Development of a fast capillary electrophoresis method to determine inorganic cations in biodiesel samples

The aim of this study was to develop a fast capillary electrophoresis method for the determination of inorganic cations (Na(+), K(+), Ca(2+), Mg(2+)) in biodiesel samples, using barium (Ba(2+)) as the internal standard. The running electrolyte was optimized through effective mobility curves in order to select the co-ion and Peakmaster software was used to determine electromigration dispersion and buffer capacity. The optimum background electrolyte was composed of 10 mmol L(-1) imidazole and 40 mmol L(-1) of acetic acid. Separation was conducted in a fused-silica capillary (32 cm total length and 23.5 cm effective length, 50 mu m I.D.), with indirect UV detection at 214 nm. The migration time was only 36 s. In order to obtain the optimized conditions for extraction, a fractional factorial experimental design was used. The variables investigated were biodiesel mass, pH, extractant volume, agitation and sonication time. The optimum conditions were: biodiesel mass of 200 mg, extractant volume of 200 mu L. and agitation of 20 min. The method is characterized by good linearity in the concentration range of 0.5-20 mg kg(-1) (r > 0.999), limit of detection was equal to 0.3 mg kg(-1), inter-day precision was equal to 1.88% and recovery in the range of 88.0-120%. The developed method was successfully applied to the determination of cations in biodiesel samples. (c) 2010 Elsevier B.V. All rights reserved.

Determination of fluoxetine in plasma by gas chromatography-mass spectrometry using stir bar sorptive extraction

This article presents a method employing stir bar sorptive extraction (SBSE) with in situ derivatization, in combination with either thermal or liquid desorption on-line coupled to gas chromatography-mass spectrometry for the analysis of fluoxetine in plasma samples. Ethyl chloroformate was employed as derivatizing agent producing symmetrical peaks. Parameters such as solvent polarity, time for analyte desorption, and extraction time, were evaluated. During the validation process, the developed method presented specificity, linearity (R-2 > 0.99), precision (R.S.D. < 15%), and limits of quantification (LOQ) of 30 and 1.37 pg mL(-1), when liquid and thermal desorption were employed, respectively. This simple and highly sensitive method showed to be adequate for the measurement-of fluoxetine in typical and trace concentration levels. (c) 2008 Elsevier B.V. All rights reserved.

Polydimethylsiloxane/polypyrrole stir bar sorptive extraction and liquid chromatography (SBSE/LC-UV) analysis of antidepressants in plasma samples

A new polymeric coating consisting of a dual-phase, polydimethylsiloxane (PDMS) and polypyrrole (PPY) was developed for the stir bar sorptive extraction (SBSE) of antidepressants (mirtazapine, citalopram, paroxetine, duloxetine, fluoxetine and sertraline) from plasma samples, followed by liquid chromatography analysis (SBSE/LC-UV). The extractions were based on both adsorption (PPY) and sorption (PDMS) mechanisms. SBSE variables, such as extraction time, temperature, pH of the matrix, and desorption time were optimized, in order to achieve suitable analytical sensitivity in a short time period. The PDMS/PPY coated stir bar showed high extraction efficiency (sensitivity and selectivity) toward the target analytes. The quantification limits (LOQ) of the SBSE/LC-UV method ranged from 20 ng mL(-1) to 50 ng mL(-1), and the linear range was from LOQ to 500 ng mL(-1), with a determination coefficient higher than 0.99. The inter-day precision of the SBSE/LC-UV method presented a variation coefficient lower than 15%. The efficiency of the SBSE/LC-UV method was proved by analysis of plasma samples from elderly depressed patients. (C) 2008 Elsevier B.V. All rights reserved.

