898 resultados para Antero- and retrograde labeling
Resumo:
The absorption and metabolism of dietary nucleic acids have received less attention than those of other organic nutrients, largely because of methodological difficulties. We supplemented the rations of poultry and mice with the edible alga Spirulina platensis, which had been uniformly labeled with 13C by hydroponic culture in 13CO2. The rations were ingested by a hen for 4 wk and by four mice for 6 days; two mice were fed a normal diet and two were fed a nucleic acid-deficient diet. The animals were killed and nucleosides were isolated from hepatic RNA. The isotopic enrichment of all mass isotopomers of the nucleosides was analyzed by selected ion monitoring of the negative chemical ionization mass spectrum and the labeling pattern was deconvoluted by reference to the enrichment pattern of the tracer material. We found a distinct difference in the 13C enrichment pattern between pyrimidine and purine nucleosides; the isotopic enrichment of uniformly labeled [M + 9] isotopomers of pyrimidines exceeded that of purines [M + 10] by > 2 orders of magnitude in the avian nucleic acids and by 7- and 14-fold in the murine nucleic acids. The purines were more enriched in lower mass isotopomers, those less than [M + 3], than the pyrimidines. Our results suggest that large quantities of dietary pyrimidine nucleosides and almost no dietary purine nucleosides are incorporated into hepatic nucleic acids without hydrolytic removal of the ribose moiety. In addition, our results support a potential nutritional role for nucleosides and suggest that pyrimidines are conditionally essential organic nutrients.
Resumo:
We have investigated a light-conditional mutant of Chlamydomonas reinhardtii (J12) that is unable to synthesize chlorophyll in the dark with the aim of characterizing the mitochondrial membrane polypeptides of this alga. A crude membrane fraction derived from etiolated cells was analyzed by gel electrophoresis, immunoblot analysis, and pulse-labeling in the presence of specific protein synthesis inhibitors. This fraction contained both mitochondrial and etioplast membranes, and the latter contained appreciable amounts of subunits of the cytochrome b6f complex. The mitochondria-encoded subunit 1 of cytochrome-c oxidase called COX1 was identified, and its synthesis was detected in this membrane fraction. The redox-difference spectra of mitochondrial cytochromes were studied in whole cells and membrane fractions, in both respiratory-competent and -deficient strains. Mitochondrial membranes could be further purified after sucrose gradient centrifugation. The use of etiolated cells and their membrane extracts, in association with appropriate methodologies, opens ways to study the molecular genetics of mitochondria in C. reinhardtii and allows us to address the question of the cooperation established between the three genetic compartments of a plant cell.
Resumo:
OBJETIVO: Analizar la opinión que los usuarios tienen sobre alimentos genéticamente modificados y su información en el etiquetado. MÉTODOS: Realizada revisión sistemática de la literatura científica sobre los alimentos transgénicos y el etiquetado a partir de la consulta de las bases de datos bibliográficas: Medline (vía PubMed), EMBASE, ISIWeb of Knowledge, Cochrane Library Plus, FSTA, LILACS, CINAHL y AGRICOLA. Los descriptores seleccionados fueron: «organisms, genetically modified» y «food labeling». La búsqueda se realizó desde la primera fecha disponible hasta junio de 2012, seleccionando los artículos pertinentes escritos en inglés, portugués y castellano. RESULTADOS: Se seleccionaron 40 artículos. En todos ellos, se debía haber realizado una intervención poblacional enfocada al conocimiento de los consumidores sobre los alimentos genéticamente modificados y su necesidad, o no, de incluir información en el etiquetado. El consumidor expresa su preferencia por el producto no-genéticamente modificado, y apunta que está dispuesto a pagar algo más por él, pero, en definitiva compra el artículo que está a mejor precio en un mercado que acoge las nuevas tecnologías. En 18 artículos la población se mostraba favorable a su etiquetado obligatorio y seis al etiquetado voluntario; siete trabajos demostraban el poco conocimiento de la población sobre los transgénicos y, en tres, la población subestimó la cantidad que consumía. En todo caso, se observó la influencia del precio del producto genéticamente modificado. CONCLUSIONES: La etiqueta debe ser homogénea y aclarar el grado de tolerancia en humanos de alimentos genéticamente modificados en comparación con los no modificados. Asimismo, debe dejar claro su composición, o no, de alimento genéticamente modificado y la forma de producción de estos artículos de consumo. La etiqueta también debe ir acompañada de un sello de certificación de una agencia del estado y datos para contacto. El consumidor expresa su preferencia por el producto no-genéticamente modificado pero señaló que acaba comprando el artículo que está a mejor precio en un mercado que acoge las nuevas tecnologías.
