Stability enhancement by casing grooves: The importance of stall inception mechanism and solidity

This paper concerns the optimisation of casing grooves and the important influence of stall inception mechanism on groove performance. Installing casing grooves is a well known technique for improving the stable operating range of a compressor, but the wide-spread use of grooves is restricted by the loss of efficiency and flow capacity. In this paper, laboratory tests are used to examine the conditions under which casing treatment can be used to greatest effect. The use of a single casing groove was investigated in a recently published companion paper. The current work extends this to multiple-groove treatments and considers their performance in relation to stall inception mechanisms. Here it is shown that the stall margin gain from multiple grooves is less than the sum of the gains if the grooves were used individually. By contrast, the loss of efficiency is additive as the number of grooves increases. It is then shown that casing grooves give the greatest stall margin improvement when used in a compressor which exhibits spike-type stall inception, while modal activity before stall can dramatically reduce the effectiveness of the grooves. This finding highlights the importance of being able to predict the stall inception mechanism which might occur in a given compressor before and after grooves are added. Some published prediction techniques are therefore examined, but found wanting. Lastly, it is shown that casing grooves can, in some cases, be used to remove rotor blades and produce a more efficient, stable and light-weight rotor. © 2010 by ASME.

Numerical and Experimental Study of the Performance Effects of Varying Vaneless Space and Vane Solidity in Radial Inflow Turbine Stators.

An extensive experimental program has been carried out on a 135?mm tip diameter radial turbine using a variety of stator designs, in order to facilitate direct performance comparisons of varying stator vane solidity and the effect of varying the vaneless space. A baseline vaned stator was designed using commercial blade design software, having 15 vanes and a vane trailing edge to rotor leading edge radius ratio (Rte/rle) of 1.13. Two additional series of stator vanes were designed and manufactured; one series having varying vane numbers of 12, 18, 24, and 30, and a further series with Rte/rle ratios of 1.05, 1.175, 1.20, and 1.25. As part of the design process a series of CFD simulations were carried out in order to guide design iterations towards achieving a matched flow capacity for each stator. In this way the variations in the measured stage efficiency could be attributed to the stator passages only, thus allowing direct comparisons to be made. Interstage measurements were taken to capture the static pressure distribution at the rotor inlet and these measurements were then used to validate subsequent numerical models. The overall losses for different stators have been quantified and the variations in the measured and computed efficiency were used to recommend optimum values of vane solidity and Rte/rle.

Morphology-based model for predicting osteocyte-like cell line (MLO-Y4) growth process

This work has led to the development of empirical mathematical models to quantitatively predicate the changes of morphology in osteocyte-like cell lines (MLO-Y4) in culture. MLO-Y4 cells were cultured at low density and the changes in morphology recorded over 11 hours. Cell area and three dimensional shape features including aspect ratio, circularity and solidity were then determined using widely accepted image analysis software (ImageJTM). Based on the data obtained from the imaging analysis, mathematical models were developed using the non-linear regression method. The developed mathematical models accurately predict the morphology of MLO-Y4 cells for different culture times and can, therefore, be used as a reference model for analyzing MLO-Y4 cell morphology changes within various biological/mechanical studies, as necessary.