Caracterização molecular dos genes PSO2 e PSO4 de Saccharomyces cerevisiae envolvidos na reparação do DNA : análise funcional e identificação de interações proteína-proteína

O alelo mutante termo-condicionalmente letal pso4-1 do gene PRP19, que codifica uma proteína associada ao spliceossoma, permitiu investigar a influência deste gene no processamento de pré-mRNA, reparação do DNA e esporulação. Fenótipos relacionados a genes portadores de introns foram correlacionados à temperatura. Sistemas repórteres para processamento de pré-mRNA e RT-PCR mostraram que eficiência de processamento de mRNA no mutante pso4-1 é inversamente correlacionada com a temperatura de crescimento. Uma mutação pontual, substituindo uma leucina por uma serina foi identificada dentro da região codificadora N-terminal do alelo Pso4-1 e afeta as propriedades bioquímicas de Pso4-1p. Entre 24 clones isolados utilizando o sistema doishíbridos, 7 foram identificados como partes dos genes RAD2, RLF2 e DBR1. RAD2 codifica uma endonuclease indispensável para a via reparação por excisão de nucleotídeos (NER), RLF2 codifica a subunidade maior do fator de montagem da cromatina I, cuja deleção resulta em sinsibilidade à radiação UVC, enquanto que DBR1 codifica uma enzima que atua sobre substratos de RNA na forma lariat, degradando estruturas lariat em introns durante o processamento de mRNA. A caracterização dos fenótipos após tratamentos com mutágenos em linhagens mutantes simples e duplos de rad2∆, rlf2∆ e pso4-1 mostraram sensibilidade aumentada para para mutantes rad2∆/pso4-1 e rlf2∆/pso4-1, sugerindo uma interferência funcional destas proteínas no processo dereparação do DNA em Saccharomyces cerevisiae. O mecanismo exato de reparação de pontes inter-cadeia (ICL) em S. cerevisiae não é ainda totalmente conhecido. Identificando novos fenótipos e isolando proteínas potencialmente capazes de interagir com Pso2p através da técnica do sistema dois-híbridos, foi possível extender a caracterização deste gene específica para reparação de pontes intercadeia. Tratamentos com acetaldeído (ACA), um metabólito natural da via glicolítica, foi mais tóxico a linhagem mutante pso2 em comparação com a linhagem selvagem e também capaz de induzir a expressão da fusão contendo o promotor de PSO2 à lacZ (PSO2-lacZ) por um fator comparável à tratamentos com outros agentes indutores de ICLs, indicando que o metabólito natural ACA pode causar danos do tipo ICL em S. cerevisiae. A utilização do sistema dois-híbridos permitiu isolar partes de proteínas codificadas por nove diferentes genes, entre eles a proteína quinase Pak1p, um supressor de mutações termosensíveis da DNA Polimerase alfa. Pak1p interage com a extremidade C-terminal conservada de Pso2p, uma região da proteína recentemente nomeada β-CASP entre v ortólogos conhecidos do gene PSO2. A integridade do domínio β-CASP é essencial para a reparaçãode DNA proficiente como demonstrado em ensaios de complementação com mutantes pso2 ∆. Comparação da sobrevivência após tratamento com agentes mutagênicos de simples mutantes pso2 ∆ e pak1 ∆ assim com o dulpo mutante pso2 ∆/pak1 ∆ revelaram que o gene PAK1 é necessário para reparação do DNA proficiente como na linhagem selvagem. A interação epistática dos dois alelos mutantes na linhagem duplo mutante sugere que Pak1p atua na mesma via de reparação a qual PSO2 pertence e que PAK1 constitui um novo locus envolvido na reparação do DNA em S. cerevisiae.

Fatores de influência nas pessoas para a mudança de processos organizacionais: um estudo sobre sua identificação e importância

