Effect of the C-factor and Dentin Preparation Method in the Bond Strength of a Mild Self-etch Adhesive

This study evaluated the effect of the C-factor and dentin preparation method (DPM) in the bond strength (BS) of a mild self-etch adhesive; the study also observed the SEM superficial aspects of the corresponding smear layer. For purposes of this study, 25 molars (n=5) were used in a bond strength test. The molars were divided into two parts (buccal and lingual): one part received a Class V cavity (C-factor=3) and the other received a flat surface (C-factor=0) with the same bur type (coarse diamond or carbide bur and fine diamond or carbide bur), both within the same dentin depth. Five teeth were prepared with wet 60-grit and 600-grit SiC papers. After restoration with Clearfil SE Bond, microtensile beans (0.8 mm(2)) were prepared and tested after 24 hours in a universal testing machine (0.5 mm/minute). An additional two teeth for each DPM were prepared for SEM evaluation of the smear layer superficial aspects. The BS values were submitted to one-way ANOVA, considering only the DPM (flat surfaces) and two-way ANOVA (C-Factor x DPM, considering only burs) with p=0.05. Although the DPM in the flat surfaces was not significant, the standard deviations of carbide bur-prepared specimens were markedly lower. The BS was significantly lower in cavities. The fine carbide bur presented the most favorable smear layer aspect. It was concluded that different dentin preparation methods could not prevent the adverse effect in bond strength of a high C-factor. A coarse cut carbide bur should be avoided prior to a mild self-etch adhesive, because it adversely affected bond strength. In contrast, a fine cut carbide bur provided the best combination: high bond strength with low variability, which suggests a more reliable bond strength performance.

Influence of resin composite insertion technique in preparations with a high C-factor

Objective: To evaluate the marginal microleakage in enamel and dentin/cementum walls in preparations with a high C-factor, using 3 resin composite insertion techniques. The null hypothesis was that there is no difference among the 3 resin composite insertion techniques. Method and Materials: Standardized Class 5 cavities were prepared in the lingual and buccal aspects of 30 caries-free, extracted third molars. The prepared teeth were randomly assigned to 3 groups: (1) oblique incremental placement technique, (2) horizontal incremental placement technique, and (3) bulk insertion (single increment). The preparations were restored with a 1-bottle adhesive (Single Bond, 3M ESPE) and microhybrid resin composite (Z100, 3M ESPE). Specimens were isolated with nail varnish except for a 2-mm-wide rim around the restoration and thermocycled (1,000 thermal cycles, 5°C/55°C; 30-second dwell time). The specimens were immersed in an aqueous solution of 50 wt% silver nitrate for 24 hours, followed by 8 hours in a photo-developing solution and evaluated for microleakage using an ordinal scale of 0 to 4. The microleakage scores obtained from occlusal and gingival walls were analyzed with Wilcoxon and Kruskal-Wallis nonparametric tests. Results: The null hypothesis was accepted. The horizontal incremental placement technique, the oblique incremental technique, and bulk insertion resulted in statistically similar enamel and dentin microleakage scores. Conclusion: Neither the incremental techniques nor the bulk placement technique were capable of eliminating the marginal microleakage in preparations with a high C-factor.

Low shrinkage composite resins: influence on sealing ability in unfavorable C-factor cavities

