Causal factors of hot air ballooning incidents : identification, frequency, and potential impact

Background: Hot air ballooning incidents are relatively rare, however, when they do occur they are likely to result in a fatality or serious injury. Human error is commonly attributed as the cause of hot air ballooning incidents; however, error in itself is not an explanation for safety failures. This research aims to identify, and establish the relative importance of factors contributing towards hot air ballooning incidents. Methods: Twenty-two Australian Ballooning Federation (ABF) incident reports were thematically coded using a bottom up approach to identify causal factors. Subsequently, 69 balloonists (mean 19.51 years’ experience) participated in a survey to identify additional causal factors and rate (out of seven) the perceived frequency and potential impact to ballooning operations of each of the previously identified causal factors. Perceived associated risk was calculated by multiplying mean perceived frequency and impact ratings. Results: Incident report coding identified 54 causal factors within nine higher level areas: Attributes, Crew resource management, Equipment, Errors, Instructors, Organisational, Physical Environment, Regulatory body and Violations. Overall, ‘weather’, ‘inexperience’ and ‘poor/inappropriate decisions’ were rated as having greatest perceived associated risk. Discussion: Although errors were nominated as a prominent cause of hot air ballooning incidents, physical environment and personal attributes are also particularly important for safe hot air ballooning operations. In identifying a range of causal factors the areas of weakness surrounding ballooning operations have been defined; it is hoped that targeted safety and training strategies can now be put into place removing these contributing factors and reducing the chance of pilot error.

Hybrid chalcogenide nanoparticles : 2D-WS2 nanocrystals inside nested WS2 fullerenes

The MOCVD assisted formation of nested WS2 inorganic fullerenes (IF-WS2) was performed by enhancing surface diffusion with iodine, and fullerene growth was monitored by taking TEM snapshots of intermediate products. The internal structure of the core-shell nanoparticles was studied using scanning electron microscopy (SEM) after cross-cutting with a focused ion beam (FIB). Lamellar reaction intermediates were found occluded in the fullerene particles. In contrast to carbon fullerenes, layered metal chalcogenides prefer the formation of planar, plate-like structures where the dangling bonds at the edges are stabilized by excess S atoms. The effects of the reaction and annealing temperatures on the composition and morphology of the final product were investigated, and the strength of the WS2 shell was measured by intermittent contact-mode AFM. The encapsulated lamellar structures inside the hollow spheres may lead to enhanced tribological activities.

Pedestrian-cyclist interactions at bus stops along segregated bike paths : a case study of Montreal

Safety is one of the major world health issues, and is even more acute for “vulnerable” road users, pedestrians and cyclists. At the same time, public authorities are promoting the active modes of transportation that involve these very users for their health benefits. It is therefore important to understand the factors and designs that provide the best safety for vulnerable road users and encourage more people to use these modes. Qualitative and quantitative shortcomings of collisions make it necessary to use surrogate measures of safety in studying these modes. Some interactions without a collision such as conflicts can be good surrogates of collisions as they are more frequent and less costly. To overcome subjectivity and reliability challenges, automatic conflict analysis using video cameras and deriving users’ trajectories is a solution to overcome shortcomings of manual conflict analysis. The goal of this paper is to identify and characterize various interactions between cyclists and pedestrians at bus stops along bike paths using a fully automated process. Three conflict severity indicators are calculated and adapted to the situation of interest to capture those interactions. A microscopic analysis of users’ behavior is proposed to explain interactions more precisely. Eventually, the study aims to show the capability of automatically collecting and analyzing data for pedestrian-cyclist interactions at bus stops along segregated bike paths in order to better understand the actual and perceived risks of these facilities.

Reducing workplace safety incidents : bridging the gap between safety culture theory and practice

This thesis explored safety culture in a large Australasian construction and mining organisation, with a view to understanding how theory and practice can be integrated to improve safety culture and related outcomes within the industry. The research comprised three studies that investigated the relationship between safety culture, safety motivation, leadership and safety behaviour, and examined differences in perceptions of safety culture across the organisation. Research methodologies and samples included a modified Delphi method with safety leaders (n=41), a quantitative survey with a cross-section of the organisation (n=2,957), and group interviews with frontline supervisors and workers (n=29).