Identifica-se a gestão por processos como uma abordagem eficaz para alavancar os resultados da organização. Para que isso possa ocorrer porem é necessário modificar os processos de negócio existentes. Pessoas são o único elemento comum na gestão por processos e na mudança. Para realizar os benefícios pretendidos, a ação organizacional deve focalizar seus esforços na consecução do apoio das pessoas. A revisão bibliográfica identificou mais de uma centena de fatores de influência na mudança. Esses fatores foram classificados em 4 grupos, a saber: características do indivíduo – Tipo 1, características do indivíduo – Tipo 2, características da organização e fatores de influência. Somente os identificados como fatores de influência exercem um impacto direto sobre o indivíduo. Estes fatores foram reclassificados nos 15 atributos utilizados para realizar o estudo empírico. O primeiro estudo, qualitativo, selecionou dos 15 fatores de influência no indivíduo para a mudança, os 10 mais importantes. Com esses 10 fatores, foi realizada uma pesquisa quantitativa pela internet visando identificar a importância relativa destes. Foram utilizados dois métodos para estimar a importância de cada fator para cada respondente que participou do estudo: Adaptive Conjoint Analysis (ACA) e Ordenação. Utilizando-se o método estatístico Analise de Agrupamento, foram formados, por semelhança, de 2 a 10 grupos com as importâncias relativas resultantes. Esses agrupamentos foram posteriormente confrontados com as variáveis de controle e com o fato da mudança avaliada, ter sido ou não gerada por uma demanda de tecnologia da informação (TI). Nos grupos formados pelo método ACA, há indícios de que as variáveis de controle e o fator gerador da mudança impactam o comportamento dos indivíduos. Nos grupos formados pelo método ordenação, os indícios revelam que não há impacto nem das variáveis de controle (salvo poucas exceções), nem do fator gerador da mudança. No teste não paramétrico de Friedman e nas comparações múltiplas de Dunn-Bonferroni utilizados para priorizar as importâncias calculadas no método ACA, foram encontrados dois grupos distintos. Pelo método de ordenamento, o resultado da amostra mostrou três grupos com priorização distinta dos atributos.

Changes in volatile composition of Madeira wines during their oxidative ageing

The influence of the age in the volatile composition of Madeira wines made with Boal, Malvazia, Sercial and Verdelho varieties and aged in oak barrel during 1, 11 and 25 years old was been studied. For this purpose, the evolution of volatile compounds: higher alcohols, ethyl esters, fatty acids, furan compounds, enolic compounds, γ-lactones, dioxanes and dioxolanes, of the four most utilised varieties were determined using liquid–liquid extraction with dichloromeihane. Octan-3-ol was used as internal standard. The wines made with these varieties showed great differences in sugar content and small variations on pH and alcoholic degree. The results show that during ageing, the concentration of fatty acids ethyl esters, acetates and fatty acids decrease significantly contrarily to the great increase of ethyl esters of diprotic acids. There is a strong correlation between sotolon, 2-furfural, 5-methyl-2-furfural, 5-hydroxymethyl-2-furfural and 5-ethoxymethyl-2-furfural with wine ageing. These findings indicate that these compounds can be used as ageing wine markers. Among the molecules studied, sotolon [3-hydroxy-4,5-dimethyl-2(5H)-furanone] was one of the few molecules present in concentrations above the perception threshold in Madeira wines. 5-Eihoxymethyl-2-furfural formed from 5-hydroxymethyl-2-furfural and 2-furfural, derived from sugars, are also involved in the aroma of sweet fortified white wines aged in oxidative conditions. The sensory properties change significantly after long periods of conservation.

Analytical characterization of the aroma of Tinta Negra Mole red wine: Identification of the main odorants compounds

A method for the simultaneous determination of major and minor volatiles composition in different types (dry, medium dry, sweet and medium sweet) of a young Tinta Negra Mole (TNM) monovarietal red wine from 2003 harvest has been validated. Wine samples preparation includes a dichloromethane liquid–liquid extraction followed by concentration under a nitrogen atmosphere. The extracted fraction was analysed by gas chromatography–mass spectrometry and give quantitative information for more than 86 analytes whose concentration range from few μg l−1 to 259.1 mg l−1. The method enables high recovery of volatile compounds in wine good linearity with (r2) values higher than 0.980 and good sensitivity. The limits of detection range from 0.003 to 0.534 mg l−1 and limits of quantification from 0.009 to 1.170 mg l−1. The method allows satisfactory determination of more than 80 compounds in the TNM red wines. These wines are characterized by a high content of higher alcohols, ethyl esters, fatty acids and lactones. The levels of sulphur compounds in Tinta Negra Mole medium sweet wines are very low, but they have the highest concentration of carbonyl compounds. Quantitative analysis of the main odorants followed by the determination of aroma index allow us elucidate the aroma of these varieties. On the basis of their odour description and odour threshold, the most powerful odorants of Tinta Negra Mole wines were tentatively established.

