Proper Gluing of Wood, May 1988

Bonding of wood with glue dates back to ancient times but has increased enormously over the past decades. This 2 page report explains the proper way to glue wood.

Carbohydrate gluing, an architectural mechanism in the supramolecular structure of an annelid giant hemoglobin.

We report a carbohydrate-dependent supramolecular architecture in the extracellular giant hemoglobin (Hb) from the marine worm Perinereis aibuhitensis; we call this architectural mechanism carbohydrate gluing. This study is an extension of our accidental discovery of deterioration in the form of the Hb caused by a high concentration of glucose. The giant Hbs of annelids are natural supramolecules consisting of about 200 polypeptide chains that associate to form a double-layered hexagonal structure. This Hb has 0.5% (wt) carbohydrates, including mannose, xylose, fucose, galactose, glucose, N-acetylglucosamine (GlcNAc), and N-acetylgalactosamine (GalNAc). Using carbohydrate-staining assays, in conjunction with two-dimensional polyacrylamide gel electrophoresis, we found that two types of linker chains (L1 and L2; the nomenclature of the Hb subunits followed that for another marine worm, Tylorrhynchus heterochaetus) contained carbohydrates with both GlcNAc and GalNAc. Furthermore, two types of globins (a and A) have only GlcNAc-containing carbohydrates, whereas the other types of globins (b and B) had no carbohydrates. Monosaccharides including mannose, fucose, glucose, galactose, GlcNAc, and GalNAc reversibly dissociated the intact form of the Hb, but the removal of carbohydrate with N-glycanase resulted in irreversible dissociation. These results show that carbohydrate acts noncovalently to glue together the components to yield the complete quaternary supramolecular structure of the giant Hb. We suggest that this carbohydrate gluing may be mediated through lectin-like carbohydrate-binding by the associated structural chains ("linkers").

Energy harvesting device based on a metallic glass/PVDF magnetoelectric laminated composite

A flexible and low cost energy harvester device based on the magnetoelectric (ME) effect has been designed using Fe64Co17Si7B12 as amorphous magnetostrictive ribbons and PVDF as the piezoelectric element. Sandwich-type laminated composite of 3 cm long has been fabricated by gluing these ribbons to the PVDF with the Devcon 5 minute epoxy. Good power output and power density of 6.4 μW and 1.5 mW/cm3, respectively, have been obtained through a multiplier circuit. All values have been measured at the magnetomechanical resonance of the laminate. The effect of the length of the ME laminate on the power output has been also studied, exhibiting a decay as the length of the ME laminate does. Nevertheless, good performance of such device has been obtained for a 0.5 cm long device, working already at 337 KHz, within the low radio frequency (LRF) range.

Análise e melhoria da produtividade numa empresa do sector de componentes de automóveis

Dissertação de mestrado integrado em Engenharia e Gestão Industrial

What is the Jacobian of a Riemann surface with boundary?

We define the Jacobian of a Riemann surface with analytically parametrized boundary components. These Jacobians belong to a moduli space of "open abelian varieties" which satisfies gluing axioms similar to those of Riemann surfaces, and therefore allows a notion of "conformal field theory" to be defined on this space. We further prove that chiral conformal field theories corresponding to even lattices factor through this moduli space of open abelian varieties.

Bridge Deck Repair Using Epoxy Resin, HR-177, 1979

Research funds were approved for the purchase of equipment designed to proportion and inject epoxy resins into delaminated areas of bridge decks. Through investigation and refining of this process, it was anticipated that a maintenance procedure would be developed to delay spalling of bridge decks by "gluing down" delaminated areas before spalling occurred.

