Análise da evolução termomecânica da Bacia do Amazonas

Os dados geológicos e geofísicos escolhidos para o tema de estudo pertencem a Bacia do Amazonas, na região centro-norte do Brasil. A Bacia do Amazonas é uma bacia intracratônica com cerca de 500.000 km. A mesma está limitada ao norte pelo Escudo das Guianas e ao sul pelo Escudo Brasileiro. O limite oeste com a Bacia do Solimões é marcado pelo Arco de Purus, ao passo que o Arco de Gurupá constitui seu limite leste. Possui características inerentes a uma bacia intracratônica paleozóica, com uma longa história evolutiva, marcada por discordâncias expressivas e com uma cunha sedimentar relativamente rasa se comparada às bacias cretáceas brasileiras, o que levanta controvérsia a respeito da suficiência do soterramento para a eficiência de geração de hidrocarboneto. Podem ser reconhecidas nos 5000 m do preenchimento sedimentar da Bacia do Amazonas, duas seqüências de primeira ordem: uma paleozóica, intrudida por diques e soleiras de diabásio, na passagem do Triássico para o Jurássico, e uma mesozóica-cenozóica que representam um aspecto importante na evolução térmica da matéria orgânica que ocorre na primeira seqüência. Com relação à exploração de petróleo, apesar do fomento exploratório ocorrido nos últimos anos, a bacia ainda é considerada pouco explorada sendo sua maior reserva a da província de Urucu. Um dos fatores que dificultam bastante a exploração desta bacia assim como a bacia do Solimões a oeste é o acesso restrito, pois estão situadas em áreas remotas e florestadas, de difícil acesso, com muitas reservas indígenas e florestais, o que causa restrições logísticas, operacionais e legais. O efeito térmico das intrusões ígneas é considerado como o responsável pelo acréscimo de calor necessário à maturação da matéria orgânica e conseqüente geração de hidrocarbonetos. Este trabalho contribui com a reconstrução da história térmica desta bacia a partir da modelagem das variáveis termais e da história de soterramento. Para isso, foram utilizados modelos consagrados na literatura, que permitem, de forma simples, a estimativa do fluxo térmico através do embasamento e da seqüência sedimentar. Na análise da influência de intrusões ígneas na estrutura térmica da bacia, o modelo bidimensional desenvolvido pelo método de diferenças finitas se mostrou apropriado. Utilizou-se o fluxo térmico basal calculado nas condições de contorno da modelagem da influência térmica das ígneas. Como resultado obteve-se a estruturação térmica da bacia e a historia maturação de suas rochas geradoras

Resposta térmica de um compósito PEEK+PTFE+Fibra de carbono+grafite

Composites based on PEEK + PTFE + CARBON FIBER + Graphite (G_CFRP) has increased application in the top industries, as Aerospace, Aeronautical, Petroleum, Biomedical, Mechanical and Electronics Engineering challenges. A commercially available G_CFRP was warmed up to three different levels of thermal energy to identify the main damage mechanisms and some evidences for their intrinsic transitions. An experimental test rig for systematize a heat flux was developed in this dissertation, based on the Joule Effect. It was built using an isothermal container, an internal heat source and a real-time measurement system for test a sample by time. A standard conical-cylindrical tip was inserted into a soldering iron, commercially available and identified by three different levels of nominal electrical power, 40W (manufacturer A), 40W (manufacturer B), 100W and 150W, selected after screening tests: these power levels for the heat source, after one hour of heating and one hour of cooling in situ, carried out three different zones of degradation in the composite surface. The bench was instrumented with twelve thermocouples, a wattmeter and a video camera. The twelve specimens tested suffered different degradation mechanisms, analyzed by DSC (Differential Scanning Calorimetry) and TG (Thermogravimetry) techniques, Scanning Electron Microscopy (SEM) and Energy-Dispersive X-Rays (EDX) Analysis. Before and after each testing, it was measured the hardness of the sample by HRM (Hardness Rockwell M). Excellent correlations (R2=1) were obtained in the plots of the evaporated area after one hour of heating and one hour of cooling in situ versus (1) the respective power of heat source and (2) the central temperature of the sample. However, as resulting of the differential degradation of G_CFRP and their anisotropy, confirmed by their variable thermal properties, viscoelastic and plastic properties, there were both linear and non-linear behaviour between the temperature field and Rockwell M hardness measured in the radial and circumferential directions of the samples. Some morphological features of the damaged zones are presented and discussed, as, for example, the crazing and skeletonization mechanism of G_CFRP

