Liderazgo y poder

En este documento, el lector encontrará aspectos teóricos que le permitirán entender los conceptos de liderazgo y poder, mediante la inclusión de tópicos como la evolución y escenarios en los cuales éstos se han venido desarrollando. Con el fin de que el lector genere su propia configuración del líder, el trabajo contiene además la categorización y estilos de liderazgo y las fuentes y usos del poder. Conjuntamente se resaltará la labor del líder y el manejo de su poder dentro de las organizaciones desde un marco competitivo y global, teniendo en cuenta su efectividad, sus distinciones y diferentes manifestaciones. Además, se logra determinar la comunicación y visión del líder como un factor determinante en el entorno empresarial.

Leadership training and regular communication identified as key strategies for the development of the Australian pineapple industry

Changes in the circumstances of the Australian pineapple industry left growers with a leadership vacuum, limited technical support and no funds for conducting research and marketing. Inspirational leadership training together with regular district farm meetings were used to assist the Australian pineapple industry to successfully adapt to these challenges. All growers were assigned to one of a number of regional grower study groups and regular on-farm meetings commenced to facilitate communication between growers, transfer of technology, awareness of industry affairs and an opportunity to become involved in industry business. A leader was appointed within each study group and these leaders attended a leadership course consisting of three, three-day modules. These original course graduates formed the nucleus of a new grower representative group which subsequently instigated levies to fund research and marketing. Two more courses have since been conducted to provide the depth of leadership to satisfy the growers' desire to rotate industry leadership on a regular basis.

High-current adaptive impedance matching in narrowband power-line communication systems

This paper proposes a high current impedance matching method for narrowband power-line communication (NPLC) systems. The impedance of the power-line channel is time and location variant; therefore, coupling circuitry and the channel are not usually matched. This not only results in poor signal integrity at the receiving end, but also leads to a higher transmission power requirement to secure the communication process. To offset this negative effect, a high-current adaptive impedance circuit to enable impedance matching in power-line networks is reported. The approach taken is to match the channel impedance of N-PLC systems is based on the General Impedance Converter (GIC). In order to achieve high current a special coupler in which the inductive impedance can be altered by adjusting a microcontroller controlled digital resistor is demonstrated. It is shown that the coupler works well with heavy load current in power line networks. It works in both low and high transmitting current modes, a current as high as 760 mA has been obtained. Besides, compared with other adaptive impedance couplers, the advantages include higher matching resolution and a simple control interface. Experimental results are presented to demonstrate the operation of the coupler. © 2011 IEEE.

A power optimised narrowband power-line communication system

Narrowband Power-line Communication (NPLC) technology uses a narrow bandwidth to transmit information. Its major applications include control, smart home systems and security. This paper proposes a power optimised NPLC system to minimise its systemic power consumption without compromising its communication ability. By using the proposed Smart Energy Conservation Layer which reads the signal strength from the PLC channel, a power optimised system is achieved to provide the essential transmitting power to secure the communications. Compared to commercial systems, the potential power saving could be up to 99% in a household environment, as demonstrated by the experimental results. © 2013 IEEE.

Canadian Niagara Power Company fonds

Power at the Falls: The first recorded harnessing of Niagara Falls power was in 1759 by Daniel Joncairs. On the American side of the Falls he dug a small ditch and drew water to turn a wheel which powered a sawmill. In 1805 brothers Augustus and Peter Porter expanded on Joncairs idea. They bought the American Falls from New York State at public auction. Using Joncairs old site they built a gristmill and tannery which stayed in business for twenty years. The next attempt at using the Falls came in 1860 when construction of the hydraulic canal began by the Niagara Falls Hydraulic Power and Manufacturing Co. The canal was complete in 1861 and brought water from the Niagara river, above the falls, to the mills below. By 1881 the Niagara Falls Hydraulic Power and Manufacturing Co. had a small generating station which provided some electricity to the village of Niagara Falls and the Mills. This lasted only four years and then the company sold its assets at public auction due to bankruptcy. Jacob Schoellkopf arrived at the Falls in 1877 with the purchase of the hydraulic canal land and water and power rights. In 1879 Schoellkopf teamed up with Charles Brush (of Euclid Ohio) and powered Brush’s generator and carbon arc lights with the power from his water turbines, to illuminate the Falls electrically for the first time. The year 1895 marked the opening of the Adam No. 1 generating station on the American side. The station was the beginnings of modern electrical utility operations. The design and operations of the generating station came from worldwide competitions held by panels of experts. Some who were involved in the project include; George Westinghouse, J. Pierpont Morgan, Lord Kelvin and Nikoli Tesla. The plants were operated by the Niagara Falls Power Company until 1961, when the Robert Moses Plant began operation in Lewiston, NY. The Adams plants were demolished that same year and the site used as a sewage treatment plant. The Canadian side of the Falls began generating their own power on January 1, 1905. This power came from the William Birch Rankine Power Station located 500 yards above the Horseshoe Falls. This power station provided the village of Fort Erie with its first electricity in 1907, using its two 10,000 electrical horsepower generators. Today 11 generators produce 100,000 horsepower (75 megawatts) and operate as part of the Niagara Mohawk and Fortis Incorporated Power Group.

