Thermodynamic Study Of The Micellization Of Zwitterionic Surfactants And Their Interaction With Polymers In Water By Isothermal Titration Calorimetry.

The micellization of a homologous series of zwitterionic surfactants, a group of sulfobetaines, was studied using isothermal titration calorimetry (ITC) in the temperature range from 15 to 65 °C. The increase in both temperature and the alkyl chain length leads to more negative values of ΔGmic(0) , favoring the micellization. The entropic term (ΔSmic(0)) is predominant at lower temperatures, and above ca. 55-65 °C, the enthalpic term (ΔHmic(0)) becomes prevalent, figuring a jointly driven process as the temperature increases. The interaction of these sulfobetaines with different polymers was also studied by ITC. Among the polymers studied, only two induced the formation of micellar aggregates at lower surfactant concentration: poly(acrylic acid), PAA, probably due to the formation of hydrogen bonds between the carboxylic group of the polymer and the sulfonate group of the surfactant, and poly(sodium 4-styrenesulfonate), PSS, probably due to the incorporation of the hydrophobic styrene group into the micelles. The prevalence of the hydrophobic and not the electrostatic contributions to the interaction between sulfobetaine and PSS was confirmed by an increased interaction enthalpy in the presence of electrolytes (NaCl) and by the observation of a significant temperature dependence, the latter consistent with the proposed removal of hydrophobic groups from water.

Derivatives of 1,3,5-triamino-1,3,5-trideoxy-cis-inositas versatile pentadentate ligands for protein labeling with Re-186/188. Prelabeling, biodistribution, and X-ray structural studies

The pentadentate H(3)bhci [1,3,5-trideoxy-1,3-bis((2-hydroxybenzyl)amino)-cis-inistol] and its bifunctionalized analogue H(3)bhci-glu-H [1,3,5-trideoxy-1,3-bis((2-hydroxybenzyl)amino)-5-glutaramido-cis-inositol] were synthesized, and their coordination chemistry was investigated with inactive rhenium, with no carrier added Re-188 and with carrier added Re-186. The neutral Re(V) complexes [ReO-(bhci)] and [ReO(bhci-glu-H)] are formed in good yields starting from [ReOCl3(P(C6H5)(3))(2)] or in quantitative yield directly from [(ReO4)-Re-186/188](-) in aqueous solution by reduction with Sn(II) or Sn(0). The X-ray structures of [ReO(bhci)] and [ReO(bhci-glu-H)] were elucidated revealing pentadentate side on coordination of the ligands to the Re=O core. The basic cyclohexane frame adopts a chair form in the case of [ReO(bhci)] and a twisted boat form in the case of [ReO(bhci-glu-H)]. [ReO(bhci)] crystallizes in the monoclinic space group C2/c with a = 27.425(3), b = 14.185(1), c = 19.047(2) Angstrom, and beta = 103.64(2)degrees and [ReO(bhci-glu-H)] in the monoclinic space group P2(1)/c with a = 13.056(3), b = 10.180(1), c = 22.378(5) Angstrom and beta = 98.205(9)degrees Both Re-188 complexes are stable in human serum for at least 3 days without decomposition. After injection into mice, [ReO(bhci-glu)](-) is readily excreted through the intestines, while [ReO(bhci)] is excreted by intestines, liver, and the kidneys. TLC investigations of the urine showed exclusively the complexes [ReO(bhci-glu-H)] and [ReO(bhci)], respectively, and no decomposition products. For derivatization of antibodies, the carboxylic group of [ReO(bhci-glu-H)] was activated with N-hydroxysuccinimide, which required unusually vigorous reaction conditions (heating). The anti colon cancer antibody mAb-35 [IgG and F(ab')(2) fragment] was labeled with [(ReO)-Re-186/188(bhci-glu)] to a specific activity of up to 1.5 mCi/mg (55 MBq/mg) with full retention of immunoreactivity. Labeling yields followed pseudo-first-order kinetics in antibody concentration with the ratio of rates between aminolysis and hydrolysis being about 2. Biodistributions of Re-186-labeled intact mAb-35 as well as of its F(ab')(2) fragment in tumor-bearing nude mice revealed good uptake by the tumor with only low accumulation of radioactivity in normal tissue.

