A new technique to control insect infestation in Mas min

A process of heat treating Mas min at 125°C for 15 minutes and hermetically packing them up has been investigated. This method has been found to be successful in controlling insect infestation in Mas min. The Japanese method of packing Mas min in BHC coated containers has also been simultaneously examined and found successful under certain conditions. However, this process is found to impart slight undesirable flavors to the product. In addition, this chemical treatment is also likely to be more costly.

Substitution of Artemia with Brachionus in different ratios during larval rearing of Macrobrachium rosenbergii and evaluation of their feed efficacy

Larval growth during stage I-VIII was studied in Macrobrachium rosenbergii. Duration in moult periodicity were recorded-during larval development period, larvae were fed with Brachionus (grown on Baker's yeast and also Brachinous raised through organic manuring in outdoor culture containers). The performance of the feed was evaluated through substitution of Brachionus in the feeding protocol, in lieu of Artemia 1st instar. The Artemia, Brachionus substitution ratio of 75:25 was found to be most efficient. The study also indicates that the comparative growth rate of Brachionus plicatilis is higher in manure loaded tanks than with Baker's yeast. Growth rate "Y'' in culture tank being 0.245 and 0.112 and corresponding duplicating time (Td) too was found to be 2.855 and 6.365 respectively in tanks manured/enriched with pig manure.

Laboratory culture of Moina with organic ana inorganic fertilizers

An experiment was conducted in the laboratory condition to determine the effect of organic (poultry drop, cow dung and mustard oil cake) and inorganic fertilizer (urea) on production, reproduction rate and maturation time of Moina species. Production rate was also determined in both aerated and non-aerated system in plastic containers with carrying capacity of 2.5-liter each. Total production was significantly higher in both aerated (2475 individuals/2.5 l water) and non-aerated (3253 individuals/2.5 l water) containers using poultry manure compared to other fertilizers. Moreover, the reproduction rate and maturation time in poultry drops showed distinct efficacy in Moina species. Reproduction rate of 11 individuals was the maximal while lowest maturation time was found 78 hours. Reproduction and maturation were induced surprisingly in test tube where the aeration system was absent.

Investigations on long distance transportation of fish. 4. A comparative study of the performance of expanded polystyrene slabs and multi-layer gunny (jute) fabric as insulants

A comparative study of the insulation efficiencies of expanded polystyrene slabs and multi-layer gunny fabric in long distance transportation of fresh iced fish was made. Used plywood boxes (second hand tea chests) were employed as containers and the experiments conducted between Kakinada and Calcutta. All the three insulants tried, namely, 25.4 mm thick expanded polystyrene slab, four and two layer gunny (jute) fabric, all sealed in 150 gauge polythene sheets, showed comparable insulation efficiencies, considering total bacterial counts, organoleptic qualities and TMA and TVN values of the transported fish as parameters.

Demonstration of some selected aquaculture technologies under farming system research in Jessore and Santahar, Bangladesh

