Outcome of patients with acute coronary syndrome in hospitals of different sizes. A report from the AMIS Plus Registry.

To assess the impact of admission to different hospital types on early and 1-year outcomes in patients with acute coronary syndrome (ACS). Between 1997 and 2009, 31 010 ACS patients from 76 Swiss hospitals were enrolled in the AMIS Plus registry. Large tertiary institutions with continuous (24 hour/7 day) cardiac catheterisation facilities were classified as type A hospitals, and all others as type B. For 1-year outcomes, a subgroup of patients admitted after 2005 were studied. Eleven type A hospitals admitted 15987 (52%) patients and 65 type B hospitals 15023 (48%) patients. Patients admitted into B hospitals were older, more frequently female, diabetic, hypertensive, had more severe comorbidities and more frequent non-ST segment elevation (NSTE)-ACS/unstable angina (UA). STE-ACS patients admitted into B hospitals received more thrombolysis, but less percutaneous coronary intervention (PCI). Crude in-hospital mortality and major adverse cardiac events (MACE) were higher in patients from B hospitals. Crude 1-year mortality of 3747 ACS patients followed up was higher in patients admitted into B hospitals, but no differences were found for MACE. After adjustment for age, risk factors, type of ACS and comorbidities, hospital type was not an independent predictor of in-hospital mortality, in-hospital MACE, 1-year MACE or mortality. Admission indicated a crude outcome in favour of hospitalisation during duty-hours while 1-year outcome could not document a significant effect. ACS patients admitted to smaller regional Swiss hospitals were older, had more severe comorbidities, more NSTE-ACS and received less intensive treatment compared with the patients initially admitted to large tertiary institutions. However, hospital type was not an independent predictor of early and mid-term outcomes in these patients. Furthermore, our data suggest that Swiss hospitals have been functioning as an efficient network for the past 12 years.

Outcome of patients with acute coronary syndrome in hospitals of different sizes in Switzerland

Objective: To assess the impact of patient admission in different hospital types in Switzerland on early in-hospital and 1-year outcomes in patients with acute coronary syndrome (ACS).Methods: From 1997 to 2009, 31,010 ACS patients from 76 Swiss hospitals were enrolled in the AMIS Plus registry. Large tertiary teaching institutions with 24 hour/7 day cardiac catheterization facilities were classified as type A hospitals, all others as type B. One-year outcome was studied in a subgroup of patients admitted after 2005. Multivariate logistic regression models were used to calculate the odds ratios (OR with 95%CI) for independent predictors of mortality and major adverse cardiac events (MACE).Results: There were 11 type A hospitals with admissions of 15,987 (52%) patients and 65 type B hospitals with 15,023 (48%) patients. Patients initially admitted into B hospitals were older, more frequently female, hypertensive and diabetic, had more severe comorbidities and more frequently NSTE-ACS/UA. They were less likely to receive aspirin, clopidogrel and GPIIb/IIIa antagonists. STE-ACS patients initially admitted into B hospitals received more thrombolysis than those admitted into A hospitals, but less percutaneous coronary intervention (PCI). From the patients admitted to B hospitals, 5271 (35%) were transferred for intervention. Crude in-hospital mortality and MACE were higher in patients from B hospitals. Crude 1-year mortality of 3747 ACS patients followed up was higher in patients initially admitted into B hospitals, but no differences were found for MACE. Hospital type, after adjustment for age, risk factors, type of ACS and co-morbidities, was not an independent predictor of in-hospital mortality (OR 0.94; 0.76-1.16), in-hospital MACE (0.98; 0.82-1.17), 1-year mortality or 1-year MACE (1.06; 0.85-1.33). Analysis of the time of admission indicated a crude outcome in favor of hospitalization during duty-hours but no significant effect could be documented for 1-year outcome.Conclusion: ACS patients admitted to type B hospitals were older, had more severe co-morbidities, more NSTEACS and received less intensive treatment. However, after correcting for baseline inequalities, early and mid-term outcomes were similar regardless of hospital type. Ultimate patient outcome thus does not appear to be influenced by the type of hospital where the initial admission takes place. Appropriate early referral of selected patients probably partly explains this finding.

Triplex Doppler evaluation of the testes in dogs of different sizes

This study aimed to assess whether there are differences in Doppler velocimetry parameters between different sizes. Twenty dogs were equally divided into small and large groups used in this study. The dogs were evaluated using Triplex ultrasound. Testicular artery was located by Colour Doppler in the spermatic cord, marginal to the testes and intratesticular segments and then, spectral Doppler were used to calculate: peak systolic velocity (PSV), end diastolic velocity (EDV), resistance index (RI) and pulsatility index (PI). The mean testicular volume in the left side was significantly higher than the right side, in both groups. Doppler examination showed higher velocities (EDV) at spermatic cord in large dogs; marginal to the testes was observed higher velocities in small dogs; intratesticular region no differences were observed (P < 0.05) and within the groups differences between segments of the artery were also observed for each parameter. The results showed that there are differences in Doppler velocimetry parameters between different sizes.