Varietal flavour compounds of four grape varieties producing Madeira wines

Boal, Malvasia, Sercial and Verdelho are the main white grape varieties used in Madeira wine production. To estimate the free fraction of varietal aroma compounds of these varieties, 39 samples of musts were analysed to determine their content of monoterpenols and C13 norisoprenoids (terpenoids), using dynamic headspace solid-phase microextraction coupled with gas chromatography–mass spectrometry. The r-values for linearity studies of the analytical method used, varied between 0.977 (nerolidol) and 0.999 (linalool). The repeatability for each compound varied between 2.5% (citronellol) and 11.8% (β-ionone). The mean values from three vintages (1998, 1999 and 2000) confirmed that these musts have differentiated contents of terpenoids. In opposition to Verdelho musts, Malvasia showed the highest free terpenoids content. In order to establish relations between the compounds and the varieties under investigation, principal component analysis and linear discriminant analysis were applied to the data, revealing a good separation and classification power between the four groups as a function of varietal origin.

Development of a dynamic headspace solid-phase microextraction procedure coupled to GC–qMSD for evaluation the chemical profile in alcoholic beverages

In the present study, a simple and sensitive methodology based on dynamic headspace solid-phase microextraction (HS-SPME) followed by thermal desorption gas chromatography with quadrupole mass detection (GC–qMSD), was developed and optimized for the determination of volatile (VOCs) and semi-volatile (SVOCs) compounds from different alcoholic beverages: wine, beer and whisky. Key experimental factors influencing the equilibrium of the VOCs and SVOCs between the sample and the SPME fibre, as the type of fibre coating, extraction time and temperature, sample stirring and ionic strength, were optimized. The performance of five commercially available SPME fibres was evaluated and compared, namely polydimethylsiloxane (PDMS, 100 μm); polyacrylate (PA, 85 μm); polydimethylsiloxane/divinylbenzene (PDMS/DVB, 65 μm); carboxen™/polydimethylsiloxane (CAR/PDMS, 75 μm) and the divinylbenzene/carboxen on polydimethylsiloxane (DVB/CAR/PDMS, 50/30 μm) (StableFlex). An objective comparison among different alcoholic beverages has been established in terms of qualitative and semi-quantitative differences on volatile and semi-volatile compounds. These compounds belong to several chemical families, including higher alcohols, ethyl esters, fatty acids, higher alcohol acetates, isoamyl esters, carbonyl compounds, furanic compounds, terpenoids, C13-norisoprenoids and volatile phenols. The optimized extraction conditions and GC–qMSD, lead to the successful identification of 44 compounds in white wines, 64 in beers and 104 in whiskys. Some of these compounds were found in all of the examined beverage samples. The main components of the HS-SPME found in white wines were ethyl octanoate (46.9%), ethyl decanoate (30.3%), ethyl 9-decenoate (10.7%), ethyl hexanoate (3.1%), and isoamyl octanoate (2.7%). As for beers, the major compounds were isoamyl alcohol (11.5%), ethyl octanoate (9.1%), isoamyl acetate (8.2%), 2-ethyl-1-hexanol (5.9%), and octanoic acid (5.5%). Ethyl decanoate (58.0%), ethyl octanoate (15.1%), ethyl dodecanoate (13.9%) followed by 3-methyl-1-butanol (1.8%) and isoamyl acetate (1.4%) were found to be the major VOCs in whisky samples.

