The Creative Workforce : How to Launch Young People into High-Flying Futures

Creativity has become the economic engine of the 21st century. No longer the preserve of creative industries, 'creative capital' – in the form of novel thinking, navigation, interactivity and border-crossing – has become crucial to success and productivity. But are young people being equipped for a work future in which creativity is the defining feature of economic life? In this important book, Erica McWilliam argues that young people’s creative capacities are not being properly developed and that education, particularly in Australia, demands a massive pedagogical shift. Using both Australian and overseas examples, McWilliam describes what creative capacities are, why they've become important to our work futures, and what can be done to optimise the creative capacities of young people.

Deployment and connectivity repair of a sensor net with a flying robot

We consider multi-robot systems that include sensor nodes and aerial or ground robots networked together. Such networks are suitable for tasks such as large-scale environmental monitoring or for command and control in emergency situations. We present a sensor network deployment method using autonomous aerial vehicles and describe in detail the algorithms used for deployment and for measuring network connectivity and provide experimental data collected from field trials. A particular focus is on determining gaps in connectivity of the deployed network and generating a plan for repair, to complete the connectivity. This project is the result of a collaboration between three robotics labs (CSIRO, USC, and Dartmouth). © Springer-Verlag Berlin/Heidelberg 2006.

Networked robots : flying robot navigation using a sensor net

This paper introduces the application of a sensor network to navigate a flying robot. We have developed distributed algorithms and efficient geographic routing techniques to incrementally guide one or more robots to points of interest based on sensor gradient fields, or along paths defined in terms of Cartesian coordinates. The robot itself is an integral part of the localization process which establishes the positions of sensors which are not known a priori. We use this system in a large-scale outdoor experiment with Mote sensors to guide an autonomous helicopter along a path encoded in the network. A simple handheld device, using this same environmental infrastructure, is used to guide humans.

Flying-capacitor-based chopper circuit for DC capacitor voltage balancing in diode-clamped multilevel inverter

This paper proposes a flying-capacitor-based chopper circuit for dc capacitor voltage equalization in diode-clamped multilevel inverters. Its important features are reduced voltage stress across the chopper switches, possible reduction in the chopper switching frequency, improved reliability, and ride-through capability enhancement. This topology is analyzed using three- and four-level flying-capacitor-based chopper circuit configurations. These configurations are different in capacitor and semiconductor device count and correspondingly reduce the device voltage stresses by half and one-third, respectively. The detailed working principles and control schemes for these circuits are presented. It is shown that, by preferentially selecting the available chopper switch states, the dc-link capacitor voltages can be efficiently equalized in addition to having tightly regulated flying-capacitor voltages around their references. The various operating modes of the chopper are described along with their preferential selection logic to achieve the desired performances. The performance of the proposed chopper and corresponding control schemes are confirmed through both simulation and experimental investigations.

Static shunt and series compensations of an SMIB system using flying capacitor multilevel inverter

The flying capacitor multilevel inverter (FCMLI) is a multiple voltage level inverter topology intended for high-power and high-voltage operations at low distortion. It uses capacitors, called flying capacitors, to clamp the voltage across the power semiconductor devices. A method for controlling the FCMLI is proposed which ensures that the flying capacitor voltages remain nearly constant using the preferential charging and discharging of these capacitors. A static synchronous compensator (STATCOM) and a static synchronous series compensator (SSSC) based on five-level flying capacitor inverters are proposed. Control schemes for both the FACTS controllers are developed and verified in terms of voltage control, power flow control, and power oscillation damping when installed in a single-machine infinite bus (SMIB) system. Simulation studies are performed using PSCAD/EMTDC to validate the efficacy of the control scheme and the FCMLI-based flexible alternating current transmission system (FACTS) controllers.

Natural balancing of flying capacitor voltages in multicell inverter under PD carrier-based PWM

The flying capacitor multicell inverter (FCMI) possesses natural balancing property. With the phase-shifted (PS) carrier-based scheme, natural balancing can be achieved in a straightforward manner. However, to achieve natural balancing with the harmonically optimal phase-disposition (PD) carrierbased scheme, the conventional approaches require (n-1) x (n-1) trapezoidal carrier signals for an n-level inverter, which is (n-1) x (n-2) times more than that in the standard PD scheme. This paper proposes two improved natural balancing strategies for FMI under PD scheme, which use the same (n-1) carrier signals as used in the standard PD scheme. In the first scheme, on-line detection is performed of the band in which the modulation signal is located, corresponding period number of the carrier, and rising or falling half cycle of the carrier waveform to generate the switching signals based on certain rules. In the second strategy, the output voltage level selection is first processed and the switching signals are then generated according to a rule based on preferential cell selection algorithm. These methods are easy to use and can be simply implemented as compared to the other available methods. Simulation and experimental results are presented for a five-level inverter to verify these proposed schemes.

