The Effect of Active Student Responding in Computer-Assisted Instruction on Social-Studies Learning by Students with Learning Disabilities: A Brief Report

An alternating treatment design was used to compare the effects of three student response conditions (Clicking, Repeating, and Listening) during computer-assisted instruction on social-studies facts learning and maintenance. Results showed that all students learned and maintained more social-studies facts taught in the Repeating condition followed by the Clicking condition.

Achievement of generic baccalaureate student nurses using computer -assisted instruction simulations during a nursing review course

The use of computer assisted instruction (CAI) simulations as an instructional strategy provides nursing students with a critical thinking approach for evaluating risks and benefits and choosing correct alternatives in "safe" patient care situations. It was hypothesized that using CAI simulations during an upper level nursing review course would have a positive effect on the students' posttest scores. Subjects (n = 36) were senior nursing students enrolled in a nursing review course in an undergraduate baccalaureate program. A limitation of the study was the small sample size. The study employed a modified group experimental design using the t test for independent samples. The group who received the CAI simulations during the physiological system review demonstrated a significant increase (p $<$.01) in the posttest score mean when compared to the lecture-discussion group score mean. There was no significant difference between high and low clinical grade point average (GPA) students in the CAI and lecture-discussion groups and their score means on the posttest. However, score mean differences of the low clinical GPA students showed a greater increase for the CAI group than the lecture-discussion group. There was no significant difference between the groups in their system content subscore means on the exit examination completed three weeks later. It was concluded that CAI simulations are as effective as lecture-discussion in assisting upper level students to process information for clinical decision making. CAI simulations can be considered as an instructional strategy to supplement or replace lecture content during a review course, allowing more efficient use of faculty time. It is recommended that the study be repeated using a larger sample size. Further investigations are recommended in comparing the effectiveness of computer software formats and various instructional strategies for other learning situations and student populations. ^

The effect of active student responding in computer -assisted instruction on social -studies learning by students with learning disabilities

The purpose of this study was to compare the effects of three student response conditions during computer-assisted instruction on the acquisition and maintenance of social-studies facts. Two of the conditions required active student responding (ASR), whereas the other required an on-task (OT) response. Participants were five fifth-grade students, with learning disabilities enrolled in a private school. An alternating treatments design with a best treatments phase was used to compare the effects of the response procedures on three major dependent measures: same-day tests, next-day tests, and maintenance tests. ^ Each week for six weeks, participants were provided daily one-to-one instruction on sets of 21 unknown social-studies facts using a hypermedia computer program, with a new set of facts being practiced each week. Each set of 21 facts was divided randomly into three conditions: Clicking-ASR, Repeating-ASR, and Listening-OT. Hypermedia lesson began weekly with the concept introduction lesson, followed by practice and testing. Practice and testing occurred four days per week, per set. During Clicking-ASR, student practice involved the selection of a social-studies response by clicking on an item with the mouse on the hypermedia card. Repeating-ASR instruction required students to orally repeat the social-studies facts when prompted by the computer. During Listening-OT, students listened to the social-studies facts being read by the computer. During weeks seven and eight, instruction occurred with seven unknown facts using only the best treatment. ^ Test results show that all for all 5 students, the Repeating-ASR practice procedure resulted in more social-studies facts stated correctly on same-day tests, next-day tests, and one-and two-week maintenance tests. Clicking-ASR was the next most effective procedure. During the seventh and eighth week of instruction when only the best practice condition was implemented, Repeating-ASR produced higher scores than all conditions (including Repeating-ASR) during the first six weeks of the study. ^ The results lend further support to the growing body of literature that demonstrates the positive relation between ASR and student achievement. Much of the ASR literature has focused on the effects of increased ASR during teacher-led or peer-mediated instruction. This study adds a dimension to that research in that it demonstrated the importance of ASR during computer-assisted instruction and further suggests that the type of ASR used during computer-assisted instruction may influence learning. Future research is needed to investigate the effectiveness of other types of ASR during computer-assisted instruction and to identify other fundamental characteristics of an effective computer-assisted instruction. ^

Computer assisted synthesis and in-vitro cytotoxic evaluation of new pyrazole-fused isoquinolinoquinones derivatives as PI3K receptor antagonist with promising antitumoral activity

The importance of pyrazole and isoquinoline-5,8-dione scaffolds in medical chemistry is underlined by the high number of drugs currently on trading that contains these active ingredients. Due to their cytotoxic capability, the interest of medicinal chemists in these heterocyclic rings has grown exponentially especially, for cancer therapy. In this project, the first synthesis of pyrazole-fused isoquinoline-5,8-diones has been developed. 1,3-Dipolar cycloaddition followed by oxidative aromatization, established by our research group, has been employed. Screening of reaction conditions and characterization studies about the regioselectivity have been successfully performed. A remote control of regioselectivity, to achieve the two possible regioisomers has been accomplished. Through Molecular Docking studies, Structure-Activity relationship of differently substituted scaffolds containing our central core proved that a family of PI3K inhibitors have been discovered. Finally, in order to verify the promising antitumor activity, a first test of cell viability in vitro on T98G cell line of a solid brain tumor, the Glioblastoma Multiforme, showed cytotoxic inhibition comparable to currently trade anticancer drugs.

