La Formación Corumbataí y su importancia en la industria cerámica del estado de São Paulo - Brasil

El desarrollo acelerado del polo cerámico de Santa Gertrudes (provincia de São Paulo) en la década de 90, fue causado principalmente por la localización privilegiada de la materia prima asociada al desarrollo tecnológico, las grandes reservas, el acceso fácil por autopistas que facilitan la distribución de los productos y la proximidad de los grandes centros consumidores. Este desarrollo facilitó que este Polo tuviera un boom en el inicio de 2007 en la fase de madurez con una producción de 367 millones de metros cuadrados, transformándose así en el mayor polo cerámico de las Américas. de acuerdo con los estudios geológicos realizados en este trabajo, las rocas de la Formación Corumbataí, origen de la materia prima usada en el polo cerámico, fueron clasificadas en cinco litofacies: maciza, laminada, intercalada I, intercalada II y alterada. Estas litofacies, por sus características mineralógicas y químicas, fueron consideradas arcillas illíticas con porcentaje medio de fundentes. Tomando como referencia las Normas para baldosas cerámicas, las características cerámicas obtenidas en el laboratorio demostraron que la mayoría de la materia prima es compatible con el grupo BIIb (Absorción de agua entre 6 y 10%).

Influência da distribuição granulométrica na estabilidade dimensional de placas cerâmicas de base vermelha

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fungos anamorfos do solo da região dos lagos no Município de Santa Gertrudes, SP, Brasil

O solo do pólo cerâmico no município de Santa Gertrudes, SP, tem sido poluído há décadas por diversos elementos químicos, principalmente chumbo e zinco. Foram realizadas quatro coletas de amostras de solo, duas durante a época chuvosa e duas na seca, em cinco locais, de novembro de 2002 a junho de 2003, determinando-se temperatura, pH, teores de chumbo e zinco e a umidade do solo. Os fungos foram isolados pelo método de Warcup, modificado pelo preparo de suspensões aquosas de solo (1:10) e aplicação de 1 cm³ das suspensões sobre malte agar (2%), adicionado de Zn(NO3)2 e Pb(NO3)2 em concentrações crescentes: 0, 100, 200, 500 e 1.000 mg dm-3. Após cinco dias de incubação a 25 ºC, as colônias foram purificadas e identificadas. Foram obtidos 70 táxons de fungos anamorfos, com 70% de similaridade entre as micotas obtidas nos meios com os dois metais. Foram isolados 43 táxons nos meios de cultura com Pb(NO3)2, com predominância deles nas concentrações mais elevadas (500 a 1.000 mg dm-3). Foram obtidos 63 táxons nos meios com Zn(NO3)2, principalmente nas concentrações moderada e elevada (200 e 500 mg dm-3). Prevaleceram espécies de Trichoderma, de Penicillium e diversos fungos que são encontrados associados a substratos vegetais em decomposição. A tendência de se obter número elevado de táxons em meios de cultura com concentrações moderadas a elevadas de Zn e Pb pode ser justificada pela existência de bem adaptada e competitiva micota do solo, caracterizada por elevada capacidade de tolerância aos metais e eficiente habilidade sapróbia competitiva.

Reintegração dos finos provenientes do beneficiamento de argila no processo de produção de revestimentos via seca

Na região de Rio Claro (SP), localiza-se o Pólo Cerâmico de Santa Gertrudes, responsável por cerca de 50% da produção nacional de revestimentos. Durante o beneficiamento da argila e preparação da massa, cerca de 2 a 3% argila fina é colocada em suspensão no ar, sendo quase toda retida nos filtros de manga. Esse material fino, por problemas de homogeneização ou tecnológico, representa perda de material e se constitui em um potencial agente de contaminação do ar e da água, necessitando ser armazenado. A presente pesquisa buscou viabilizar o aproveitamento do pó retido nos filtros, no próprio processo, através da granulação da massa por aspersão de barbotina preparada com o pó. Investigaram-se a composição ideal da barbotina e a influência dessa metodologia no produto final, comparando a massa granulada por aspersão com a massa-padrão.