The present investigation observed the sealing ability of low shrinkage composite resins in large and deep cavities, placed and photocured in one increment. Large, deep cavities (5.0 mm diameter and 2.5 mm deep) surrounded by enamel were prepared in bovine teeth, which were then divided into five groups. Groups 1, 2, 3 and 4: acid conditioning + Adper Single Bond (3M/ESPE, St Paul, MN, USA) and restoration with Aelite LS Posterior (BISCO Inc. Schaumburg, IL, USA) (G1); Filtek Z-350 (3M/ESPE,St Paul, MN, USA) (G2); Filtek Z-350 Flow (3M/ESPE, St Paul, MN, USA) (G3); Premisa (KERR Corporation, Orange, CA, USA) (G4). Group 5: Silorane Adhesive system (3M/ESPE, St Paul, MN, USA) + restoration with Filtek Low Shrinkage Posterior P90 (3M/ESPE, St Paul, MN, USA). After polymerization, the teeth were immersed in 0.5% basic fuchsine solution and immediately washed. Using the Imagetool Software, the extent of dye along the margins was calculated as a percentage of total perimeter. The restorations were then transversally sectioned and the depth of dye penetration was calculated in mm, using the same software. Kruskal-Wallis analysis for all groups showed no statistical differences for extent (p = 0.54) or depth (p = 0.8364) of dye penetration. According to this methodology, the so-called low shrinkage composite resins had the same sealing ability compared to regular and flowable nanocomposite materials.

Impact of Quantity of Resin, C-factor, and Geometry on Resin Composite Polymerization Shrinkage Stress in Class V Restorations

Objective: This study evaluated the effect of quantity of resin composite, C-factor, and geometry in Class V restorations on shrinkage stress after bulk fill insertion of resin using two-dimensional finite element analysis.Methods: An image of a buccolingual longitudinal plane in the middle of an upper first premolar and supporting tissues was used for modeling 10 groups: cylindrical cavity, erosion, and abfraction lesions with the same C-factor (1.57), a second cylindrical cavity and abfraction lesion with the same quantity of resin (QR) as the erosion lesion, and then all repeated with a bevel on the occlusal cavosurface angle. The 10 groups were imported into Ansys 13.0 for two-dimensional finite element analysis. The mesh was built with 30,000 triangle and square elements of 0.1 mm in length for all the models. All materials were considered isotropic, homogeneous, elastic, and linear, and the resin composite shrinkage was simulated by thermal analogy. The maximum principal (MPS) and von Mises stresses (VMS) were analyzed for comparing the behavior of the groups.Results: Different values of angles for the cavosurface margin in enamel and dentin were obtained for all groups and the higher the angle, the lower the stress concentration. When the groups with the same C-factor and QR were compared, the erosion shape cavity showed the highest MPS and VMS values, and abfraction shape, the lowest. A cavosurface bevel decreased the stress values on the occlusal margin. The geometry factor overcame the effects of C-factor and QR in some situations.Conclusion: Within the limitations of the current methodology, it is possible to conclude that the combination of all variables studied influences the stress, but the geometry is the most important factor to be considered by the operator.

The influence of "C-factor" and light activation technique on polymerization contraction forces of resin composite

Objectives: This study evaluated the influence of the cavity configuration factor ("C-Factor") and light activation technique on polymerization contraction forces of a Bis-GMA-based composite resin (Charisma, Heraeus Kulzer). Material and Methods: Three different pairs of steel moving bases were connected to a universal testing machine (Emic DL 500): groups A and B - 2x2 mm (CF=0.33), groups C and D - 3x2 mm (CF=0.66), groups E and F - 6x2 mm (CF=1.5). After adjustment of the height between the pair of bases so that the resin had a volume of 12 mm(3) in all groups, the material was inserted and polymerized by two different methods: pulse delay (100 mW/cm(2) for 5 s, 40 s interval, 600 mW/cm(2) for 20 s) and continuous pulse (600 mW/cm(2) for 20 s). Each configuration was light cured with both techniques. Tensions generated during polymerization were recorded by 120 s. The values were expressed in curves (Force(N) x Time(s)) and averages compared by statistical analysis (ANOVA and Tukey's test, p<0.05). Results: For the 2x2 and 3x2 bases, with a reduced C-Factor, significant differences were found between the light curing methods. For 6x2 base, with high C-Factor, the light curing method did not influence the contraction forces of the composite resin. Conclusions: Pulse delay technique can determine less stress on tooth/restoration interface of adhesive restorations only when a reduced C-Factor is present.

C factor, a cell-surface-associated intercellular signaling protein, stimulates the cytoplasmic Frz signal transduction system in Myxococcus xanthus.