BFRI evolved some selected aquaculture technologies viz. polyculture of carps in perennial ponds, monoculture of short cycled fish species (BFRI super strain) in seasonal ponds and prawn seed production through backyard hatchery system have been demonstrated under Farming System Research (FSR) component in Jessore and Santahar regions. Both polyculture of carps and monoculture of short cycled fish species technologies were tested in farmer's ponds in Kaium Kula village near Jessore town. In polyculture trials, seven species comprising of silver carp (Hypophthalmichthys molirrix), catla (Catla catla), rohu (Labeo rohita), grass carp (Ctenopharyngodon idellus), common carp (Cyprinus carpio), mrigal (Cirrhinus cirrhosus) and silver barb (Barbonymus gonionotus) were stocked @ 9,500 (ratio 6:2:4:2:1:5:5); 10,750 (ratio 6:2:4:2:1:5:5) and 12,000 (ratio 6:2:4:2:1:5:4) fish/ha respectively in ponds of T1, T2 and T3 having three replications of each. The mean highest fish production was 3,148 kg/ha in T3, followed by 2,899 kg/ha in T1 and 2,875 kg/ha in T2. Production of T3 was significantly different (P<0.05) than both T1 and T2, while there was no significant differences (P>0.05) between the production of T1 and T2. In case of trial of short cycled fish species, two treatments were tested: T1 (comprising of BFRI super strain of Nile tilapia, silver carp, common carp and silver barb; ratio 3:5:1:1) and T2 (having only BFRI super strain of Nile tilapia). Stocking density in both the treatments were same (20,000 fish/ha). In this trial average production was higher in T1 (2,743 kg/ha) than that of T2 (2,369 kg/ha) but the production figure in these two treatments was not significantly different (P>0.05). Demonstration of backyard prawn hatchery technology was tested at Santahar region of Bogra district, North-west part of Bangladesh. This hatchery consisted of three main components i) bio-filter, ii) rearing tank unit (chari) and iii) air blower/air pump unit. Plastic drum of 200-250 l capacity and cemented chari of 200-250 l capacity were used as bio-filter and larval rearing containers respectively. A 0.5 hp air blower with 6 aquarium air pump were used to operate the aeration system in the hatchery. Diluted sea water (10-12 ppt) made from brine solution (200-250 ppt) collected from salt-bed was used in the backyard hatchery system of hatching of eggs and rearing of larvae. Rearing of first stage zoea-larvae was reared in three rearing tanks following the stocking densities of 40, 50 and 60/l of water respectively. Production of post-larvae were 20±0.82, 22±1.12 and 28±1.63/liter of water in treatments I, II and III respectively in 38, 40 and 39 days rearing period.

A review on oil sardine 2. Preservation by canning, curing and smoking

Commercial canning of oil sardine (Sardinella longiceps) in India is a relatively new procedure. Although 7 firms are engaged in canning this compares poorly with the abundance of the fish. There are often wide variations in the quality of the canned fish and important chemical and physical variations occur in the product once canned. A description of the canning process is given, and production figures compared to those of other countries. Production figures for 1965 to 1969 are given. These show that production increased from 1.2 to 1.5 million cans, but that there was a peak in 1967 when 3.2 million can s were produced. Exports of canned marine fish by country, and production of caned sardine by country from 1965 to 1970 are tabulated. The types of containers used and the feasibility of exporting canned fish are considered. Finally, the preparation of cured and smoked products is discussed briefly.

Identification and culture of common diatoms as possible feed for Penaeus monodon

Diatoms were collected from Buyuan Bay, and from the hatchery tanks at Tigbauan, to determine the commonly occurring species, the feasibility of culturing these species, and the potential of these selected species as food for larval P. monodon. The commonly occurring diatoms were identified as Chaetoceros calcitrans, Navicula grimmei, Nitzchia seriata, Nitzchia closterium and Amphiprora sp. These diatoms were isolated and unialgal cultures prepared. Protein content analysis using the micro-Kjildahl method gave the following result: C. calcitrans, 11 . 78%; Nitzchia seriata, 25%; Nitzchia closterium, 30 . 5%; Navicula grimmei, 9 . 06% and Amphiprora sp. 8 . 96%. Feeding experiments were conducted to determine acceptability of the different diatom species and percentage survival of larval stages Z SUB-1 -M SUB-2 . Larvae were placed in 4-l capacity plastic containers with a stocking density of 10/l. The results of several feeding trials using the different mass-produced diatoms are summarized. From the data gathered, C. calcitrans appears to be the most promising candidate as feed for zoea and mysis stages of P. monodon. The average percentage survival of C. calcitrans was 63 . 76% for the 3 trials, and as high as 82 . 22% in the third trial. Comparatively high percentage survival of larvae was also recorded when Nitzchia seriata (48 . 17%) and Nitzchia closterium (67 . 6%) were given as feed, while both Amphiprora sp. and Navicula grimmei gave 0% survival. The poor results with Amphiprora sp. and Navicula grimmei may be due to their low protein content (8 . 96% and 9 . 06%, respectively) and the inability of the larvae to ingest them. Navicula and Amphiprora were observed to cling to the appendages of the larvae and to settle down in the medium making them unavailable to the larvae. Low survival was also noted when frozen C. calcitrans was used (14 . 25%). This may be due partly to the effect of the floculating agent (ALSO SUB-4 . 25 g/l) used in concentrating the diatoms. When protein contents of C. calcitrans, N. seriata and N. closterium are compared, the 2 Nitzchia species have relatively higher protein contents than C. calcitrans and, therefore, could be the more desirable feed candidates. However, few feeding trials were made using Nitzchia so that additional investigations will have to be done on this aspect.