Morphology of osteocyte cells in normal and hyper-gravity

Osteocyte cells are the most abundant cells in human bone tissue. Due to their unique morphology and location, osteocyte cells are thought to act as regulators in the bone remodelling process, and are believed to play an important role in astronauts’ bone mass loss after long-term space missions. There is increasing evidence showing that an osteocyte’s functions are highly affected by its morphology. However, changes in an osteocyte’s morphology under an altered gravity environment are still not well documented. Several in vitro studies have been recently conducted to investigate the morphological response of osteocyte cells to the microgravity environment, where osteocyte cells were cultured on a two-dimensional flat surface for at least 24 hours before microgravity experiments. Morphology changes of osteocyte cells in microgravity were then studied by comparing the cell area to 1g control cells. However, osteocyte cells found in vivo are with a more 3D morphology, and both cell body and dendritic processes are found sensitive to mechanical loadings. A round shape osteocyte’s cells support a less stiff cytoskeleton and are more sensitive to mechanical stimulations compared with flat cellular morphology. Thus, the relative flat and spread shape of isolated osteocytes in 2D culture may greatly hamper their sensitivity to a mechanical stimulus, and the lack of knowledge on the osteocyte’s morphological characteristics in culture may lead to subjective and noncomprehensive conclusions of how altered gravity impacts on an osteocyte’s morphology. Through this work empirical models were developed to quantitatively predicate the changes of morphology in osteocyte cell lines (MLO-Y4) in culture, and the response of osteocyte cells, which are relatively round in shape, to hyper-gravity stimulation has also been investigated. The morphology changes of MLO-Y4 cells in culture were quantified by measuring cell area and three dimensionless shape features including aspect ratio, circularity and solidity by using widely accepted image analysis software (ImageJTM). MLO-Y4 cells were cultured at low density (5×103 per well) and the changes in morphology were recorded over 10 hours. Based on the data obtained from the imaging analysis, empirical models were developed using the non-linear regression method. The developed empirical models accurately predict the morphology of MLO-Y4 cells for different culture times and can, therefore, be used as a reference model for analysing MLO-Y4 cell morphology changes within various biological/mechanical studies, as necessary. The morphological response of MLO-Y4 cells with a relatively round morphology to hyper-gravity environment has been investigated using a centrifuge. After 2 hours culture, MLO-Y4 cells were exposed to 20g for 30mins. Changes in the morphology of MLO-Y4 cells are quantitatively analysed by measuring the average value of cell area and dimensionless shape factors such as aspect ratio, solidity and circularity. In this study, no significant morphology changes were detected in MLO-Y4 cells under a hyper-gravity environment (20g for 30 mins) compared with 1g control cells.

Elämää suuremmat sankarittaret : Suomalaisen teatterin elämäkerralliset taiteilijahahmot vuosina 2000 - 2010

In the first decade of the 21st century, national notables were a significant theme in the Finnish theatre. The lives of artists, in particular, inspired the performances that combined historical and fictional elements. In this study, I focus on the characters of female artists in 18 Finnish plays or performances from the first decade of the 21st century. The study pertains to the field of performance analysis. I approach the characters from three points of view. Firstly, I examine them through the action of performances at the thematic level. Secondly, I concentrate on the forms of relationships between the audience and the half-historical character. Thirdly, I examine the representations of characters and their relationships to the audience using myth as a tool. I approach characters from the frame of feminist phenomenological theatre study but also combine the points of view of other traditions. As a model, I adapt the approach of the theatre researcher Bert O. States, which concentrates on the relation between a play s text and an actor, and between an actor and the public. Furthermore, I use the analysing tools of performance art in an examination of performances counted among the contemporary performance genre. The biographical plays about these artists are concentrated in the domestic sphere and take part in the conversation about the position of women in both the community and private life. They represent the heroines work, love, temptations and hardships. The artists do not carry out heroic acts, being more like everyday heroines whose lives and art were shared with the audience in an aphoristic atmosphere. In the examined performances, criticism of the heterosexual matrix was mainly conservative and the myths of female and male artists differed from each other: the woman artist was presented as a super heroine whose strength often meant sacrifices; the male artist was a weaker figure primarily pursuing his individualistic objectives. The performances proved to be a kind of documentary theatre, a hybrid of truth and fiction. Nonetheless, the constructions of subject and identity mainly represented the characters of the mythical stories and only secondarily gave a faithful rendition of the artists lives. Although these performances were addressed to the general and heterogeneous public, their audience proved to be a strictly predefined group, for which the national myths and the experience of a collective identity emerged as an important theme. The heroine characters offered the audience "safe" idols who ensured the solidity of the community. These performances contained common, shared values and gave the audience an opportunity to feel empathy and to be charmed by the confessions of well-known national characters.

Aerodynamics of vertical-axis wind turbines in full-scale and laboratory-scale experiments

Within a wind farm, multiple turbine wakes can interact and have a substantial effect on the overall power production. This makes an understanding of the wake recovery process critically important to optimizing wind farm efficiency. Vertical-axis wind turbines (VAWTs) exhibit features that are amenable to dramatically improving this efficiency. However, the physics of the flow around VAWTs is not well understood, especially as it pertains to wake interactions, and it is the goal of this thesis to partially fill this void. This objective is approached from two broadly different perspectives: a low-order view of wind farm aerodynamics, and a detailed experimental analysis of the VAWT wake.