Resumo:
A quantitative model of development of magmatic and ore-magmatic systems under crests of mid-ocean ridges is constructed. Correct physical models of melting zone formation in approximation to active spreading, non-stationary dynamics of magma intrusion from a center of generation, filling of magma chambers of various shapes, feeding of fissure-type volcanoes, and retrograde boiling of melts during solidification of intrusive bodies beneath axial zones of spreading in crests of ridges are proposed. Physicochemical and mathematical theories of disintegration of multi-component solutions, growth of liquational drops of ore melts, and sublimation of components from magmatic gases are elaborated. Methods for constructing physically correct models of heat and mass transfer in heterophase media are devised. Modeling of development of magmatic and ore-magmatic systems on the basis of the Usov-Kuznetsov facies method and the Pospelov system approach are advanced. For quantitative models numerical circuits are developed and numerical experiments are carried out.
Resumo:
J.L., then a 25-year-old physiotherapist, became densely amnesic following herpes simplex encephalitis. She displayed severe retrograde amnesia, category-specific semantic memory loss, and a profound anterograde amnesia affecting both verbal and visual memory. Her working memory systems were relatively spared as were most of her cognitive problem-solving abilities, but her social functioning was grossly impaired. She was able to demonstrate several previously learned physiotherapy skills, but was unable to modify her application of these procedures in accordance with patient response. She showed no memory of theoretical or propositional knowledge, and could neither plan treatment or reason clinically. Three years later, J.L. had profound impairment of anterograde and retrograde declarative memory, with relative sparing of working memory for problem solving and long-term memory of procedural skills. The theoretical and practical implications of her amnesic syndrome are discussed.
Resumo:
The mouth, throat, and face contain numerous muscles that participate in a large variety of orofacial behaviors. The jaw and tongue can move independently, and thus require a high degree of coordination among the muscles that move them to prevent self-injury. However, different orofacial behaviors require distinct patterns of coordination between these muscles. The method through which motor control circuitry might coordinate this activity has yet to be determined. Electrophysiological, immunohistochemical, and retrograde tracing studies have attempted to identify populations of premotor neurons which directly send information to orofacial motoneurons in an effort to identify sources of coordination. Yet these studies have not provided a complete picture of the population of neurons which monosynaptically connect to jaw and tongue motoneurons. Additionally, while many of these studies have suggested that premotor neurons projecting to multiple motor pools may play a role in coordination of orofacial muscles, no clear functional roles for these neurons in the coordination of natural orofacial movements has been identified.