Alterações hidrogeomorfológicas devido à dinâmica de uso da terra na Bacia Hidrográfica do Ribeirão Santa Gertrudes (SP)

Agricultural and mining activities are directly related to changes in natural landscapes. From the perspective of anthropogenic geomorphology supported by general systems theory, this research has developed, in order to identify and analyze changes in the land use, mainly from agriculture and the exploitation of clay, and its implications in the hydro-geomorphological characteristics in the Santa Gertrudes Stream watershed (SP). This area is within the context of the Ceramic Pole Santa Gertrudes (SP), which besides its importance as a supplier of raw material, is characterized as the largest center of international reference in ceramic tiles on the American continent. For this purpose, we made land use and geomorphology maps of two scenarios, corresponding to the years 1962 and 2006, which allowed the identification of changes caused by human activities on the landforms of the area, such as the increase in area of parcels intended for mining activity, which went from 3.1% to occupy 19% of the catchment area of the respective period and that, among other changes, gave rise to new forms of relief as, for example, in levels of pit mining abrupt and smooth. The results indicate that the main features of representative of human changes in relief are represented for opening of large clay mining pits and agricultural activities, which intensified the denudation and sedimentation processes in the Santa Gertrudes Stream watershed.

Mucorales de solo contaminado com metais pesados na região do pólo cerâmico de Santa Gertrudes, SP: ocorrência e capacidade de biossorção de chumbo e zinco

Pós-graduação em Ciências Biológicas (Microbiologia Aplicada) - IBRC

Diversidade dos fungos anamorfos no solo do pólo cerâmico do município de Santa Gertrudes, São Paulo, Brasil e tolerância de Aspergillus terreus Thom e Paecilomyces lilacinus (Thom) Samson e sais de chumbo e de zinco

Pós-graduação em Ciências Biológicas (Microbiologia Aplicada) - IBRC

Argilas: composição mineralógica, distribuição granulométrica e consistência de pastas

As argilas vermelhas, utilizadas para cerâmica estrutural e de revestimentos, apresentam variações significativas que se refletem no comportamento apresentado durante o uso, para obtenção de determinado produto. Dentro de cada segmento industrial há requisitos básicos para que uma determinada argila ou mistura tenha capacidade de dar produtos que se encaixem dentro das respectivas Normas. Um dos parâmetros básicos para sua classificação é a absorção de água das peças cerâmicas, que resulta da presença de poros abertos. Esta depende, tanto das matérias primas utilizadas, quanto dos processos aplicados durante a fabricação (moagem, umidificação, conformação e queima, principalmente). Neste trabalho foram estudadas argilas vermelhas provenientes da Formação Corumbataí na região do Pólo Cerâmico de Santa Gertrudes (SP) e da Formação Tatuí na região de Cesário Lange (SP) procurando parâmetros indicativos que permitam uma seleção apropriada de matérias primas para realizar combinações adequadas das mesmas, para revestimentos via seca no primeiro caso, e blocos estruturais no segundo. Foram amostradas argilas com características diferentes, estudando a evolução da sinterização com o aumento da temperatura visando analisar a influencia da distribuição granulométrica e da mineralogia no comportamento apresentado. Com as mesmas amostras foram preparadas misturas calculando a contribuição de cada matéria-prima baseado na absorção de água de cada componente, prefixando a temperatura de queima e o valor de absorção de água. As diferenças entre os valores experimentais e os esperados foram analisadas visando entender as causas das variações. A distribuição de partículas resultante da moagem das matérias primas é influenciada fortemente por processos de intemperismo, sendo que, em termos gerais, as mais intemperizadas...

Zoneamento geoambiental como instrumento de planejamento e gestão de recursos do pólo cerâmico de Santa Gertrudes

The disorded and unnplaned occupation is not recent in out territory but it concerns to a historical territorial invasion that roots the time of our country discovery. However, they have started to cause issues nowadays, as in the case of urban conurbations. Somehow these unorganized urban, industrial and agricultural occupations did not have any sort of information or indication of the appropriate situation at that time. Because of that there has been researches by several groups to induce the users of the several renewable and non renewable resources to explore them according to their natural potential capacity.The Ceramic Pole of Santa Gertrudes, the national largest producer of ceramic tile, faces this problem of disorder occupation. Among other themes, the reorganization of the physical environment, proposed by several groups of researchers and scholars of this subject, is gaining attention now.The method of Geoenvironmental Zoning results in a way of prevention from this issue. Crossing information of the physical environment and generating maps whose areas and subdivisions have similar characteristics, it is possible to manage studies and handle these areas according to their potentiality.