Flying Spore Trap Airborne Based Surveillance : towards a Biosecure Australia

The main limitations with existing fungal spore traps are that they are stationary and cannot be used in inaccessible or remote areas of Australia. This may result in delayed assessment, possible spread of harmful crop infestations and loss of crop yield and productivity. Fitted with the developed smart spore trap the UAV can fly, detect and monitor spores of plant pathogens in areas which previously were almost impossible to monitor. The technology will allow for earlier detection of emergency plant pests (EPPs) incursions by providing efficient and effective airborne surveillance, helping to protect Australia’s crops, pastures and the environment. The project is led by the Cooperative Research Centre for National Plant Biosecurity, with ARCAA/ QUT, CSIRO and the Queensland Government also providing resources. The prototype airplane was exhibited at the Innovation in Australia event December 7.

The flying doctors

This book is a reader for primary school students, stage 24-26 (fluent), incorporating mathematics themes. There is a fictional narrative, entitled "A Flying Visit", that describes Tess' and Alex's encounter with the Flying Doctor. A non-fiction recount, entitled "Fundraising for the Flying Doctors", describes the activities of a class group in raising money for the Flying Doctors. Accompanying the book is a "building comprehension card" to assist teachers in their classroom use of the reader.

I just want to design a sexy flying car! Teaching design-led innovation to designers

Many international management programs have capitalised on the value design can have upon potential business solutions and strategies (Martin, 2009 & Brown, 2008) as well as many international design programs introducing designers to business theory and curriculum (Manzini & Rizzo, 2011). This paper presents the findings from structured interviews with undergraduate design students and design industry professionals. Current literature surrounding design led innovation and the role designers’ play within it is also discussed and the challenges facing designers in this emerging design era are presented. The findings from this study indicate that most designers enter an undergraduate program not wanting to become the business leaders of tomorrow. Instead, they enter in the hope they can humbly help people and to make a difference in the world. There are contentions with this perspective, felt by industry, academia and students around why designers need to be taught business theory content. This paper provides the first step to overcoming this challenge by providing insight into the attitudes, perceptions and challenges designers are facing with this new design era.

The value of books : the fantastic flying books of Mr. Morris Lessmore and the social hieroglyphic of reading

The late eighteenth century witnessed the emergence of new technologies of subjectivity and of the literary. Most obviously, “the novel as a literary form appeared to embody and turn into an object the experience of life itself” (Park), and the novel genre came to both reflect and shape notions of interiority and subjectivity. In this same period, “A shift was taking place in the way people felt and thought about children and the accoutrements of childhood, including books and toys, were implicated in this change” (Lewis). In seeking to understand the relationships between media (e.g. books and toys), genres (e.g. novels and picture books), and modes of subjectivity, Marx’s influential theory of commodity fetishism, whereby “a definite social relation between men, that assumes, in their eyes, the fantastic form of a relation between things”, has served as a productive tool of analysis. The extent to which Marx’s account of commodity fetishism continues to be of use becomes clear when the corollaries between the late eighteenth-century emergence of novels and pictures books as technologies of subjectivity and the early twenty-first century emergence of e-readers and digital texts as technologies of subjectivity are considered. This paper considers the literary technology of Apple’s iPad (first launched in 2010) as a commodity fetish, and the circulation of “apps” as texts made available by and offered as justifications for, this fetish object. The iPad is both book and toy, but is never “only” either; it is arguably a new technology of subjectivity which incorporates but also destabilises categories of reading and playing such as those made familiar by earlier technologies of literature and the self. The particular focus of this paper is on the multimodal versions (app, film, and picture book) of The Fantastic Flying Books of Mr. Morris Lessmore, which are understood here as a narrativisation of commodity fetishism, subjectivity, and the act of reading itself.

Are boards flying blind when it comes to enterprise technology governance?

Considering the sheer speed, complexity and ever changing risk in today’s technology saturated business environment, it’s hardly surprising that the call for digitally savvy directors is increasing. Emerging research suggests serious consequences for boards that continue to ignore or delegate enterprise-level technology governance.

Intercontinental haptic teleoperation of a flying vehicle : a step towards real-time applications

This paper describes the theory and practice for a stable haptic teleoperation of a flying vehicle. It extends passivity-based control framework for haptic teleoperation of aerial vehicles in the longest intercontinental setting that presents great challenges. The practicality of the control architecture has been shown in maneuvering and obstacle-avoidance tasks over the internet with the presence of significant time-varying delays and packet losses. Experimental results are presented for teleoperation of a slave quadrotor in Australia from a master station in the Netherlands. The results show that the remote operator is able to safely maneuver the flying vehicle through a structure using haptic feedback of the state of the slave and the perceived obstacles.