Power wagon reference book.

Editor: 1919- S.A. Phillips.

The Automobile calendar : recent and pending federal activities affecting motor vehicles.

S/N 052-003-00791-6

Technology assessment of changes in the future use and characteristics of the automobile transportation system.

"OTA-T-84."

Industry wage survey.

Description based on: May 1983.

Industry wage survey.

Latest issue consulted: July 1988.

Aspects of design for a spare parts provisioning system

This thesis describes an investigation by the author into the spares operation of compare BroomWade Ltd. Whilst the complete system, including the warehousing and distribution functions, was investigated, the thesis concentrates on the provisioning aspect of the spares supply problem. Analysis of the historical data showed the presence of significant fluctuations in all the measures of system performance. Two Industrial Dynamics simulation models were developed to study this phenomena. The models showed that any fluctuation in end customer demand would be amplified as it passed through the distributor and warehouse stock control systems. The evidence from the historical data available supported this view of the system's operation. The models were utilised to determine which parts of the total system could be expected to exert a critical influence on its performance. The lead time parameters of the supply sector were found to be critical and further study showed that the manner in which the lead time changed with work in progress levels was also an important factor. The problem therefore resolved into the design of a spares manufacturing system. Which exhibited the appropriate dynamic performance characteristics. The gross level of entity presentation, inherent in the Industrial Dynamics methodology, was found to limit the value of these models in the development of detail design proposals. Accordingly, an interacting job shop simulation package was developed to allow detailed evaluation of organisational factors on the performance characteristics of a manufacturing system. The package was used to develop a design for a pilot spares production unit. The need for a manufacturing system to perform successfully under conditions of fluctuating demand is not limited to the spares field. Thus, although the spares exercise provides an example of the approach, the concepts and techniques developed can be considered to have broad application throughout batch manufacturing industry.

Decision support system for spare parts warehousing

Spare parts warehousing decision-making plays an important role in today's manufacturing industry as it derives an optimum inventory policy for the organizations. Previous research on spare parts warehousing decision-making did not deal with the problem holistically considering all the subjective and objective criteria of operational and strategic needs of the manufacturing companies in the process industry. This study reviews current relevant literature and develops a conceptual framework (an integrated group decision support system) for selecting the most effective warehousing option for the process industry using the analytic hierarchy process (AHP). The framework has been applied to a multinational cement manufacturing company in the UK. Three site visits, eight formal interviews, and several discussions have been undertaken with personnel of the organization, many of which have more than 20 years of experience, in order to apply the proposed decision support system (DSS). Subsequently, the DSS has been validated through a questionnaire survey in order to establish its usefulness, effectiveness for warehousing decision-making, and the possibility of adoption. The proposed DSS is an integrated framework for selecting the best warehousing option for business excellence in any manufacturing organization.

Changing policies for the automotive industry in an 'old' industrial region:an open innovation model for the UK West Midlands?

Automobile manufacture in the UK West Midlands peaked during the 1950s and early 1960s but, with overseas competition, declined thereafter. Successive policies, such as government supported mergers to form the British Motor Corporation in the 1950s, green-field development away from the region in the 1960s, nationalisation of the (then) British Leyland in the 1970s, Japanese FDI in the 1980s and the Rover-centric Accelerate Project in the 1990s have failed to halt the decline. Since early 2000, regional policy has been the responsibility of the Regional Development Agency, Advantage West Midlands. The RDA has moved away from traditional support based on the needs of big companies or ‘champions’ and adopted an approach centred on a mix of small and large businesses and high level research, and – arguably – an ‘open innovation’ model. Here, we examine these new policies and their potential to create an innovative and competitive regional environment.