The contribution of phenolic acids to the anti-inflammatory activity of mushrooms: Screening in phenolic extracts, individual parent molecules and synthesized glucuronated and methylated derivatives

In the present study, the ethanolic extracts of fourteen edible mushrooms were investigated for their anti-inflammatory potential in LPS (lipopolysaccharide) activated RAW 264.7 macrophages. Furthermore the extracts were chemically characterized in terms of phenolic acids and related compounds. The identified molecules (p-hydroxybenzoic, p-coumaric and cinnamic acids) and their glucuronated and methylated derivatives obtained by chemical synthesis were also evaluated for the same bioactivity, in order to establish structure-activity relationships and to comprehend the effects of in vivo metabolism reactions in the activity of the compounds. The extracts of Pleurotus ostreatus, Macrolepiota procera, Boletus impolitus and Agaricus bisporus revealed the strongest anti-inflammatory potential (EC50 values 96 ± 1 to 190 ± 6 µg/mL, and also the highest concentration of cinnamic acid (656 to 156 µg/g), which was also the individual compound with the highest anti-inflammatory activity. The derivatives of p-coumaric acid revealed the strongest properties, specially the derivative methylated in the carboxylic group (CoA-M1) that exhibited similar activity to the one showed by dexamethaxone used as anti-inflammatory standard; by contrast, the derivatives of p-hydroxybenzoic revealed the lowest inhibition of NO production. All in all, whereas the conjugation reactions change the chemical structure of phenolic acids and may increase or decrease their activity, the glucuronated and methylated derivatives of the studied compounds are still displaying anti-inflammatory activity.

Combining protein identification and quantification: C-terminal isotope-coded tagging using sulfanilic acid.

Two methods of differential isotopic coding of carboxylic groups have been developed to date. The first approach uses d0- or d3-methanol to convert carboxyl groups into the corresponding methyl esters. The second relies on the incorporation of two 18O atoms into the C-terminal carboxylic group during tryptic digestion of proteins in H(2)18O. However, both methods have limitations such as chromatographic separation of 1H and 2H derivatives or overlap of isotopic distributions of light and heavy forms due to small mass shifts. Here we present a new tagging approach based on the specific incorporation of sulfanilic acid into carboxylic groups. The reagent was synthesized in a heavy form (13C phenyl ring), showing no chromatographic shift and an optimal isotopic separation with a 6 Da mass shift. Moreover, sulfanilic acid allows for simplified fragmentation in matrix-assisted laser desorption/ionization (MALDI) due the charge fixation of the sulfonate group at the C-terminus of the peptide. The derivatization is simple, specific and minimizes the number of sample treatment steps that can strongly alter the sample composition. The quantification is reproducible within an order of magnitude and can be analyzed either by electrospray ionization (ESI) or MALDI. Finally, the method is able to specifically identify the C-terminal peptide of a protein by using GluC as the proteolytic enzyme.