Ascorbic acid and pectin in different sizes and parts of citric fruits

Citric fruits - in natura, as frozen pulp or even as juice - are one of the most important Brazilian exportation products. They are a source of ascorbic acid - a potent antioxidant, and pectin, which is used in the food industry and is an important dietary fiber. This project aims to quantify ascorbic acid and pectin contents in citric fruits, commercial oranges and tangerines, comparing them in sizes and varieties. Ascorbic acid amount was measured in juice comparing sizes, varieties and storage conditions, using a tritimetric method with 2.6-dichlorobenzenoindophenol indicator. Total and soluble pectin in each part of the fruits (peel, albedo, pulp and juice) were quantified using the polygalacturonic acid as a standard. Differences were found between the sizes. The highest content of vitamin C was found in the oranges (Bahia variety). Comparing the storage temperatures, the biggest loss was at room temperature. Albedo presented the highest content of pectin in all fruits. In juice, the total and soluble pectin contents increased as fruits size decreased. Oranges and tangerines differed in the amount of pectin

Influence of implants with different sizes and configurations installed immediately into extraction sockets on peri-implant hard and soft tissues: an experimental study in dogs

Aim: To study the influence on the healing of soft and hard peri-implant tissues when implants of different sizes and configurations were installed into sockets immediately after tooth extraction.Material and methods: Transmucosal cylindrical implants, 3.3 mm in diameter in the control sites, and conical 5 mm in diameter in the test sites, were installed into the distal socket of the fourth mandibular premolars in dogs immediately after tooth extraction. After 4 months, the hard and soft tissue healing was evaluated histologically. Results: All implants were integrated in mineralized mature bone. Both at the test and control sites, the alveolar crest underwent resorption. The buccal bony surface at the implant test sites (conical; 3.8 mm) was more resorbed compared with the control sites (cylindrical; 1.6 mm). The soft tissue dimensions were similar in both groups. However, in relation to the implant shoulder, the peri-implant mucosa was located more apically at the test compared with the control sites.Conclusion: The present study confirmed that the distance between the implant surface and the outer contour of the buccal alveolar bony crest influenced the degree of resorption of the buccal bone plate. Consequently, in relation to the implant shoulder, the peri-implant mucosa will be established at a more apical level, if the distance between the implant surface and the outer contour of the alveolar crest is small.

Influence of the implant diameter with different sizes of hexagon: Analysis by 3-dimensional finite element method

The aim of this study was to evaluate the stress distribution in implants of regular platforms and of wide diameter with different sizes of hexagon by the 3-dimensional finite element method. We used simulated 3-dimensional models with the aid of Solidworks 2006 and Rhinoceros 4.0 software for the design of the implant and abutment and the InVesalius software for the design of the bone. Each model represented a block of bone from the mandibular molar region with an implant 10 mm in length and different diameters. Model A was an implant 3.75 mm/regular hexagon, model B was an implant 5.00 mm/regular hexagon, and model C was an implant 5.00 mm/ expanded hexagon. A load of 200 N was applied in the axial, lateral, and oblique directions. At implant, applying the load (axial, lateral, and oblique), the 3 models presented stress concentration at the threads in the cervical and middle regions, and the stress was higher for model A. At the abutment, models A and B showed a similar stress distribution, concentrated at the cervical and middle third; model C showed the highest stresses. On the cortical bone, the stress was concentrated at the cervical region for the 3 models and was higher for model A. In the trabecular bone, the stresses were less intense and concentrated around the implant body, and were more intense for model A. Among the models of wide diameter (models B and C), model B (implant 5.00 mm/regular hexagon) was more favorable with regard to distribution of stresses. Model A (implant 3.75 mm/regular hexagon) showed the largest areas and the most intense stress, and model B (implant 5.00 mm/regular hexagon) showed a more favorable stress distribution. The highest stresses were observed in the application of lateral load.

Biochemical and genotoxic effects of a commercial formulation of the herbicide tebuthiuron in Oreochromis niloticus of different sizes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Synthesis of polyphenylene cylinders with different sizes and connectivity patterns as well as study of their linear congeners

In dieser Arbeit wird die Synthese von Polyphenylenzylindern (PPZ) und strukturell verwandten Molekülen beschrieben, die in unterschiedlichen Größen und verschiedenartigen Bindungsmustern dargestellt wurden. Aufgrund ihres Aufbaus sind sie direkte Vorläufermoleküle von Kohlenstoffnanoröhren (CNT)s. Ziel war es, zunächst zu untersuchen, ob sich PPZs darstellen lassen. In einem anschließenden Schritt wurde die nasschemische Synthese von CNTs untersucht, die auf diesem Weg bisher noch nicht erreicht werden konnte. Die hier studierten Strukturen führten zu vielversprechenden Ergebnisse auf diesem Weg, da die oxidative Cyclodehydrierung – eine intramolekulare Anellierung – zur Bildung von ca. 50% der notwendigen Bindungen führte.