Arcabouço geofísico, isostasia e causas do magmatismo cenozóico da província Borborema e de sua margem continental (Nordeste do Brasil)

The Borborema Province (BP) is a geologic domain located in Northeastern Brazil. The BP is limited at the south by the São Francisco craton, at the west by the Parnaíba basin, and both at the north and east by coastal sedimentary basins. Nonetheless the BP surface geology is well known, several key aspects of its evolution are still open, notably: i)its tectonic compartmentalization established after the Brasiliano orogenesis, ii) the architecture of its cretaceous continental margin, iii) the elastic properties of its lithosphere, and iv) the causes of magmatism and uplifting which occurred in the Cenozoic. In this thesis, a regional coverage of geophysical data (elevation, gravity, magnetic, geoid height, and surface wave global tomography) were integrated with surface geologic information aiming to attain a better understanding of the above questions. In the Riacho do Pontal belt and in the western sector of the Sergipano belt, the neoproterozoic suture of the collision of the Sul domain of the BP with the Sanfranciscana plate (SFP) is correlated with an expressive dipolar gravity anomaly. The positive lobule of this anomaly is due to the BP lower continental crust uplifting whilst the negative lobule is due to the supracrustal nappes overthrusting the SFP. In the eastern sector of the Sergipano belt, this dipolar gravity anomaly does not exist. However the suture still can be identified at the southern sector of the Marancó complex arc, alongside of the Porto da Folha shear zone, where the SFP N-S geophysical alignments are truncated. The boundary associated to the collision of the Ceará domain of the BP with the West African craton is also correlated with a dipolar gravity anomaly. The positive lobule of this anomaly coincides with the Sobral-Pedro II shear zone whilst the negative lobule is associated with the Santa Quitéria magmatic arc. Judging by their geophysical signatures, the major BP internal boundaries are: i)the western sector of the Pernambuco shear zone and the eastern continuation of this shear zone as the Congo shear zone, ii) the Patos shear zone, and iii) the Jaguaribe shear zone and its southwestern continuation as the Tatajuba shear zone. These boundaries divide the BP in five tectonic domains in the geophysical criteria: Sul, Transversal, Rio Grande do Norte, Ceará, and Médio Coreaú. The Sul domain is characterized by geophysical signatures associated with the BP and SFP collision. The fact that Congo shear zone is now proposed as part of the Transversal domain boundary implies an important change in the original definition of this domain. The Rio Grande do Norte domain presents a highly magnetized crust resulted from the superposition of precambrian and phanerozoic events. The Ceará domain is divided by the Senador Pompeu shear zone in two subdomains: the eastern one corresponds to the Orós-Jaguaribe belt and the western one to the Ceará-Central subdomain. The latter subdomain exhibits a positive ENE-W SW gravity anomaly which was associated to a crustal discontinuity. This discontinuity would have acted as a rampart against to the N-S Brasiliano orogenic nappes. The Médio Coreaú domain also presents a dipolar gravity anomaly. Its positive lobule is due to granulitic rocks whereas the negative one is caused by supracrustal rocks. The boundary between Médio Coreaú and Ceará domains can be traced below the Parnaíba basin sediments by its geophysical signature. The joint analysis of free air anomalies, free air admittances, and effective elastic thickness estimates (Te) revealed that the Brazilian East and Equatorial continental margins have quite different elastic properties. In the first one 10 km < Te < 20 km whereas in the second one Te ≤ 10 km. The weakness of the Equatorial margin lithosphere was caused by the cenozoic magmatism. The BP continental margin presents segmentations; some of them have inheritance from precambrian structures and domains. The segmentations conform markedly with some sedimentary basin features which are below described from south to north. The limit between Sergipe and