Teollisuusyrityksen ekstranet –ratkaisut asiakaspalvelutoiminnan kehittämiseksi

Työssä tarkastellaan sähköisen liiketoiminnan ja asiakaspalvelutoiminnan työvälineenä käytettävän ekstranet–verkon sovellus- ja hyötypotentiaalia teollisuusyrityksissä. Lisäksi selvityksen kohteena ovat ekstranet –palvelu-kanavien strateginen suunnittelu ja kehitys yrityksissä sekä niiden liike-toiminnalliset vaikutukset. Tarkastelun kohteena on esimerkkiyrityksen ekstranet–palvelujärjestelmä ja siinä toimivat sovellukset toiminta-ominaisuuksineen. Lähitarkastelussa on yrityksen yhden ekstranet –moduulin konseptin kehittäminen, joka liittyy uuden sovelluksen pilottikehitys-hankkeeseen, jossa asiakkaalle on tarkoitus tarjota teknistä tukea ns. etädiagnostiikan avulla. Etäseurannan kohteena tässä moduulissa ovat asiakkaan liimausprosessin parametrit, jotka kuvaavat toimittajan liima-aineiden käyttäytymistä asiakkaan prosessissa. Parametritietojen siirtämisen relevanttiutta sekä asiakkaan prosessin problematiikkaa on selvitetty haastattelemalla yrityksen tuotekehityksen ja teknisen asiakaspalvelun avainhenkilöitä. Välittämällä asiakkaan prosessia koskevia tietoja ekstranetiin ja hyväksikäyttämällä niitä päästään merkittäviin molemminpuolisiin tehokkuus- ja kilpailuetuihin sekä kasvavaan asiakasuskollisuuteen. Työn tuloksena on esitetty kehitettävän sovelluksen konsepti, joka voi määritellä ennakkotiedot sitä rakentavalle ASP-toimittajalle sekä toimia vakiomallina sovelluksen käyttökohteita laajennettaessa.

Viilun käsittelyn laadullinen saanto

Työn tavoitteena oli selvittää viilun käsittelyn laadullista saantoa vanerin valmistusprosessissa sekä laadulliseen saantoon vaikuttavia tekijöitä viilun käsittelyyn liittyviä työpisteitä tutkimalla. Kirjallisuusosassa tarkasteltiin vanerin valmistusprosessia, viilun ominaisuuksia erityisesti laadun osalta, standardin mukaisia laatuluokkia, saantoon vaikuttavia tekijöitä sekä tuotannonohjauksen periaatteita viilun valmistuksessa. Kokeellinen osa perustui tuotannonraportointijärjestelmästä saataviin tietoihin sekä haastattelu- ja seurantatutkimuksiin eräällä vaneritehtaalla. Kokeellisessa osassa käytiin läpi viilun käsittelyyn liittyvät työvaiheet viilun leikkauksesta ja lajittelusta viilun liimoitukseen ja ladontaan saakka. Lisäksi tutkittiin käytössä olevan viilun lajittelujärjestelmän tuloksen oikeellisuutta viilun laadutuksessa, saumauksen onnistumista, viilun paikkauksen laadullista onnistumista sekä ladonnan onnistumista viilun käsittelyn nykytilan selvittämiseksi. Tutkimuksen tulosten perusteella pohdittiin lajittelussa tapahtuvaa laadullisen saannon tulosta kohdeyrityksessä sekä esitettiin joukko kehitysehdotuksia, joilla viilutuotantoa voidaan selkeyttää ja parantaa tulevaisuudessa.

Vanerin tuotantoprosessin tehostaminen ja raaka-aineen käyttösuhteen parantaminen

Työn tavoitteena oli vanerin tuotantoprosessin tehostaminen ja raaka-aineen käyttösuhteen parantaminen Schauman Wood Oy:n Kuopion vaneritehtaalla. Tuotannon pitkä läpimenoaika ja välivarastojen suuri määrä sitovat paljon pääomaa. Välivarastot ovat tuotannon kapeikkokohtien seurannaisia, koska yksittäisten konelinjojen kapasiteetti ei ole tasapainossa optimaaliseen materiaalin virtaukseen nähden. Teoriaosuus käsittelee valmistettavaa vanerituotetta, tuotantotaloutta, tuotannon- ja materiaalin ohjausta sekä Kuopion vaneritehtaan tuotantoprosessia, joiden avulla selvitään vanerin valmistukseen liittyviä asioita ja niiden yhteyksiä toisiinsa. Tutkimuksen kokeellisessa osassa poistettiin yksi työvaihe vanerin valmistusprosessista ja samalla kiinnitettiin suurta huomiota viilun valmistuksen mittatarkkuuteen. Vanerin liimauksessa aihion reunat jäävät epätasaisiksi, mikä johtuu viilujen mittavaihtelusta, ladontamenetelmästä ja ladonnan tarkkuudesta. Levyjen reunat puhdistetaan ja oikaistaan sahaamalla niistä pois 30 - 50 mm leveät suikaleet. Useasti levyn ensimmäinen sahaus, eli niin sanottu karsintasahaus, on valmisteleva toimenpide tulevaa jatkokäsittelyä varten. Karsintasahauksen poistamisella saavutetaan nopeampi läpimenoaika, pienempi välivarasto viimeistelyosastolla sekä puumateriaalin säästö jättämällä reunojen oikaisu pois.

