Analysis of corporate social responsibility (CSR) performance and financial performance of selected mining companies

The global concern about sustainability has been growing and the mining industry is questioned about its environmental and social performance. Corporate social responsibility (CSR) is an important issue for the extractive industries. The main objective of this study was to investigate the relationship between CSR performance and financial performance of selected mining companies. The study was conducted by identifying and comparing a selection of available CSR performance indicators with financial performance indicators. Based on the result of the study, the relationship between CSR performance and financial performance is unclear for the selected group of companies. The result is mixed and no industry specific realistic way to measure CSR performance uniformly is available. The result as a whole is contradictory and varies at company level as well as based on the selected indicators. The result of this study confirms that the relationship between CSR performance and financial performance is complicated and difficult to determine. As an outcome, evaluation of benefits of CSR in the mining sector could better be analyzed based on different attributes.

A Phase Model for Building a Customer Value Based Sales Tool – Case Mining and Metals Industry

The objective of this research is to observe the state of customer value management in Outotec Oyj, determine the key development areas and develop a phase model with which to guide the development of a customer value based sales tool. The study was conducted with a constructive research approach with the focus of identifying a problem and developing a solution for the problem. As a basis for the study, the current literature involving customer value assessment and solution and customer value selling was studied. The data was collected by conducting 16 interviews in two rounds within the company and it was analyzed by coding openly. First, seven important development areas were identified, out of which the most critical were “Customer value mindset inside the company” and “Coordination of customer value management activities”. Utilizing these seven areas three functionality requirements, “Preparation”, “Outotec’s value creation and communication” and “Documentation” and three development requirements for a customer value sales tool were identified. The study concluded with the formulation of a phase model for building a customer value based sales tool. The model included five steps that were defined as 1) Enable customer value utilization, 2) Connect with the customer, 3) Create customer value, 4) Define tool to facilitate value selling and 5) Develop sales tool. Further practical activities were also recommended as a guide for executing the phase model.

The demand-supply balancing process in supply chain management - case mining & metals industry equipment

The aim of this thesis is to search how to match the demand and supply effectively in industrial and project-oriented business environment. The demand-supply balancing process is searched through three different phases: the demand planning and forecasting, synchronization of demand and supply and measurement of the results. The thesis contains a single case study that has been implemented in a company called Outotec. In the case study the demand is planned and forecasted with qualitative (judgmental) forecasting method. The quantitative forecasting methods are searched further to support the demand forecast and long term planning. The sales and operations planning process is used in the synchronization of the demand and supply. The demand forecast is applied in the management of a supply chain of critical unit of elemental analyzer. Different meters on operational and strategic level are proposed for the measurement of performance.

Data and Inventory Management in Spare Part Business: Developing Operations in the Case Company

After sales business is an effective way to create profit and increase customer satisfaction in manufacturing companies. Despite this, some special business characteristics that are linked to these functions, make it exceptionally challenging in its own way. This Master’s Thesis examines the current situation of the data and inventory management in the case company regarding possibilities and challenges related to the consolidation of current business operations. The research examines process steps, procedures, data requirements, data mining practices and data storage management of spare part sales process, whereas the part focusing on inventory management is reviewing the current stock value and examining current practices and operational principles. There are two global after sales units which supply spare parts and issues reviewed in this study are examined from both units’ perspective. The analysis is focused on the operations of that unit where functions would be centralized by default, if change decisions are carried out. It was discovered that both data and inventory management include clear shortcomings, which result from lack of internal instructions and established processes as well as lack of cooperation with other stakeholders related to product’s lifecycle. The main product of data management was a guideline for consolidating the functions, tailored for the company’s needs. Additionally, potentially scrapped spare part were listed and a proposal of inventory management instructions was drafted. If the suggested spare part materials will be scrapped, stock value will decrease 46 percent. A guideline which was reviewed and commented in this thesis was chosen as the basis of the inventory management instructions.

Laura Secord: a study in Canadian patriotism : being an address delivered before the Canadian Club, of Winnipeg, May 1st, 1907 /

Cover title.

Niagara-Welland Power Company Limited fonds, 1833, 1852, 1904-1906, 1909, n.d.

The Welland Power and Supply Canal Company Limited, established in 1893 and incorporated in 1894 with a capital stock of $500,000. The aim of the company was to harness the natural water supply of the Niagara and Welland Rivers. In 1898 the Canadian Electrical News published a report by Henry Symons, QC outlining the main project of the company. This project involves the construction of a canal from the Welland River to the brow of the mountain at Thorold, a distance of 8 miles; the construction at Thorold of a power house, and from Thorold to Lake Ontario, a raceway by which to carry water into the lake. The estimate for the machinery to generate 100,000 horse power is £125,000; for transmission line to Toronto at a voltage of 10,000….The total estimate therefore amounts to £2,452,162, or roughly speaking, $12,000,000. Source: Canadian Electrical News, August 1898, p. 172. In 1899 the company officers petitioned the federal government desiring a name change to the Niagara-Welland Power Company Limited. Officers of the company were Harry Symons, President; Charles A. Hesson, Vice-President; and M.R. O’Loughlin, James B. Sheehan, James S. Haydon, Frederick K. Foster, directors; John S. Campbell, secretary-treasurer. The company’s head offices were located in St. Catharines, with a New York (City) office on Broad Street. In 1905 and 1909 the company petitioned the federal government for additional time to construct its works, which was granted. The company had until May 16, 1915 to complete construction. John S. Campbell (1860-1950) was a graduate of the University of Toronto and Osgoode Hall. During his university years John began his military career first in "K" Company, Queens Own rifles and then later as Commanding Officer of the 19th Lincoln Regiment, from 1906 to 1910. Upon his return to St. Catharines John Campbell served as secretary in the St. Catharines Garrison Club, a social club for military men begun in 1899. After being called to the Bar, he became a partner in the firm of Campbell and McCarron and was appointed to the bench in 1916, serving until retirement in 1934. Judge Campbell served as an alderman for several terms and was the mayor of St. Catharines in 1908 and 1909. He also served as the first chairman of the St. Catharines Public Utilities in 1914. John S. Campbell was married to Elizabeth Oille, daughter of Jerome B. and Charlotte (St. John) Oille. The family home "Cruachan" was located at 32 Church St.