A sensitive microextraction by packed sorbent-based methodology combined with ultra-high pressure liquid chromatography as a powerful technique for analysis of biologically active flavonols in wines

A new approach based on microextraction by packed sorbent (MEPS) and reversed-phase high-throughput ultra high pressure liquid chromatography (UHPLC) method that uses a gradient elution and diode array detection to quantitate three biologically active flavonols in wines, myricetin, quercetin, and kaempferol, is described. In addition to performing routine experiments to establish the validity of the assay to internationally accepted criteria (selectivity, linearity, sensitivity, precision, accuracy), experiments are included to assess the effect of the important experimental parameters such as the type of sorbent material (C2, C8, C18, SIL, and C8/SCX), number of extraction cycles (extract-discard), elution volume, sample volume, and ethanol content, on the MEPS performance. The optimal conditions of MEPS extraction were obtained using C8 sorbent and small sample volumes (250 μL) in five extraction cycle and in a short time period (about 5 min for the entire sample preparation step). Under optimized conditions, excellent linearity View the MathML source(Rvalues2>0.9963), limits of detection of 0.006 μg mL−1 (quercetin) to 0.013 μg mL−1 (myricetin) and precision within 0.5–3.1% were observed for the target flavonols. The average recoveries of myricetin, quercetin and kaempferol for real samples were 83.0–97.7% with relative standard deviation (RSD, %) lower than 1.6%. The results obtained showed that the most abundant flavonol in the analyzed samples was myricetin (5.8 ± 3.7 μg mL−1). Quercetin (0.97 ± 0.41 μg mL−1) and kaempferol (0.66 ± 0.24 μg mL−1) were found in a lower concentration. The optimized MEPSC8 method was compared with a reverse-phase solid-phase extraction (SPE) procedure using as sorbent a macroporous copolymer made from a balanced ratio of two monomers, the lipophilic divinylbenzene and the hydrophilic N-vinylpyrrolidone (Oasis HLB) were used as reference. MEPSC8 approach offers an attractive alternative for analysis of flavonols in wines, providing a number of advantages including highest extraction efficiency (from 85.9 ± 0.9% to 92.1 ± 0.5%) in the shortest extraction time with low solvent consumption, fast sample throughput, more environmentally friendly and easy to perform.

Optimisation of stir bar sorptive extraction and liquid desorption combined with large volume injection-gas chromatography–quadrupole mass spectrometry for the determination of volatile compounds in wines

Stir bar sorptive extraction and liquid desorption followed by large volume injection coupled to gas chromatography–quadrupole mass spectrometry (SBSE–LD/LVI-GC–qMS) had been applied for the determination of volatiles in wines. The methodology was optimised in terms of extraction time and influence of ethanol in the matrix; LD conditions, and instrumental settings. The optimisation was carried out by using 10 standards representative of the main chemical families of wine, i.e. guaiazulene, E,E-farnesol, β-ionone, geranylacetone, ethyl decanoate, β-citronellol, 2-phenylethanol, linalool, hexyl acetate and hexanol. The methodology shows good linearity over the concentration range tested, with correlation coefficients higher than 0.9821, a good reproducibility was attained (8.9–17.8%), and low detection limits were achieved for nine volatile compounds (0.05–9.09 μg L−1), with the exception of 2-phenylethanol due to low recovery by SBSE. The analytical ability of the SBSE–LD/LVI-GC–qMS methodology was tested in real matrices, such as sparkling and table wines using analytical curves prepared by using the 10 standards where each one was applied to quantify the structurally related compounds. This methodology allowed, in a single run, the quantification of 67 wine volatiles at levels lower than their respective olfactory thresholds. The proposed methodology demonstrated to be easy to work-up, reliable, sensitive and with low sample requirement to monitor the volatile fraction of wine.

