NOR network transduction procedures : "merging of gates" and "substitution of gates" for fan-in and fan-out restricted networks, NETTRA-G3-FIFO and NETTRA-PG1-FIFO /

"December 1974."--T.p.

NOR (NAND) network design : error-compensation procedures for fan-in and fan-out restricted networks (NETTRA-E1-FIFO and NETTRA-E2-FIFO /

Thesis (M. S.)--University of Illinois at Urbana-Champaign.

Network transduction programs based on connectable and disconnectable conditions with fan-in and fan-out restrictions : (a description of NETTRA-G1-FIFO and NETTRA-G2-FIFO) /

Includes bibliographical references.

Necessidade de informação para ajustamento e sua reversão no caso itens de inventário intermutáveis

Jornadas de Contabilidade e Fiscalidade promovidas pelo Instituto Superior de Contabilidade e Administração do Porto, em Abril de 2009

Análise e melhoria de processo de pintura e vulcanização na Continental

A indústria automóvel é um dos setores mais exigentes do mercado global, por este motivo empresas como a Continental Mabor S.A, líderes de mercado, necessitam estar na linha da frente no que toca a programas de melhoria contínua e de uma gestão orientada para um crescimento rentável e sustentado. Nesta perspetiva, este estudo de dissertação tem como objetivo encontrar uma solução para a gestão de stock e FiFo (First in First out) de pneus em verde na supracitada empresa, situada em Lousado, Vila Nova de Famalicão. Este projeto de dissertação iniciou-se com uma análise e diagnóstico do processo produtivo do pneu, entre a Construção e a Vulcanização. Nesta análise, foi possível identificar vários problemas, sendo o mais crítico associado à logística interna de transporte do pneu “em curso”, de fabrico entre as fases do mesmo, Construção e Vulcanização. Devido a condicionantes estruturais e de organização, a logística interna de transporte entre estes dois sectores enfrenta estrangulamentos nos fluxos, a falta de espaço para acomodar o material em curso, problemas organizacionais de controlo e monitorização do processo produtivo, dificuldades de regulação do fluxo e localização dos carros de transporte dos pneus em verde. Face aos problemas detetados ao longo do estudo, foram analisadas várias soluções para a resolução ou minimização dos mesmos. Entre as soluções propostas salientam-se: o alargamento do sistema de transporte por tapetes rolantes GTC (Green Tire Conveying) a todos os módulos de construção. Esta solução diminui o fluxo de carros para a área da construção, descongestionando a zona próxima do sistema de carregamento automático GTAL (Green Tire Automatic Loading) na vulcanização. A implementação dum sistema Wi-Fi RFID, que permite identificar e localizar artigos em curso utilizando etiquetas inteligentes numa rede wireless, conseguindo melhorar a programação de produção e o respetivo sequenciamento. Sabendo também que a Continental se encontra numa fase de expansão, designada Projeto Route 17/20, as soluções propostas tomaram em consideração essa nova realidade futura. Assim, foram estudados e propostos novos layouts para esse atual processo. Nestes novos layouts, procurou-se uma reorganização dos processos de fabrico, bem como um redimensionamento dos espaços de parqueamento de carros de pneus verdes adequado aos volumes produtivos. De igual forma, adequou-se os espaços físicos à possível implementação de um sistema de FiFo de pneus em verde na planta fabril, quando concluída a expansão. Este trabalho de dissertação apresenta como vantagens diretas da sua implementação: gerar a menor perturbação no atual método de trabalho seguido na empresa; previsivelmente aumentar a eficiência do processo produtivo; potenciar o crescimento tecnológico programado pela empresa; e oferecer uma boa relação custo/benefício no investimento necessário. Como apreciação final, pode-se concluir que este estudo foi finalizado com sucesso, visto que as soluções propostas foram apreciadas positivamente pela Administração da Continental Mabor S.A. e estão correntemente a ser avaliadas pelo grupo.

Scheduling real-time communications with P-NET

In this paper we address the P-NET Medium Access Control (MAC) ability to schedule traffic according to its real-time requirements, in order to support real-time distributed applications. We provide a schedulability analysis based on the P-NET standard, and propose mechanisms to overcome priority inversion problems resulting from the use of FIFO outgoing buffers

Improving the IEEE 802.15.4 Slotted CSMA/CA MAC for time-critical events in wireless sensor networks

In beacon-enabled mode, IEEE 802.15.4 is ruled by the slotted CSMA/CA Medium Access Control (MAC) protocol. The standard slotted CSMA/CA mechanism does not provide any means of differentiated services to improve the quality of service for timecritical events (such as alarms, time slot reservation, PAN management messages etc.). In this paper, we present and discuss practical service differentiation mechanisms to improve the performance of slotted CSMA/CA for time-critical events, with only minor add-ons to the protocol. The contribution of our proposal is more practical than theoretical since our initial requirement is to leave the original algorithm of the slotted CSMA/CA unchanged, but rather tuning its parameters adequately according to the criticality of the messages. We present a simulation study based on an accurate model of the IEEE 802.15.4 MAC protocol, to evaluate the differentiated service strategies. Four scenarios with different settings of the slotted CSMA/CA parameters are defined. Each scenario is evaluated for FIFO and Priority Queuing. The impact of the hiddennode problem is also analyzed, and a solution to mitigate it is proposed.