Professional learning from the inside - teachers as agents of school improvement: a principal's case study

This study considered the relationship between professional learning, teacher agency and school improvement. Specifically, it explored the principal's role in supporting teacher agency in their professional learning. It found that, with appropriate pressure and support from principals, school improvement for the betterment of student learning is attainable through teacher professional learning that is based 'within' a school. Particularly, it ascertained that schools need to give greater attention to the allocation of time for teacher professional learning, specifically: time before, during and after professional learning activities. Privileging time efficiently and effectively, heightens teacher agency in their learning.

Inside the ‘Hurt Locker’: The combined effects of explosive ordnance disposal and chemical protective clothing on physiological tolerance time in extreme environments

Background Explosive ordnance disposal (EOD) technicians are often required to wear specialised clothing combinations that not only protect against the risk of explosion but also potential chemical contamination. This heavy (>35kg) and encapsulating ensemble is likely to increase physiological strain by increasing metabolic heat production and impairing heat dissipation. This study investigated the physiological tolerance times of two different chemical protective undergarments, commonly worn with EOD personal protective clothing, in a range of simulated environmental extremes and work intensities Methods Seven males performed eighteen trials wearing two ensembles. The trials involved walking on a treadmill at 2.5, 4 and 5.5 km.h-1 at each of the following environmental conditions, 21, 30 and 37°C wet bulb globe temperature (WBGT). The trials were ceased if the participants’ core temperature reached 39°C, if heart rate exceeded 90% of maximum, if walking time reached 60 minutes or due to volitional fatigue. Results Physiological tolerance times ranged from 8 to 60 min and the duration (mean difference: 2.78 min, P>0.05) were similar in both ensembles. A significant effect for environment (21>30>37°C WBGT, P<0.05) and work intensity (2.5>4>5.5 km.h-1, P< 0.05) was observed in tolerance time. The majority of trials across both ensembles (101/126; 80.1%) were terminated due to participants achieving a heart rate equivalent to greater than 90% of their maximum. Conclusions Physiological tolerance times wearing these two chemical protective undergarments, worn underneath EOD personal protective clothing, were similar and predominantly limited by cardiovascular strain.

Learning the learning rate for prediction with expert advice

Most standard algorithms for prediction with expert advice depend on a parameter called the learning rate. This learning rate needs to be large enough to fit the data well, but small enough to prevent overfitting. For the exponential weights algorithm, a sequence of prior work has established theoretical guarantees for higher and higher data-dependent tunings of the learning rate, which allow for increasingly aggressive learning. But in practice such theoretical tunings often still perform worse (as measured by their regret) than ad hoc tuning with an even higher learning rate. To close the gap between theory and practice we introduce an approach to learn the learning rate. Up to a factor that is at most (poly)logarithmic in the number of experts and the inverse of the learning rate, our method performs as well as if we would know the empirically best learning rate from a large range that includes both conservative small values and values that are much higher than those for which formal guarantees were previously available. Our method employs a grid of learning rates, yet runs in linear time regardless of the size of the grid.

Interrogating Creative Theory and Creative Work: Inside the Games Studio

The expansion of creative and cultural industries has provided a rich source for theoretical claims and commentary. Much of this reproduces and extends the idea that autonomy is the defining feature of both enterprises and workers. Drawing on evidence from research into Australian development studios in the global digital games industry, the article interrogates claims concerning autonomy and related issues of insecurity and intensity, skill and specialisation, work–play boundaries, identity and attachments. In seeking to reconnect changes in creative labour to the wider production environment and political economy, an argument is advanced that autonomy is deeply contextual and contested as a dimension of the processes of capturing value for firms and workers.