A cartografia geomorfológica como subsídio para a análise do relevo antropogênico em área de mineração

Mining activities are directly related to changes in natural landscapes. With the objective of analyzing the changes imposed by the geomorphological dynamics of human action in areas of mining clay, two fragments were selected from the basin of Ribeirão Santa Gertrudes / SP, representing denudational and sedimentation processes respectively. This area is within the context of the Ceramic Pole Santa Gertrudes / SP, which besides its importance as a supplier of raw material, is characterized as the largest center of international reference in ceramic tiles on the American continent. Data was collected and analyzed from the perspective of anthropogenic geomorphology supported by general systems theory and uses techniques from evolutionary geomorphological mapping. Thus, geomorphological mapping were produced concerning three scenarios, which date from 1962, 1988 and 2006 in a scale of 1:10.000. These surveys allowed us to infer a detailed investigation of the evolution of changes in topography and hydrology, geomorphology representative of the original (1962), which has characteristics of an earlier phase of earlier existing large mining pits, and its evolution to a anthropogenic geomorphological stage, represented by active disruption scenarios dating from 1988 and 2006. The last two scenarios have analyzed changes in the dimensions of relief features when compared with the original scenario representative of geomorphology, as well as an intense reallocation of surface and subsurface materials, in which human action is highlighted by becoming responsible for sculpting the landscape through the imposition of control mechanisms to natural processes.

Report on Pole Canyon Area and Area Three Miles Southeast of Jefferson Island

The primary purpose of the trip was to acquaint the students with some of the problems that occur in the field, and also how to make geologic maps of sections, outcrops, faults, and other geologic features of the earths surface.

Pole tip recession in linear tape systems

The tribology of linear tape storage system including Linear Tape Open (LTO) and Travan5 was investigated by combining X-ray Photoelectron Spectroscopy (XPS), Auger Electron Spectroscopy (AES), Optical Microscopy and Atomic Force Microscopy (AFM) technologies. The purpose of this study was to understand the tribology mechanism of linear tape systems then projected recording densities may be achieved in future systems. Water vapour pressure or Normalized Water Content (NWC) rather than the Relative Humidity (RH) values (as are used almost universally in this field) determined the extent of PTR and stain (if produced) in linear heads. Approximately linear dependencies were found for saturated PTR increasing with normalized water content increasing over the range studied using the same tape. Fe Stain (if produced) preferentially formed on the head surfaces at the lower water contents. The stain formation mechanism had been identified. Adhesive bond formation is a chemical process that is governed by temperature. Thus the higher the contact pressure, the higher the contact temperature in the interface of head and tape, was produced higher the probability of adhesive bond formation and the greater the amount of transferred material (stain). Water molecules at the interface saturate the surface bonds and makes adhesive junctions less likely. Tape polymeric binder formulation also has a significant role in stain formation, with the latest generation binders producing less transfer of material. This is almost certainly due to higher cohesive bonds within the body of the magnetic layer. TiC in the two-phase ceramic tape-bearing surface (AlTiC) was found to oxidise to form TiO2.The oxidation rate of TiC increased with water content increasing. The oxide was less dense than the underlying carbide; hence the interface between TiO2 oxide and TiC was stressed. Removals of the oxide phase results in the formation of three-body abrasive particles that were swept across the tape head, and gave rise to three-body abrasive wear, particularly in the pole regions. Hence, PTR and subsequent which signal loss and error growth. The lower contact pressure of the LTO system comparing with the Travan5 system ensures that fewer and smaller three-body abrasive particles were swept across the poles and insulator regions. Hence, lower contact pressure, as well as reducing stain in the same time significantly reduces PTR in the LTO system.

Paired Evaluation Of Calvarial Reconstruction With Prototyped Titanium Implants With And Without Ceramic Coating.

