Major- and trace-element chemistry of DSDP Leg 70 Holes basalts and their alteration products

Major and trace element compositions of basalts from the lower part of Hole 504B indicate their cogenetic nature. The cored sequence of interlayered pillow lavas and massive lava flows was produced by eruption of lavas, slightly variable in composition. Plagioclase and olivine crystallization in a shallow magma chamber, followed by small-scale fractionation at higher levels, is responsible for these variations. Except in highly fractured zones within the basement, there are systematic variations in the style and degree of rock alteration with depth. Trace element characteristics of altered rocks and secondary minerals indicate that progressive changes in sea water composition occurred as it reacted with basaltic crust.

Cross-Products LASSO

Negative co-occurrence is a common phenomenon in many signal processing applications. In some cases the signals involved are sparse, and this information can be exploited to recover them. In this paper, we present a sparse learning approach that explicitly takes into account negative co-occurrence. This is achieved by adding a novel penalty term to the LASSO cost function based on the cross-products between the reconstruction coefficients. Although the resulting optimization problem is non-convex, we develop a new and efficient method for solving it based on successive convex approximations. Results on synthetic data, for both complete and overcomplete dictionaries, are provided to validate the proposed approach.

Co-creación de semiconductores

El mercado de los semiconductores está saturado de productos similares y de distribuidores con una propuesta de servicios similar. Los procesos de Co-Creación en los que el cliente colabora en la definición y desarrollo del producto y proporciona información sobre su utilidad, prestaciones y valor percibido, con el resultado de un producto que soluciona sus necesidades reales, se están convirtiendo en un paso adelante en la diferenciación y expansión de la cadena de valor. El proceso de diseño y fabricación de semiconductores es bastante complejo, requiere inversiones cada vez mayores y demanda soluciones completas. Se requiere un ecosistema que soporte el desarrollo de los equipos electrónicos basados en dichos semiconductores. La facilidad para el diálogo y compartir información que proporciona internet, las herramientas basadas en web 2.0 y los servicios y aplicaciones en la nube; favorecen la generación de ideas, el desarrollo y evaluación de productos y posibilita la interacción entre diversos co-creadores. Para iniciar un proceso de co-creación se requiere métodos y herramientas adecuados para interactuar con los participantes e intercambiar experiencias, procesos para integrar la co-creación dentro de la operativa de la empresa, y desarrollar una organización y cultura que soporten y fomenten dicho proceso. Entre los métodos más efectivos están la Netnografía que estudia las conversaciones de las comunidades en internet; colaboración con usuarios pioneros que van por delante del Mercado y esperan un gran beneficio de la satisfacción de sus necesidades o deseos; los estudios de innovación que permiten al usuario definir y a menudo crear su propia solución y la externalización a la multitud, que mediante una convocatoria abierta plantea a la comunidad retos a resolver a cambio de algún tipo de recompensa. La especialización de empresas subcontratistas en el desarrollo y fabricación de semiconductores; facilita la innovación abierta colaborando con diversas entidades en las diversas fases del desarrollo del semiconductor y su ecosistema. La co-creación se emplea actualmente en el sector de los semiconductores para detectar ideas de diseños y aplicaciones, a menudo mediante concursos de innovación. El servicio de soporte técnico y la evaluación de los semiconductores con frecuencia es fruto de la colaboración entre los miembros de la comunidad fomentada y soportada por los fabricantes del producto. Con el programa EBVchips se posibilita el acceso a empresas pequeñas y medianas a la co-creación de semiconductores con los fabricantes en un proceso coordinado y patrocinado por el distribuidor EBV. Los semiconductores configurables como las FPGAs constituyen otro ejemplo de co-creación mediante el cual el fabricante proporciona el circuito integrado y el entorno de desarrollo y los clientes crean el producto final definiendo sus características y funcionalidades. Este proceso se enriquece con bloques funcionales de diseño, IP-cores, que a menudo son creados por la comunidad de usuarios. ABSTRACT. The semiconductor market is saturated of similar products and distributors with a similar proposal for services. The processes of co-creation in which the customer collaborates in the definition and development of the product and provides information about its utility, performance and perceived value, resulting in a product that solves their real needs, are becoming a step forward in the differentiation and expansion of the value chain. The design and semiconductor manufacturing process is quite complex, requires increasingly higher investments and demands complete solutions. It requires an ecosystem that supports the development of electronic equipments based on such semiconductors. The ease of dialogue and sharing information that provides internet, web 2.0-based tools and services and applications in the cloud; favor the generation of ideas, the development and evaluation of products and allows the interaction between various co-creators. To start a process of co-creation adequate methods and tools are required to interact with the participants and exchange experiences, processes to integrate the co-creation within the operations of the company, and developing an organization and culture that support and promote such process. Among the most effective methods are the Netnography that studies the conversations of the communities on the internet; collaboration with Lead Users who are ahead of the market and expect a great benefit from the satisfaction of their needs or desires; Innovation studies that allow the user to define and often create their own solution and Crowdsourcing, an open call to the community to solve challenges in exchange for some kind of reward. The specialization of subcontractors in the development and manufacture of semiconductors; facilitates open innovation in the context of collaboration with different entities working in the different phases of the development of the semiconductor and its ecosystem. Co-creation is used currently in the semiconductor sector to detect ideas of designs and applications, often through innovation’s contests. Technical support and evaluation of semiconductors frequently is the result of collaboration between members of the community fostered and supported by the manufacturers of the product. The EBVchips program provides access to small and medium-sized companies to the co-creation of semiconductors with manufacturers in a process coordinated and sponsored by the Distributor EBV. Configurable semiconductors like FPGAs are another example of co-creation whereby the manufacturer provides the integrated circuit and the development environment and customers create the final product by defining their features and functionality. This process is enriched with IP-cores, designs blocks that are often created by the user community.

