SiC Multilayer Structures as Light Controlled Photonic Active Filters

Tunable wavelength division multiplexing converters based on amorphous SiC multilayer photonic active filters are analyzed. The configuration includes two stacked p-i-n structures (p(a-SiC:H)-i'(a-SiC:H)-n(a-SiC:H)-p(a-SiC:H)-i(a-Si:H)-n(a-Si:H)) sandwiched between two transparent contacts. The manipulation of the magnitude is achieved through appropriated front and back backgrounds. Transfer function characteristics are studied both theoretically and experimentally. An algorithm to decode the multiplex signal is established. An optoelectronic model supports the optoelectronic logic architecture. Results show that the light-activated device combines the demultiplexing operation with the simultaneous photodetection and self-amplification of an optical signal. The output waveform presents a nonlinear amplitude-dependent response to the wavelengths of the input channels. Depending on the wavelength of the external background and irradiation side, it acts either as a short- or a long-pass band filter or as a band-stop filter. A two-stage active circuit is presented and gives insight into the physics of the device.

a-SiCH Based Devices as Optical Demultiplexers

In this paper we present results on the use of a multilayered a-SiC:H heterostructure as a wavelength-division demultiplexing device (WDM) for the visible light spectrum. The WDM device is a glass/ITO/a-SiC:H (p-i-n)/ a-SiC:H(-p) /Si:H(-i)/SiC:H (-n)/ITO heterostructure in which the generated photocurrent at different values of the applied bias can be assigned to the different optical signals. The device was characterized through spectral response measurements, under different electrical bias. Demonstration of the device functionality for WDM applications was done with three different input channels covering wavelengths within the visible range. The recovery of the input channels is explained using the photocurrent spectral dependence on the applied voltage. The influence of the optical power density was also analysed. An electrical model, supported by a numerical simulation explains the device operation. Short range optical communications constitute the major application field, however other applications are also foreseen.

Denoising of LSFCM images with compensation for the photoblinking/photobleaching effects

Fluorescence confocal microscopy images present a low signal to noise ratio and a time intensity decay due to the so called photoblinking and photobleaching effects. These effects, together with the Poisson multiplicative noise that corrupts the images, make long time biological observation processes very difficult.

Simulation of the magnetic induction vector of a magnetic core to be used in FFC NMR relaxometry

This paper is a contribution for the assessment and comparison of magnet properties based on magnetic field characteristics particularly concerning the magnetic induction uniformity in the air gaps. For this aim, a solver was developed and implemented to determine the magnetic field of a magnetic core to be used in Fast Field Cycling (FFC) Nuclear Magnetic Resonance (NMR) relaxometry. The electromagnetic field computation is based on a 2D finite-element method (FEM) using both the scalar and the vector potential formulation. Results for the magnetic field lines and the magnetic induction vector in the air gap are presented. The target magnetic induction is 0.2 T, which is a typical requirement of the FFC NMR technique, which can be achieved with a magnetic core based on permanent magnets or coils. In addition, this application requires high magnetic induction uniformity. To achieve this goal, a solution including superconducting pieces is analyzed. Results are compared with a different FEM program.

Experimental measuring procedure for the friction torque in rolling bearings

The reduction of the power loss generated in mechanical transmissions and the use of low friction biodegradable lubricants has been attracting considerable attention in recent times. Therefore, it is necessary to develop methods to test and evaluate the performance of such lubricants and compare them with conventional ones. In this sense, a Four-Ball Machine was modified allowing the test of rolling bearings. A 51107 thrust ball bearing was used to test two different greases and the corresponding base oils. Friction torque and operating temperatures were continuously monitored to quantify the power loss and the heat evacuation for each lubricant tested. Copyright © 2010 John Wiley & Sons, Ltd.

Arithmetic-based binary-to-RNS converter modulo {2(n)+/- k} for jn-Bit dynamic range

In this brief, a read-only-memoryless structure for binary-to-residue number system (RNS) conversion modulo {2(n) +/- k} is proposed. This structure is based only on adders and constant multipliers. This brief is motivated by the existing {2(n) +/- k} binary-to-RNS converters, which are particular inefficient for larger values of n. The experimental results obtained for 4n and 8n bits of dynamic range suggest that the proposed conversion structures are able to significantly improve the forward conversion efficiency, with an AT metric improvement above 100%, regarding the related state of the art. Delay improvements of 2.17 times with only 5% area increase can be achieved if a proper selection of the {2(n) +/- k} moduli is performed.

