Secagem de misturas de polpa de frutas tropicais em leito de jorro

Drying of fruit pulps in spouted beds of inert particles has been indicated as a viable technique to produce fruit powders. Most of the processes employed to produce dried fruit pulps and juices, such as Foam Mat, encapsulation by co-crystallization and spray drying utilize adjuvant and additives (such as thickeners, coating materials, emulsifiers, acidulants, flavors and dyes), which is not always desirable. The fruit pulp composition exerts an important effect on the fruit powder production using a spouted bed. In the study by Medeiros (2001) it was concluded that lipids, starch and pectin contents play an important role on the process performance, enhancing the powder production; however, the drying of fruit pulps containing high content of reducing sugars (glucose and fructose) is practically unviable. This work has the objective of expanding the studies on drying of fruit pulps in spouted bed with aid of adjuvant (lipids, starch and pectin) aiming to enhance the dryer performance without jeopardizing the sensorial quality of the product. The optimum composition obtained by Medeiros (2001) was the basis for preparing the mixtures of pulps. The mixture formulations included pulps of mango (Mangifera indica), umbu (Spondias tuberosa) and red mombin (Spondia purpurea) with addition of cornstarch, pectin and lipids. Different products were used as lipids source: olive and Brazil nut oils, coconut milk, heavy milk, powder of palm fat and palm olein. First of all, experiments were conducted to define the best formulation of the fruit pulps mixture. This definition was based on the drying performance obtained for each mixture and on the sensorial characteristics of the dry powder. The mixture formulations were submitted to drying at fixed operating conditions of drying and atomizing air flow rate, load of inert particles, temperature and flow rate of the mixture. The best results were obtained with the compositions having powder of palm fat and palm olein in terms of the drying performance and sensorial analysis. Physical and physicochemical characteristics were determined for the dry powders obtained from the mixtures formulations. Solubility and reconstitution time as well as the properties of the product after reconstitution were also evaluated. According to these analyses, the powder from the mixtures formulations presented similar characteristics and compatible quality to those produced in other types of dryers. Considering that the palm olein is produced in Brazil and that it has been used in the food industry substituting the palm fat powder, further studies on drying performance were conducted with the composition that included the palm olein. A complete factorial design of experiments 23, with three repetitions at the central point was conducted to evaluate the effects of the air temperature, feeding flow rate and intermittence time on the responses related to the process performance (powder collection efficiency, material retained in the bed and angle of repose of the inert particles after the process) and to the product quality (mean moisture content, loss of vitamin C and solubility). Powder production was uniform for the majority of the experiments and the higher efficiency with lower retention in the bed (59.2% and 1.8g, respectively) were obtained for the air temperature of 80°C, mixture feed rate of 5ml/min in intervals of 10 min. The statistical analysis of the results showed that the process variables had individual or combined significant influences on the powder collection efficiency, material retention in the bed, powder moisture content and loss of vitamin C. At the experimental ranges of this work, the angle of repose and solubility were not influenced by the operating variables. From the results of the experimental design, statistical models were obtained for the powder moisture content and loss of vitamin C