Stabilization of the ionic form of weak acid cation exchange resins

Weak acid cation exchange (WAC) resins are used in the chromatographic separation of betaine from vinasse, a by-product of sugar industry. The ionic form of the resin determines the elution time of betaine. When a WAC-resin is in hydrogen form, the retention time of betaine is the longest and betaine elutes as the last component of vi-nasse from the chromatographic column. If the feed solution contains salts and its pH is not acidic enough to keep the resin undissociated, the ionic form of the hydrogen form resin starts to alter. Vinasse contains salts and its pH is around 5, it also contains weak acids. To keep the metal ion content (Na/H ratio) of the resin low enough to ensure successful separation of betaine, acid has to be added to either eluent (water) or vinasse. The aim of the present work was to examine by laboratory experiments which option requires less acid. Also the retention mechanism of betaine was investigated by measuring retention volumes of acetic acid and choline in different Na/H ratios of the resin. It was found that the resulting ionic form of the resin is the same regardless of whether the regeneration acid is added to the eluent or the feed solution (vinasse). Be-sides the salt concentration and the pH of vinasse, also the concentration of weak acids in the feed affects the resulting ionic form of the resin. The more buffering capacity vinasse has, the more acid is required to keep the ionic form of the resin desired. Vinasse was found to be quite strong buffer solution, which means relatively high amounts of acid are required to prevent the Na/H ratio from increasing too much. It is known that the retention volume of betaine decreases significantly, when the Na/H ratio increases. This is assumed to occur, because the amount of hydrogen bonds between the carboxylic groups of betaine and the resin decreases. Same behavior was not found with acetic acid. Choline has the same molecular structure as betaine, but instead of carboxylic group it has hydroxide group. The retention volume of choline increased as the Na/H ratio of the resin increased, because of the ion exchange reaction between choline cation and dissociated carboxylic group of the resin. Since the retention behavior of choline on the resin is opposite to the behavior of be-taine, the strong affinity of betaine towards hydrogen form WAC-resin has to be based on its carboxylic group. It is probable that the quaternary ammonium groups also affect the behavior of the carboxylic groups of betaine, causing them to form hydrogen bonds with the carboxylic groups of the resin.

Adsorption of glyphosate in a forest soil: a study using Mössbauer and FT-IR spectroscopy

We studied the adsorption of glyphosate (GPS) onto soil mineral particles, using FT-IR and Mössbauer spectroscopy. From IR measurements for samples collected under native vegetation of a forest reserve, bands at 1632 and 1407 cm-1 could be attributed to the interaction between the carboxylic group of GPS and structural Al3+ and Fe3+ on the surface of mineral particles; bands at 1075 and 1000 cm-1 were observed only for cultivated soil. Mössbauer spectra for these soils were definitely fitted using a broad central doublet in addition to the magnetic component. This multiple quadrupolar component may be attributed to all non-magnetic Fe3+ contributions, including that of the GPS/Fe3+ complex.

