Optimization of ultrasound-assisted extraction to obtain mycosterols from Agaricus bisporus L. by response surface methodology and comparison with conventional Soxhlet extraction

Ergosterol, a molecule with high commercial value, is the most abundant mycosterol in Agaricus bisporus L. To replace common conventional extraction techniques (e.g. Soxhlet), the present study reports the optimal ultrasound-assisted extraction conditions for ergosterol. After preliminary tests, the results showed that solvents, time and ultrasound power altered the extraction efficiency. Using response surface methodology, models were developed to investigate the favourable experimental conditions that maximize the extraction efficiency. All statistical criteria demonstrated the validity of the proposed models. Overall, ultrasound-assisted extraction with ethanol at 375 W during 15 min proved to be as efficient as the Soxhlet extraction, yielding 671.5 ± 0.5mg ergosterol/100 g dw. However, with n-hexane extracts with higher purity (mg ergosterol/g extract) were obtained. Finally, it was proposed for the removal of the saponification step, which simplifies the extraction process and makes it more feasible for its industrial transference.

Ultrasound and microwave assisted extraction of ergosterol from Agaricus bisporus L.: optimization through response surface methodology

There is scientific evidence demonstrating the benefits of mushrooms ingestion due to their richness in bioactive compounds such as mycosterols, in particular ergosterol [I]. Agaricus bisporus L. is the most consumed mushroom worldwide presenting 90% of ergosterol in its sterol fraction [2]. Thus, it is an interesting matrix to obtain ergosterol, a molecule with a high commercial value. According to literature, ergosterol concentration can vary between 3 to 9 mg per g of dried mushroom. Nowadays, traditional methods such as maceration and Soxhlet extraction are being replaced by emerging methodologies such as ultrasound (UAE) and microwave assisted extraction (MAE) in order to decrease the used solvent amount, extraction time and, of course, increasing the extraction yield [2]. In the present work, A. bisporus was extracted varying several parameters relevant to UAE and MAE: UAE: solvent type (hexane and ethanol), ultrasound amplitude (50 - 100 %) and sonication time (5 min-15 min); MAE: solvent was fixed as ethanol, time (0-20 min), temperature (60-210 •c) and solid-liquid ratio (1-20 g!L). Moreover, in order to decrease the process complexity, the pertinence to apply a saponification step was evaluated. Response surface methodology was applied to generate mathematical models which allow maximizing and optimizing the response variables that influence the extraction of ergosterol. Concerning the UAE, ethanol proved to be the best solvent to achieve higher levels of ergosterol (671.5 ± 0.5 mg/100 g dw, at 75% amplitude for 15 min), once hexane was only able to extract 152.2 ± 0.2 mg/100 g dw, in the same conditions. Nevertheless, the hexane extract showed higher purity (11%) when compared with the ethanol counterpart ( 4% ). Furthermore, in the case of the ethanolic extract, the saponification step increased its purity to 21%, while for the hexane extract the purity was similar; in fact, hexane presents higher selectivity for the lipophilic compounds comparatively with ethanol. Regarding the MAE technique, the results showed that the optimal conditions (19 ± 3 min, 133 ± 12 •c and 1.6 ± 0.5 g!L) allowed higher ergosterol extraction levels (556 ± 26 mg/100 g dw). The values obtained with MAE are close to the ones obtained with conventional Soxhlet extraction (676 ± 3 mg/100 g dw) and UAE. Overall, UAE and MAE proved to he efficient technologies to maximize ergosterol extraction yields.

Extraction and detection of mycotoxins in medicinal and aromatic plants: a case study with Aloysia citrodora P.