Computer Assisted Content Analysis of the print press coverarge of corruption in Hungary

Coverage of corruption in the Hungarian media was analyzed using four online news portals. Three of them, Magyar Nemzet Online (short name: MNO, web: mno.hu), Népszava (web: nepszava.hu) and Heti Világgazdaság (web: hvg.hu) are also available as newspapers but the content of these papers is different from the online form to a certain extent. The news portal Origo (web: origo.hu) has no print version.

Accuracy of computer-aided design/computer-assisted manufacture (CAD/CAM) fabricated dental restorations: a comparative study

Introduction: Computer-Aided-Design (CAD) and Computer-Aided-Manufacture (CAM) has been developed to fabricate fixed dental restorations accurately, faster and improve cost effectiveness of manufacture when compared to the conventional method. Two main methods exist in dental CAD/CAM technology: the subtractive and additive methods. While fitting accuracy of both methods has been explored, no study yet has compared the fabricated restoration (CAM output) to its CAD in terms of accuracy. The aim of this present study was to compare the output of various dental CAM routes to a sole initial CAD and establish the accuracy of fabrication. The internal fit of the various CAM routes were also investigated. The null hypotheses tested were: 1) no significant differences observed between the CAM output to the CAD and 2) no significant differences observed between the various CAM routes. Methods: An aluminium master model of a standard premolar preparation was scanned with a contact dental scanner (Incise, Renishaw, UK). A single CAD was created on the scanned master model (InciseCAD software, V2.5.0.140, UK). Twenty copings were then fabricated by sending the single CAD to a multitude of CAM routes. The copings were grouped (n=5) as: Laser sintered CoCrMo (LS), 5-axis milled CoCrMo (MCoCrMo), 3-axis milled zirconia (ZAx3) and 4-axis milled zirconia (ZAx4). All copings were micro-CT scanned (Phoenix X-Ray, Nanotom-S, Germany, power: 155kV, current: 60µA, 3600 projections) to produce 3-Dimensional (3D) models. A novel methodology was created to superimpose the micro-CT scans with the CAD (GOM Inspect software, V7.5SR2, Germany) to indicate inaccuracies in manufacturing. The accuracy in terms of coping volume was explored. The distances from the surfaces of the micro-CT 3D models to the surfaces of the CAD model (CAD Deviation) were investigated after creating surface colour deviation maps. Localised digital sections of the deviations (Occlusal, Axial and Cervical) and selected focussed areas were then quantitatively measured using software (GOM Inspect software, Germany). A novel methodology was also explored to digitally align (Rhino software, V5, USA) the micro-CT scans with the master model to investigate internal fit. Fifty digital cross sections of the aligned scans were created. Point-to-point distances were measured at 5 levels at each cross section. The five levels were: Vertical Marginal Fit (VF), Absolute Marginal Fit (AM), Axio-margin Fit (AMF), Axial Fit (AF) and Occlusal Fit (OF). Results: The results of the volume measurement were summarised as: VM-CoCrMo (62.8mm3 ) > VZax3 (59.4mm3 ) > VCAD (57mm3 ) > VZax4 (56.1mm3 ) > VLS (52.5mm3 ) and were all significantly different (p presented as areas with different colour. No significant differences were observed at the internal aspect of the cervical aspect between all groups of copings. Significant differences (p< M-CoCrMo Internal Occlusal, Internal Axial and External Axial 2 ZAx3 > ZAx4 External Occlusal, External Cervical 3 ZAx3 < ZAx4 Internal Occlusal 4 M-CoCrMo > ZAx4 Internal Occlusal and Internal Axial The mean values of AMF and AF were significantly (p M-CoCrMo and CAD > ZAx4. Only VF of M-CoCrMo was comparable with the CAD Internal Fit. All VF and AM values were within the clinically acceptable fit (120µm). Conclusion: The investigated CAM methods reproduced the CAD accurately at the internal cervical aspect of the copings. However, localised deviations at axial and occlusal aspects of the copings may suggest the need for modifications in these areas prior to fitting and veneering with porcelain. The CAM groups evaluated also showed different levels of Internal Fit thus rejecting the null hypotheses. The novel non-destructive methodologies for CAD/CAM accuracy and internal fit testing presented in this thesis may be a useful evaluation tool for similar applications.

A Virtual Joystick as a Novel Interaction Modality for Surgeon-Computer Interaction During Computer-Assisted Surgical Procedures

Interacting with a computer system in the operating room (OR) can be a frustrating experience for a surgeon, who currently has to verbally delegate to an assistant every computer interaction task. This indirect mode of interaction is time consuming, error prone and can lead to poor usability of OR computer systems. This thesis describes the design and evaluation of a joystick-like device that allows direct surgeon control of the computer in the OR. The device was tested extensively in comparison to a mouse and delegated dictation with seven surgeons, eleven residents, and five graduate students. The device contains no electronic parts, is easy to use, is unobtrusive, has no physical connection to the computer and makes use of an existing tool in the OR. We performed a user study to determine its effectiveness in allowing a user to perform all the tasks they would be expected to perform on an OR computer system during a computer-assisted surgery. Dictation was found to be superior to the joystick in qualitative measures, but the joystick was preferred over dictation in user satisfaction responses. The mouse outperformed both joystick and dictation, but it is not a readily accepted modality in the OR.