Chemical changes in biomass during torrefaction

Torrefaction is moderate thermal treatment (~200-300 °C) of biomass in an inert atmosphere. The torrefied fuel offers advantages to traditional biomass, such as higher heating value, reduced hydrophilic nature, increased its resistance to biological decay, and improved grindability. These factors could, for instance, lead to better handling and storage of biomass and increased use of biomass in pulverized combustors. In this work, we look at several aspects of changes in the biomass during torrefaction. We investigate the fate of carboxylic groups during torrefaction and its dependency to equilibrium moisture content. The changes in the wood components including carbohydrates, lignin, extractable materials and ashforming matters are also studied. And at last, the effect of K on torrefaction is investigated and then modeled. In biomass, carboxylic sites are partially responsible for its hydrophilic characteristic. These sites are degraded to varying extents during torrefaction. In this work, methylene blue sorption and potentiometric titration were applied to measure the concentration of carboxylic groups in torrefied spruce wood. The results from both methods were applicable and the values agreed well. A decrease in the equilibrium moisture content at different humidity was also measured for the torrefied wood samples, which is in good agreement with the decrease in carboxylic group contents. Thus, both methods offer a means of directly measuring the decomposition of carboxylic groups in biomass during torrefaction as a valuable parameter in evaluating the extent of torrefaction. This provides new information to the chemical changes occurring during torrefaction. The effect of torrefaction temperature on the chemistry of birch wood was investigated. The samples were from a pilot plant at Energy research Center of the Netherlands (ECN). And in that way they were representative of industrially produced samples. Sugar analysis was applied to analyze the hemicellulose and cellulose content during torrefaction. The results show a significant degradation of hemicellulose already at 240 °C, while cellulose degradation becomes significant above 270 °C torrefaction. Several methods including Klason lignin method, solid state NMR and Py-GC-MS analyses were applied to measure the changes in lignin during torrefaction. The changes in the ratio of phenyl, guaiacyl and syringyl units show that lignin degrades already at 240 °C to a small extent. To investigate the changes in the extractives from acetone extraction during torrefaction, gravimetric method, HP-SEC and GC-FID followed by GC-MS analysis were performed. The content of acetone-extractable material increases already at 240 °C torrefaction through the degradation of carbohydrate and lignin. The molecular weight of the acetone-extractable material decreases with increasing the torrefaction temperature. The formation of some valuable materials like syringaresinol or vanillin is also observed which is important from biorefinery perspective. To investigate the change in the chemical association of ash-forming elements in birch wood during torrefaction, chemical fractionation was performed on the original and torrefied birch samples. These results give a first understanding of the changes in the association of ashforming elements during torrefaction. The most significant changes can be seen in the distribution of calcium, magnesium and manganese, with some change in water solubility seen in potassium. These changes may in part be due to the destruction of carboxylic groups. In addition to some changes in water and acid solubility of phosphorous, a clear decrease in the concentration of both chlorine and sulfur was observed. This would be a significant additional benefit for the combustion of torrefied biomass. Another objective of this work is studying the impact of organically bound K, Na, Ca and Mn on mass loss of biomass during torrefaction. These elements were of interest because they have been shown to be catalytically active in solid fuels during pyrolysis and/or gasification. The biomasses were first acid washed to remove the ash-forming matters and then organic sites were doped with K, Na, Ca or Mn. The results show that K and Na bound to organic sites can significantly increase the mass loss during torrefaction. It is also seen that Mn bound to organic sites increases the mass loss and Ca addition does not influence the mass loss rate on torrefaction. This increase in mass loss during torrefaction with alkali addition is unlike what has been found in the case of pyrolysis where alkali addition resulted in a reduced mass loss. These results are important for the future operation of torrefaction plants, which will likely be designed to handle various biomasses with significantly different contents of K. The results imply that shorter retention times are possible for high K-containing biomasses. The mass loss of spruce wood with different content of K was modeled using a two-step reaction model based on four kinetic rate constants. The results show that it is possible to model the mass loss of spruce wood doped with different levels of K using the same activation energies but different pre-exponential factors for the rate constants. Three of the pre-exponential factors increased linearly with increasing K content, while one of the preexponential factors decreased with increasing K content. Therefore, a new torrefaction model was formulated using the hemicellulose and cellulose content and K content. The new torrefaction model was validated against the mass loss during the torrefaction of aspen, miscanthus, straw and bark. There is good agreement between the model and the experimental data for the other biomasses, except bark. For bark, the mass loss of acetone extractable material is also needed to be taken into account. The new model can describe the kinetics of mass loss during torrefaction of different types of biomass. This is important for considering fuel flexibility in torrefaction plants.

Optimisation de la concentration en électrolytes au sein des matrices à base de HASCA pour la libération prolongée

Le sel sodique du carboxyméthylamidon à haute teneur en amylose, HASCA (Amylose 60%-amylopectine 40%), est un polymère hydrophile ionique utilisé pour obtenir des comprimés matriciels à libération prolongée. Il est caractérisé par la formation d'un hydrogel lors de la mise en contact avec le milieu de dissolution. La libération du principe actif (PA) à travers ce polymère est principalement contrôlée par la diffusion fickienne et la relaxation du réseau polymérique. De plus, la solubilité du PA est un facteur qui permet de moduler la libération, cependant, la solubilité d’un médicament dépend de la forme utilisée et du pH. Les bases ou les acides libres présentent une solubilité moins élevée que leurs sels. Nous proposons d’étudier l’effet d’une combinaison entre le sel et la forme acide ou le sel et la forme alcaline dans le même comprimé matriciel d’HASCA. Comme objectif de ce travail, nous étudions l’influence de la nature du polymère sur le profil de libération de PA dans un milieu aqueux en gradient de pH à cause de la nature des matrices à base d’HASCA caractérisées par la présence de groupement carboxyliques, ionisés ou non selon l’acidité du milieu de dissolution. Nous étudions également l’influence de la nature du PA (base libre ou son sel vs acide libre ou son sel) sur le profil de libération, ceci en sélectionnant des PAs modèles représentatifs de chaque catégorie. L’influence de changement de proportions entre la forme libre (acide ou base) et son sel sur le profil de libération est aussi investiguée. Pour ce, des comprimés à base de HASCA avec des proportions différentes de, soit le naproxène acide et le naproxène de sodium (PA acide et son sel), soit la tétracycline et le chlorhydrate de tétracycline (PA alcalin et son sel) ont été utilisés. Ceux-ci sont évalués lors des tests de dissolution dans un milieu simulant le milieu gastro-intestinal, selon les normes de l’USP (spectrophotométrie UV). Nous avons également menés des études de vitesse de dissolution intrinsèque sur les PAs purs, afin de déterminer leur solubilité et vitesse de libération dans les même pH de dissolution étudiés. Nous avons réussit d’obtenir des comprimés matriciels à base de HASCA convenables à être administrés une fois par jour en utilisant une combinaison du naproxène acide et son sel comme PA. Tandis que les résultats ont montré qu’en utilisant la tétracycline et son sel, les temps de libération étaient trop élevés pour permettre la réalisation d’une formulation convenable pour une administration quotidienne unique

