Solid phase micro-extraction carried out on the oxime solution found several other possible degradation products, including acetic acid, N-hydroxy benzamide, benzoic acid, benzoyl cyanide, 1-Phenyl 1,3-butadione, 2-isonitrosoacetophenone and an imine derived from the oxime. It was concluded that degradation occurred through nucleophilic attack by a hydroxide or oxime anion to produce cyanide, as well as a nitrogen atom rearrangement similar to Beckmann rearrangement. The stability of the oxime in organic solvents is most likely due to the lack of water, and specifically hydroxide ions. The reaction between oxime and organo-phosphate to produce cyanide ions requires hydroxide ions, and therefore pure organic solvents are not compatible with the current micro-sensor electrochemistry. By combining a concentrated organic oxime solution with the basic aqueous buffer just prior to being used in the detection process, oxime degradation can be avoided while preserving the original electrochemical detection scheme. Based on beaker cell experiments with selective cyanide sensitive electrodes, ethanol was chosen as the best organic solvent due to its stabilizing effect on the oxime, minimal interference with the aqueous electrochemistry, and compatibility with the current microsensor material (PMMA). Further studies showed that ethanol had a small effect on micro-sensor performance by reducing the rate of cyanide production and decreasing the overall response time. To avoid incomplete mixing of the aqueous and organic solutions, they were pre-mixed externally at a 10:1 ratio, respectively. To adapt the microsensor design to allow for mixing to take place within the device, a small serpentine channel component was fabricated with the same dimensions and material as the original sensor. This allowed for seamless integration of the microsensor with the serpentine mixing channel. Mixing in the serpentine microchannel takes place via diffusion. Both detector potential response and diffusional mixing improve with increased liquid residence time, and thus decreased liquid flowrate. Micromixer performance was studies at a 10:1 aqueous buffer to organic solution flow rate ratio, for a total rate of 5.5 μL/min. It was found that the sensor response utilizing the integrated micromixer was nearly identical to the response when the solutions were premixed and fed at the same rate.

Processos Oxidativos Avançados para Remediação de Águas Contaminadas por Pesticidas

Este trabalho teve como objectivo inicial o estudo de processos oxidativos avançados de forma a remediar e tratar águas contaminadas por pesticidas. No entanto, ao longo do trabalho experimental, constatou-se que os produtos resultantes da degradação de pesticidas são muitas vezes mais tóxicos do que os compostos que lhes deram origem e que, por isso, degradar um composto nem sempre é o melhor para o ambiente. Assim, neste trabalho, procurou-se estudar o processo de degradação com o objectivo de minimizar o impacto ambiental dos pesticidas na água e no ambiente em geral. A parte experimental deste trabalho foi dividida em duas etapas, sendo que, em ambas, a voltametria de onda quadrada e a espectrofotometria de UV/Vis foram os métodos de análise utilizados, para acompanhar o processo de fotodegradação. Na primeira etapa estudou-se a relação entre a estrutura química dos pesticidas MCPA, MCPP, 2.4-D e Dicloroprop e a sua fotodegradação. Soluções aquosas dos pesticidas enunciados foram submetidas a irradiação UV/vis, com incrementos variáveis de tempo de irradiação. Os resultados obtidos, nesta etapa, permitiram constatar diferenças na percentagem de degradação dos diferentes pesticidas. Dos pesticidas estudados verificou-se uma maior fotodegradação para o MCPA e MCPP seguido do Dicloroprop e finalmente o 2.4-D que se degradou menos. Os dados obtidos sugerem que a fotodegradação destes pesticidas está intimamente ligada com a estrutura das moléculas. A presença de um maior número de grupos cloro ligados ao anel aromático nos pesticidas 2,4-D e Dicloroprop faz com que estes sejam mais estáveis e por isso se degradam menos que o MCPA e o MCPP. Por outro lado, o facto de o 2,4-D apresentar um potencial de oxidação mais elevado do que o Dicloroprop, faz com que este seja mais difícil de degradar, o que justifica a diferença entre os dois. Desta forma, foi possível concluir que a estrutura dos pesticidas condiciona o processo de degradação, como esperado. Na segunda etapa, estudou-se a estabilização dos pesticidas MCPA e MCPP após encapsulação, com 2-hidroxipropil-β-ciclodextrina (HP-β-CD), em água desionizada e em água do rio. Para tal, submeteram-se as soluções aquosas dos pesticidas com e sem ciclodextrina, a irradiação UV/vis, também com incrementos variáveis de tempo. No caso do MCPA verificou-se que, tanto para água desionizada como para água do rio, que este herbicida encapsulado se degrada bastante menos do que o MCPA livre. O encapsulamento permitiu reduzir quase para metade a taxa de fotodegradação. Assim, confirmou-se que a HP-β-CD permite estabilizar este pesticida, tornando-o mais resistente à fotodegradação. Desta forma, originam-se menos produtos de degradação, os quais podem ser mais tóxicos, e reduz-se de o impacto ambiental deste herbicida. Verificou-se também que o MCPA livre se degrada mais em água do rio do que em água desionizada, provavelmente devido à matéria orgânica presente nesta água, que promove o processo de degradação. No que respeita ao MCPP também se constatou que este herbicida se degrada menos encapsulado do que livre, em água desionizada e em água do rio. Neste caso, conseguiu-se reduzir pouco a taxa de fotodegradação, mas, ainda assim se verifica uma estabilização deste pesticida através do encapsulamento. No entanto, tornou-se mais evidente a estabilização do MCPP após encapsulação em água do rio, já que apresenta uma taxa de fotodegradação menor. Este facto demonstra que a HP-β-CD permite estabilizar também este pesticida, tornando-o mais resistente à fotodegradação, e reduzindo seu impacto ambiental.