In this dissertation, I took advantage of the recently developed monosynaptic rabies virus to trace the premotor circuits for the jaw-closing masseter muscle and tongue-protruding genioglossus muscle in the neonatal mouse, uncovering novel premotor inputs in the brainstem. Furthermore, these studies identified a set of neurons which form boutons onto motor neurons in multiple motor pools, providing a premotor substrate for orofacial coordination. I then combined a retrogradely traveling lentivirus with a split-intein mediated split-Cre recombinase system to isolate and manipulate a population of neurons which project to both left and right jaw-closing motor nuclei. I found that these bilaterally projecting neurons also innervate multiple other orofacial motor nuclei, premotor regions, and midbrain regions implicated in motor control. I anatomically and physiologically characterized these neurons and used optogenetic and chemicogenetic approaches to assess their role in natural jaw-closing behavior, specifically with reference to bilateral masseter muscle electromyogram (EMG) activity. These studies identified a population of bilaterally projecting neurons in the supratrigeminal nucleus as essential for maintenance of an appropriate level of masseter activation during natural chewing behavior in the freely moving mouse. Moreover, these studies uncovered two distinct roles of supratrigeminal bilaterally projecting neurons in bilaterally synchronized activation of masseter muscles, and active balancing of bilateral masseter muscle tone against an excitatory input. Together, these studies identify neurons which project to multiple motor nuclei as a mechanism by which the brain coordinates orofacial muscles during natural behavior.
Resumo:
The goal of this work is to present an efficient CAD-based adjoint process chain for calculating parametric sensitivities (derivatives of the objective function with respect to the CAD parameters) in timescales acceptable for industrial design processes. The idea is based on linking parametric design velocities (geometric sensitivities computed from the CAD model) with adjoint surface sensitivities. A CAD-based design velocity computation method has been implemented based on distances between discrete representations of perturbed geometries. This approach differs from other methods due to the fact that it works with existing commercial CAD packages (unlike most analytical approaches) and it can cope with the changes in CAD model topology and face labeling. Use of the proposed method allows computation of parametric sensitivities using adjoint data at a computational cost which scales with the number of objective functions being considered, while it is essentially independent of the number of design variables. The gradient computation is demonstrated on test cases for a Nozzle Guide Vane (NGV) model and a Turbine Rotor Blade model. The results are validated against finite difference values and good agreement is shown. This gradient information can be passed to an optimization algorithm, which will use it to update the CAD model parameters.
Resumo:
Normal grain growth of calcite was investigated by combining grain size analysis of calcite across the contact aureole of the Adamello pluton, and grain growth modeling based on a thermal model of the surroundings of the pluton. In an unbiased model system, i.e., location dependent variations in temperature-time path, 2/3 and 1/3 of grain growth occurs during pro- and retrograde metamorphism at all locations, respectively. In contrast to this idealized situation, in the field example three groups can be distinguished, which are characterized by variations in their grain size versus temperature relationships: Group I occurs at low temperatures and the grain size remains constant because nano-scale second phase particles of organic origin inhibit grain growth in the calcite aggregates under these conditions. In the presence of an aqueous fluid, these second phases decay at a temperature of about 350 °C enabling the onset of grain growth in calcite. In the following growth period, fluid-enhanced group II and slower group III growth occurs. For group II a continuous and intense grain size increase with T is typical while the grain growth decreases with T for group III. None of the observed trends correlate with experimentally based grain growth kinetics, probably due to differences between nature and experiment which have not yet been investigated (e.g., porosity, second phases). Therefore, grain growth modeling was used to iteratively improve the correlation between measured and modeled grain sizes by optimizing activation energy (Q), pre-exponential factor (k0) and grain size exponent (n). For n=2, Q of 350 kJ/mol, k0 of 1.7×1021 μmns−1 and Q of 35 kJ/mol, k0 of 2.5×10-5 μmns−1 were obtained for group II and III, respectively. With respect to future work, field-data based grain growth modeling might be a promising tool for investigating the influences of secondary effects like porosity and second phases on grain growth in nature, and to unravel differences between nature and experiment.