C factor, an intercellular signaling protein, is required for aggregation and sporulation of the social bacterium, Myxococcus xanthus. We report that C factor, which normally is associated with the cell surface, provides input to the Frz signal transduction cascade. Elements of this cascade have sequence homology to bacterial chemotaxis systems and are known to control the frequency of gliding reversal. Exposure of developing cells of a C-factor-less mutant (csgA) to purified C factor increases the ratio of methylated to nonmethylated FrzCD protein, the Frz homolog of the methyl-accepting chemotaxis proteins. Methylation depends on the cognate methyltransferase FrzF, and its extent increases with the concentration of C factor. C-factor-induced methylation also depends on the product of a gene, called class II, which is necessary in vivo for all known responses to C factor. A model for aggregation is proposed in which C factor stimulates the Frz cascade and thereby decreases cell reversals in a way that preferentially leads cells into an aggregate.

Soil and crop residue CO2-C emission under tillage systems in sugarcane-producing areas of southern Brazil

Appropriate management of agricultural crop residues could result in increases on soil organic carbon (SOC) and help to mitigate gas effect. To distinguish the contributions of SOC and sugarcane (Saccharum spp.) residues to the short-term CO2-C loss, we studied the infl uence of several tillage systems: heavy offset disk harrow (HO), chisel plow (CP), rotary tiller (RT), and sugarcane mill tiller (SM) in 2008, and CP, RT, SM, moldboard (MP), and subsoiler (SUB) in 2009, with and without sugarcane residues relative to no-till (NT) in the sugarcane producing region of Brazil. Soil CO2-C emissions were measured daily for two weeks after tillage using portable soil respiration systems. Daily CO2-C emissions declined after tillage regardless of tillage system. In 2008, total CO2-C from SOC and/or residue decomposition was greater for RT and lowest for CP. In 2009, emission was greatest for MP and CP with residues, and smallest for NT. SOC and residue contributed 47% and 41%, respectively, to total CO2-C emissions. Regarding the estimated emissions from sugarcane residue and SOC decomposition within the measurement period, CO2-C factor was similar to sugarcane residue and soil organic carbon decomposition, depending on the tillage system applied. Our approach may define new emission factors that are associated to tillage operations on bare or sugarcane-residue-covered soils to estimate the total carbon loss.

Caracterização da cobertura vegetal na equação universal de perda de solos (fator C) por meio de geotecnologias

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Perdas de solo e índices de vegetação: proposta metodológica para a determinação do fator C (MEUPS) em pastagens e cana-de-açúcar

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Polymorphisms in antithrombin and in tissue factor pathway inhibitor genes are associated with recurrent pregnancy loss

Recurrent pregnancy loss (RPL) is a multifactorial condition. The effect of antithrombin (SERPINC1), protein C (PROC), thrombomodulin (THBD) and tissue factor pathway inhibitor (TFPI) single nucleotide polymorphisms (SNPs) on the risk of RPL is thus far unknown. Our objective was to determine the association of SNPs in the above mentioned genes with RPL. We included 117 non-pregnant women with three or more consecutive losses prior to 20 weeks of pregnancy without a previous history of carrying a fetus to viability, and 264 healthy fertile non-pregnant women who had at least two term deliveries and no known pregnancy losses. The PROC (rs1799809 and rs1799808), SERPINC1 (rs2227589), THBD (rs1042579) and TFPI (rs10931292, rs8176592 and rs10153820) SNPs were analysed by Real Time PCR. Genotype frequencies for PROC 2418A > G, PROC 2405C > T, THBD 1418C > T, TFPI (T-33C and TFPI C-399T) SNPs were similar in cases and controls. The carriers of SERPINC1 786A allele (GA + AA genotypes) had an increased risk for RPL (odds ratio [OR]: 1.77, 95% confidence interval [CI]: 1.05-3.00, p=0.034) while women carrying the TFPI-287C allele (TC + CC genotypes) had a protection effect on having RPL (OR: 0.46, 95% CI: 0.26 - 0.83, p=0.009). The TCC haplotype for TFPI T-33C/TFPI T-287C/TFPI C-399T SNPs was less frequent in cases (5.7%) than in controls (11.6%) (OR: 0.45, 95% CI: 0.23 - 0.90, p=0.025). In conclusion, our data indicate that SERPINC1 786G > A variant increases the risk for RPL, while TFPI T-287C variant is protective; however, further studies are required to confirm our findings.