Niagara-Welland Power Company Limited fonds, 1833, 1852, 1904-1906, 1909, n.d.

The Welland Power and Supply Canal Company Limited, established in 1893 and incorporated in 1894 with a capital stock of $500,000. The aim of the company was to harness the natural water supply of the Niagara and Welland Rivers. In 1898 the Canadian Electrical News published a report by Henry Symons, QC outlining the main project of the company. This project involves the construction of a canal from the Welland River to the brow of the mountain at Thorold, a distance of 8 miles; the construction at Thorold of a power house, and from Thorold to Lake Ontario, a raceway by which to carry water into the lake. The estimate for the machinery to generate 100,000 horse power is £125,000; for transmission line to Toronto at a voltage of 10,000….The total estimate therefore amounts to £2,452,162, or roughly speaking, $12,000,000. Source: Canadian Electrical News, August 1898, p. 172. In 1899 the company officers petitioned the federal government desiring a name change to the Niagara-Welland Power Company Limited. Officers of the company were Harry Symons, President; Charles A. Hesson, Vice-President; and M.R. O’Loughlin, James B. Sheehan, James S. Haydon, Frederick K. Foster, directors; John S. Campbell, secretary-treasurer. The company’s head offices were located in St. Catharines, with a New York (City) office on Broad Street. In 1905 and 1909 the company petitioned the federal government for additional time to construct its works, which was granted. The company had until May 16, 1915 to complete construction. John S. Campbell (1860-1950) was a graduate of the University of Toronto and Osgoode Hall. During his university years John began his military career first in "K" Company, Queens Own rifles and then later as Commanding Officer of the 19th Lincoln Regiment, from 1906 to 1910. Upon his return to St. Catharines John Campbell served as secretary in the St. Catharines Garrison Club, a social club for military men begun in 1899. After being called to the Bar, he became a partner in the firm of Campbell and McCarron and was appointed to the bench in 1916, serving until retirement in 1934. Judge Campbell served as an alderman for several terms and was the mayor of St. Catharines in 1908 and 1909. He also served as the first chairman of the St. Catharines Public Utilities in 1914. John S. Campbell was married to Elizabeth Oille, daughter of Jerome B. and Charlotte (St. John) Oille. The family home "Cruachan" was located at 32 Church St.

Letter - William Lyon Mackenzie King (Deputy Minister of Labour) to The Niagara Power Company, 5 October 1903

A letter from William Lyon Mackenzie King to The Niagara Power Company in the year 1903. Mackenzie King is Deputy Minister of Labour for the Department of Labour Canada and in this letter he discusses issues with importing of men from the United States to Canada for employment. The letter warns of penalty if found guilty of unlawfully importing men for employment.

Statistics of Manufacturers for the year 1905 - Canadian Niagara Power Company

A census form for the year 1905. The form was approved by the Governor General in Council January 22, 1906.

Canadian Niagara Power Company - Water rushing through tunnel

Photograph of water rushing through hydro tunnel.

Canadian Niagara Power Company - Tunnel

Another photograph of several men walking through the tunnel.

Canadian Niagara Power Company - Large group photo in tunnel

Large group of men standing in the tunnel wearing boots and hard hats.

Canadian Niagara Power Company - Group in Tunnel

Group of men in the hydro tunnel with a loaded dolly and large lamp for light.

Canadian Niagara Power Company - Man in Tunnel

One male looking down tunnel.

Canadian Niagara Power Company - Water pouring into Tunnel

Three men looking down tunnel as water is pouring in.