Abrasive wear study of white cast iron with different solidification rates

The abrasive wear resistance of white cast iron was studied. The iron was solidified using two solidification rates of 1.5 and 15 degrees C/s. Mass loss was evaluated with tests of the type pin on abrasive disc using alumina of different sizes. Two matrices were tested: one predominantly austenitic and the other predominantly martensitic, containing M(3)C carbides. Samples with cooling rate of 15 degrees C/s showed higher hardness and more refined microstructure compared with those solidified at 1.5 degrees C/s. During the test, the movement of successive abrasives gave rise to the strain hardening of the austenite phase, leading to the attainment of similar levels of surface hardness, which explains why the wear rate showed no difference compared to the austenite samples with different solidification rates. For the austenitic matrix the wear rate seems to depend on the hardness of the worn surface and not on the hardness of the material without deformation. The austenitic samples showed cracking and fracture of M(3)C carbides. For the predominantly martensitic matrix, the wear rate was higher at the solidification rate of 1.5 degrees C/s, for grain size of 66 and 93 mu m. Higher abrasive sizes were found to produce greater penetration and strain hardening of austenitic matrices. However, martensitic iron produces more microcutting, increasing the wear rate of the material. The analysis of the worn surface by scanning electron microscopy indicated abrasive wear mechanisms such as: microcutting, microfatigue and microploughing. Yet, for the iron of austenitic matrix, the microploughing mechanism was more severe. (C) 2009 Elsevier B.V. All rights reserved.

Sustained competitive advantage of different sized multinational corporations in rural base of the pyramid markets

This thesis explores how multinational corporations of different sizes create barriers to imitation and therefore sustain competitive advantage in rural and informal Base of the Pyramid economies. These markets require close cooperation with local partners in a dynamic environment that lacks imposable property rights and follows a different rationale than developed markets. In order to explore how competitive advantage is sustained by different sized multinational corporations at the Base of the Pyramid, the natural-resource-based view and the dynamic capabilities perspective are integrated. Based on this integration the natural-resource-based view is extended by identifying critical dynamic capabilities that are assumed to be sources of competitive advantage at the Base of the Pyramid. Further, a contrasting case study explores how the identified dynamic capabilities are protected and their competitive advantage is sustained by isolating mechanisms that create barriers to imitation for a small to medium sized and a large multinational corporation. The case study results give grounds to assume that most resource-based isolating mechanisms create barriers to imitation that are fairly high for large and established multinational corporations that operate at the rural Base of the Pyramid and have a high product and business model complexity. On the contrary, barriers to imitation were found to be lower for young and small to medium sized multinational corporations with low product and business model complexity that according to some authors represent the majority of rural Base of the Pyramid companies. Particularly for small to medium sized multinational corporations the case study finds a relationship- and transaction-based unwillingness of local partners to act opportunistically rather than a resource-based inability to imitate. By offering an explanation of sustained competitive advantage for small to medium sized multinational corporations at the rural Base of the Pyramid this thesis closes an important research gap and recommends to include institutional and transaction-based research perspectives.

Growth, cysts and kinetics of Borrelia garinii (Spirochaetales: Spirochaetacea) in different culture media

The aim of the present paper was to evaluate cyst formation and growth parameters of Borrelia garinii in a range of media differing in formulation and cost. A qualitative assessment of morphology and motility of B. garinii was conducted. All media were prepared aseptically and used in test tubes or Petri dishes. For each medium, the initial spirochete concentration was standardized to 10³ spirochets/mL. The following culture media were suitable to grow B. garinii: Barbour-Stoenner-Kelly, brain heart infusion and PMR. Growth was minimal at six weeks post-inoculation and maximum spirochete density was observed between 9-12 weeks. Often, the cultures developed cysts of different sizes, isolated or in groups, with a spiraled portion of variable sizes, mainly in unfavorable culture media. Brazilian Lyme disease-like illness, also known as Baggio-Yoshinari syndrome (BYS), is a new and interesting emerging tick-borne disease, caused by Borrelia burgdorferi sensu lato spirochetes, only during its cystic forms. It has been assumed that the peculiar clinical and laboratory features of BYS are consequential to the absence of a human sucker Ixodes ricinus complex tick at risk areas in Brazil, supporting the concept that the borrelia phenotypic expression pattern is modified as it is transmitted through the host.

Management of basic health units in municipalities of different size: profile and management instruments

Objective To identify the characteristics of managers and their use of management instruments in primary care and to analyze differences in these features among municipalities of different sizes. Method The present cross-sectional descriptive study was conducted at 108 basic health units from 21 municipalities in northern Paraná, Brazil. The data were collected using a semi-structured questionnaire during the second half of 2010. Results Most managers had graduate degrees and were female and nurses. The managers from the small municipalities were younger, their payment was lower, and they had less work experience. The use of management instruments was expressive for both the organization and work management; however, the instruments were used less in the small municipalities. Conclusion The managers were committed to their role; it is recommended that policies and guidance should be formulated at the federal and state levels to support small municipalities.