One of the contributions of this thesis is the development of a semi-empirical model of wind farm aerodynamics, known as the LRB model, that is able to predict turbine array configurations to leading order accuracy. Another contribution is the characterization of the VAWT wake as a function of turbine solidity. It was found that three distinct regions of flow exist in the VAWT wake: (1) the near wake, where periodic blade shedding of vorticity dominates; (2) a transition region, where growth of a shear-layer instability occurs; (3) the far wake, where bluff-body oscillations dominate. The wake transition can be predicted using a new parameter, the dynamic solidity, which establishes a quantitative connection between the wake of a VAWT and that of a circular cylinder. The results provide insight into the mechanism of the VAWT wake recovery and the potential means to control it.

Análise técnica do uso de resíduos de poli (tereftalato de etileno) (PET) na indústria têxtil

O aumento no volume de rejeitos industriais e a contínua produção de resíduos de naturezas diversas causam muitas preocupações no âmbito ambiental. Neste contexto, o descarte de embalagens e garrafas de poli(tereftalato de etileno) (PET) tem se tornado um grande problema por conta da pequena atenção que se dá à sua destinação final. Assim sendo, essa pesquisa propõe a análise técnica da utilização de resíduos de PET, oriundos de reciclagem primária, como matéria-prima para a indústria têxtil. Fios de PET reciclado foram comparados aos fios comerciais de poliéster através de diversos ensaios como, por exemplo, resistência à tração e ensaios para solidificação da cor. Ao mesmo tempo, a microscopia eletrônica de varredura (MEV) foi usada para a investigação da morfologia dos fios e melhor interpretação dos resultados. Pôde ser verificado que os fios de PET reciclado apresentam satisfatório desempenho, embora a resistência mecânica e a solidez a cor à luz sejam inferiores àquelas dos fios convencionais de poliéster.

Se(r) um leitor em um ambiente virtual e aprendizagem: a utilização do insólito como estratégia de leitura e escrita no ensino superior

Este trabalho relata as estratégias e atividades realizadas em disciplinas semipresenciais desenvolvidas durante os períodos letivos de 2008 a 2012 com alunos dos cursos de Administração e de Ciências Contábeis, no ambiente virtual de aprendizagem Moodle. As disciplinas foram desenvolvidas segundo os princípios das abordagens colaborativas de aprendizagem com o objetivo de examinar as possibilidades de uso dos insólitos como estratégia de leitura e escrita. Buscou-se ainda apontar a aplicabilidade das estratégias didáticas descritas como forma de aprimorar as competências de leitura e escrita em alunos ingressantes no ensino superior e fornecer subsídios para a continuação da pesquisa. O trabalho mantém uma relação interdiscursiva com a obra Se um Viajante numa Noite de Inverno, de ítalo Calvino (1982), o que lhe possibilita não somente a titulação dos capítulos, mas também a construção sutil de uma presença que os perpassa. Do autor, retira também seis propostas ( leveza, rapidez, exatidão, visibilidade, multiplicidade e consistência) capazes de aprimorar a qualidade da comunicação em ambientes informáticos. Busca, ainda, na produção teórica de Michael Serres, um conceito singular de comunicação, algo capaz de transcender a substancialidade e de compreender e estimular a construção da presencialidade por meio de trocas e relações em ambientes virtuais de aprendizagem. Em vista disso, a pesquisa apoia-se na construção -reflexão- reconstrução de oficinas on-line que utilizam o insólito - concebido como algo surpreendente e propiciador de desestabilização - na construção de estratégias propiciadoras de aprimoramento da leitura e da produção textual de estudantes universitários. Recorre também às pesquisas desenvolvidas por Mikhail Bakhtin, Ângela Kleiman, Carla Coscarelli e Vilson Leffa, contribuições decisivas tanto na elaboração das oficinas on-line, quanto na reflexão que se tece ao longo da pesquisa. Por fim, busca apoio nos estudos sobre Estilos de Aprendizagem e na aplicação do Teste de Cloze para o aprimoramento das reflexões construídas

Avaliação de imagens através de Similaridade Estrutural e do conceito de Mínima Diferença de Cor Perceptível.