Degradação de Ocratoxina a: estudo de processo e toxicidade

A ocratoxina A (OTA), micotoxina encontrada em diferentes níveis e em diversas matrizes, apresenta efeitos carcinogênicos, nefrotóxicos e teratogênicos. O desenvolvimento de métodos capazes de diminuir esta contaminação a níveis permitidos pela legislação é incentivado e os processos biológicos utilizados envolvem o uso de enzimas e/ou microrganismos para degradação da OTA e são preferenciais pela especificidade, bem como pelas condições brandas para a detoxificação. O objetivo do trabalho foi estudar a ação de carboxipeptidase A nos níveis e na toxicidade de OTA, visando aplicar a técnica para detoxificar farinhas de trigo. Primeiramente foi estimado o risco de exposição à ocratoxina A pelo consumo de farinhas de trigo. Para isso foram estabelecidas condições de determinação de OTA em farinhas de trigo, empregando técnicas de estatística multivariada para definir os principais interferentes na extração de OTA pelo método de QuEChERS e detecção em CLAE-FL. O método validado permitiu a avaliação da ocorrência natural em 20 amostras de farinha de trigo, estando estas contaminadas na faixa de 0,22 a 0,85 µg.kg-1 , apresentando um valor de ingestão diária de 0,08 ngOTA.dia-1 .kgmassacorpórea -1 e uma disponibilidade de 94,4%. Em seguida foi realizada a padronização da extração de carboxipeptidase A em biomassa de Rhizopus oryzae que consistiu em agitação ultrassônica durante 30 minutos numa potencia fixa de 150 W e 40 kHz e a triagem de agentes biológicos para degradação de OTA. Para o estudo da degradação in vitro de OTA, método de extração e detecção de OTA e OTα em CLAEFL foi validado e o processo de degradação foi realizado com Rhizopus oryzae e Trichoderma reesei, obtendo-se uma redução máxima de 63,5% e 57,7%, respectivamente. A degradação apresentou uma correlação alta (R>0,9) e significativa (p<0,05) com a produção de Otα, indicando que ocorreu a produção de enzimas capazes de hidrolisar a micotoxina, por exemplo, a carboxipeptidase A. O estudo da toxicidade de OTA e seu metabólito OTα foi realizado em neutrófilos humanos, onde foi observado a ausência de efeito tóxico de OTα. Também foi determinado o mecanismo de toxicidade de OTA pelo aumento de Ca2+ intracelular pela liberação a partir das reservas internas. Esta liberação, subsequentemente, provoca uma cascata de eventos, nomeadamente: a produção de espécies reativas, depleção de ATP, perda de ΔΨm, levando à morte por necrose. Para reduzir o risco de exposição à micotoxina pela ingestão de matéria prima contaminada, carboxipeptidase A extraída de diferentes fontes foi aplicada na hidrólise de OTA em farinha de trigo para posterior determinação do conteúdo residual de OTA e OTα, empregando método validado. O estudo mostrou uma redução de OTA entre 16,8 e 78,5% e produção de OTα entre 2 a 8,2 ng.g-1 . As carboxipeptidases mais promissoras para degradação foram as provenientes de Rhizopus e Trichoderma e a carboxipeptidase comercial. Ficou demonstrado que se pode recomendar a aplicação de enzimas proteolíticas, tipo carboxipeptidase, para reduzir o risco de exposição à micotoxina quando utilizada matéria prima contaminada, por exemplo, farinha de trigo para diferentes processos. A transformação de OTA para OTα e seus efeitos na redução da toxicidade da micotoxina corroboram com esta afirmação.