Secagem de misturas de polpa de frutas tropicais em leito de jorro

Drying of fruit pulps in spouted beds of inert particles has been indicated as a viable technique to produce fruit powders. Most of the processes employed to produce dried fruit pulps and juices, such as Foam Mat, encapsulation by co-crystallization and spray drying utilize adjuvant and additives (such as thickeners, coating materials, emulsifiers, acidulants, flavors and dyes), which is not always desirable. The fruit pulp composition exerts an important effect on the fruit powder production using a spouted bed. In the study by Medeiros (2001) it was concluded that lipids, starch and pectin contents play an important role on the process performance, enhancing the powder production; however, the drying of fruit pulps containing high content of reducing sugars (glucose and fructose) is practically unviable. This work has the objective of expanding the studies on drying of fruit pulps in spouted bed with aid of adjuvant (lipids, starch and pectin) aiming to enhance the dryer performance without jeopardizing the sensorial quality of the product. The optimum composition obtained by Medeiros (2001) was the basis for preparing the mixtures of pulps. The mixture formulations included pulps of mango (Mangifera indica), umbu (Spondias tuberosa) and red mombin (Spondia purpurea) with addition of cornstarch, pectin and lipids. Different products were used as lipids source: olive and Brazil nut oils, coconut milk, heavy milk, powder of palm fat and palm olein. First of all, experiments were conducted to define the best formulation of the fruit pulps mixture. This definition was based on the drying performance obtained for each mixture and on the sensorial characteristics of the dry powder. The mixture formulations were submitted to drying at fixed operating conditions of drying and atomizing air flow rate, load of inert particles, temperature and flow rate of the mixture. The best results were obtained with the compositions having powder of palm fat and palm olein in terms of the drying performance and sensorial analysis. Physical and physicochemical characteristics were determined for the dry powders obtained from the mixtures formulations. Solubility and reconstitution time as well as the properties of the product after reconstitution were also evaluated. According to these analyses, the powder from the mixtures formulations presented similar characteristics and compatible quality to those produced in other types of dryers. Considering that the palm olein is produced in Brazil and that it has been used in the food industry substituting the palm fat powder, further studies on drying performance were conducted with the composition that included the palm olein. A complete factorial design of experiments 23, with three repetitions at the central point was conducted to evaluate the effects of the air temperature, feeding flow rate and intermittence time on the responses related to the process performance (powder collection efficiency, material retained in the bed and angle of repose of the inert particles after the process) and to the product quality (mean moisture content, loss of vitamin C and solubility). Powder production was uniform for the majority of the experiments and the higher efficiency with lower retention in the bed (59.2% and 1.8g, respectively) were obtained for the air temperature of 80°C, mixture feed rate of 5ml/min in intervals of 10 min. The statistical analysis of the results showed that the process variables had individual or combined significant influences on the powder collection efficiency, material retention in the bed, powder moisture content and loss of vitamin C. At the experimental ranges of this work, the angle of repose and solubility were not influenced by the operating variables. From the results of the experimental design, statistical models were obtained for the powder moisture content and loss of vitamin C

Estudo da secagem de polpa de coco verde em leito de jorro e viabilidade de sua utilização na indústria

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE

Influência de encapsulantes e do método de secagem nas propriedades físico-químicas e atributos de qualidade de polpa de maracujá (Passifora edulis f. flavicarpa)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Composição de ácidos graxos em polpa de frutas nativas do cerrado

Dentre as fruteiras do Cerrado brasileiro com forte potencial para a exploração sustentada, encontram-se o araticum (Annona Crassiflora Mart.), o coquinho-azedo (Butia Capitata Mart.) e o pequi (Caryocar Brasiliense Camb.). O objetivo deste trabalho foi caracterizar o teor de óleo e o perfil de ésteres metílicos da fração lipídica da polpa dos frutos destas três espécies. Os teores de lipídeos foram determinados por extração contínua a quente com éter de petróleo em extrator tipo Soxhlet. O óleo para perfil de ésteres metílicos foi extraído a frio por Bligh e Dyer e caracterizado por cromatografia a gás, usando detector de ionização de chama. A polpa de pequi apresentou elevados teores de óleo, em média 30,89 %; as polpas de araticum e coquinho-azedo apresentaram, respectivamente, médias de 2,14 e 2,73 % de óleo. Os ácidos graxos oleico e palmítico predominaram nas três espécies, e todas apresentaram prevalência de ácidos graxos insaturados, sendo a maior concentração encontrada no araticum (78,3 %), seguida pelo coquinho-azedo (63,3 %). A polpa de araticum e de coquinho-azedo apresentaram elevados teores de ácido linolênico (2,5 a 3,7%). A presença de ésteres metílicos de ácido caproico parece estar associada à percepção do aroma frutal típico destas frutas do Cerrado.

Estudo da influência da proporção de um mix leite/popa da marcacujá na produção de pó obtido por três diferentes tipos de secagem

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Construção e desenvolvimento de um secador de leito pulso-fluidizado para secagem de pastas e polpas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação da secagem do bagaço de cajá usando planejamento fatorial composto central

This work deals with the kinetics assay of Cajá (Spondias mombin L.) bagasse drying by an experimental design using a tray dryer. In order to add-value to this product a kinetic study has been carried out. A central composite experimental design has been carried out to evaluate the influence of the operational variables: input air temperature (55; 65 e 75ºC); the drying air velocity (3.2; 4.6 e 6.0 m/s) and the fixed bed thickness (0.8; 1.2 e 1.6 cm) and as response variable the the moisture content (dry basis). The results showed that the diffusional Fick model fitted quite well the experimental data. The best condition found has been input air temperature of 75ºC, drying air velocity of 6.0 m/s as well as fixed bed thickness of 0.8 cm. The experimental design assay showed that the main effects as well as the second ones were significant at 95% confindance level. The best operational condition according to statistical planning was 75 oC input air temperature, 6.0 m.s-1 drying air velocity and 0.8 cm fixed bed thickness. In this case, the equilibrium moisture content (1.3% dry basis) occured at 220 minutes