A avaliação objetiva da qualidade de imagens é de especial importância em diversas aplicações, por exemplo na compressão de imagens, onde pode ser utilizada para regular a taxa que deve ser empregada para que haja a máxima compressão (permitindo perda de dados) sem comprometer a qualidade final; outro exemplo é na inserção de marcas dágua, isto é, introdução de informações descritivas utilizadas para atestar a autenticidade de uma imagem, que devem ser invisíveis para o observador. O SSIM (Structural SIMilarity) é uma métrica de avaliação objetiva da qualidade de imagens de referência completa projetada para imagens em tons de cinza. Esta dissertação investiga sua aplicação na avaliação de imagens coloridas. Para tanto, inicialmente é feito um estudo do SSIM utilizando quatro diferentes espaços de cores RGB, YCbCr, Lαβ e CIELAB. O SSIM é primeiramente calculado nos canais individuais desses espaços de cores. Em seguida, com inspiração no trabalho desenvolvido em (1) são testadas formas de se combinar os valores SSIM obtidos para cada canal em um valor único os chamados SSIM Compostos. Finalmente, a fim de buscar melhores correlações entre SSIM e avaliação subjetiva, propomos a utilização da mínima diferença de cor perceptível, calculada utilizando o espaço de cores CIELAB, conjuntamente com o SSIM. Para os testes são utilizados três bancos de dados de imagens coloridas, LIVE, IVC e TID, a fim de se conferir consistência aos resultados. A avaliação dos resultados é feita utilizando as métricas empregadas pelo VQEG (Video Quality Experts Group) para a avaliação da qualidade de vídeos, com uma adaptação. As conclusões do trabalho sugerem que os melhores resultados para avaliação da qualidade de imagens coloridas usando o SSIM são obtidas usando os canais de luminância dos espaços de cores YCbCr, Lαβ e especialmente o CIELAB. Também se concluiu que a utilização da mínima diferença de cor perceptível contribui para o melhoramento dos resultados da avaliação objetiva.

Prognosis of underground structures deterioration based on in-situ measurements

The stability of the underground structure is very important not only from the point of view of the structure itself, but also from the point of view of other structures. Therefore, the evaluation of the process of deterioration can help us very much. In the first part of the paper the ageing of the structures in the scope of their life cycle will be described. The whole process of deterioration is important but limited to certain time intervals and is able to give signals about changes in macro-scale. The second part of the paper is focused on the adaptation of new methods: micro technology of monitoring - such as MEMS (Micro Electrical Mechanical Systems) and wireless technologies for data transfer. It is obvious that such new technologies have to be assessed for the ability to deliver data continuously and for their safety and solidity. At the end of the paper the application of the measurements on the Prague metro's lining is mentioned. © 2007 Taylor & Francis Group.

Criterion of aerodynamic performance of large-scale offshore horizontal axis wind turbines

With the background of offshore wind energy projects, this paper studies aerodynamic performance and geometric characteristics of large capacity wind turbine rotors ( 1 to 10 MW), and the main characteristic parameters such as the rated wind speed, blade tip speed, and rotor solidity. We show that the essential criterion of a high-performance wind turbine is a highest possible annual usable energy pattern factor and a smallest possible dimension, capturing the maximum wind energy and producing the maximum annual power. The influence of the above-mentioned three parameters on the pattern factor and rotor geometry of wind turbine operated in China's offshore meteorological environment is investigated. The variation patterns of aerodynamic and geometric parameters are obtained, analyzed, and compared with each other. The present method for aerodynamic analysis and its results can form a basis for evaluating aerodynamic performance of large-scale offshore wind turbine rotors.

不同林龄植被培肥改良土壤效益研究

在黄土丘陵沟壑区森林植被能够明显改善生态环境 ,防止土地退化 ,提高土壤中有机质、速效氮和速效钾的含量 ,降低土壤pH和容重 ;快速显著地增加土体中 >0 .2 5mm水稳性团聚体和 >5 0 μm微团粒的数量 ,使土壤结构改善 ,协调供应养分和水分的能力提高 ;能促进黏粒形成 ,坚实度增加 ,土壤的抗蚀性和抗冲性提高 ,有效地减少水土流失。植被对土壤的培肥改良是一种正向持续反馈机制 ,时间越长 ,效益越显著