Alagoas subbasins coincides with the suture between BP and SFP. Te estimates indicates concordantly that in Sergipe subbasin Te is around 20 km while Alagoas subbasin has Te around 10 km, thus revealing that the lithosphere in the Sergipe subbasin has a greater rigidity than the lithosphere in the Alagoas subbasin. Additionally inside the crust beneath Sergipe subbasin occurs a very dense body (underplating or crustal heritage?) which is not present in the crust beneath Alagoas subbasin. The continental margin of the Pernambuco basin (15 < Te < 25 km) presents a very distinct free air edge effect displaying two anomalies. This fact indicates the existence in the Pernambuco plateau of a relatively thick crust. In the Paraíba basin the free air edge effect is quite uniform, Te ≈ 15 km, and the lower crust is abnormally dense probably due to its alteration by a magmatic underplating in the Cenozoic. The Potiguar basin segmentation in three parts was corroborated by the Te estimates: in the Potiguar rift Te ≅ 5 km, in the Aracati platform Te ≅ 25 km, and in the Touros platform Te ≅ 10 km. The observed weakness of the lithosphere in the Potiguar rift segment is due to the high heat flux while the relatively high strength of the lithosphere in the Touros platform may be due to the existence of an archaean crust. The Ceará basin, in the region of Mundaú and Icaraí subbasins, presents a quite uniform free air edge effect and Te ranges from 10 to 15 km. The analysis of the Bouguer admittance revealed that isostasy in BP can be explained with an isostatic model where combined surface and buried loadings are present. The estimated ratio of the buried loading relative to the surface loading is equal to 15. In addition, the lower crust in BP is abnormally dense. These affirmations are particularly adequate to the northern portion of BP where adherence of the observed data to the isostatic model is quite good. Using the same above described isostatic model to calculate the coherence function, it was obtained that a single Te estimate for the entire BP must be lower than 60 km; in addition, the BP north portion has Te around 20 km. Using the conventional elastic flexural model to isostasy, an inversion of crust thickness was performed. It was identified two regions in BP where the crust is thickened: one below the Borborema plateau (associated to an uplifting in the Cenozoic) and the other one in the Ceará domain beneath the Santa Quitéria magmatic arc (a residue associated to the Brasiliano orogenesis). On the other hand, along the Cariri-Potiguar trend, the crust is thinned due to an aborted rifting in the Cretaceous. Based on the interpretation of free air anomalies, it was inferred the existence of a large magmatism in the oceanic crust surrounding the BP, in contrast with the incipient magmatism in the continent as shown by surface geology. In BP a quite important positive geoid anomaly exists. This anomaly is spatially correlated with the Borborema plateau and the Macaú-Queimadas volcanic lineament. The integrated interpretation of geoid height anomaly data, global shear velocity model, and geologic data allow to propose that and Edge Driven Convection (EDC) may have caused the Cenozoic magmatism. The EDC is an instability that presumably occurs at the boundary between thick stable lithosphere and oceanic thin lithosphere. In the BP lithosphere, the EDC mechanism would have dragged the cold lithospheric mantle into the hot asthenospheric mantle thus causing a positive density contrast that would have generated the main component of the geoid height anomaly. In addition, the compatibility of the gravity data with the isostatic model, where combined surface and buried loadings are present, together with the temporal correlation between the Cenozoic magmatism and the Borborema plateau uplifting allow to propose that this uplifting would have been caused by the buoyancy effect of a crustal root generated by a magmatic underplating in the Cenozoic

Mecanismos termorreguladores de cabras da raça Saanen -

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Mapeamento da isoterma de Curie na Bacia do Parnaíba estimada através da profundidade da base das fontes magnéticas