Evolução da degradação de fachadas : efeito dos agentes de degradação e dos elementos constituintes

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Civil e Ambiental, 2016.

Síntese, estudo cinético e análise microestrutural do sistema cério-níquel obtido pelo método pechini

The cerium oxide has a high potential for use in removing pollutants after combustion, removal of organic matter in waste water and the fuel-cell technology. The nickel oxide is an attractive material due to its excellent chemical stability and their optical properties, electrical and magnetic. In this work, CeO2-NiO- systems on molars reasons 1:1(I), 1:2(II) e 1:3(III) metal-citric acid were synthesized using the Pechini method. We used techniques of TG / DTG and ATD to monitor the degradation process of organic matter to the formation of the oxide. By thermogravimetric analysis and applying the dynamic method proposed by Coats-Redfern, it was possible to study the reactions of thermal decomposition in order to propose the possible mechanism by which the reaction takes place, as well as the determination of kinetic parameters as activation energy, Ea, pre-exponential factor and parameters of activation. It was observed that both variables exert a significant influence on the formation of complex polymeric precursor. The model that best fitted the experimental data in the dynamic mode was R3, which consists of nuclear growth, which formed the nuclei grow to a continuous reaction interface, it proposes a spherical symmetry (order 2 / 3). The values of enthalpy of activation of the system showed that the reaction in the state of transition is exothermic. The variables of composition, together with the variable temperature of calcination were studied by different techniques such as XRD, IV and SEM. Also a study was conducted microstructure by the Rietveld method, the calculation routine was developed to run the package program FullProf Suite, and analyzed by pseudo-Voigt function. It was found that the molar ratio of variable metal-citric acid in the system CeO2-NiO (I), (II), (III) has strong influence on the microstructural properties, size of crystallites and microstrain network, and can be used to control these properties

Novel efficient technologies in Europe for axle bearing condition monitoring – the MAXBE project

Axle bearing damage with possible catastrophic failures can cause severe disruptions or even dangerous derailments, potentially causing loss of human life and leading to significant costs for railway infrastructure managers and rolling stock operators. Consequently the axle bearing damage process has safety and economic implications on the exploitation of railways systems. Therefore it has been the object of intense attention by railway authorities as proved by the selection of this topic by the European Commission in calls for research proposals. The MAXBE Project (http://www.maxbeproject.eu/), an EU-funded project, appears in this context and its main goal is to develop and to demonstrate innovative and efficient technologies which can be used for the onboard and wayside condition monitoring of axle bearings. The MAXBE (interoperable monitoring, diagnosis and maintenance strategies for axle bearings) project focuses on detecting axle bearing failure modes at an early stage by combining new and existing monitoring techniques and on characterizing the axle bearing degradation process. The consortium for the MAXBE project comprises 18 partners from 8 member states, representing operators, railway administrations, axle bearing manufactures, key players in the railway community and experts in the field of monitoring, maintenance and rolling stock. The University of Porto is coordinating this research project that kicked-off in November 2012 and it is completed on October 2015. Both on-board and wayside systems are explored in the project since there is a need for defining the requirement for the onboard equipment and the range of working temperatures of the axle bearing for the wayside systems. The developed monitoring systems consider strain gauges, high frequency accelerometers, temperature sensors and acoustic emission. To get a robust technology to support the decision making of the responsible stakeholders synchronized measurements from onboard and wayside monitoring systems are integrated into a platform. Also extensive laboratory tests were performed to correlate the in situ measurements to the status of the axle bearing life. With the MAXBE project concept it will be possible: to contribute to detect at an early stage axle bearing failures; to create conditions for the operational and technical integration of axle bearing monitoring and maintenance in different European railway networks; to contribute to the standardization of the requirements for the axle bearing monitoring, diagnosis and maintenance. Demonstration of the developed condition monitoring systems was performed in Portugal in the Northern Railway Line with freight and passenger traffic with a maximum speed of 220 km/h, in Belgium in a tram line and in the UK. Still within the project, a tool for optimal maintenance scheduling and a smart diagnostic tool were developed. This paper presents a synthesis of the most relevant results attained in the project. The successful of the project and the developed solutions have positive impact on the reliability, availability, maintainability and safety of rolling stock and infrastructure with main focus on the axle bearing health.