Alcatrão ou creosoto de eucalipto na produção de adesivos fenólicos para colagem de madeira

This study has shown that Eucalyptus tar and creosote can be used in phenolic adhesive formulations (resols) for wood products bonding. Some adhesives were prepared substituting 0; 17.7; 35.0 and 67.0% of the phenol by anhydrous tar and 0; 15.0 e 28.5% by creosote. In gluing Brazilian pine veneers, eucalypt tar and creosote based adhesives required longer pressing times for curing than conventional phenol-formaldehyde adhesives. By using 13C NMR, the number of carbons in side chains and hydroxyl, carbonyl, carboxyl and methoxyl groups related to 100 aromatic rings could be estimated in tar and creosote. In creosote, after reaction with excess formaldehyde in alkaline medium, only 0,28 hydroxymethyl groups was detected per phenolic ring. This low amount of hydroxymethylation explains the lack of reactivity in curing observed when creosote was introduced in a standard adhesive formulation.

Influence of Heat Treatment on Strength Properties of Finger-jointed Components

The purpose for the thesis was to study the thermo treatment of finger-jointed wood. The thesis concentrated on examining the tensile and bending strength of finger-jointed and thermo treated wood. The aim was to find out how different treatment temperature levels and adhesives influence the strength of wood that has been finger-jointed before heat treatment. Secondary objectives were to examine the influence of the treatment time at one temperature, determine differences in the strength between the joints in heartwood and sapwood, examine the visual appearance of the finger joints after the treatment and establish possibilities to reach a characteristic strength level corresponding to C14. Only minor differences in strength properties were measured between the finger-jointed wood treatments II and III. A greater difference was shown between these two treatment temperatures I, which lead to reduced strength. The average strength of joints glued with adhesive 2 was higher after treatments II and III compared to those glued with the adhesive 1. At the treatment temperature I, the adhesive 1 strength properties were at the same level compared to the adhesive 2 or better. There were not any significant differences.

Koivuvanerin palonkesto-ominaisuuksien parantaminen liimaseoksen koostumusta muuttamalla

Viime vuosina puutuotteiden palonkestävyydelle asetetut vaatimukset ovat kasvaneet. Puutuotteiden käyttöä on mahdollista lisätä, mikäli niiden palonkestävyyttä saadaan parannettua. Tässä diplomityössä tutkittiin palonestoaineiden vaikutusta liimaseoksen ominaisuuksiin, liimautuvuuteen ja palonkestävyyteen. Työn tarkoituksena oli löytää liimaseos, jonka avulla saadaan koivuvanerin palonkestävyyttä parannettua. Teoriaosuudessa on käyty läpi koivuvanerin valmistusprosessi ja käytettävät liimat, ominaisuudet sekä käyttökohteet. Teoriaosuudessa käsitellään myös puutuotteiden syttymistä ja vertaillaan erilaisia palonestoaineita ja niiden vaikutusmekanismeja. Työn kokeellinen osuus koostui hartsiseoksen imeytyvyyden tutkimisesta, liimaseosten ominaisuuksien selvittämisestä, vanerilevyjen liimautuvuuden ja liimauslujuuden testaamisesta sekä palonkestävyysominaisuuksien selvittämisestä. Työssä saavutettiin pientä parannusta levyjen palonkestävyysominaisuuksiin. Tavoitteeksi asetettua palonkestävyyden kaksinkertaistumista ei saavutettu. Työ antaa kuitenkin hyvän pohjan palonestoaineiden ja vanerihartsien palonkestävyys-ominaisuuksien tutkimisen jatkamiselle. Työssä saavutettuja tuloksia tullaan hyödyntämään vanerilevyjen palo-ominaisuuksien parantamiseen tähtäävissä tutki-muksissa.

