Indicadores de "Hidricidade" como ferramenta de avaliação da eficiência urbana

One of the biggest challenges for urban space planners is to conciliate the indispensable demands of life with the forms of occupation of the territory. Among these demands is water. Population growth and urban sprawl are challenging water availability. Thus, it is important to evaluate development trends to predict future scenarios, enabling guide preventive actions and decision making. It is essential to have a practical and direct tool that allows us to transmit the necessary information. The objective of this study is to present a method for evaluating the urban efficiency in the process of city expansion and the availability of water supply. To do so, the indicators will be defined, called indicators of "hidricidade". As a result, it is expected to be obtained a direct and practical tool, that is going to allow to transmit the necessary information to the harmonic urban process planning, applicable to medium size Brazilian cities, allowing decision making as a guarantee of water supply and urban sprawl.

Conditioned polarized Caco-2 cell monolayers allow to discriminate for the ability of gut-derived microorganisms to modulate permeability and antigen-induced basophil degranulation.

BACKGROUND: Food allergy is a common allergic disorder--especially in early childhood. The avoidance of the allergenic food is the only available method to prevent further reactions in sensitized patients. A better understanding of the immunologic mechanisms involved in this reaction would help to develop therapeutic approaches applicable to the prevention of food allergy. OBJECTIVE: To establish a multi-cell in vitro model of sensitized intestinal epithelium that mimics the intestinal epithelial barrier to study the capacity of probiotic microorganisms to modulate permeability, translocation and immunoreactivity of ovalbumin (OVA) used as a model antigen. METHODS: Polarized Caco-2 cell monolayers were conditioned by basolateral basophils and used to examine apical to basolateral transport of OVA by ELISA. Activation of basophils with translocated OVA was measured by beta-hexosaminidase release assay. This experimental setting was used to assess how microorganisms added apically affected these parameters. Basolateral secretion of cytokine/chemokines by polarized Caco-2 cell monolayers was analysed by ELISA. RESULTS: Basophils loaded with OVA-specific IgE responded to OVA in a dose-dependent manner. OVA transported across polarized Caco-2 cell monolayers was found to trigger basolateral basophil activation. Microorganisms including lactobacilli and Escherichia coli increased transepithelial electrical resistance while promoting OVA passage capable to trigger basophil activation. Non-inflammatory levels of IL-8 and thymic stromal lymphopoietin were produced basolaterally by Caco-2 cells exposed to microorganisms. CONCLUSION: The complex model designed in here is adequate to learn about the consequence of the interaction between microorganisms and epithelial cells vis-a-vis the barrier function and antigen translocation, two parameters essential to mucosal homeostasis. It can further serve as a direct tool to search for microorganisms with anti-allergic and anti-inflammatory properties.