Síntesi, caracterització química i estudi de l'activitat biològica de nous complexos de Pt(II) amb lligands de tipus diaminocarboxílic i els respectius ésters i derivats peptídics

El cisplatí, PtCl2(NH3)2, ha estat una de les drogues més utilitzades en la quimioteràpia del càncer des del descobriment de la seva activitat. Però degut a la seva alta toxicitat i greus efectes secundaris, s'han sintetitzat nous compostos amb la finalitat de reduir aquests inconvenients. En aquest sentit, el treball desenvolupat en aquesta tesi doctoral ha estat la síntesi i caracterització de tretze complexos de Pt(II) amb la finalitat d'estudiar llur activitat antitumoral. Aquests complexos presenten unes característiques estructurals comunes: geometria cis, dos lligands làbils de tipus clorur i un lligand diaminoquelatant derivat dels àcids d,l-2,3-diaminopropiònic (Hdap) i d,l-2,4-diaminobutíric (Hdab). S'han dissenyat unes estratègies sintètiques a partir de les quals els lligands han estat funcionalitzats amb diferents grups de tipus éster, aminoàcid i peptídic: Etdap·2HCl, Etdab·2HCl, [(dap-Metala)·2CF3COOH], [(dab-Metala)·2CF3COOH], [(dap-phe)·2CF3COOH], [(dab-phe)·2CF3COOH], [(dap-Mettrp)·2CF3COOH], [(dab-Mettrp)·2CF3COOH], [(dap-ASTTTNYT-NH2)·2CF3COOH], essent Metala= éster metílic de L-alanina, phe= L-fenilalanina, Mettrp= éster metílic del L-triptofà. Aquests lligands diaminoquelatants s'han utilitzat per sintetitzar els corresponents complexos de Pt(II): PtCl2(Hdap), PtCl2(Hdab), PtCl2(Etdap), PtCl2(Etdab), PtCl2(dap-Metala), PtCl2(dab-Metala), PtCl2(dap-ala), PtCl2(dab-ala), PtCl2(dap-phe), PtCl2(dab-phe), PtCl2(dap-Mettrp), PtCl2(dab-Mettrp), PtCl2(dap-ASTTTNYT-NH2). A través de diferents tècniques i assaigs biològics (dicroisme circular, electroforesi en gel d'agarosa, microscopia de forces atòmiques, citometria de flux, assaigs de proliferació cel·lular) s'ha pogut demostrar l'activitat antitumoral d'aquests compostos. A través de la tècnica de dicroisme circular (DC) s'ha pogut demostrar que els lligands lliures no interaccionen covalentment amb el DNA de Calf Thymus i no modifiquen l'estructura secundària de la doble hèlix. En canvi, els respectius complexos han demostrat tenir capacitat per interaccionar amb el DNA i modificar la seva estructura secundària. Els complexos PtCl2(Hdap), PtCl2(Hdab) i PtCl2(dab-phe) mostren un comportament similar al cisplatí, generant adductes cis-bifuncionals que distorcionen la doble hèlix de forma no desnaturalitzant amb obertura de la doble cadena. Els complexos PtCl2(Etdap), PtCl2(Etdab), PtCl2(dap-ala), PtCl2(dab-ala), PtCl2(dap-Metala), PtCl2(dab-Metala), PtCl2(dap-phe), PtCl2(dap-ASTTTNYT-NH2) quan interaccionen amb el DNA generen un canvi en la conformació del DNA de la forma B a la forma C, produint-se un augment de la curvatura de l'hèlix per rotació de les bases nitrogenades. En aquests estudis s'ha comprovat que l'estructura del complex influeix en l'efecte generat sobre l'estructura secundària de l'àcid nucleic. En primer lloc, existeix una diferència en el comportament en funció del tamany del lligand diaminoquelatant, de manera que els complexos amb el lligand (dab) provoquen un efecte més remarcable. També s'observa aquest canvi de comportament al passar dels complexos que tenen el grup funcional esterificat als que el tenen protonat. D'aquesta manera, s'observa un major efecte sobre l'estructura secundària del DNA en aquells complexos que tenen el lligand diaminoquelatant de tres