A Generic and Compositional Framework for Multicore Response Time Analysis

23rd International Conference on Real-Time Networks and Systems (RTNS 2015). 4 to 6, Nov, 2015, Main Track. Lille, France. Best Paper Award Nominee

Non-preemptive and SRP-based fullypreemptive scheduling of real-time Software Transactional Memory

Recent embedded processor architectures containing multiple heterogeneous cores and non-coherent caches renewed attention to the use of Software Transactional Memory (STM) as a building block for developing parallel applications. STM promises to ease concurrent and parallel software development, but relies on the possibility of abort conflicting transactions to maintain data consistency, which in turns affects the execution time of tasks carrying transactions. Because of this fact the timing behaviour of the task set may not be predictable, thus it is crucial to limit the execution time overheads resulting from aborts. In this paper we formalise a FIFO-based algorithm to order the sequence of commits of concurrent transactions. Then, we propose and evaluate two non-preemptive and one SRP-based fully-preemptive scheduling strategies, in order to avoid transaction starvation.

Ohutlevy-yrityksen mekaanisen valmistuksen tehostaminen

Diplomityön tavoitteena on tehostaa ohutlevytuotteita valmistavan yrityksen toimintaa ja parantaa tuotannon ohjattavuutta. Tuotannon tehostamisessa keskitytään minimoimaan asetusajat, pienentämään eräkokoja ja investoimaan valmistusta helpottaviin työkoneisiin tai -laitteisiin. Tuotannon ohjattavuutta kehitetään helpottamalla visuaalista seurantaa, layout-muutoksilla ja FiFo-ohjauksen käyttöönotolla. Kaikilla kehitystoimenpiteillä pyritään lyhentämään tuotannon läpimenoaikaa ja vähentämään keskeneräisen tuotannon määrää. Tavoitteena on luoda pohja Lean-valmistukselle. Kehitystoimenpiteet keskitetään useimmiten pullonkauloiksi muodostuville osastoille. Kapeikkojen avaamisessa hyödynnetään CIM-projektin mukaisesti tehtäviä investointeja. Uudella robottisärmäysyksiköllä mahdollistetaan litistäminen ja särmääminen yhdellä asetuksella. Kokoonpano-osaston sijaintia muutettiin ja osaston layoutista tehtiin linjamainen. Tuotannonohjauksen kehittämiseksi luotiin yksinkertainen kolmen askeleen kehitysmalli.

Lean Six Sigma in a Manufacturing Lead Time Improvement Project

The objective of this research is to demonstrate the use of Lean Six Sigma methodology in a manufacturing lead time improvement project. Moreover, the goal is to develop working solutions for the target company to improve its manufacturing lead time. The theoretical background is achieved through exploring the literature of Six Sigma, Lean and Lean Six Sigma. The development will be done in collaboration with the related stakeholders, by following the Lean Six Sigma improvement process DMAIC and by analyzing the process data from the target company. The focus of this research is in demonstrating how to use Lean Six Sigma improvement process DMAIC in practice, rather than in comparing Lean Six Sigma to other improvement methodologies. In order to validate the manufacturing system’s current state, improvement potential and solutions, statistical tools such as linear regression analysis were used. This ensured that all the decisions were as heavily based on actual data as possible. As a result of this research, a set of solutions were developed and implemented in the target company. These solutions included batch size reduction, bottleneck shift, first-in first-out queuing and shifting a data entry task from production planners to line workers. With the use of these solutions, the target company was able to reduce its manufacturing lead time by over one third.

Sisäisten tuotevirtojen hallinta elintarviketeollisuudessa

Elintarvikealan yritysten tulee kehittää laadukkaita, kustannustehokkaita ja monipuolisen sisällön omaavia tuotteita elintarvikealan standardeja noudattaen nopeammin kuin koskaan. Uusien lopputuotteiden kehittämisen myötä myös puolivalmisteiden kokonaismäärä kasvaa, mikä vaikeuttaa erityisesti sisäisten tuotevirtojen hallittavuutta tehtaalla. Toimintaympäristön muutoksien seurauksena yritysten on automatisoitava toimintoja tehostaakseen tuotantoaan ja saavuttaakseen kilpailuetua. Tutkimuksen tekemiseen käytettiin kvalitatiivista eli laadullista lähestymistapaa, jonka tarkoituksena on tutkia kohdetta mahdollisimman monipuolisesti. Kvalitatiivisen tiedon hankkimiseen käytettiin haastatteluja sekä osallistuvaa ja passiivista tarkkailua. Toimintatutkimuksen tavoin tarkoituksena oli kehittää ratkaisu kohdeyrityksen ongelmaan soveltamalla olemassa olevaa teoreettista tietämystä ja kentällä tehtyjä havaintoja. Tutkimuksen tuloksena löydettiin parhaiten kohdeyrityksen tehdasympäristöön sisäisten tuotevirtojen hallintaan soveltuva seuranta- ja tunnistustekniikka. Lisäksi haastatteluiden pohjalta saatiin määritettyä liikkeellepanevat ja vastustavat voimat, jotka ohjaavat mahdollisen investointisuunnitelman etenemistä ja päätöksentekoa.

On Queues with Interruptions and Repeat or Resumption of Service

This thesis entitled' On Queues with Interruptions and Repeat or Resumption of Service' introduces several new concepts into queues with service interruption. It is divided into Seven chapters including an introductory chapter. The following are keywords that we use in this thesis: Phase type (PH) distribution, Markovian Arrival Process (MAP), Geometric Distribution, Service Interruption, First in First out (FIFO), threshold random variable and Super threshold random variable. In the second chapter we introduce a new concept called the 'threshold random variable' which competes with interruption time to decide whether to repeat or resume the interrupted service after removal of interruptions. This notion generalizes the work reported so far in queues with service interruptions. In chapter 3 we introduce the concept of what is called 'Super threshold clock' (a random variable) which keeps track of the total interruption time of a customer during his service except when it is realized before completion of interruption in some cases to be discussed in this thesis and in other cases it exactly measures the duration of all interruptions put together. The Super threshold clock is OIl whenever the service is interrupted and is deactivated when service is rendered. Throughout this thesis the first in first out service discipline is followed except for priority queues.