An ESL/EFL Computer Assisted Language Instruction (CALIS) Micro-Teaching Lesson on Coherence Through Sentences When Writing Compositions in the Foreign Language Classroom

[Sin resumen]

La pensée mixte : une approche de la composition par l'interaction des pensées instrumentale, électroacoustique et informatique

La « pensée mixte » est une approche de la composition caractérisée par l’interaction de trois pensées: la pensée instrumentale, la pensée électroacoustique et la pensée informatique. Elle prend la forme d’un réseau où le compositeur fait des aller-retours entre les trois pensées et réalise des équivalences paramétriques. La pensée instrumentale se rattache à la tradition de l’écriture occidentale, la pensée électroacoustique fait allusion aux pratiques du studio analogique et de la musique acousmatique, et la pensée informatique fait référence aux pratiques numériques de la programmation visuelle et de l’analyse spectrale. Des lieux communs existent où s’opèrent l’interaction des trois pensées: la notion du studio instrumental de Ivo Malec, la notion de musique concrète instrumentale de Helmut Lachenmann, la composition assistée par ordinateur, la musique spectrale, l’approche instrumentale par montage, la musique acousmatique s’inspirant de la tradition musicale écrite et les musiques mixtes. Ces domaines constituent les influences autour desquelles j’ai composé un corpus de deux cycles d’œuvres: Les Larmes du Scaphandre et le Nano-Cosmos. L’analyse des œuvres met en évidence la notion de « pensée mixte » en abordant la pensée électroacoustique dans ma pratique instrumentale, la pensée informatique dans ma pratique musicale, et la pensée instrumentale dans ma pratique électroacoustique.

La pensée mixte : une approche de la composition par l'interaction des pensées instrumentale, électroacoustique et informatique

La « pensée mixte » est une approche de la composition caractérisée par l’interaction de trois pensées: la pensée instrumentale, la pensée électroacoustique et la pensée informatique. Elle prend la forme d’un réseau où le compositeur fait des aller-retours entre les trois pensées et réalise des équivalences paramétriques. La pensée instrumentale se rattache à la tradition de l’écriture occidentale, la pensée électroacoustique fait allusion aux pratiques du studio analogique et de la musique acousmatique, et la pensée informatique fait référence aux pratiques numériques de la programmation visuelle et de l’analyse spectrale. Des lieux communs existent où s’opèrent l’interaction des trois pensées: la notion du studio instrumental de Ivo Malec, la notion de musique concrète instrumentale de Helmut Lachenmann, la composition assistée par ordinateur, la musique spectrale, l’approche instrumentale par montage, la musique acousmatique s’inspirant de la tradition musicale écrite et les musiques mixtes. Ces domaines constituent les influences autour desquelles j’ai composé un corpus de deux cycles d’œuvres: Les Larmes du Scaphandre et le Nano-Cosmos. L’analyse des œuvres met en évidence la notion de « pensée mixte » en abordant la pensée électroacoustique dans ma pratique instrumentale, la pensée informatique dans ma pratique musicale, et la pensée instrumentale dans ma pratique électroacoustique.

La Métamorphose, un opéra en trois actes Genèse, analyse et formalisation d’une démarche compositionnelle

La version intégrale de cette thèse est disponible uniquement pour consultation individuelle à la Bibliothèque de musique de l’Université de Montréal (www.bib.umontreal.ca/MU).

Deep Decline

Thesis (Ph.D.)--University of Washington, 2016-08

Preliminary assessment of the quantitative relationships between testicular tissue composition and ultrasonographic image attributes in the ram

This study examined the relationships between gross chemical composition and ultrasonographic characteristics of the ram testes. Ten testes from sexually mature Karakul rams were scanned ex situ with an 8-MHz linear-array transducer, in a transverse and longitudinal plane. All ultrasonograms were saved as digital images and subjected to computerized analyses. Crude protein content was determined by the Kjeldahl method, moisture was determined with an oven-drying method, and fat was measured by the Soxhlet extraction of dried samples. Mean pixel values (r = -0.64, P = 0.04), pixel heterogeneity (standard deviation of pixel values; r = -0.64, P = 0.04) and maximum pixel intensity (r = -0.76, P = 0.01) were all negatively correlated with parenchymal protein content. Pixel heterogeneity correlated directly with extractable lipids (r = 0.66, P = 0.02). The quantitative correlations between echotextural and biochemical parameters found in the present experiment confirm the utility of ultrasonographic imaging combined with computer-assisted image analysis for determining changes in testicular histophysiology. © 2013 Elsevier Ltd. All rights reserved.