Hearing parties' voices in Coordinated Family Dispute Resolution (CFDR) : An Australian pilot of a family mediation model designed for matters involving a history of domestic violence

This paper discusses the Coordinated Family Dispute Resolution (family mediation) process piloted in Australia in 2010–2012. This process was evaluated by the Australian Institute of Family Studies as being ‘at the cutting edge of family law practice’ because it involves the conscious application of mediation where there has been a history of family violence, in a clinically collaborative multidisciplinary and multi-agency setting. The Australian government’s failure to invest resources in the ongoing funding of this model jeopardises the safety and efficacy of family dispute resolution practice in family violence contexts, and compromises the hearing of the voices of family violence victims and their children.

A matter of style? Driver attributional 'style' in accounting for the driving of others as protective or as predisposing drivers towards retaliatory aggressive driving

Driver cognitions about aggressive driving of others are potentially important to the development of evidence-based interventions. Previous research has suggested that perceptions that other drivers are intentionally aggressive may influence recipient driver anger and subsequent aggressive responses. Accordingly, recent research on aggressive driving has attempted to distinguish between intentional and unintentional motives in relation to problem driving behaviours. This study assessed driver cognitive responses to common potentially provocative hypothetical driving scenarios to explore the role of attributions in driver aggression. A convenience sample of 315 general drivers 16–64 yrs (M = 34) completed a survey measuring trait aggression (Aggression Questionnaire AQ), driving anger (Driving Anger Scale, DAS), and a proxy measure of aggressive driving behaviour (Australian Propensity for Angry Driving AusPADS). Purpose designed items asked for drivers’ ‘most likely’ thought in response to AusPADS scenarios. Response options were equivalent to causal attributions about the other driver. Patterns in endorsements of attribution responses to the scenarios suggested that drivers tended to adopt a particular perception of the driving of others regardless of the depicted circumstances: a driving attributional style. No gender or age differences were found for attributional style. Significant differences were detected between attributional styles for driving anger and endorsement of aggressive responses to driving situations. Drivers who attributed the on-road event to the other being an incompetent or dangerous driver had significantly higher driving anger scores and endorsed significantly more aggressive driving responses than those drivers who attributed other driver’s behaviour to mistakes. In contrast, drivers who gave others the ‘benefit of the doubt’ endorsed significantly less aggressive driving responses than either of these other two groups, suggesting that this style is protective.

Brief report regarding past fatigue incidents that have occurred at various BM Alliance Coal Operations mines in Queensland. Report to BM Alliance Coal Operation

This document has arisen from a request from BM Alliance Coal Operations Pty Ltd, to undertake and report on the key findings and statistics, key learning’s and recommendations for fatigue related incidents that have occurred at various BM Alliance coal operation mines in Queensland.

Brief report regarding past vehicle rollover and loss of traction incidents that have occurred at various BM Alliance Coal Operation mines in Queensland. Report to BM Alliance Coal Operation

This document has arisen from a request from BM Alliance Coal Operations Pty Ltd, to undertake and report on the key findings and statistics, key learning’s and recommendations for vehicle rollover and loss of traction (skid) incidents that have occurred at various BM Alliance coal operation mines in Queensland.

Quality assurance of assessment and moderation discourses involving sessional staff

Quality assurance is a major agenda in tertiary education. The casualisation of academic work, especially in teaching, is also a quality assurance issue. Casual or sessional staff members teach and assess more than 50% of all university courses in Australia, and yet the research in relation to the role sessional staff play in quality assurance of student assessment outcomes is scarce. Moderation processes are a pivotal part of robust quality assurance measures. Drawing upon previous work surrounding four discourses of moderation, this pilot project reports the results of research into the role and impact of sessional staff in moderation processes at tertiary level. Qualitative data were gathered through focus interviews. Results, in the form of various moderation discourses, indicate that sessional staff impact the formal quality assurance processes in numerous ways.

International regulation of large-scale land acquisition involving foreign entities

Outlines some of the potential risks or actual harms that result from large-scale land leases or acquisitions and the relevant human rights and environmental law principles.