metilens (dab) i amb el grup carboxilat terminal protonat. Per tal de modelitzar la interacció d'aquests complexos amb el DNA, s'ha estudiat la interacció d'aquests compostos de Pt(II) amb 5'-GMP a través de RMN-1H, observant la variació dels senyals corresponents al H8 de 5'-GMP. Així s'ha pogut demostrar que aquests compostos interaccionen amb la 5'-GMP a través d'un enllaç covalent Pt-N7, de la mateixa manera a com interacciona el cisplatí. A través d'electroforesi en gel d'agarosa i microscopia de forces atòmiques (AFM) s'ha pogut determinar l'efecte que generen els lligands lliures i els respectius complexos de Pt(II) sobre l'estructura terciària del plasmidi pBR322. Els lligands provoquen un augment de l'agregació de les molècules de DNA i un lleuger augment de la compactació de l'estructura terciària. Aquests resultats s'atribueixen a la capacitat d'aquests compostos a interaccionar per pont d'hidrogen amb el DNA. Els corresponents complexos de Pt(II) provoquen un augment de l'agregació i una important compactació, degut per una banda a la capacitat de l'àtom de Pt a interaccionar covalentment amb el DNA, i per altra banda, a la capacitat del lligand a interaccionar per pont d'hidrogen amb l'àcid nucleic. Finalment s'ha estudiat l'activitat citotòxica d'aquests complexos de Pt(II) en diferents línies cel·lulars: A431 (línia de carcinoma epidermoide), HeLa (línia de carcinoma de coll d'úter) i HL-60 (línia promielocítica de leucèmia). Els complexos moderadament solubles en aigua, PtCl2(Hdap), PtCl2(Hdab), PtCl2(dap-ala), PtCl2(dab-ala), PtCl2(dap-phe) i PtCl2(dab-phe), han demostrat ser actius. L'activitat depèn de la concentració de complex, del temps d'incubació i de la línia cel·lular. Per temps d'incubació alts i concentracions de complex elevades s'observa la màxima activitat. Els complexos de l'alanina, PtCl2(dap-ala) i PtCl2(dab-ala), són els que mostren més activitat, mentre que els compostos de la fenilalanina són els menys actius, degut probablement a la voluminositat del lligand, la qual pot impedir o dificultar el transport del compost a través de la membrana cel·lular. L'activitat citotòxica dels complexos insolubles en aigua, PtCl2(Etdap) i PtCl2(Etdab), queda bloquejada per l'elevada concentració de DMSO (12%) necessària per solubilitzar els compostos. Aquests resultats permeten deduir que la presència d'un 12% de DMSO anul·la l'activitat d'aquests complexos, ja que el DMSO pot coordinar-se amb el Pt ocupant les posicions làbils del complex i evitant que es pugui coordinar amb el DNA. Els assaigs de proliferació cel·lular del complex PtCl2(dap-ASTTTNYT-NH2) i del pèptid lliure ASTTTNYT-NH2 han demostrat que ambdós compostos són actius. Tot i això, l'activitat del complex és superior a la del pèptid lliure, ja que el Pt pot interaccionar covalentment amb el DNA i augmentar l'efecte citotòxic. Per tant, el complex presenta un lligand portador biològicament actiu que pot transportar el metall a través de la membrana cel·lular i facilitar així la seva interacció amb el DNA. A través de la tècnica de citometria de flux s'ha comprovat que en tots els casos la mort cel·lular produïda pels complexos ha estat per apoptosi. Per últim, s'ha sintetitzat i caracteritzat un complex trinuclear de Pt(II), {[Pt(Me2Bpy)2][PtCl2(Me2Bpy)]2}, essent Me2Bpy= 4,4'-dimetil-2,2'-dipiridil. La resolució de la seva estructura per difracció de Raig-X ha permès determinar l'existència d'una interacció intramolecular Pt-Pt de 3.474 Å.

