Comparative leaf anatomy and morphology of some neotropical Rutaceae: Pilocarpus Vahl and related genera

Previous anatomical studies have been restricted to the foliar aspects of Pilocarpus. However, no anatomical studies analyzing the foliar aspects of Pilocarpus in relation to related genera have been carried out. Therefore, the aim of this study was to identify characters for future taxonomic and phylogenetic studies in Rutaceae, particularly in Pilocarpus, and to discuss the characteristics associated with the simple or compound leaf condition for the group. The petiole and the leaf blade of 14 neotropical Rutaceae species were analyzed, and the following characteristics were observed in all leaves studied: stomata on both surfaces; secretory cavities, including mesophyll type; camptodromous-brochidodromous venation pattern; and free vascular cylinder in the basal region of the petiole. Additional promising characters were identified for future taxonomic and phylogenetic studies in the Rutaceae family, especially for the Pilocarpus genera.

浙江嵊州早上新世植物群重建和古气候定量研究

上新世时期是地球环境发展变化过程中由温暖的中新世向冰期-间冰期交替出现的更新世的过渡时期，研究上新世的气候有助于研究现代全球气候变化趋势。我国上新世植物群研究不多，尤其缺乏早上新世植物群的研究。在研究化石植物群的过程中，叶角质层的信息通常被忽视。迄今，我国古气候的定量研究主要集中在山东山旺和云南地区，研究的主要是中新世和晚上新世的古气候，早上新世气候的定量研究国内外都未见报道。 本论文以采自浙江中部嵊州地区硅藻土中的植物叶和果实为材料，通过光学显微镜、荧光显微镜和扫描电镜观察，对提取的化石叶角质层和叶结构进行研究，对比研究现代相关类群植物的叶片，确定了化石植物类群计15科24属（或亚科）34种。同时参照现代植物分布，恢复了早上新世嵊州地区古植被情况，进一步运用共存分析（Co-existence Approch）定量重建了当时的古气候，得到古年均温、古年较差和古年降水量等7个参数。 研究表明，叶结构和叶角质层可以应用于化石植物类群的鉴定。光学显微镜和荧光显微镜下可以获得的信息有：气孔、表皮细胞形状及大小、表皮细胞垂周壁、分泌结构、表皮毛或毛基等。扫描电镜观察的是叶表皮细胞表面的情况，如细胞外壁是否被蜡质以及蜡质的交结情况，气孔外壁是否增厚呈环等。 经化石植物类群鉴定，早上新世（约4Ma）嵊州地区植被属亚热带常绿阔叶林。推测：该地区当时存在一个较大的湖泊，湖泊边缘水中生长有菱角，湖泊周边可能有海拔超过1400m的山地。 常绿阔叶林主要成分是壳斗科植物，其中青冈属植物可能是建群植物。自低海拔到高海拔地区都有分布的是：栎属、栗属、桤木属植物，青杨梅。低海拔地区（<600m）分布的植物有：海南锥，樟。中低海拔地区（300-1000m）分布着：柯属、黄杨属植物，水青冈，海南油丹，江南油杉，福建柏。中高海拔地区（>700m）分布有：高山栎、黄肉楠属植物，米心水青冈，榉树，建始槭，天台鹅耳枥和昌化鹅耳枥。除了上述类群，林中还散布着鼠李属、杜鹃花属和冬青属的植物，豆科崖豆藤属植物则缠绕一些较大乔木生长。另外，在一些土壤、有机质易堆积的洼地生长有竹林，山地贫瘠的地方生长着柏属植物。 嵊州早上新世化石植物群反映的植被同浙江地区现代植被相似。第三纪浙江地区从针叶林或阔叶树为主的针-阔叶混交林过渡到常绿-落叶阔叶林，再发展为常绿阔叶林。 依据23个植物类群分析获得7个古气候参数：年均温17.7-21.4°C，最热月均温22.2-27°C，最冷月均温8.4-13.4°C，年较差12.1-15.3°C，年降水量1136-1869.9mm，最大月降水量211.8-283.3mm，最小月降水量20.3-36.8mm。 对比现代嵊州地区气候参数，早上新世嵊州地区年降水量略高于现代，年均温比现代高1.3-5°C，年较差为12.1-15.3°C。早上新世期嵊州地区四季气温比现代平稳。