Located on the western edge of the Brazilian northeast, the Parnaíba Basin is an intra cratonic basin with oil production. This study aims at understanding its genesis and evolution, using aeromagnetic and gravity data. We used the spectral analysis of aeromagnetic data to map the depth to the bottom of the magnetic sources in order to assimilate this depth with the depth of the Curie isotherm, and infer the geothermal gradient. Using the spectral analysis technique, we succeeded in mapping the surface of the depth to the bottom of magnetic sources (SBFM), which marks the depth that occur magnetization. In the Parnaíba Basin the SBFM presented depths around -20,5 and -28,5 , which was consistent with an inversion of the same dataset using the technique of Magnetization Vector Inversion (MVI). Furthermore, SBFM topography correlates well with Moho depth, which was estimated from satellite gravimetric data from the GOCE mission (Gravity Field and Steady-State Ocean Circulation Explorer). Assuming that SBFM coincides with the Curie isotherm of magnetite (ICM), defined as the surface at which magnetite ( ) looses its ferromagnetic properties, it was possible to estimate the geothermal gradient. The geothermal gradient in the basin showed values between 19.2 and 26.5 , allowing to estimate the heat flow for the Parnaíba basin after assuming a conductivity of 2.69 . The resulting heat flow values ranged between 51.6 and 71.3 , which is consistent with values found in other works throughout the South American continent. Lithospheric thickness using an empirical relationship, finding values between -65.8 and -89.2 . We propose that thermal structure of Parnaíba basin is influenced by a deep thermal anomaly. This anomaly has heated the lithosphere beneath the basin and has resulted in relatively thin values for the lithospheric thickness and relatively high surface heat flow values. The origin of the anomaly is not clear, but the correlation between Curie depth and Moho topography, suggests that tectonic extension processes could have played a role.

Otimização evolucionária para problemas de transferência de calor em PCI usando MEC

Dissertação (mestrado)—Universidade de Brasília, Faculdade UnB Gama, Programa de Pós-graduação em Integridade de Materiais da Engenharia, 2015.

Umidificação e aquecimento do gás inalado em estação de anestesia com baixo fluxo de gases frescos com ou sem isolamento térmico do circuito ventilatório e com ou sem permutador de umidade e temperatura

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Umidificação e aquecimento do gás inalado em estação de anestesia com baixo fluxo de gases frescos com ou sem isolamento térmico do circuito ventilatório e com ou sem permutador de umidade e temperatura

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Utilização do programa energyplus para simulação do conforto térmico em edificações populares em quatro capitais brasileiras

O principal objetivo deste trabalho consiste em utilizar o programa EnergyPlus para simular e analisar o nível de conforto térmico dos moradores de uma edificação térrea simples. Para tanto, escolheu-se e definiu-se uma casa popular padrão que será utilizada para as cidades de Belém, PA, Brasília, DF, São Paulo, SP e Recife, PE. Em relação a esta residência e aos seus moradores foram determinadas diversas características, entre elas, rotinas de ocupação, nível de atividades, fator de vestimenta e número de moradores. Ganhos internos (lâmpadas e equipamentos elétricos) e renovação do ar (infiltração e ventilação) foram, também, considerados neste trabalho. O conforto térmico dos ocupantes da habitação foi simulado e analisado para uma semana representante da época do ano com a temperatura mais elevada, e outra semana que representa o período de frio ou chuvas, ou seja, época do ano com temperaturas mais baixas. Para esta etapa necessitou-se a utilização de arquivos climáticos das quatro capitais brasileiras citadas acima. Os níveis de conforto térmico foram determinados e estudados conforme a metodologia de Fanger, que utiliza os seguintes parâmetros: temperatura, umidade relativa e velocidade do ar, temperatura média radiante do ambiente, vestimenta e metabolismo dos indivíduos. Este estudo foi realizado para um ambiente em evolução livre e analisou-se somente a sala e os quartos da residência. Também não foram considerados neste trabalho os equipamentos elétricos com o intuito de melhorar o conforto térmico como, por exemplo, ventiladores A ferramenta de simulação computacional utilizada para o cálculo do conforto térmico neste trabalho foi o programa EnergyPlus. Para a simulação do conforto necessitou-se calcular a infiltração e a ventilação na residência, e com este intuito utilizou-se uma sub-rotina deste programa baseada no modelo de fluxo de ar multizonal COMIS. Os resultados obtidos para o conforto térmico, através dos valores de PMV, nos dias analisados das quatro cidades em que foi realizado o estudo mostraram-se bastante coerentes com as condições externas e internas da residência, indicando a boa capacidade do programa EnergyPlus nestes casos simulados. Calculado e analisado o conforto térmico das pessoas, melhorias nas estruturas da edificação foram sugeridas a fim da obtenção de condições otimizadas para os ocupantes desta habitação.