Reaction pathway to the synthesis of anatase via the chemical modification of titanium isopropoxide with acetic acid

Anatase nanoparticles were obtained through a modified sol-gel route from titanium isopropoxide modified with acetic acid in order to control hydrolysis and condensation reactions. The modification of Ti(O(i)Pr)(4) with acetic acid reduces the availability of groups that hydrolyze and condense easily through the formation of a stable complex whose structure was determined to be Ti(OCOCH(3))(O(i)Pr)(2) by means of FTIR and (13)C NMR. The presence of this complex was confirmed with FTIR in the early stages of the process. A doublet in 1542 and 1440 cm(-1) stands for the asymmetric and symmetric stretching vibrations of the carboxylic group coordinated to Ti as a bidentate ligand. The gap of 102 cm(-1) between these signals suggests that acetate acts preferentially as a bidentate rather than as a bridging ligand between two titanium atoms. The use of acetic acid as modifier allows the control of both the degree of condensation and oligomerization of the precursor and leads to the preferential crystallization of TiO(2) in the anatase phase. A possible reaction pathway toward the formation of anatase is proposed on the basis of the intermediate species present in a 1:1 Ti(O(i)Pr)(4):CH(3)COOH molar system in which esterification reactions that introduce H(2)O into the reaction mixture were seen to be negligible. The Rietveld refinement and TEM analysis revealed that the powder is composed of isotropic anatase nanocrystallites.

Carbon nanotube-reinforced siloxane-PMMA hybrid coatings with high corrosion resistance

Siloxane-polymethyl methacrylate hybrid films containing functionalized multiwall carbon nanotubes (CNTs) were deposited by dip-coating on carbon steel substrates from a sol prepared by radical polymerization of methyl methacrylate and 3-methacryloxy propyl-trimethoxysilane, followed by hydrolytic co-polycondensation of tetraethoxysilane. The correlation between the structural properties and corrosion protection efficiency was studied as a function of the molar ratio of nanotubes carbon to silicon, varied in the range between 0.1% and 5%. 29Si nuclear magnetic resonance and thermogravimetric measurements have shown that hybrids containing carbon nanotubes have a similar degree of polycondensation and thermal stability as the undoped matrix and exhibit and excellent adhesion to the substrate. Microscopy and X-ray photoelectron spectroscopy results revealed a very good dispersion of carbon nanotubes in the hybrid matrix and the presence of carboxylic groups allowing covalent bonding with the end-siloxane nodes. Potentiodynamic polarization curves and electrochemical impedance spectroscopy results demonstrate that CNTs containing coatings maintain the excellent corrosion protection efficiency of the hybrids, showing even a superior performance in acidic solution. The nanocomposite structure acts as efficient corrosion barrier, increasing the total impedance by 4 orders of magnitude and reducing the current densities by more than 3 orders of magnitude, compared to the bare steel electrode. © 2013 Elsevier B.V. All rights reserved.