A conceptual framework for supply chain collaboration:empirical evidence from the agri-food industry

Purpose - The purpose of this paper is to analyse the concept of supply chain collaboration and to provide an overall framework that can be used as a conceptual landmark for further empirical research. In addition, the concept is explored in the context of agri-food industry and particularities are identified. Finally, the paper submits empirical evidence from an exploratory case study in the agri-food industry, at the grower-processor interface, and information regarding the way the concept is actually applied in small medium-sized enterprises (SMEs) is presented. Design/methodology/approach - The paper employed case study research by conducting in-depth interviews in the two companies. Findings - Supply chain collaboration concept is of significant importance for the agri-food industry however, some constraints arise due to the nature of industry's products, and the specific structure of the sector. Subsequently, collaboration in the supply chain is often limited to operational issues and to logistics-related activities. Research limitations/implications - Research is limited to a single case study and further qualitative testing of the conceptual model is needed in order to adjust the model before large scale testing. Practical implications - Case study findings may be transferable to other similar dual relationships at the grower-processor interface. Weaker parts in asymmetric relationships have opportunities to improve their position, altering the dependence balance, by achieving product/process excellence. Originality/value - The paper provides evidence regarding the applicability of the supply chain collaboration concept in the agri-food industry. It takes into consideration not relationships between big multinational companies, but SMEs. © Emerald Group Publishing Limited.

Challenges and opportunities for reverse logistics initiatives in the automotive industry

This paper investigates the main strategies automotive companies adopt to address the issue of dealing with end-of-life vehicles and spare parts. Furthermore, it investigates the reasons behind take-back strategies, i.e how and why automotive companies undertake initiatives in reverse logistics. The research findings indicate that companies are trying to respond to the end-of-life legislation based on cost-effective approaches as well as corporate environmental responsibility. Outsourcing is used when expertise is found to extract value from scrap and there is cooperation with suppliers and vendors to facilitate the dismantling of cars and recycling of parts.

Subtractive and additive manufacturing technology in moulding industry

This report is a review of additive and subtractive manufacturing techniques. This approach (additive manufacturing) has resided largely in the prototyping realm, where the methods of producing complex freeform solid objects directly from a computer model without part-specific tooling or knowledge. But these technologies are evolving steadily and are beginning to encompass related systems of material addition, subtraction, assembly, and insertion of components made by other processes. Furthermore, these various additive processes are starting to evolve into rapid manufacturing techniques for mass-customized products, away from narrowly defined rapid prototyping. Taking this idea far enough down the line, and several years hence, a radical restructuring of manufacturing could take place. Manufacturing itself would move from a resource base to a knowledge base and from mass production of single use products to mass customized, high value, life cycle products, majority of research and development was focused on advanced development of existing technologies by improving processing performance, materials, modelling and simulation tools, and design tools to enable the transition from prototyping to manufacturing of end use parts.

Product quality and compliance in the pharmaceutical industry

This thesis aims to highlight the importance of a Product Quality & Compliance department in a Pharmaceutical Industry, on the good performance of company's activities and the achievement of their goals and mission. Despite the wide activities performed by this Department, the purpose of this work will be completed by describing only some of their reponsibilities. The tasks described are specifically the ones I have been performing throughout my professional experience at Bluepharma - Pharmaceutical Industry, SA, initiated in June 2012 in the Quality Assurance Department until today in the currently named Product Quality & Compliance department. This thesis is structured into 4 parts. The first chapter is an introduction to this thesis, and includes its context and objectives, followed by a brief overview of the state-of-the art in the pharmaceutical industry, including the market environment, the regulatory environment and quality requirements. A small presentation of the company and the department where were and still are developed my professional activity is also made in this chapter. In the following chapter are described the main tasks performed, the complementary activities and key skills acquired throughout this professional experience. A discussion and conclusion is presented at the end, including an analysis of the reported activities, main difficulties encountered its role and importance in the company performance as well as the skills acquired during this work experience.