Tratamento térmico do titânio e suas consequências sobre as propriedades físico-químicas e de biocompatibilidade

The titanium and titanium alloys are widely used as biomaterial in biomedical device and so research have been developed aiming to improve and/or better to understand interaction biomaterial/biological environment. The process for manufacturing of this titanium implants usually involves a series of thermal and mechanical processes which have consequence on the final product. The heat treatments are usually used to obtain different properties for each application. In order to understand the influence of these treatments on the biological response of the surface, it was done, in this work, different heat treatments in titanium and analyzed their influence on the morphology, adhesion and proliferation of the pre-osteoblastic cells (MC3T3-E1). For such heat-treated titanium disks were characterized by optical microscopy, contact angle, surface energy, roughness, microhardness, X-ray diffraction and scanning through the techniques (BSE, EDS and EBSD). For the analysis of biological response were tested by MTT proliferation, adhesion by crystal violet and β1 integrin expression by flow cytometry. It was found that the presence of a microstructure very orderly, defined by a chemical attack, cells tend to stretch in the same direction of orientation of the material microstructure. When this order does not happen, the most important factor influencing cell proliferation is the residual stress, indicated by the hardness of the material. This way the disks with the highest level state of residual stress also showed increased cell proliferation

Membrana de alumina anódica: comportamento da microestrutura e estudo das propriedades ópticas após tratamento térmico

Thin commercial aluminum electrolytic and passed through reactions was obtained with anodic alumina membranes nanopores. These materials have applications in areas recognized electronic, biomedical, chemical and biological weapons, especially in obtaining nanostructures using these membranes as a substrate or template for processing nanowires, nanodots and nanofibers for applications noble. Previous studies showed that the membranes that have undergone heat treatment temperature to 1300° C underwent changes in morphology, crystal structure and optical properties. This aim, this thesis, a study of the heat treatment of porous anodic alumina membranes, in order to obtain and to characterize the behavior changes structures during the crystallization process of the membranes, at temperatures ranging between 300 and 1700° C. It was therefore necessary to mount a system formed by a tubular furnace resistive alumina tube and controlled environment, applying flux with special blend of Ag-87% and 13% N2, in which argon had the role of carrying out the oxygen nitrogen system and induce the closing of the pores during the densification of the membrane. The duration of heat treatment ranged from 60 to 15 minutes, at temperatures from 300 to 1700° C respectively. With the heat treatment occurred: a drastic reduction of porosity, grain growth and increased translucency of the membrane. For the characterization of the membranes were analyzed properties: Physical - thermogravimetric, X-ray diffraction, BET surface area; morphological - SEM, EDS through compositional and, optical absorbance, and transmittance in the UV-VIS, and FTIR. The results using the SEM showed that crystallization has occurred, densification and significant changes in membrane structure, as well as obtaining microtube, the BET analysis showed a decrease in specific surface area of the membranes has to 44.381 m2.g-1 to less than 1.8 m2.g-1 and in the analysis of transmittance and absorbance was found a value of 16.5% in the range of 800 nm, characteristic of the near infrared and FTIR have confirmed the molecular groups of the material. Thus, one can say that the membranes were mixed characteristics and properties which qualify for use in gas filtration system, as well as applications in the range of optical wavelength of the infra-red, and as a substrate of nanomaterials. This requires the continuation and deepening of additional study