Anti-inflammatory and antinociceptive effects of Baccharis dracunculifolia DC (Asteraceae) in different experimental models

Aim of the study: The aerial parts of Baccharis dracunculifolia D.C., popularly known as ""alecrim do campo"" are used in folk medicine as anti-inflammatory. The aim of the present study was to evaluate the anti-inflammatory and antinociceptive activities of the crude hydroalcoholic extract obtained from leaves of Baccharis dracunculifolia (BdE), which have not been reported. Matetials and methods: BdE was analyzed by HPLC and in vivo evaluated (doses ranging from 50 to 400 mg/kg, p.o.) by using the acetic acid-induced abdominal constrictions, paw oedema induced by carrageenan or histamine, overt nociception models using capsaicin, glutamate or phorbol myristate acetate (PMA), formalin-induced nociception and mechanical hypernociception induced by carrageenan or complete Freund adjuvant (CFA). As positive controls it was used paracetamol in both acetic acid and formalin tests; dipyrone in capsaicin, glutamate and PMA-induced nociception; indomethacin in CFA and carrageenan-induced hypernociception models. In addition, the in vitro effects of BdE on COX-2 activity and on the activation of NF-kappa B were also evaluated. Results: BdE (50-400 mg/kg, p.o.) significantly diminished the abdominal constrictions induced by acetic acid, glutamate and CFA. Furthermore, BdE also inhibited the nociceptive responses in both phases of formalin-induced nociception. BdE, administered orally, also produced a long-lasting anti-hypernociceptive effect in the acute model of inflammatory pain induced by carrageenan. It was also observed the inhibition of COX-2 activity by BdE. Conclusion: In summary, the data reported in this work confirmed the traditional anti-inflammatory indications of Baccharis dracunculifolia leaves and provided biological evidences that Baccharis dracunculifolia, like Brazilian green propolis, possess antinociceptive and anti-inflammatory activities. (C) 2009 Elsevier Ireland Ltd. All rights reserved.

Predicting soil erosion using Rusle and NDVI time series from TM Landsat 5

The objective of this work was to evaluate the seasonal variation of soil cover and rainfall erosivity, and their influences on the revised universal soil loss equation (Rusle), in order to estimate watershed soil losses in a temporal scale. Twenty-two TM Landsat 5 images from 1986 to 2009 were used to estimate soil use and management factor (C factor). A corresponding rainfall erosivity factor (R factor) was considered for each image, and the other factors were obtained using the standard Rusle method. Estimated soil losses were grouped into classes and ranged from 0.13 Mg ha-1 on May 24, 2009 (dry season) to 62.0 Mg ha-1 on March 11, 2007 (rainy season). In these dates, maximum losses in the watershed were 2.2 and 781.5 Mg ha-1 , respectively. Mean annual soil loss in the watershed was 109.5 Mg ha-1 , but the central area, with a loss of nearly 300.0 Mg ha-1 , was characterized as a site of high water-erosion risk. The use of C factor obtained from remote sensing data, associated to corresponding R factor, was fundamental to evaluate the soil erosion estimated by the Rusle in different seasons, unlike of other studies which keep these factors constant throughout time.