Development of a new analytical approach based on cellulose membrane and chelator for differentiation of labile and inert metal species in aquatic systems

A new procedure was developed in this study, based on a system equipped with a cellulose membrane and a tetraethylenepentamine hexaacetate chelator (MD-TEPHA) for in situ characterization of the lability of metal species in aquatic systems. To this end, the DM-TEPHA system was prepared by adding TEPHA chelator to cellulose bags pre-purified with 1.0 mol L-1 of HCl and NaOH solutions. After the MD-TEPHA system was sealed, it was examined in the laboratory to evaluate the influence of complexation time (0-24 h), pH (3.0, 4.0, 5.0, 6.0 and 7.0), metal ions (Cu, Cd, Fe, Mn and Ni) and concentration of organic matter (15, 30 and 60 mg L-1) on the relative lability of metal species by TEPHA chelator. The results showed that Fe and Cu metals were complexed more slowly by TEPHA chelator in the MD-TEPHA system than were Cd, Ni and Mn in all pH used. It was also found that the pH strongly influences the process of metal complexation by the MD-TEPHA system. At all the pH levels, Cd, Mn and Ni showed greater complexation with TEPHA chelator (recovery of about 95-75%) than did Cu and Fe metals. Time also affects the lability of metal species complexed by aquatic humic substances (AHS); while Cd, Ni and Mn showed a faster kinetics, reaching equilibrium after about 100 min, and Cu and Fe approached equilibrium after 400 min. Increasing the AHS concentration decreases the lability of metal species by shifting the equilibrium to AHS-metal complexes. Our results indicate that the system under study offers an interesting alternative that can be applied to in situ experiments for differentiation of labile and inert metal species in aquatic systems. (c) 2006 Elsevier B.V. All rights reserved.

Diversidade genética entre progênies e matrizes de rambutan

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Postharvest quality of twelve onion cultivars grown in the Southeast of Brazil

Onions (Allium cepa L.) are grown in different parts of the Brazilian territory and are considered the third most important vegetable crop cultivated in the country, only behind potatoes and tomatoes. The present work was carried out aiming to evaluate the postharvest quality of twelve different onion cultivars grown in the Southeast of Brazil. Onions of the cultivars; 'Adocicada', 'Branca', 'Picante' and 'Roxa' were harvested in commercial fields and the cultivars 'Princesa', 'Serrana', 'Bulbo duplo', 'Granex 33', 'XP 6803', 'XP 8418', 'RP 6010' and 'Superex' were obtained in experimental fields. After harvest, bulbs were taken to the postharvest laboratory and evaluated for total soluble solids, titratable acidity, and pungency (aliinase activity). For total soluble solids 'Superex' had the lowest sugar content (5.4 degrees Brix) whereas the cultivar named 'Picante' showed the highest Brix (11.0 degrees Brix) among the studied materials. For titratable acidity, it was verified that 'Serrana' had the lowest acid content (0.094 g piruvic acid.100 g(-1) FW) whereas 'Branca' showed the highest content of organic acids. When pungency was evaluated it was verified that aliinase activity varied from 1.37 pg piruvic acid.100 g(-1) FW for 'Adocicada' to 12.18 mu g piruvic acid.100 g(-1) FW for 'Roxa', which was considered to have hot pungency (high alliinase activity and low TSS/TA), whereas 'Bulbo duplo' was evaluated as pungent (high alliinase activity and TSS/TA). The combination of the studied characteristics indicated that an onion with high pungency must have high aliinase activity and titratable acidity, whereas sweet onions shall have high soluble solids contents and low aliinase activity. Based on this information, 'Branca' bulbs were considered acids (weak pungency and high acidity), whereas 'Adocicada', 'Princesa', and 'Serrana' bulbs are sweet, due to low alliinase activity and titratable acidity. 'Superex', 'XP 6803', 'Granex 33' and 'Picante' had a moderately pungent flavor (alliinase activity intermediate and low TSS/TA), but 'XP 8418' and 'RP 6010' flavor was evaluated as lightly pungent (low alliinase activity TSS/TA).

Vacuumless kink systems from vacuum systems: An example

Some years ago, Cho and Vilenkin, introduced a model which presents topological solutions, despite not having degenerate vacua as is usually expected. Here we present a new model with topological defects, connecting degenerate vacua but which in a certain limit recovers precisely the one proposed originally by Cho and Vilenkin. In other words, we found a kind of parent model for the so called vacuumless model. Then the idea is extended to a model recently introduced by Bazeia et al. Finally, we trace some comments the case of the Liouville model.