The study and production of fish sauce from Caspian Sea lam fish with traditional fermentation method and microbe and enzyme adding method and identification of important bacteria

Fish sauce is a popular fermented product used in south Asian countries which is made from different small fishes in this research work it was attempted to produce fish sauce from kilka of the Caspian sea, the fish sauce was made from three models of kilka ,such as whole kilka , cooked whole kilka and dressed kilka , each of these models treated it four different fashions of fermentation such as:1- Traditional method, 2- Enzymatic method 3- Microbial method, 4- Mixture of enzyme and microb The results of this investigation showed that time of fermentation for the traditional method was six month, enzymatic method one month, microbial method 3 month and the mixture of enzyme and microb 1 month. The rate of fermentation was least for dressed Kilka, microbial and biochemical changes of Kilka fish sauce were evaluated, total bacterial count was 2.1-6.15 log cfu/ml total volatile nitrogen (TVN) in samples recorded was 250 mg /100g, the amount of protein varied between 10-13 percent, the name of commercial enzymes added was Protamex and Flavourzyme, the bacteria added was L act ob acillus and Pediococous, fish sauce containers fish and 20% salt, temperature of keeping for fermentation was 37 degree c for 6 month.

Investigation on biodiversity and population structure of Penaeus sernisulcatus [sic] in northern waters of Persian Gulf

Green tiger prawn, Penaeus sentisulcatus is one of the commercial species of Persian Gulf, which is distributed from north to Strait of I Iormoze. Concerning its role in fisheries economic, various research projects on stock assessment, biology and aquaculture has been conducted. This research is targeted the identification of various populations of green tiger prawn in northern waters of Persian Gulf. The area has been divided to five regions from north to south named; Bahrakan, Boushehr, Tangestan, Motaaf and Strait of Hormoz. In each region, numbers of sampling stations trawled, and live shrimp species carried in containers equipped with air pump, to coastal laboratories in Boushehr and Bandar Abbass Fisheries Research Centers. Biometeric, morphometeric and merestic measures for 45 factars done, and peices of muscles, eye and ovary tissues dissected, and stored in liquid nitrogen. Protein extraction, and polyacrylamid gel electrophoresis by SDS-PAGE technique for tissues samples conducted. Data of 45 morphometeric and merestic characteristics analyzed by principal component analysis (PCA), and clustering analysis methods. The results of analysis showed that, the populations of Bahrakan and Mota.af regions are differentiated, while population of Boushehr and Tangestan regions were mixed, and named as a single population. The analysis of electrophoretic data also confirmed this result, and showed a distinct population in Strait of Hormoz. Therefore, this research illustrated four distinct populations for P. semisulcatus in northern area of Persian Gulf, named Bahrakan (north of Boushehr), Boushehr and Tangesta.n (adjacent), Motaaf and it's south, and Strait of Hormoz. Study of morphometeric characteristics of carapace factors, genital organs, antenna and life cycle of samples of different regions resulting identification of a subspecies, which is named Penaeus seinisuleatus persicus.

Exploring the use of sensors to measure behavioral interactions: an experimental evaluation of using hand trajectories.