Characterization of gas emissions during heating of solid products

The emission of different harmful gases during the storage of solid fuels is a common phenomenon. The gases emitted during the heating process of those combustibles are the same as those emitted during combustion, mainly CO and CO2[1]. Nowadays, measurement of these emissions is mandatory. That is why in many industrial facilities different gas detectors are located to measure these gases. But it should be also useful if emissions could be predicted and the temperatures at the beginning of the emission process could be determined.

Determinación de propiedades de inflamabilidad de mezclas para co-combustión

La recuperación de energía a partir de biomasa y residuos no reciclables por la combustión está cobrando una notable importancia actualmente. Una de las técnicas más utilizadas para esta propuesta es la co-combustión de mezclas de residuos y biomasa. Con esta nueva tecnología, mezclas de diferentes materiales han aparecido en las instalaciones industriales y tienen que ser reconocidas como nuevos combustibles, debido a que a sus propiedades son aún desconocidas. Estas propiedades incluyen las energéticas, que son el objetivo del proceso de mezcla, y también las propiedades de inflamabilidad. Residuos y biomasa en forma de polvos tienen propiedades de ignición que se han de tener en cuenta a la hora de diseñar las medidas de prevención y protección en una instalación industrial. El objetivo principal de este estudio es determinar el riesgo de ignición de las mezclas de residuos / biomasa en capas y cómo, mediante la adición de diferentes cantidades de estos materiales, este riesgo puede cambiar. Para desarrollar este estudio, se utiliza la temperatura mínima de ignición en la capa. Tres muestras diferentes han sido analizadas, lodos con secado térmico de depuradora, paja de trigo y virutas de madera, Abstract Energy recovery from biomass and non-recyclable waste products by combustion has become important. One of the most used techniques for this proposal is the co-firing of waste and biomass mixtures, With this new technology, mixtures of different materials have appeared in the industrial facilities and they have to be treated as new fuels because their properties are unknown. Among this properties we include energetic properties that are the objective of the mixing process, and also the ignitability properties. Waste and biomass dusts have ignition properties that have to be taken into account in the design but also in the, prevention and protection process of an industrial facility.. The main objective of this research is to determine the risk of ignition of waste / biomass mixtures layers and how, by adding different quantities of these materials, this risk may vary. To develop this, the minimum ignition temperature on layer is used. Three different samples have been analysed, thermally dried sewage sludge, wheat straw and wood chips.