Resumo:
Introdução: O presente trabalho tem como tema Microcirurgia Endodôntica sendo esta um tipo de Retratamento Endodôntico Cirúrgico (RTEC). Este tipo de procedimento está indicado em casos de insucesso prévio no Tratamento Endodôntico Não Cirúrgico (TENC). Embora atualmente os índices de sucesso do TENC sejam elevados, existem ainda alguns casos, que não atingem os resultados desejados mesmo realizando corretamente todas as etapas do tratamento. Quando assim é, há necessidade de abordar o sistema de canais radiculares por outra via: recorrer à cirurgia endodôntica e à obturação retrógrada. Objetivos: Esta dissertação tem como objetivo principal abordar uma técnica de Retratamento Endodôntico Cirúrgico: a Microcirurgia Endodôntica. Procedeu-se a uma revisão bibliográfica, analisando literatura que versa o tema, a evolução da técnica, o protocolo cirúrgico em toda a sua extensão, a sua utilidade e aplicabilidade na prática clínica. Materiais e métodos: Na execução desta revisão bibliográfica, os motores de pesquisa on-line utilizados foram os seguintes: b-On, Pubmed, Scielo, Science Direct e Google Académico. Os critérios de inclusão limitaram o uso de artigos publicados entre 2000 e 2016 e nos idiomas de português, inglês e espanhol. Os critérios de exclusão rejeitaram artigos dos quais o teor não teria relevância para a concretização do trabalho e artigos fora dos limites temporais. Conclusão: Na literatura científica, quando a técnica Microcirurgica é comparada com a técnica convencional de RTEC mostra uma taxa de sucesso de excelência e que maioritariamente, os autores defendem que esta deverá ser usada apenas como retratamento, e não isoladamente ou como primeira abordagem terapêutica. Nas últimas décadas, o crescente desenvolvimento científico e tecnológico da cirurgia endodôntica leva à introdução da microcirurgia graças ao recurso da magnificação e iluminação, instrumentos adaptados à nova realidade da cirurgia endodôntica, novos equipamentos e novos materiais associados à retrobturação. É de salientar que este processo cirúrgico é menos invasivo para o paciente e que se obtém um aumento das taxas de sucesso.
Resumo:
"Con la implementación estandarizada de la ecografía uretral se pretende tener un efecto directo en el diagnóstico oportuno, no invasivo y sin complicaciones inherentes a la instrumentación del tracto urinario bajo en los pacientes que padecen de estenosis uretral; que finalmente redundará en disminución de costos a corto y largo plazo gracias a la eliminación de estudios innecesarios y procedimientos terapéuticos infructuosos, beneficiando al paciente y al sistema de salud vigente en nuestro medio. Los sujetos con estenosis uretrales complejas podrían ser diagnosticados de manera rápida, sencilla y minimamente invasiva sin importar la localización de la anomalía y su complejidad". (Extracto de la introducción)
Resumo:
STUDY DESIGN: The twy/twy mouse undergoes spontaneous chronic mechanical compression of the spinal cord; this in vivo model system was used to examine the effects of retrograde adenovirus (adenoviral vector [AdV])-mediated brain-derived neurotrophic factor (BDNF) gene delivery to spinal neural cells. OBJECTIVE: To investigate the targeting and potential neuroprotective effect of retrograde AdV-mediated BDNF gene transfection in the chronically compressed spinal cord in terms of prevention of apoptosis of neurons and oligodendrocytes. SUMMARY OF BACKGROUND DATA: Several studies have investigated the neuroprotective effects of neurotrophins, including BDNF, in spinal cord injury. However, no report has described the effects of retrograde neurotrophic factor gene delivery in compressed spinal cords, including gene targeting and the potential to prevent neural cell apoptosis. METHODS: AdV-BDNF or AdV-LacZ (as a control gene) was injected into the bilateral sternomastoid muscles of 18-week old twy/twy mice for retrograde gene delivery via the spinal accessory motor neurons. Heterozygous Institute of Cancer Research mice (+/twy), which do not undergo spontaneous spinal compression, were used as a control for the effects of such compression on gene delivery. The localization and cell specificity of ß-galactosidase expression (produced by LacZ gene transfection) and BDNF expression in the spinal cord were examined by coimmunofluorescence staining for neural cell markers (NeuN, neurons; reactive immunology protein, oligodendrocytes; glial fibrillary acidic protein, astrocytes; OX-42, microglia) 4 weeks after gene injection. The possible neuroprotection afforded by retrograde AdV-BDNF gene delivery versus