Laser-Sintern. Die Schluesseltechnologie des e-Manufacturing TM

e-Manufacturing™, das ist die schnelle, flexible und kostengünstige Fertigung von Produkten, Formen/Werkzeugen oder Modellen direkt aus elektronischen Daten. e-Manufacturing™ schließt Rapid Prototyping, Rapid Tooling oder Rapid Manufacturing ein, geht aber zugleich weit über den Gedanken der schnellen Verfügbarkeit hinaus. Zwar wird auch in Zukunft die schnelle Produktentwicklung eine immer wichtigere Rolle spielen, bei der e-Manufacturing™ für ein verkürztes Time to Market sorgt, Entwicklungskosten verringert und zur Risikominimierung beiträgt. Darüber hinaus entstehen aber auch neue Geschäftsmodelle, da Kleinserienproduktion, steigende Variantenvielfalt und eine individualisierte Produktion (Mass Customization) plötzlich möglich und wirtschaftlich sind und sich neue Logistikkonzepte wie (Spare) parts on demand entwickeln. Die neue Konstruktionsfreiheit des Laser-Sinterns ermöglicht neue Produktkonzepte. Minimale Einschränkungen durch das Fertigungsverfahren erlauben funktionelle Integration und die Fertigung des „Unmöglichen“, da kreisförmige und lineare Werkzeugbewegungen das Produktdesign nicht mehr beeinflussen bzw. limitieren. Auch die Fertigungskonzepte unterliegen einem Wandel und werden deutlich flexibler. Werkzeuglose Produktion, losgrößenangepasste Fertigung und dezentrale Fertigung on demand sind die Schlagworte der Zukunft. Der vorliegende Beitrag zeigt Beispiele für den erfolgreichen kommerziellen Einsatz von Laser-Sintern in allen Phasen des Produktlebenszyklus. Der Schwerpunkt liegt dabei auf der direkten Herstellung von Funktionsteilen in der Serienfertigung. Die entscheidenden Faktoren für eine erfolgreiche Einführung und Anwendung von e-Manufacturing™ werden diskutiert. Der Beitrag zeigt auf, wie die neuesten technologischen Innovationen im Laser-Sintern, speziell zur Produktivitätssteigerung, das Spektrum der Anwendungsfelder erweitern, in denen dieses Fertigungsverfahren kostengünstige Lösungen bietet.

A web-based tool to evaluate the iterative processes of direct search methods

Constrained and unconstrained Nonlinear Optimization Problems often appear in many engineering areas. In some of these cases it is not possible to use derivative based optimization methods because the objective function is not known or it is too complex or the objective function is non-smooth. In these cases derivative based methods cannot be used and Direct Search Methods might be the most suitable optimization methods. An Application Programming Interface (API) including some of these methods was implemented using Java Technology. This API can be accessed either by applications running in the same computer where it is installed or, it can be remotely accessed through a LAN or the Internet, using webservices. From the engineering point of view, the information needed from the API is the solution for the provided problem. On the other hand, from the optimization methods researchers’ point of view, not only the solution for the problem is needed. Also additional information about the iterative process is useful, such as: the number of iterations; the value of the solution at each iteration; the stopping criteria, etc. In this paper are presented the features added to the API to allow users to access to the iterative process data.

Review of investment strategy, portfolio management, and scorecard based portfolio selection tool for direct property investments in Finland

The lack of research of private real estate is a well-known problem. Earlier studies have mostly concentrated on the USA or the UK. Therefore, this master thesis offers more information about the performance and risk associated with private real estate investments in Nordic countries, but especially in Finland. The structure of this master thesis is divided into two independent sections based on the research questions. In first section, database analysis is performed to assess risk-return ratio of direct real estate investment for Nordic countries. Risk-return ratios are also assessed for different property sectors and economic regions. Finally, review of diversification strategies based on property sectors and economic regions is performed. However, standard deviation itself is not usually sufficient method to evaluate riskiness of private real estate. There is demand for more explicit assessment of property risk. One solution is property risk scoring. In second section risk scorecard based tool is built to make different real estate comparable in terms of risk. In order to do this, nine real estate professionals were interviewed to enhance the structure of theory-based risk scorecard and to assess weights for different risk factors.

Direct laser writing by two-photon polymerization as a tool for developing microenvironments for evaluation of bacterial growth

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fluorescent In Situ hybridization: a new tool for the direct identification and detection of F. psychrophilum