Evaluation of the chemical interaction between carbon nanotubes functionalized with TGDDM tetrafunctional resin and hardener DDS

In this work, the chemical interaction between carbon nanotubes (MWCNT) functionalized with acyl chloride (SOCl2) and polymer chain tetrafuncional N,N,N′,N′-tetraglycidyl-4,4′- diaminodiphenylmethane (TGDDM) and hardener 4,4′diaminodiphenyl sulfone (DDS) has been monitored by Fourier transform infrared spectroscopy (FTIR) with a attenuated total reflectance (ATR) coupled. MWCNT were obtained from the pyrolysis of a mixture of camphor and ferrocene into a oven. The functionalization process was done by oxidative treatment in order to incorporate carboxylic group over the walls of MWCNT, before to be used SOCl2. The functionalized carbon nanotubes were evaluated by X-ray photoelectron spectroscopy (XPS), Raman and transmission electron microscopy (TEM). Nanostructured composites were processed by using epoxy resin with MWCNT in varying percentages. In this work it was observed that different percentages of functionalized nanotubes modify the interaction between the composite matrix and curing agent, where can be observed that in specimens with content less than 1 wt% MWCNT the chemical bond occurs preferentially from the opening of the SO double bond of the hardener and when is used MWCNT content higher than 1 wt% there is little chemical interaction with the SO bond of the hardener and most MWCNT binds to amine. © 2013 Elsevier Ltd.

Complexos de zinco(II), de európio(III) e heterobimetálico com os ácidos tiofeno 2 e 3-carboxílico. Síntese, caracterização e propriedades luminescentes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Sintesi di PNA a libertà conformazionale ridotta

The present work started a research project aimed at the synthesis of conformationally “locked” PNA (Peptide Nucleic Acids) monomers. Compared to classic aeg-PNA, this structural modification would result in an improvement in the pairing properties with natural nucleic acids, due to entropic variations in the process. Specifically, an attempt was made to build a PNA monomer around a β-lactam ring. That ring could be imagined as obtained by linking the methylene groups in α position of both the nucleobase and the carboxyl function. These structural properties would imply pre-organization of the final oligomer, improving the pairing process in biological systems. The first step of this work was the investigation of the Staudinger reaction for the ciclization of the lactam ring, and in particular the activation method of the carboxylic group of the nucleobase derivatives. Use of triazine chloride led to the synthesis of the adenine-based β-lactam-PNA. Attempts to synthesize the same monomer based on cytosine, guanine and thymine were unsuccessful, so alternative methods for carboxylic group activation were investigated. Conversion of carboxylic acids to acyl chlorides led to a partial result: despite the method worked well with analogues of the final reactants, it didn’t worked with substrates needed for lactam based PNAs. Search for a valid activation process continued involving carbonyl diimidazole, Mukayama reagent, and LDA (with methylester derivative of nucelobase) without good results. Last, it was investigated a different synthetic approach by first synthesizing a proper backbone with a chlorine in the β- lactam ring. This chlorine ring should undergo substitution by a nucleobase anion to give the desired PNA monomer. Unluckily also this synthetic route didn’t lead to the desired monomers.

High Aluminum Resistance in Buckwheat1 : II. Oxalic Acid Detoxifies Aluminum Internally

Buckwheat (Fagopyrum esculentum Moench. cv Jianxi), which shows high Al resistance, accumulates Al in the leaves. The internal detoxification mechanism was studied by purifying and identifying Al complexes in the leaves and roots. About 90% of Al accumulated in the leaves was found in the cell sap, in which the dominant organic acid was oxalic acid. Purification of the Al complex in the cell sap of leaves by molecular-sieve chromatography resulted in a complex with a ratio of Al to oxalic acid of 1:3. A 13C-nuclear magnetic resonance study of the purified cell sap revealed only one signal at a chemical shift 164.4 ppm, which was assigned to the Al-chelated carboxylic group of oxalic acid. A 27Al-nuclear magnetic resonance analysis revealed one major signal at the chemical shift of 16.0 to 17.0 ppm, with a minor signal at the chemical shift of 11.0 to 12 ppm in both the intact roots and their cell sap, which is consistent with the Al-oxalate complexes at 1:3 and 1:2 ratios, respectively. The purified cell sap was not phytotoxic to root elongation in corn (Zea mays). All of these results indicate that Al tolerance in the roots and leaves of buckwheat is achieved by the formation of a nonphytotoxic Al-oxalate (1:3) complex.