Desenvolvimento de material compósito a base de raspa de pneu e látex para isolamento térmico

The process of recycling has been stimulated by the markets for several reasons, mainly on economical and environmental. Several products have been developed from recycled materials that already exist as well as several residues have been studied in different forms of applications. The greater majority of the applications for thermal insulation in the domestic, commercial and industrial systems have been elaborated in the temperature ranges between low to medium reaching up to 180oC. Many materials such as glass wool, rock wool, polystyrene are being used which are aggressive to the environment. Such materials in spite of the effectiveness in the retention of heat flow, they cost more and when discarded take several years to be absorbed by the nature. This way, in order to adapt to a world politics concerning the preservation of the environment, the present study was intended to develop a material composed of natural/biodegradable materials and industrial residues. The development of such a product in the form of a composite material based on tyre scrapes and latex for thermal insulation is presented in this research work. Thermal and physical properties of the tire scrapes as well as latex were studied in order to use them as raw materials for the manufacture of the intended composite to be applied as a thermal insulator in hot and cold systems varying between 0ºC and 200oC, respectively. Composite blankets were manufactured manually, in weight proportions of 1:1 (50:50%); 1:2 (33:67%) and 2:1 (67:33%) (tire scrapes: latex) respectively. Physical, mechanical and thermal properties of the composites were analyzed to obtain data about the viability of using the composite as a thermal insulator. The analyses carried out were based on standards ABNT, ASTM and UL. The maximum temperature obtained for the composite as a thermal insulator was 200ºC, which meets the range of applications that could be used as a thermal insulator in domestic as well as industrial purposes. The experimental results prove that the composite can be used as a thermal insulator on heated or cooled surface

Efeitos da temperatura e da movimentação do ar sobre o isolamento térmico do velo de ovinos em câmara climática

Foram utilizados dez ovinos da raça Corriedale - cinco machos e cinco fêmeas com pesos entre 52,2 e 87,6 kg - com o objetivo de avaliar o efeito da combinação da movimentação do ar (0 e 5,0 m/s) com a temperatura do ar (25, 30 e 40ºC) sobre a temperatura retal (T R, ºC), da epiderme (T E, ºC), da superfície do velo (T V, ºC) e do interior do velo (T I, ºC) e a espessura do velo (E V, cm) e suas relações com o isolamento térmico do velo. A presença de vento não teve efeito sobre as variáveis estudadas, o que sugere que fluxo de ar (<5,0 m/s) paralelo ao eixo corporal do animal tem pouco efeito sobre o isolamento térmico do velo, independentemente da temperatura do ar, que se mostrou altamente correlacionada, de forma positiva, com as temperaturas retal, do velo, do interior do velo e da epiderme. Sob temperaturas inferiores a 30ºC, a transferência de calor através do velo ocorreu via condução e convecção livre, enquanto sob altas temperaturas (>40ºC) o fluxo de calor sensível não foi significativa.

Regimes térmico e hídrico em solos sob ecossistemas naturais e área agrícola no Leste da Amazônia