F. psychrophilum is the causative agent of Bacterial Cold Water Disease (BCW) and Rainbow Trout Fry Syndrome (RTFS). To date, diagnosis relies mainly on direct microscopy or cultural methods. Direct microscopy is fast but not very reliable, whereas cultural methods are reliable but time-consuming and labor-intensive. So far fluorescent in situ hybridization (FISH) has not been used in the diagnosis of flavobacteriosis but it has the potential to rapidly and specifically detect F. psychrophilum in infected tissues. Outbreaks in fish farms, caused by pathogenic strains of Flavobacterium species, are increasingly frequent and there is a need for reliable and cost-effective techniques to rapidly diagnose flavobacterioses. This study is aimed at developing a FISH that could be used for the diagnosis of F. psychrophilum infections in fish. We constructed a generic probe for the genus Flavobacterium ("Pan-Flavo") and two specific probes targeting F. psychrophilum based on 16S rRNA gene sequences. We tested their specificity and sensitivity on pure cultures of different Flavobacterium and other aquatic bacterial species. After assessing their sensitivity and specificity, we established their limit of detection and tested the probes on infected fresh tissues (spleen and skin) and on paraffin-embedded tissues. The results showed high sensitivity and specificity of the probes (100% and 91% for the Pan-Flavo probe and 100% and 97% for the F. psychrophilum probe, respectively). FISH was able to detect F. psychrophilum in infected fish tissues, thus the findings from this study indicate this technique is suitable as a fast and reliable method for the detection of Flavobacterium spp. and F. psychrophilum.

A high-resolution map of direct and indirect connectivity of erosion risk areas to surface waters in Switzerland: A risk assessment tool for planning and policy-making

Off-site effects of soil erosion are becoming increasingly important, particularly the pollution of surface waters. In order to develop environmentally efficient and cost effective mitigation options it is essential to identify areas that bear both a high erosion risk and high connectivity to surface waters. This paper introduces a simple risk assessment tool that allows the delineation of potential critical source areas (CSA) of sediment input into surface waters concerning the agricultural areas of Switzerland. The basis are the erosion risk map with a 2 m resolution (ERM2) and the drainage network, which is extended by drained roads, farm tracks, and slope depressions. The probability of hydrological and sedimentological connectivity is assessed by combining soil erosion risk and extended drainage network with flow distance calculation. A GIS-environment with multiple-flow accumulation algorithms is used for routing runoff generation and flow pathways. The result is a high resolution connectivity map of the agricultural area of Switzerland (888,050 ha). Fifty-five percent of the computed agricultural area is potentially connected with surface waters, 45% is not connected. Surprisingly, the larger part of 34% (62% of the connected area) is indirectly connected with surface waters through drained roads, and only 21% are directly connected. The reason is the topographic complexity and patchiness of the landscape due to a dense road and drainage network. A total of 24% of the connected area and 13% of the computed agricultural area, respectively, are rated with a high connectivity probability. On these CSA an adapted land use is recommended, supported by vegetated buffer strips preventing sediment load. Even areas that are far away from open water bodies can be indirectly connected and need to be included in planning of mitigation measures. Thus, the connectivity map presented is an important decision-making tool for policy-makers and extension services. The map is published on the web and thus available for application.

Direct support and general support maintenance repair parts and special tool lists (including depot maintenance repair parts and special tools) for radar set AN/PPS-5B (NSN-5840-01-009-4939).

"October 1977."

Operator, organizational, direct support, and general support maintenance manual : compressor, rotary, air, diesel engine driven, 250 cfm, 100 psi, trailer mounted, two wheel (Davey model 14M250RPV) FSN 4310-256-9319, component of pneumatic tool and compressor outfit, FSN 3820-950-8584.

"June 1972."

Direct support and general support maintenance manual for tractor, wheeled, DED, loader backhoe, with hydraulic impact tool and with hydraulic earth auger attachment, John Deere model JD410 (CCE), with bucket, impactor, and earth drill (NSN 2420-00-567-0135).

"August 1992."

Organizational and direct support maintenance manual including repair parts and special tool list : can, gasoline, military, steel, 5-gallon, FSN 7240-222-3088; can, water, military, steel ... aluminum ... plastic ... case, military, water can, FSN 7240-125-9061.

"February 1974."

Organizational, direct support and general support maintenance repair parts and special tool list for water purification unit, reverse osmosis, 600 GPH trailer mounted, flatbed cargo, 5 ton 4 wheel tandem model Rowpu 600-1, (4610-01-093-2380).

"September 1983."

Direct and general support (including repair parts and special tool lists) : generator assembly (2920-903-9534) (Prestolite model GHA4804JUT).

"June 1966."