钻地风属和冠盖藤属（虎耳草科）的分类学修订

钻地风属（Schizophragma Siebold & Zucc.）和冠盖藤属（Pileostegia Hook. f. & Thomson）隶属于虎耳草科绣球花亚科绣球花族植物，分布于东亚。本论文对钻地风属和冠盖藤属进行了全面的分类学研究：重点分析了钻地风属和冠盖藤属各形态性状的变异式样，确定了二属的性状变异范围;在光学显微镜下，对钻地风属中6种5变种和冠盖藤属中2种共130份材料的叶表皮特征进行了深入、全面的观察和研究;并对二属的叶脉序特征进行了研究。结果显示，苞片存在与否、不育花存在与否、花瓣顶端是否联合、蒴果和种子的形状、叶片质地、生长习性、表皮细胞垂周壁加厚与否、气孔器分布、类型、气孔大小、保卫细胞轮廓、外拱盖是否双层、二级脉、三级脉、高级脉及网眼等特征在属的水平上具有重要的分类学意义，这些性状特征支持将钻地风属和冠盖藤属作为两个独立的属处理。根据形态性状及叶脉序特征推测，冠盖藤属较原始，钻地风属较进化。在钻地风属中，叶片毛被的有无及类型、叶片形状和叶缘的形状等特征可作为可靠的分种依据;叶表皮特征在种及种下等级具有重要的分类学意义;叶脉序多呈现环节曲行羽状脉式样，二级脉具分枝，在种间存在细微差别。根据形态性状及叶脉序特征推测，厚叶钻地风S. crassum Hand.-Mazz.和白背钻地风S. hypoglaucum Rehder可能为钻地风属中较原始的类群，秦榛钻地风S. corylifolium Chun和绣球钻地风S. hydrangeoides Siebold & Zucc.可能较进化。在冠盖藤属中，叶片毛被的有无及类型、叶片形状等特征可作为可靠的分种依据;该属中叶表皮特征相似，2个种间叶表皮特征无差异;叶脉序多呈现环节曲行羽状脉式样，二级脉无分枝，在种间差异极小。 作者在研究了近2000份腊叶标本的基础上，结合叶表皮特征和叶脉序特征，认为钻地风属和冠盖藤属为两个独立的属。首次对钻地风属和冠盖藤属进行了世界性的分类学修订，确认钻地风属含7个种、5个变种，冠盖藤属含2个种。对钻地风属中的5个名称和冠盖藤属中的2个名称进行了归并;为钻地风属中的1个名称和冠盖藤属中的2个名称指定了后选模式;发现被命名为维西钻地风S. crassum Hand.-Mazz. var. hsitaoianum (Chun) C. F. Wei的类群其正确名称为S. crassum Hand.-Mazz. var. ellipticum J. Anthony;恢复了变种小粉绿钻地风S. integrifolium Oliv. var. minus Rehder;重新界定了白背钻地风和小粉绿钻地风的变异范围，澄清了中国文献中记载的粉绿钻地风S. integrifolium Oliv. var. glaucescens Rehder长期存在的名实混乱问题。本论文对各个分类群进行了详细的形态描述，给出了分种检索表，并附分布资料及地理分布图。

Epiderme e padrão de venação foliar de espécies de Lauraceae

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Vascularização foliar e a identificação de espécies de Eugenia L. (Myrtaceae) da bacia hidrográfica do Rio Tibagi, PR

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Vascularização foliar e anatomia do pecíolo de Melastomataceae do cerrado do Estado de São Paulo, Brasil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Nervação foliar em espécies brasileiras de Myrtaceae Adans

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The utility of leaf flavonoids as taxonomic markers for some Malaysian species of the tribe Shoreae (Dipterocarpaceae)

A flavonoid survey was carried out on 45 taxa from the genera Shorea, Hopea, Parashorea, Neobalanocarpus, and Dryobalanops of the tribe Shoreae in the Dipterocarpaceae. The study showed significant chemotaxonomic differences in leaf flavonoid aglycone patterns and the presence of tannins in these taxa. The flavonoid patterns are useful in the delimitation of some taxa. For example, the genus Parashorea is distinguished by the universal presence of kaempferol 3-methyl ether, and the monotypic genus Neobalanocarpus is unique in not producing ellagic and gallo tannins. The presence of chalcones and flavone C-glycosides supports the separation of the genus Hopea into two sections, section Dryobalanoides and section Hopea in Ashton's classification, which is based on the type of venation. The flavonoid distributions in this study show that they can be very useful for differentiating between the Balau group in the genus Shorea, and some scaly barked Hopea species, particularly H. helferi (lintah bukit), H. nutans (giam), and H. ferrea (malut). (C) 2008 The Linnean Society of London.