A temperatura e umidade do solo são variáveis cujo conhecimento é fundamental para determinar os balanços de energia e água na biosfera. Os regimes térmico e hídrico dos solos sob cada ecossistema apresentam variações consideráveis, de acordo com sua mineralogia, o clima local e a vegetação. Nesse contexto, as temperaturas e umidades do solo foram medidas sob três ecossistemas existentes na região leste da Amazônia, a saber: floresta nativa (FLONA Caxiuanã, 01° 42' 30" S e 51° 31' 45" W), pastagem nativa (Soure, 00° 43' 25" S e 48° 30' 29" W) e área agrícola (!garapé-Açu, 01° 07' 59" S e 47° 36' 55" W). Os dados de campo na floresta e na pastagem foram coletados entre dezembro de 2001 e fevereiro de 2005; enquanto que na área agrícola, o monitoramento foi limitado de agosto de 2003 a fevereiro de 2005. Estas observações das variáveis físicas do solo foram analisadas levando em consideração as variáveis meteorológicas medidas simultaneamente tais como o fluxo de radiação solar incidente e a precipitação pluviométrica, que interferem diretamente nas variáveis do solo em cada sitio escolhido para estudo. As temperaturas do solo foram monitoradas por meio de sondas térmicas em profundidades de 0,05; 0,20 e 0,50 m. Fluxímetros de calor mediram esta variável em níveis de profundidade em 0,05 e 0,20 m. A umidade volumétrica do solo na camada superior de 0,30 m foi medida por sensor de sonda dupla por Reflectometria no Domínio do Tempo (TDR) em cada sitio. Foram feitas analises considerando as respostas do solo durante o período seco e chuvoso local, nestes três ecossistemas representativos do leste da Amazônia. Estimativas de difusividade térmica aparente do solo foram feitas pelos métodos da amplitude e da fase usando os dados de propagação do pulso diário de calor nesses solos. Os resultados mostraram valores bem diferentes, porém,no primeiro método pareceu mais confiável e adequado para o modelamento numérico. Como esperado, considerando a sua pouca cobertura vegetal, as temperaturas dos solos nos níveis superficiais, apresentaram grandes variações na pastagem e na área agrícola. Inesperadamente, as temperaturas na profundidade de 0,5 m abaixo da floresta mostraram maiores variações de amplitude que as profundidades de 0,20 e 0,05 m. O modelamento numérico das variações temporais da temperatura, em função da profundidade, para cada solo foi feito através do método harmônico Os resultados mostraram que o primeiro harmônico representou mais de 90% da variação total observada do pulso diário da temperatura da pastagem e área agrícola em 0,2 e 0,05 m de profundidade. Performance similar do modelamento foi observada na floresta nos níveis de 0,05 e 0,20 m. A magnitude dos fluxos de calor abaixo da pastagem e área agrícola atingiram valores seis vezes maiores que aqueles observados sob a floresta. Os resultados mostraram que, para a camada do solo superior de 0,30 m, a umidade volumétrica do solo sob a floresta é maior que sob os outros ecossistemas estudados neste trabalho. Este resultado é devido aparentemente; à proteção da floresta contra a evaporação da superfície do solo. Uma análise do comportamento sazonal e diário das temperaturas e umidade solos em resposta à radiação solar e precipitação é apresentada. Estudos de caso da taxa de perda da umidade do solo depois de significativa recarga de água por eventos de precipitação, também foram analisados. Algumas estimativas diárias de diminuição de água e recarga durante a noite e madrugada por subida de água de camadas subjacentes para a camada de 0.30 m foram feitas. Este trabalho analisou a maior serie temporal dos dados de temperatura e umidade dos solos coletados com alta freqüência de amostragem disponível até o momento, para o leste da Amazônia. Foi possível caracterizar as diferenças dos regimes destas variáveis físicas, abaixo de três ecossistemas importantes desta região. Estudos futuros dos minerais e materiais orgânicos nestes solos, bem como dos índices de área foliar e da biomassa das coberturas vegetais desses ecossistemas, melhoraria a compreensão dos regimes descritos neste trabalho.

Análise teórica e experimental de uma ventaneira de alto forno, visando seu comportamento térmico e fluidodinâmico

In this work, it was studied the thermal and fluid dynamic behavior from theorical and experimental point of view of a blast furnace tuyere. The tuyere is responsible for the hot air insuflation into the blast furnace. The parameter used in the comparison was the difference between the cooling water inlet and outlet temperatures. There were used forced convection correlations inside circular sections with adequations for non circular sections. Based on operations dates of flux and thermal loads it was possible to model numerically the tuyere, and, since it was obtained the wall temperatures, estimate the conduction and convection resistances and the heat flux through the walls in contact with the water. The total heat fluxes from wall to water were applied to the energy conservation equation where could be estimated the theorical temperature variation. Compared to the real value, the theorical value presented a difference of 0,2 °C. Considering that the boundary conditions around the tuyere are transitories and that your channels have some rugosity irregularities we can consider the estimation method for cooling system coherent with the real operational parameters