Niagara Falls Suspension Bridge Company fonds, 1875-1876, 1878, 1884

In 1846, the governments of Upper Canada and the State of New York initiated the creation of two companies that would be authorized to build a bridge over the Niagara River. The bridge was to be owned by both companies, respectively known as the Niagara Falls Suspension Bridge Company (Canadian) and the International Bridge Company (American). A suspension bridge was completed in 1848. This bridge was later replaced by a second suspension bridge that accommodated railways, built in 1853-54. However, the increasing weight of trains made it necessary for the bridge to be redesigned, and a third bridge was completed in 1886. Eventually, this bridge was replaced by a steel arch bridge, which was completed in 1897.

Electrical Development Company of Ontario certificate of stock ownership, ca. 1910.

The Electrical Development Company of Ontario was created in 1903. It was one of three private power companies that had water power leases with the Niagara Parks Commission, but was the only one that was financed with Canadian capital. The company built the Toronto Power Generating Station at Niagara Falls beginning in 1906, and the power house was completed in 1913. During the construction, there was much debate about whether the utility should remain privately operated or become a public utility. In 1920, the company became part of the public utility.

Letter - Frederic Nicholls (Canadian General Electric) to W.B. Rankine, 17 December 1897

A letter from 2nd Vice President and General Manager of Canadian General Electric Company, Frederic Nicholls to W. B. Rankine regarding a bid for contract. The letter mentions that the bid for two alternating generators for the Canadian side of Niagara Falls was won by Westinghouse Eletric and Manufacturing Co. Nicholls also mentions that there will be other opportunites to win contracts as more machines are required. Nicholls also implies that Westinghouse may have bid under cost in an effort to secure the first of many contracts with the Canadian Niagara Power Company.

The Impact of a Corporate Name Change on Stock Price and Trading Volume of Canadian Companies

This thesis examines the impact of a corporate name change on stock price and trading volume of Canadian companies around the announcement date, the approval date, and the adoption date over the time period from 1997 to 2011. Name changes are classified into six categories: major and minor, structural and pure, diversified and focused, accompanied with a change in ticker symbol and without a change in ticker symbol, “Gold” name addition and deletion, and different reasons for name changes (e.g., merger and acquisition, change of structure, change of strategy, and better image). The thesis uses the standard event study methodology to perform abnormal return and trading volume analyses. In addition, regression analysis is employed to examine which type of a name change has the largest impact on cumulative abnormal returns. Sample stocks exhibit a significant positive abnormal return one-day prior to the approval day and one day after the adoption date. Around the approval date we observe significant abnormal returns for stocks with a structural name change. On the day after the adoption date we document abnormal returns for stocks with major, minor, structural, pure, focused, and ticker symbol name changes. If a merger or acquisition is the reason for a name change, companies tend to experience a significant positive abnormal return one-day before the approval date and on the adoption date. If a change of structure is the reason for a name change, companies exhibit a significant positive abnormal return on the approval date and a significant negative abnormal return on the adoption date. In case of a change of strategy as the reason for a name change, companies show a significant negative abnormal return around the approval date and a significant positive abnormal return around the adoption date.

Canadian Niagara Power League Meeting (1897)

Remarks of Mr. William B. Rankine, secretary of the Canadian Niagara Power Company.

The Death of Brock at Queenston Heights, 1812: Imperial Tobacco Company silk card

General Isaac Brock was a British Army officer and administrator who was promoted to Major General. He was responsible for defending Upper Canada against the United States. He died at the Battle of Queenston Heights during the War of 1812. Bartholome Houde and George E. Tuckett (Tuckett was mayor of Hamilton Ontario in 1896) manufactured and sold tobacco before Confederation. In 1841, the company was called B. Houde and Grothe. When Houde retired in 1822 his son in law, Francis Xavier Dussault took over the company. In 1903, the company was called B. Houde and Company Ltee. and it was run by Dussault’s two sons J.A. Dussault and J.E. Dussault. The B. Houde Company had become part of American Tobacco Ltd. which merged with Empire Tobacco Co. Ltd. to form the Imperial Tobacco Company in 1908 in the St. Henri district of Montreal. In 2008, the company celebrated their centennial. Cigarette silks were either enclosed in packets of cigarettes or were redeemable by mail. People would sew these silks together to create quilts or table covers. Some cigarette packages even included instructions for making these items.

Canadian Niagara Power Glass Slide - Group of men walking through the hydro tunnel

Four men (unidentified) walking in tunnel wearing hard hats and carrying flashlights.

Canadian Niagara Power Glass Slide - Engineer Drawing of Sections of Discharge Tunnel

Consulting Engineer drawing of Sections of the Discharge Tunnel. Included in the drawing is the "cross section of tunnel with timbering" and "longitudinal section showing Timber in straight tunnel". Dated October 1902.