The utility of leaf flavonoids as taxonomic markers for some Malaysian species of the tribe Shoreae (Dipterocarpaceae)

A flavonoid survey was carried out on 45 taxa from the genera Shorea, Hopea, Parashorea, Neobalanocarpus, and Dryobalanops of the tribe Shoreae in the Dipterocarpaceae. The study showed significant chemotaxonomic differences in leaf flavonoid aglycone patterns and the presence of tannins in these taxa. The flavonoid patterns are useful in the delimitation of some taxa. For example, the genus Parashorea is distinguished by the universal presence of kaempferol 3-methyl ether, and the monotypic genus Neobalanocarpus is unique in not producing ellagic and gallo tannins. The presence of chalcones and flavone C-glycosides supports the separation of the genus Hopea into two sections, section Dryobalanoides and section Hopea in Ashton's classification, which is based on the type of venation. The flavonoid distributions in this study show that they can be very useful for differentiating between the Balau group in the genus Shorea, and some scaly barked Hopea species, particularly H. helferi (lintah bukit), H. nutans (giam), and H. ferrea (malut). (C) 2008 The Linnean Society of London.

Leaf and stem anatomy of Vochysiaceae in relation to subfamilial and suprafamilial systematics

Several leaf anatomical features are potentially systematically informative within both the family Vochysiaceae and the order Myrtales, notably tracheoidal idioblasts, mucilage cells and secretory canals. Tracheoids with spiral wall thickenings are present in the mesophyll of most species of Vochysia, and also occur in several other families of Myrtales. Mucilage cells are common in the leaf epidermis in some Vochysiaceae. Secretory ducts are present in the midrib in Salvertia and Vochysia, which are apparently closely related, although Salvertia also shares some leaf anatomical characters with Qualea and Callisthene. Anatomical data do not support the segregation of Ruizterania from Qualea; leaves of R. albiflora leaves are very similar to those of Q. paraensis in venation pattern, and leaf and stem anatomy. Different venation patterns are characteristic of sections within the genus Qualea, but within the large genus Vochysia, leaf anatomy is variable even within a subsection. Amongst other Myrtales, leaf anatomy of Vochysiaceae most closely resembles that of Combretaceae and Onagraceae. © 2002 The Linnean Society of London.

Modelling water droplet movement on a leaf surface

The central aim for the research undertaken in this PhD thesis is the development of a model for simulating water droplet movement on a leaf surface and to compare the model behavior with experimental observations. A series of five papers has been presented to explain systematically the way in which this droplet modelling work has been realised. Knowing the path of the droplet on the leaf surface is important for understanding how a droplet of water, pesticide, or nutrient will be absorbed through the leaf surface. An important aspect of the research is the generation of a leaf surface representation that acts as the foundation of the droplet model. Initially a laser scanner is used to capture the surface characteristics for two types of leaves in the form of a large scattered data set. After the identification of the leaf surface boundary, a set of internal points is chosen over which a triangulation of the surface is constructed. We present a novel hybrid approach for leaf surface fitting on this triangulation that combines Clough-Tocher (CT) and radial basis function (RBF) methods to achieve a surface with a continuously turning normal. The accuracy of the hybrid technique is assessed using numerical experimentation. The hybrid CT-RBF method is shown to give good representations of Frangipani and Anthurium leaves. Such leaf models facilitate an understanding of plant development and permit the modelling of the interaction of plants with their environment. The motion of a droplet traversing this virtual leaf surface is affected by various forces including gravity, friction and resistance between the surface and the droplet. The innovation of our model is the use of thin-film theory in the context of droplet movement to determine the thickness of the droplet as it moves on the surface. Experimental verification shows that the droplet model captures reality quite well and produces realistic droplet motion on the leaf surface. Most importantly, we observed that the simulated droplet motion follows the contours of the surface and spreads as a thin film. In the future, the model may be applied to determine the path of a droplet of pesticide along a leaf surface before it falls from or comes to a standstill on the surface. It will also be used to study the paths of many droplets of water or pesticide moving and colliding on the surface.

Modelling water droplet movement on a leaf surface

Modelling droplet movement on leaf surfaces is an important component in understanding how water, pesticide or nutrient is absorbed through the leaf surface. A simple mathematical model is proposed in this paper for generating a realistic, or natural looking trajectory of a water droplet traversing a virtual leaf surface. The virtual surface is comprised of a triangular mesh structure over which a hybrid Clough-Tocher seamed element interpolant is constructed from real-life scattered data captured by a laser scanner. The motion of the droplet is assumed to be affected by gravitational, frictional and surface resistance forces and the innovation of our approach is the use of thin-film theory to develop a stopping criterion for the droplet as it moves on the surface. The droplet model is verified and calibrated using experimental measurement; the results are promising and appear to capture reality quite well.