To investigate the osseointegration properties of prototyped implants with tridimensionally interconnected pores made of the Ti6Al4V alloy and the influence of a thin calcium phosphate coating. Bilateral critical size calvarial defects were created in thirty Wistar rats and filled with coated and uncoated implants in a randomized fashion. The animals were kept for 15, 45 and 90 days. Implant mechanical integration was evaluated with a push-out test. Bone-implant interface was analyzed using scanning electron microscopy. The maximum force to produce initial displacement of the implants increased during the study period, reaching values around 100N for both types of implants. Intimate contact between bone and implant was present, with progressive bone growth into the pores. No significant differences were seen between coated and uncoated implants. Adequate osseointegration can be achieved in calvarial reconstructions using prototyped Ti6Al4V Implants with the described characteristics of surface and porosity.

Effect of different ferrule designs on the fracture resistance and failure pattern of endodontically treated teeth restored with fiber posts and all-ceramic crowns

OBJECTIVE: This study investigated the effect of different ferrule heights on endodontically treated premolars. MATERIAL AND METHODS: Fifty sound mandibular first premolars were endodontically treated and then restored with 7-mm fiber post (FRC Postec Plus #1 Ivoclar-Vivadent) luted with self-polymerized resin cement (Multilink, Ivoclar Vivadent) while the coronal section was restored with hybrid composite core build-up material (Tetric Ceram, Ivoclar-Vivadent), which received all-ceramic crown. Different ferrule heights were investigated: 1-mm circumferential ferrule without post and core (group 1 used as control), a circumferential 1-mm ferrule (group 2), non-uniform ferrule 2-mm buccally and 1-mm lingually (group 3), non-uniform ferrule 3-mm buccally and 2-mm lingually (group 4), and finally no ferrule preparation (group 5). The fracture load and failure pattern of the tested groups were investigated by applying axial load to the ceramic crowns (n=10). Data were analyzed statistically by one-way ANOVA and Tukey's post-hoc test was used for pair-wise comparisons (α=0.05). RESULTS: There were no significant differences among the failure load of all tested groups (P<0.780). The control group had the lowest fracture resistance (891.43±202.22 N) and the highest catastrophic failure rate (P<0.05). Compared to the control group, the use of fiber post reduced the percentage of catastrophic failure while increasing the ferrule height did not influence the fracture resistance of the restored specimens. CONCLUSIONS: Within the limitations of this study, increasing the ferrule length did not influence the fracture resistance of endodontically treated teeth restored with glass ceramic crowns. Insertion of a fiber post could reduce the percentage of catastrophic failure of these restorations under function.

Correlation between metal-ceramic bond strength and coefficient of linear thermal expansion difference

The purpose of this study was to evaluate the metal-ceramic bond strength (MCBS) of 6 metal-ceramic pairs (2 Ni-Cr alloys and 1 Pd-Ag alloy with 2 dental ceramics) and correlate the MCBS values with the differences between the coefficients of linear thermal expansion (CTEs) of the metals and ceramics. Verabond (VB) Ni-Cr-Be alloy, Verabond II (VB2), Ni-Cr alloy, Pors-on 4 (P), Pd-Ag alloy, and IPS (I) and Duceram (D) ceramics were used for the MCBS test and dilatometric test. Forty-eight ceramic rings were built around metallic rods (3.0 mm in diameter and 70.0 mm in length) made from the evaluated alloys. The rods were subsequently embedded in gypsum cast in order to perform a tensile load test, which enabled calculating the CMBS. Five specimens (2.0 mm in diameter and 12.0 mm in length) of each material were made for the dilatometric test. The chromel-alumel thermocouple required for the test was welded into the metal test specimens and inserted into the ceramics. ANOVA and Tukey's test revealed significant differences (p=0.01) for the MCBS test results (MPa), with PI showing higher MCBS (67.72) than the other pairs, which did not present any significant differences. The CTE (10-6 oC-1) differences were: VBI (0.54), VBD (1.33), VB2I (-0.14), VB2D (0.63), PI (1.84) and PD (2.62). Pearson's correlation test (r=0.17) was performed to evaluate of correlation between MCBS and CTE differences. Within the limitations of this study and based on the obtained results, there was no correlation between MCBS and CTE differences for the evaluated metal-ceramic pairs.