The role of autolysis loop in determining the specificity of coagulation proteases

We recently demonstrated that the substitution of the autolysis loop (residues 143 to 154 in the chymotrypsin numbering system) of activated protein C (APC) with the corresponding loop of factor Xa (fXa) renders the APC mutant (APC/fX143-154) susceptible to inhibition by antithrombin (AT) in the presence of pentasaccharide. Our recent results further indicated, that in addition to an improvement in the reactivity of APC/fX143-154 with AT, both the amidolytic and anti-factor Va activities of the mutant APC have also been significantly increased. Since the autolysis loop of APC is five residues longer than the autolysis loop of fXa, it could not be ascertained whether this loop in the mutant APC specifically interacts with the activated conformation of AT or if a shorter autolysis loop is responsible for a global improvement in the catalytic activity of the mutant protease. To answer this question, we prepared another APC mutant in which the autolysis loop of the protease was replaced with the corresponding loop of trypsin (APC/Tryp143-154). Unlike an ~500-fold improvement in the reactivity of APC/fX143-154 with AT in the presence of pentasaccharide, the reactivity of APC/Tryp143-154 with the serpin was improved ~10-fold. These results suggest that both the length and structure of residues of the autolysis loop are critical for the specificity of the coagulation protease interaction with AT. Further factor Va inactivation studies with the APC mutants revealed a similar role for the autolysis loop of APC in the interaction with its natural substrate.

Esquizofrenia : síntomas positivos y negativos.

El objetivo central del presente trabajo es presentar la adaptación y validación realizada por nosotros de las escalas de síntomas positivos y negativos de la esquizofrenia, originadas por Andreasen (1981, 1982, 1984). 72 personas diagnosticadas de esquizofrenia. 54 varones y 18 mujeres de edades comprendidas entre los 20 y 60 años. Tiempo medio de hospitalización: 6,51 años, con un rango de 0 a 27 años. El trabajo se desarrolla en las siguientes partes: I. Marco teórico donde se recoge, en primer lugar, los síntomas y/o signos que se describen y caracterizan la psicopatología esquizofrénica. En segundo lugar, se trata de justificar el uso y utilidad de las clasificaciones diagnósticas, para pasar a continuación a la exposición de las gnoseologías psiquiátricas que consideramos de mayor relevancia, centrándonos en su fiabilidad y validez. En tercer lugar abordamos los acercamientos dimensionales que han sido propuestos para estudiar la esquizofrenia. De manera especial nos detuvimos en la perspectiva de síntomas positivos y negativos de la esquizofrenia. II. En ella exponemos la fiabilidad test-retest, la fiabilidad interjueces de todos y cada uno de los ítems que componen las escalas SAPS y SANS, de los factores que la conforman y de la puntuación global. Dentro de la fiabilidad, presentamos la consistencia interna de las escalas. En cuanto a la validez, presentamos datos sobre la validez de constructo, por medio de la estructura factorial de las escalas. También hallamos la validez convergente con los criterios del DMS -III- R y la validez discriminante de rendimiento cognitivo de los factores de las escalas. 1. Los distintos tipos de fiabilidad hallada en las escalas SAPS y SANS nos ofrecen índices lo suficientemente elevados como para poder sugerir la buena estabilidad temporal de la prueba, al menos durante seis meses, la elevada concordancia interjueces y la alta consistencia de sus elementos. 2. La validez de constructo ha aislado tres factores ortogonales: a. Factor negativo siendo el factor que más proporción de varianza explica, 36,5 por ciento; b. Factor positivo, que explica el 14 por ciento de la varianza; c. Factor desorganizado, explica el 8,6 por ciento de la varianza. La relación del factor positivo con el negativo es de signo negativo, es decir que parece existir una cierta incompatibilidad entre ambos. La relación entre el factor negativo con el factor desorganizado es alta. 3. En cuanto a la validez discriminante, los factores negativo y desorganizado tienen gran poder discriminativo en rendimiento cognitivo. No así el factor positivo, que parece que no cursa con deterioro cognitivo. 4. En cuanto a la validez concurrente de las escalas con los criterios diagnósticos del DMS III-R, queda establecida a la vista de los resultados. Las escalas de sintomatología esquizofrénica SAPS y SANS, guardan las propiedades de bondad psicométrica para ser utilizadas tanto en la investigación de la patología esquizofrénica como en labores diagnóstico en la asistencia clínica cotidiana.