Humans appear to be sensitive to relative small changes in their surroundings. These changes are often initially perceived as irrelevant, but they can cause significant changes in behavior. However, how exactly people's behavior changes is often hard to quantify. A reliable and valid tool is needed in order to address such a question, ideally measuring an important point of interaction, such as the hand. Wearable-body-sensor systems can be used to obtain valuable, behavioral information. These systems are particularly useful for assessing functional interactions that occur between the endpoints of the upper limbs and our surroundings. A new method is explored that consists of computing hand position using a wearable sensor system and validating it against a gold standard reference measurement (optical tracking device). Initial outcomes related well to the gold standard measurements (r = 0.81) showing an acceptable average root mean square error of 0.09 meters. Subsequently, the use of this approach was further investigated by measuring differences in motor behavior, in response to a changing environment. Three subjects were asked to perform a water pouring task with three slightly different containers. Wavelet analysis was introduced to assess how motor consistency was affected by these small environmental changes. Results showed that the behavioral motor adjustments to a variable environment could be assessed by applying wavelet coherence techniques. Applying these procedures in everyday life, combined with correct research methodologies, can assist in quantifying how environmental changes can cause alterations in our motor behavior.

The role of cell-surface-bound phosphatases in species competition within natural phytoplankton assemblage: an in situ experiment

Despite it is widely acknowledged that the ability to hydrolyze dissolved organic matter using extracellular phosphatases is diverse in fresh water phytoplankton, the competition within single species related to presence and quantity of cell-surface-bound phosphatases has not been examined in natural conditions yet. Here, we studied phytoplankton species competition in a freshwater reservoir during an in situ experiment. A natural plankton community, with the exclusion of large zooplankton, was enclosed in permeable dialysis bags inside two large containers of different bioavailable phosphate concentrations. Phytoplankton species biomass and the abundance of bacteria were determined in purpose to compare the development of enclosed microbial communities. Total and cell-surface-bound phosphatase activities in the phytoplankton were investigated using the Fluorescently Labelled Enzyme Activity (FLEA) technique that allows for direct microscopic detection of phosphatase-positive cells and, with image cytometry, enables quantification of phosphatase hydrolytic capacity. Production of extracellular phosphatases was not completely inhibited or stopped in the phosphate-enriched environment, phytoplankton cells only showed the activity less often. Under the phosphate-nonenriched conditions, the production of phosphatases was enhanced, but active species did not proliferate amongst phytoplankton assemblage. Further, specific growth rates of the phosphatase-positive species in the non-enriched environment were lower than the same phosphatase-positive species in phosphate-enriched environment. Interestingly, the phosphatase-positive cells of Ankyra ancora increased their size in both treatments equally, although the population in phosphate-enriched environment grew much faster and the cell-specific phosphatase activity was lower. We hypothesize that brand new daughter cells had sufficient phosphorus reserves and therefore did not employ extracellular phosphatases until they matured and needed extra bioavailable phosphorus to support their metabolism before cell division. Based on presented in situ experiment, we propose that the ability to hydrolyze organic polymers and particles with cell-surface-hound phosphatases is advantageous for longer persistence of given population in a phosphate-scarce environment; although phosphatase-positive species cannot dominate the reservoir phytoplankton solely because of specific phosphorus-scavenging strategy.

Analysis of expression of the binary toxin genes from Bacillus sphaericus in Anabaena and the potential in mosquito control

Anabaena strains expressing the binary toxin genes of Bacillus sphaericus produce high larvicidal activity with living cells. Western blot analysis showed that the 51-kDa and 42-kDa toxin proteins were stable in Anabaena. When a DNA fragment upstream of the 51-kDa protein gene was deleted, the toxicity was reduced by over a hundred-fold, whereas deletions at the coding regions showed that the cooperation of the two proteins expressed in Anabaena is essential for the larvicidal activity. Outdoor tests showed that the genetically altered Anabaena could keep containers with natural water from being inhabited by Culex larvae for over 2 months.