Tailoring Magnetic Properties of Co-Fe Thin Films by Topographical Modifications Using Thermal Annealing and Swift Heavy Ion Irradiation and Fabrication of Magnetoelectric Multilayers for Device Applications

Magnetism and magnetic materials have been playing a lead role in improving the quality of life. They are increasingly being used in a wide variety of applications ranging from compasses to modern technological devices. Metallic glasses occupy an important position among magnetic materials. They assume importance both from a scientific and an application point of view since they represent an amorphous form of condensed matter with significant deviation from thermodynamic equilibrium. Metallic glasses having good soft magnetic properties are widely used in tape recorder heads, cores of high-power transformers and metallic shields. Superconducting metallic glasses are being used to produce high magnetic fields and magnetic levitation effect. Upon heat treatment, they undergo structural relaxation leading to subtle rearrangements of constituent atoms. This leads to densification of amorphous phase and subsequent nanocrystallisation. The short-range structural relaxation phenomenon gives rise to significant variations in physical, mechanical and magnetic properties. Magnetic amorphous alloys of Co-Fe exhibit excellent soft magnetic properties which make them promising candidates for applications as transformer cores, sensors, and actuators. With the advent of microminiaturization and nanotechnology, thin film forms of these alloys are sought after for soft under layers for perpendicular recording media. The thin film forms of these alloys can also be used for fabrication of magnetic micro electro mechanical systems (magnetic MEMS). In bulk, they are drawn in the form of ribbons, often by melt spinning. The main constituents of these alloys are Co, Fe, Ni, Si, Mo and B. Mo acts as the grain growth inhibitor and Si and B facilitate the amorphous nature in the alloy structure. The ferromagnetic phases such as Co-Fe and Fe-Ni in the alloy composition determine the soft magnetic properties. The grain correlation length, a measure of the grain size, often determines the soft magnetic properties of these alloys. Amorphous alloys could be restructured in to their nanocrystalline counterparts by different techniques. The structure of nanocrystalline material consists of nanosized ferromagnetic crystallites embedded in an amorphous matrix. When the amorphous phase is ferromagnetic, they facilitate exchange coupling between nanocrystallites. This exchange coupling results in the vanishing of magnetocrystalline anisotropy which improves the soft magnetic properties. From a fundamental perspective, exchange correlation length and grain size are the deciding factors that determine the magnetic properties of these nanocrystalline materials. In thin films, surfaces and interfaces predominantly decides the bulk property and hence tailoring the surface roughness and morphology of the film could result in modified magnetic properties. Surface modifications can be achieved by thermal annealing at various temperatures. Ion irradiation is an alternative tool to modify the surface/structural properties. The surface evolution of a thin film under swift heavy ion (SHI) irradiation is an outcome of different competing mechanism. It could be sputtering induced by SHI followed by surface roughening process and the material transport induced smoothening process. The impingement of ions with different fluence on the alloy is bound to produce systematic microstructural changes and this could effectively be used for tailoring magnetic parameters namely coercivity, saturation magnetization, magnetic permeability and remanence of these materials. Swift heavy ion irradiation is a novel and an ingenious tool for surface modification which eventually will lead to changes in the bulk as well as surface magnetic property. SHI has been widely used as a method for the creation of latent tracks in thin films. The bombardment of SHI modifies the surfaces or interfaces or creates defects, which induces strain in the film. These changes will have profound influence on the magnetic anisotropy and the magnetisation of the specimen. Thus inducing structural and morphological changes by thermal annealing and swift heavy ion irradiation, which in turn induce changes in the magnetic properties of these alloys, is one of the motivation of this study. Multiferroic and magneto-electrics is a class of functional materials with wide application potential and are of great interest to material scientists and engineers. Magnetoelectric materials combine both magnetic as well as ferroelectric properties in a single specimen. The dielectric properties of such materials can be controlled by the application of an external magnetic field and the magnetic properties by an electric field. Composites with magnetic and piezo/ferroelectric individual phases are found to have strong magnetoelectric (ME) response at room temperature and hence are preferred to single phasic multiferroic materials. Currently research in this class of materials is towards optimization of the ME coupling by tailoring the piezoelectric and magnetostrictive properties of the two individual components of ME composites. The magnetoelectric coupling constant (MECC) (_ ME) is the parameter that decides the extent of interdependence of magnetic and electric response of the composite structure. Extensive investigates have been carried out in bulk composites possessing on giant ME coupling. These materials are fabricated by either gluing the individual components to each other or mixing the magnetic material to a piezoelectric matrix. The most extensively investigated material combinations are Lead Zirconate Titanate (PZT) or Lead Magnesium Niobate-Lead Titanate (PMNPT) as the piezoelectric, and Terfenol-D as the magnetostrictive phase and the coupling is measured in different configurations like transverse, longitudinal and inplane longitudinal. Fabrication of a lead free multiferroic composite with a strong ME response is the need of the hour from a device application point of view. The multilayer structure is expected to be far superior to bulk composites in terms of ME coupling since the piezoelectric (PE) layer can easily be poled electrically to enhance the piezoelectricity and hence the ME effect. The giant magnetostriction reported in the Co-Fe thin films makes it an ideal candidate for the ferromagnetic component and BaTiO3 which is a well known ferroelectric material with improved piezoelectric properties as the ferroelectric component. The multilayer structure of BaTiO3- CoFe- BaTiO3 is an ideal system to understand the underlying fundamental physics behind the ME coupling mechanism. Giant magnetoelectric coupling coefficient is anticipated for these multilayer structures of BaTiO3-CoFe-BaTiO3. This makes it an ideal candidate for cantilever applications in magnetic MEMS/NEMS devices. SrTiO3 is an incipient ferroelectric material which is paraelectric up to 0K in its pure unstressed form. Recently few studies showed that ferroelectricity can be induced by application of stress or by chemical / isotopic substitution. The search for room temperature magnetoelectric coupling in SrTiO3-CoFe-SrTiO3 multilayer structures is of fundamental interest. Yet another motivation of the present work is to fabricate multilayer structures consisting of CoFe/ BaTiO3 and CoFe/ SrTiO3 for possible giant ME coupling coefficient (MECC) values. These are lead free and hence promising candidates for MEMS applications. The elucidation of mechanism for the giant MECC also will be the part of the objective of this investigation.