Terminal defect analysis and classification methodology for automotive industry

The impact of end customer quality complaints with direct relationship with automotive components has presented negative trend at European level for the entire automotive industry. Thus, this research proposal is to concentrate efforts on the most important items of Pareto chart and understand the failure type and the mechanism involved, link and impact of the project and parameters on the process, ending it with the development of one of the company’s most desired tool, that hosted this project – European methodology of terminals defects classification, and listing real opportunities for improvement based on measurement and analysis of actual data. Through the development of terminals defects classification methodology, which is considered a valuable asset to the company, all the other companies of the YAZAKI’s group will be able to characterize terminals as brittle or ductile, in order to put in motion, more efficiently, all the other different existing internal procedures for the safeguarding of the components, improving manufacturing efficiency. Based on a brief observation, nothing can be said in absolute sense, concerning the failure causes. Base materials, project, handling during manufacture and storage, as well as the cold work performed by plastic deformation, all play an important role. However, it was expected that this failure has been due to a combination of factors, in detriment of the existence of a single cause. In order to acquire greater knowledge about this problem, unexplored by the company up to the date of commencement of this study, was conducted a thorough review of existing literature on the subject, real production sites were visited and, of course, the actual parts were tested in lab environment. To answer to many of the major issues raised throughout the investigation, were used extensively some theoretical concepts focused on the literature review, with a view to realizing the relationship existing between the different parameters concerned. Should here be stated that finding technical studies on copper and its alloys is really hard, not being given all the desirable information. This investigation has been performed as a YAZAKI Europe Limited Company project and as a Master Thesis for Instituto Superior de Engenharia do Porto, conducted during 9 months between 2012/2013.

Early stage assessment of the inspectability of welded components : A case from the aerospace industry

This paper proposes a method to indicate potential problems when planning dye penetrant and x-ray inspection of welded components. Inspection has been found to be an important part of the manufacturability evaluation made in a large CAD-based parametric environment for making multidisciplinary design simulations in early stages of design at an aircraft component manufacturer. The paper explains how the proposed method is to be included in the design platform at the company. It predicts the expected probability of detection of cracks (POD) in situations where the geometry of the parts is unfavourable for inspection so that potential problems can be discovered and solved in early stages. It is based on automatically extracting information from CAD-models and making a rule-based evaluation. It also provides a scale for how favourable the geometry is for inspection. In the paper it is also shown that the manufacturability evaluation need to take into consideration the expected stresses in the structures, highlighting the importance of multi-disciplinary simulations.

Trastornos musculoesqueléticos en trabajadores de la industria automotriz: revisión de la literatura 2000 a 2016.

Los trastornos musculoesqueléticos (TME) tienen alta relación con la industria automotriz afectando a los trabajadores en quienes se puede encontrar varias patologías como Síndrome Del Túnel Del Carpo, Epicondilitis, Síndrome del Manguito Rotador, discopatía lumbar y lumbalgias, entre otros. Entre los factores de riesgo asociados a estos trastornos están los movimientos repetitivos, posturas inadecuadas, vibración, uso manual de herramientas, tareas físicas demandantes y el mal levantamiento de pesos. Todas estas patologías son causa de ausentismo laboral en todo el mundo, lo que conlleva a un aumento en el costo económico por incapacidades, ayudas diagnósticas y tratamientos. Se realizó una revisión de la literatura científica de artículos publicados del año 2000 a 2016 con relación a los trastornos musculoesqueléticos en la industria automotriz en las bases de datos de Pubmed, Ebsco Host, ScienceDirect y Embase. La evidencia encontrada sugiere que la patología lumbar es la que presenta mayor prevalencia en la industria, con 65% en la población Europea, 42% en Asia, Norteamérica en un 20% y en América Latina en un 46%. A pesar que en la industria automotriz predominan como fuerza laboral los hombres, se reportó que las mujeres eran las que tenían mayores factores de riesgo para desarrollar un TME y dentro de estos las posturas inadecuadas, movimientos repetitivos, sobrecarga laboral y levantamiento de pesos, sumado al tiempo de exposición que fue un común denominador en cada uno de los estudios analizados. Las conclusiones fueron que la prevalencia de TME en esta industria es elevada y esto amerita la implementación de programas de prevención más enfocados en este tema. Además no se encontró en la literatura la existencia de un método eficiente para análisis postural y de sobrecarga física, lo que habla de una necesidad urgente de realizar más investigaciones enfocadas en este tipo de población.