IDRISI COMO HERRAMIENTA PARA LA EVALUACIÓN DE ÁREAS NATURALES PROTEGIDAS. EL CASO DEL PARQUE NACIONAL NEVADO DE TOLUCA

Las áreas naturales en México se encuentran sujetas a intensos procesos de deterioro como resultado de la creciente intervención humana. Tal es el caso del Parque Nacional Nevado de Toluca localizado en la zona central del país. Mediante la aplicación del SIG Idrisi fue posible generar una base de datos para su caracterización general y evaluar los cambios en el uso del suelo a lo largo de un periodo de 30 años. Con los datos generados se analizaron los procesos de regeneración y deterioro de los bosques. También se determinó el nivel de adecuación del territorio para el desarrollo deespecies agrícolas y forestales dentro del área natural protegida. Los resultados obtenidos permiten corroborar que el parque nacional se viene deteriorando muy rápidamente y está siendo ocupado por actividades agrícolas y pecuarias para las que presenta niveles bajos de aptitud. La aplicación del Idrisi se vislumbra como una alternativa importante para continuar con el monitoreo del parque.Palabras clave: SIG Idrisi, uso del suelo, Parque Nacional Nevado de Toluca, México, nivel de adecuación.ABSTRACTPopulation growth in Mexico is affecting the natural protected areas of the country. This is the case of the Nevado de Toluca National Park, located in central Mexico. Application of the GIS Idrisi has been very useful to generate a cartographical database of the protected area and to evaluate the land-use changes over a 30-year period. With the land-change results it was possible to analyze the recovery-degradation processes. In order to define alternatives for the protection of the national park, a sustainability analysis is carried out for the main forestall and agricultural species. The primary results of the application allowed us to confirm there is a serious degradation process in the protected area. The Idrisi is seen as an important alternative for continued monitoring of the park.Keywords: GIS Idrisi, land use, Nevado de Toluca National Park, Mexico, sustainability standard.

Subchondral bone osteoblasts can induce chondrocyte mineralization during osteoarthritis and this process is relevant to cartilage degradation

Pathological mineralization of articular cartilage is a characteristic feature of osteoarthritis (OA); however, the underlying mechanisms, and their relevance to cartilage degeneration, are not clear. The involvement of subchondral bone changes in OA have been reported previously with the characterization of abnormal subchondral bone mineral density (BMD), osteiod volume, altered bone mechanical parameters and an increase in bone turnover markers. A number of osteoarthritic animal models have demonstrated that subchondral bone changes often precede cartilage degeneration. In this study site specific localization of mineralization markers were detected in the OA cartilage. Chondrocytes and osteoblasts derived from OA cartilage and subchondral bone showed a significant increase in the mRNA expressions of mineralization markers. Interestingly, osteoblasts from OA subchondral bone could significantly decrease cartilage matrix expression; whereas, increase mineralization of chondrocytes (Figure 1). Osteogenic factors, such as CBFA1, ALP, and type X collagen (Col-X), were detected in chondrocytes under mineralization conditions (Figure 2). Furthermore, chondrocyte mineralization was followed by increased mRNA and protein levels of MMP-2, MMP-9 and MMP-13, all of which are detrimental to cartilage integrity in vivo. The data reported here suggests that the upregulation of subchondral bone-mineralization, typical of OA progression, causes cartilage mineralization, and that the mineralization of chondrocytes induce increased MMP levels with a subsequent degradation of the articular cartilage.