Geometrical isomers of [TEAH][Co(L-Se)(2)]center dot xH(2)O: synthesis, structural, spectroscopic and computational studies

Trans-1, [HNEt3][Co-III(L-Se)(2)]center dot H2O and cis-1, [HNEt3][Co-III(L-Se)(2)]center dot 3H(2)O have been synthesized and characterized by single-crystal X-ray studies. The counter ion Et3NH+ plays a crucial role in the crystal packing leading to the formation of two distinctly different supramolecular assemblies in the two complexes. In trans-1, Co-bisphenolate units and triethylamine molecules are arranged in a linear fashion leading to a supramolecular columnar assembly along the crystallographic a-axis. In this assembly, triethylammonium ions are sandwiched between successive Co-bisphenolate units and act as gluing agents joining Co-bisphenolate units on either side through C-H center dot center dot center dot pi interactions. In sharp contrast to trans-1, Co-bisphenolate units and triethylammonium ions in cis-1 are arranged in a helical supramolecular assembly through similar C-H center dot center dot center dot pi interactions along the crystallographic b-axis. The Se center dot center dot center dot Se van der Waals interactions may be responsible for the predominant occurrence of the cis-isomer. The cyclic voltammetric studies showed quasi-reversible waves for the cobalt(III) -> cobalt(II) reductions with E-1/2 = 0.635 and 0.628 V vs. Ag/AgCl for cis-1 (at similar to 5 degrees C) and trans-1 (at similar to 25 degrees C), respectively. DFT calculations show that the trans-form is the thermodynamic product with higher stability than the cis-one, which is consistent with the variable temperature H-1 NMR studies

Fabrication and integration of planar electrodes for contactless conductivity detection on polyester-toner electrophoresis microchips

In this report, we describe the microfabrication and integration of planar electrodes for contactless conductivity detection on polyester-toner (PT) electrophoresis microchips using toner masks. Planar electrodes were fabricated by three simple steps: (i) drawing and laser-printing the electrode geometry on polyester films, (ii) sputtering deposition onto substrates, and (iii) removal of toner layer by a lift-off process. The polyester film with anchored electrodes was integrated to PT electrophoresis microchannels by lamination at 120 degrees C in less than 1 min. The electrodes were designed in an antiparallel configuration with 750 mu m width and 750 gm gap between them. The best results were recorded with a frequency of 400 kHz and 10 V-PP using a sinusoidal wave. The analytical performance of the proposed microchip was evaluated by electrophoretic separation of potassium, sodium and lithium in 150 mu m wide x 6 mu m deep microchannels. Under an electric field of 250 V/cm the analytes were successfully separated in less than 90 s with efficiencies ranging from 7000 to 13 000 plates. The detection limits (S/N = 3) found for K+, Na+, and Li+ were 3.1, 4.3, and 7.2 mu mol/L, respectively. Besides the low-cost and instrumental simplicity, the integrated PT chip eliminates the problem of manual alignment and gluing of the electrodes, permitting more robustness and better reproducibility, therefore, more suitable for mass production of electrophoresis microchips.