Sexualidade no Terceiro Trimestre de Gravidez

Objectivos: Descrever a experiência sexual feminina no terceiro trimestre de gravidez. Tipo de estudo: Estudo descritivo transversal. Local: Consulta de Referência da Maternidade Dr. Alfredo da Costa – Lisboa, Portugal. População: Amostra de conveniência de cem mulheres com gravidez de baixo risco, que não tinham restrições médicas na sua actividade sexual. Métodos: As participantes completaram voluntariamente e em anonimato um questionário elaborado pelos autores respeitante a dados demográficos, história obstétrica, relacionamento sexual e esclarecimento/mitos sobre a sexualidade durante o último mês de gravidez. Resultados: A maioria das grávidas refere diminuição da actividade sexual após engravidar, embora mantenha relações sexuais uma ou mais vezes por semana e coito vaginal no terceiro trimestre, sem mudanças significativas para outros tipos de comportamento. Os factores que influenciam a redução da actividade sexual no terceiro trimestre são a diminuição do desejo, dispareunia e cansaço físico. Os mitos, crenças religiosas, nível de educação e dificuldade na informação sentida também parecem contribuir para a redução da actividade sexual. Frequentemente as grávidas indicam que o parceiro tem medo de prejudicar o bebé. Poucas mulheres obtiveram informação através dos profissionais de saúde sobre este tópico e consideram que gostariam de ter sido mais bem esclarecidas pelos mesmos. Conclusões: Os autores acreditam que na maioria dos casos a gravidez não provoca uma ruptura na sexualidade de um casal se esta era previamente satisfatória. No entanto, consideram importante a abordagem deste tema com a grávida por parte dos profissionais de saúde.

Uma amarra ao mar e outra à terra. Cristãos-novos no Algarve (1558-1650)

Tese apresentada para cumprimento dos requisitos necessários à obtenção do grau de Doutor em História Económica e Social Moderna

A Carreira da Índia e o corso neerlandês 1595-1625

Tese de mestrado , História dos Descobrimentos e da Expansão Portuguesa (séculos XV-XVIII)

Monarcas, ministros e cientistas. Mecanismos de poder, governação e informação no Brasil Colonial

Este livro reúne 15 artigos escritos em tempos diferentes, agora reunidos num único volume publicado sob os auspícios do Centro de História de Além-Mar. Econtram-se, contudo, unidos por um denominador comum, o Brasil colonial, e por uma época predominante, o século XVIII. Partindo da noção de que o conhecimento é uma forma de poder, a autora pretende entender como a utilização do saber produzido ao longo de setecentos foi particularmente útil na governação da América Portuguesa, utilizado por governantes como meio de controlo do espaço, da natureza e da humanidade. Este conhecimento permitiu também o descobrimento da colónia brasileira pelos europeus de setecentos, com repercussões evidentes na formação de uma consciência europeia e na formulação de imagens sobre o Império Português e os portugueses, que acentuaram as diferenças culturais, políticas, económicas e científicas existentes, pondo em causa uma visão uniforme da Europa das Luzes.

Almada Negreiros. Artista prismatico

Catálogo da exposição "Almada Negreiros, artista prismatico" realizada entre 20-27 de junho de 2015 no Palazzo Matteucci (Pisa), e organizada pela Universita di Pisa-Sistema Bibliotecario di Ateneo, o Instituto de História da Arte (Universidade Nova de Lisboa), e com collaboração do Sistema Informatico Dipartimentale – Polo 4 Area Umanistica. [Está disponível a introdução do catálogo]

Surface plasmon resonance-coupled photoluminescence and resistive switching behavior of pulsed laser-deposited Ag:SiC nanocermet thin films

In this study, Ag:SiC nanocermets were prepared via rapid thermal annealing (RTA) of pulsed laser-deposited SiC/Ag/SiC trilayers grown on Si substrate. Atomic force microscope images show that silver nanoparticles (Ag NPs) are formed after RTA, and the size of NPs increases with increasing Ag deposition time (t Ag). Sharp dip observed in the reflectance spectra confirmed the existence of Ag surface plasmons (SPs). The infrared transmission spectra showed an intense and broad absorption band around 780–800 cm−1 that can be assigned to Si-C stretching vibration mode. Influence of t Ag on the spectral characteristics of SP-enhanced photoluminescence (PL) and electrical properties of silicon carbide (SiC) films has been investigated. The maximum PL enhancement by 5.5 times for Ag:SiC nanocermets is achieved when t Ag ≈ 50 s. This enhancement is due to the strong resonant coupling between SiC and the SP oscillations of the Ag NPs. Presence of Ag NPs in SiC also induces a forming-free resistive switching with switching ratio of 2 × 10−2. The analysis of I–V curves demonstrates that the trap-controlled space-charge-limited conduction with filamentary model is the governing mechanism for the resistive switching in nanocerment thin films.