Desidratação de polpa de manga em leito de espuma com e sem intermitência térmica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Escoamento de ar através de embalagens de polapa de frutas em caixas comerciais: efeito sobre os perfis de velocidade em túneis de congelamento

As variações nas velocidades do ar causadas pela resistência ao escoamento em função da quantidade de embalagens de polpa de frutas (100g), acondicionadas em caixas comerciais durante o processo de congelamento, foram avaliadas e as vazões estimadas, com base em um método de tratamento dos dados experimentais. As velocidades foram medidas antes da passagem do ar pelo empilhamento de caixas na câmara. As medições foram analisadas utilizando-se uma rotina de regressão não linear e as vazões determinadas pelo método de integração numérica dos perfis das velocidades ajustadas. O método apresentou estimação 10% superior à encontrada pelo método tradicional. Mantendo as condições operacionais do ventilador constantes, a vazão para arranjos de sete camadas resultou ser 62% inferior à de três camadas e, 50,9% inferior à de cinco camadas. Estes valores foram proporcionais à redução do espaço livre para escoamento do ar.

Estudo da vida-de-prateleira de fruta estruturada e desidratada obtida de polpa concentrada de mamão

A fruta estruturada contendo polpa concentrada de mamão (700 g/kg), sacarose (340 g/kg), alginato de sódio (7 g/kg), pectina de baixa metoxilação (7 g/kg) e glicerol (50 g/kg), cortada no formato cilindro sólido (vol. aprox. 2 cm³), desidratada (12% umidade), com cobertura de açúcar impalpável, foi utilizada no estudo de vida-de-prateleira. Foram realizadas análises físicas, químicas, sensoriais e microbiológicas no produto devidamente acondicionado em sacos de filme multilaminado, para acompanhar a evolução da perda de qualidade do produto armazenado a 0, 25 e 35 °C, durante 120 dias. Os resultados mostraram que a firmeza objetiva e as avaliações subjetivas da textura e qualidade global, foram as que melhor identificaram a queda na qualidade da fruta estruturada durante a estocagem. Na condição acelerada (35 °C), o produto foi considerado próprio para consumo até 56 dias de armazenamento, quando atingiu a nota 4,5 (não gostei/nem desgostei) da escala de qualidade global do teste sensorial. Os dados cinéticos, Ea = 19,89 kcal/mol e Q10 = 3, estabelecidos no teste acelerado, permitiram estimar o limite da vida útil em 168 dias para o produto armazenado a 25 °C. Em condições normais de armazenamento, estimam-se 154 dias de vida útil com base na equação da qualidade global dos resultados sensoriais.

Comportamento reológico de sistemas pécticos de polpas de frutas vermelhas

Neste trabalho, o comportamento reológico de sistemas pécticos formulados com as pectinas extraídas das polpas de morango, amora-preta e framboesa foi investigado através de testes reológicos oscilatórios. Adicionalmente, as propriedades químicas dessas pectinas foram estudadas. Os sistemas pécticos das polpas de frutas vermelhas apresentaram um caráter de gel forte de acordo com os testes reológicos, sendo o gel de morango caracterizado como o mais forte. Os testes reológicos foram confirmados pelo experimento de Cox-Merz, grau de esterificação e peso molecular médio. O ácido galacturônico está diretamente relacionado com a formação da rede de pectina. Além disso, a diferença entre a força dos três géis pécticos pode ser atribuída aos valores do grau de esterificação e peso molecular médio desses biopolímeros. As pectinas extraídas das frutas vermelhas estudadas neste trabalho podem ser classificadas como pectinas de alta metoxilação, apresentado o grau de esterificação maior que 50%. Os três géis pécticos apresentaram uma boa estabilidade ao aumento da temperatura e ao tempo de cisalhamento oscilatório constante.

Qualidade microbiológica e ocorrência de leveduras em polpas congeladas de frutas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Sacarificação da polpa cítrica por hidrólise ácida e cultivo pelo processo de batelada simples com reciclo de Trichoderma reesei ou Aspergillus niger com produção de celulases e poligalacturonases

Pós-graduação em Microbiologia - IBILCE

Avaliação da polpa cítrica peletizada como aditivo no processo de ensilagem dos capins Tanzânia e Marandu

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)