Testing co-volatility spillovers for natural gas spot, futures and ETF spot using dynamic conditional covariances

There is substantial empirical evidence that energy and financial markets are closely connected. As one of the most widely-used energy resources worldwide, natural gas has a large daily trading volume. In order to hedge the risk of natural gas spot markets, a large number of hedging strategies can be used, especially with the rapid development of natural gas derivatives markets. These hedging instruments include natural gas futures and options, as well as Exchange Traded Fund (ETF) prices that are related to natural gas stock prices. The volatility spillover effect is the delayed effect of a returns shock in one physical, biological or financial asset on the subsequent volatility or co-volatility of another physical, biological or financial asset. Investigating volatility spillovers within and across energy and financial markets is a crucial aspect of constructing optimal dynamic hedging strategies. The paper tests and calculates spillover effects among natural gas spot, futures and ETF markets using the multivariate conditional volatility diagonal BEKK model. The data used include natural gas spot and futures returns data from two major international natural gas derivatives markets, namely NYMEX (USA) and ICE (UK), as well as ETF data of natural gas companies from the stock markets in the USA and UK. The empirical results show that there are significant spillover effects in natural gas spot, futures and ETF markets for both USA and UK. Such a result suggests that both natural gas futures and ETF products within and beyond the country might be considered when constructing optimal dynamic hedging strategies for natural gas spot prices.

Conversion of low density polyethylene into fuel through co-processing with vacuum gas oil in a fluid catalytic cracking riser reactor

In this work, mixtures of vacuum gas oil and low density polyethylene, a major component of common industrial and consumer household plastics, were pyrolytically co-processed in a fluid catalytic cracking (FCC) riser reactor as a viable alternative for the energy and petrochemical revalorisation of plastic wastes into valuable petrochemical feedstocks and fuel within an existing industrial technology. Using equilibrium FCC catalyst, the oil–polymer blends were catalytically cracked at different processing conditions of temperatures between 773 K and 973 K and catalyst feed ratios of 5:1, 7:1 and 10:1. The influence of each of these processing parameters on the cracking gas and liquid yield patterns were studied and presented. Further analysed and presented are the different compositional distributions of the obtained liquids and gaseous products. The analysis of the results obtained revealed that with very little modifications to existing process superstructure, yields and compositional distributions of products from the fluid catalytic cracking of the oil–polymer blend in many cases were very similar to those of the processed oil feedstock, bringing to manifest the viability of the feedstock co-processing without significant detriments to FCC product yields and quality.

Hydrothermal Carbons from Hemicellulose-Derived Aqueous Hydrolysis Products as Electrode Materials for Supercapacitors

Acid pretreatment of lignocellulosic biomass, required for bioethanol production, generates large amounts of by-products, such as lignin and hydrolyzed hemicellulose fractions, which have found so far very limited applications. In this work, we demonstrate how the recovered hemicellulose hydrolysis products can be effectively utilized as a precursor for the synthesis of functional carbon materials through hydrothermal carbonization (HTC). The morphology and chemical structure of the synthesized HTC carbons are thoroughly characterized to highlight their similarities with glucose-derived HTC carbons. Furthermore, two routes for introducing porosity within the HTC carbon structure are presented: i) silica nanoparticle hard-templating, which is shown to be a viable method for the synthesis of carbonaceous hollow spheres; and ii) KOH chemical activation. The synthesized activated carbons (ACs) show an extremely high porosity (pore volume≈1.0 cm3 g−1) mostly composed of micropores (90 % of total pore volume). Because of their favorable textural properties, the ACs are further tested as electrodes for supercapacitors, yielding very promising results (300 F g−1 at 250 mA g−1) and confirming the high suitability of KOH-activated HTC carbons derived from spruce and corncob hydrolysis products as materials for electric double layer supercapacitors.

An Introduction to the chemistry of plant products / by Paul Haas, ... and TG. Hill, ... Vol. 2 : Metabolic processes.

2

Cornfield products : a little journey thru a modern packing plant.

Promotional literature for White Provision Co.

Modern methods of testing milk and milk products; a handbook prepared for the use of dairy students, butter-makers, cheese-makers, producers of milk, operators in condenseries, managers of milk-shipping stations, milk-inspectors, physicians, etc.,

Mode of access: Internet.

Tempting kosher dishes : prepared from world famous Manischewitz's matzo products /

Includes index.

South America as I saw it; the observations of a naturalist on the living conditions of its common people; its topography and products; its animals and plants;

Mode of access: Internet.

Manufactured milk products journal.

Absorbed by Milk dealer.

Principles and practice of agricultural analysis; a manual for the study of soils, fertilizers, and agricultural products; for the use of analysists, teachers, and students of agricultural chemistry.

v. 1. Soils. -v. 2. Fertilizers and insecticides. -v.3. Agricultural products.