基于产品线工程的组件容器开发方法研究

近年来，随着Internet规模的增长，分布式组件技术快速发展，新的组件模型不断涌现，现有的组件模型也持续更新。组件容器为组件及组件应用提供部署和运行环境，是基于组件分布式应用开发的核心。组件模型的多样化和快速演化要求组件容器的开发方法将研究范围扩大到整个领域。产品线工程是基于软件核心资产构建软件产品系列的工程方法，将产品线工程方法应用于组件容器领域可以促进组件容器的系统化复用，获得更高的生产效率和产品质量。 由于组件容器领域的特点，应用过程中现有的产品线工程方法体现出一些不足。产品线工程包括领域工程和应用工程，其中领域工程又由领域分析、领域设计和领域实现构成。组件模型是组件容器需求的主要来源，但目前缺乏对组件模型的统一认识和详细分析；领域分析建模要求领域模型有效地刻画领域需求的组织结构、相互关系和变化性，并提供具体的建模过程指导，现有的面向特征、基于用例等领域建模方法存在语义模糊、粒度不当、缺乏具体流程指导等不足。 针对上述问题，论文按照软件开发流程顺序，从需求分析、领域建模、领域设计等方面，对组件容器设计和开发的若干关键问题进行了重点研究，包括组件模型分析、基于原子需求的领域建模方法、组件容器产品线体系结构等。 首先，由于组件模型是组件容器需求的主要来源，针对现有的组件模型分析方法粒度较大的问题，通过分析相关软件实体可能具有的各种约束，选择从语法、部署和交互三个方面，得到构成组件模型的模型元素，提出了一个细粒度的组件模型分析框架。将该分析框架应用于目前有代表性的分布式组件模型，基于分析结果提炼了分布式组件模型的主要公共特征，并与其他分析方法做了对比。 另一方面给出了基于原子需求的领域建模方法。以原子需求概念为基础，提出了一个多层次的领域需求描述模型，从用例、原子需求等多个层次刻画领域需求，并基于变化点建立独立的变化性描述机制。介绍了相应的领域建模过程，包括其建模步骤、建模原则和描述规范，为领域分析人员提供具体指导。并结合领域实例探讨了领域建模的过程。 基于以上工作，本文设计了组件容器产品线体系结构PLACE。首先将基于软件实体的组件模型分析框架与基于原子需求的领域建模方法相结合，建立组件容器领域模型，进而提出了组件容器产品线体系结构PLACE，从体系结构、模块功能、变化性设计和变化性管理等方面介绍了其设计。具体组件容器的设计实例表明，PLACE通过在组件模型和体系结构间建立直接的对应关系，有效促进了组件容器领域内的系统化复用。 最后，我们将上述方法应用于网驰平台中组件容器产品系列包括Web容器、EJB容器、BPEL容器和Portlet容器等的设计。实验结果证实了基于PLACE的开发方法在保证产品功能正确性的同时，提高了组件容器领域内的结构复用性，获得了更高的生产效率和产品质量。

STL格式文件拓扑重建及快速切片算法研究

建立三角面片之间拓扑关系是提高分层切片效率的关键因素之一,提出基于标准模板库set容器的拓扑关系重建算法及快速切片算法,有效地去除了STL文件大量冗余数据,简化了数据的存储,该算法每一个三角面片在每一切平面内只求一次交点,切片完成后可直接得到封闭轮廓环,以减少在切片过程中对三角面片的遍历次数、排序次数及求交点计算量,简化了轮廓环的构造过程,从而有效地提高了算法的效率。

Arquitetura de software para a manutenção de dados da Agência de Informação Embrapa.

A agencia de informação Embrapa disponibiliza na internet informação qualificada e organizada e, muitas vezes, também aquelas geradas pela própria Embrapa. As soluções de software esposta neste trabalho são dirigidas ao gerenciamento dessas informações, que são armazenadas em base de dados centralizada e atualizada via internet por aplicativos deste sistema. O objetivo de apresentar essas soluções é contribuir para o desenvolvimento de sistemas com orientação metodológica similar. Este sistema teve como principal identificação de requisitos as falhas existentes na primeira versão do mesmo, que foi orientada exclusivamente para manipulação de dados formatados em XML. A nova versão traz uma arquitetura baseada nas orientações Java 2 Enterprise Editon (J2EE): modelo em camadas (orientação Model View Controler-MVC), uso de containers e sistema gerenciador de banco de dados. O resultado é um sistema mais robusto em seu todo, além das melhorias de manutenabilidade. Termos para indexação:J2EE, XML, PDOM, Model view controller- MVC, Oracle.