AdV-LacZ-transfected control mice was assessed by scoring the prevalence of apoptotic cells (terminal deoxynucleotidyl transferase-mediated dUTP-biotin nick end labeling-positive cells) and immunoreactivity to active caspases -3, -8, and -9, p75, neurofilament 200 kD (NF), and for the oligodendroglial progenitor marker, NG2. RESULTS.: Four weeks after injection, the retrograde delivery of the LacZ marker gene was identified in cervical spinal neurons and some glial cells, including oligodendrocytes in the white matter of the spinal cord, in both the twy/twy mouse and the heterozygous Institute of Cancer Research mouse (+/twy). In the compressed spinal cord of twy/twy mouse, AdV-BDNF gene transfection resulted in a significant decrease in the number of terminal deoxynucleotidyl transferase-mediated dUTP-biotin nick end labeling-positive cells present in the spinal cord and a downregulation in the caspase apoptotic pathway compared with AdV-LacZ (control) gene transfection. There was a marked and significant increase in the areas of the spinal cord of AdV-BDNF-injected mice that were NF- and NG2-immunopositive compared with AdV-LacZ-injected mice, indicating the increased presence of neurons and oligodendrocytes in response to BDNF transfection. CONCLUSION: Our results demonstrate that targeted retrograde BDNF gene delivery suppresses apoptosis in neurons and oligodendrocytes in the chronically compressed spinal cord of twy/twy mouse. Further work is required to establish whether this method of gene delivery may provide neuroprotective effects in other situations of compressive spinal cord injury.
Resumo:
Previous behavioral studies reported a robust effect of increased naming latencies when objects to be named were blocked within semantic category, compared to items blocked between category. This semantic context effect has been attributed to various mechanisms including inhibition or excitation of lexico-semantic representations and incremental learning of associations between semantic features and names, and is hypothesized to increase demands on verbal self-monitoring during speech production. Objects within categories also share many visual structural features, introducing a potential confound when interpreting the level at which the context effect might occur. Consistent with previous findings, we report a significant increase in response latencies when naming categorically related objects within blocks, an effect associated with increased perfusion fMRI signal bilaterally in the hippocampus and in the left middle to posterior superior temporal cortex. No perfusion changes were observed in the middle section of the left middle temporal cortex, a region associated with retrieval of lexical-semantic information in previous object naming studies. Although a manipulation of visual feature similarity did not influence naming latencies, we observed perfusion increases in the perirhinal cortex for naming objects with similar visual features that interacted with the semantic context in which objects were named. These results provide support for the view that the semantic context effect in object naming occurs due to an incremental learning mechanism, and involves increased demands on verbal self-monitoring.
Resumo:
Clustering is an important technique in organising and categorising web scale documents. The main challenges faced in clustering the billions of documents available on the web are the processing power required and the sheer size of the datasets available. More importantly, it is nigh impossible to generate the labels for a general web document collection containing billions of documents and a vast taxonomy of topics. However, document clusters are most commonly evaluated by comparison to a ground truth set of labels for documents. This paper presents a clustering and labeling solution where the Wikipedia is clustered and hundreds of millions of web documents in ClueWeb12 are mapped on to those clusters. This solution is based on the assumption that the Wikipedia contains such a wide range of diverse topics that it represents a small scale web. We found that it was possible to perform the web scale document clustering and labeling process on one desktop computer under a couple of days for the Wikipedia clustering solution containing about 1000 clusters. It takes longer to execute a solution with finer granularity clusters such as 10,000 or 50,000. These results were evaluated using a set of external data.
Resumo:
Reviews and synthesizes evidence to produce evidence-based recommendations on policy actions to improve food labeling for NSW Health