Plants frequently suffer contaminations by toxigenic fungi, and their mycotoxins can be produced throughout growth, harvest, drying and storage periods. The objective of this work was to validate a method for detection of toxins in medicinal and aromatic plants, through a fast and highly sensitive method, optimizing the joint co-extraction of aflatoxins (AF: AFB1, AFB2, AFG1 and AFG2) and ochratoxin A (OTA) by using Aloysia citrodora P. (lemon verbena) as a case study. For optimization purposes, samples were spiked (n=3) with standard solutions of a mix of the four AFs and OTA at 10 ng/g for AFB1, AFG1 and OTA, and at 6 ng/g of AFB2 and AFG2. Several extraction procedures were tested: i) ultrasound-assisted extraction in sodium chloride and methanol/water (80:20, v/v) [(OTA+AFs)1]; ii) maceration in methanol/1% NaHCO3 (70:30, v/v) [(OTA+AFs)2]; iii) maceration in methanol/1% NaHCO3 (70:30, v/v) (OTA1); and iv) maceration in sodium chloride and methanol/water (80:20, v/v) (AF1). AF and OTA were purified using the mycotoxin-specific immunoaffinity columns AflaTest WB and OchraTest WB (VICAM), respectively. Separation was performed with a Merck Chromolith Performance C18 column (100 x 4.6 mm) by reverse-phase HPLC coupled to a fluorescence detector (FLD) and a photochemical derivatization system (for AF). The recoveries obtained from the spiked samples showed that the single-extraction methods (OTA1 and AF1) performed better than co-extraction methods. For in-house validation of the selected methods OTA1 and AF1, recovery and precision were determined (n=6). The recovery of OTA for method OTA1 was 81%, and intermediate precision (RSDint) was 1.1%. The recoveries of AFB1, AFB2, AFG1 and AFG2 ranged from 64% to 110% for method AF1, with RSDint lower than 5%. Methods OTA1 and AF1 showed precision and recoveries within the legislated values and were found to be suitable for the extraction of OTA and AF for the matrix under study.

Optimization of microwave-assisted extraction of hydrophilic and lipophilic antioxidants from a surplus tomato crop by response surface methodology

Tomato is the second most important vegetable crop worldwide and a rich source of industrially interesting antioxidants. Hence, the microwave-assisted extraction of hydrophilic (H) and lipophilic (L) antioxidants from a surplus tomato crop was optimized using response surface methodology. The relevant independent variables were temperature (T), extraction time (t), ethanol concentration (Et) and solid/liquid ratio (S/L). The concentration-time response methods of crocin and β-carotene bleaching were applied, since they are suitable in vitro assays to evaluate the antioxidant activity of H and L matrices, respectively. The optimum operating conditions that maximized the extraction were as follows: t, 2.25 min; T, 149.2 ºC; Et, 99.1 %; and S/L, 45.0 g/L for H antioxidants; and t, 15.4 min; T, 60.0 ºC; Et, 33.0 %; and S/L, 15.0 g/L for L antioxidants. This industrial approach indicated that surplus tomatoes possess a high content of antioxidants, offering an alternative source for obtaining natural value-added compounds. Additionally, by testing the relationship between the polarity of the extraction solvent and the antioxidant activity of the extracts in H and L media (polarity-activity relationship), useful information for the study of complex natural extracts containing components with variable degrees of polarity was obtained.

Microwave-assisted extraction of phenolic acids and flavonoids and production of antioxidant ingredients from tomato: a nutraceutical-oriented optimization study

The production of natural extracts requires suitable processing conditions to maximize the preservation of the bioactive ingredients. Herein, a microwave-assisted extraction (MAE) process was optimized, by means of response surface methodology (RSM), to maximize the recovery of phenolic acids and flavonoids and obtain antioxidant ingredients from tomato. A 5-level full factorial Box-Behnken design was successfully implemented for MAE optimization, in which the processing time (t), temperature (T), ethanol concentration (Et) and solid/liquid ratio (S/L) were relevant independent variables. The proposed model was validated based on the high values of the adjusted coefficient of determination and on the non-significant differences between experimental and predicted values. The global optimum processing conditions (t=20 min; T=180 ºC; Et=0 %; and S/L=45 g/L) provided tomato extracts with high potential as nutraceuticals or as active ingredients in the design of functional foods. Additionally, the round tomato variety was highlighted as a source of added-value phenolic acids and flavonoids.

Obtenção de extratos de agaricus bisporus com ergosterol para incorporação em iogurtes e procedimentos de microencapsulação

Além de ser o cogumelo mais consumido no mundo, Agaricus bisporus é um dos cogumelos mais ricos em ergosterol, representando esta molécula quase 90% da sua fração de esteróis. Vários estudos têm atribuído ao ergosterol diferentes bioatividades, incluindo efeitos hipocolesterolémicos semelhantes aos exibidos pelos fitoesteróis. Isto torna o ergosterol uma molécula interessante para ser estudada como composto nutracêutico. Assim, este trabalho teve como objetivo avaliar o potencial de utilização dos extratos de A. bisporus ricos em ergosterol na produção de bebidas lácteas funcionais. Para o efeito, foram realizados testes de incorporação do extrato e do ergosterol puro em iogurtes que se compararam com bebidas lácteas funcionais comerciais (aditivadas com fitoesteróis). As amostras de A. bisporus foram submetidas a uma extração assistida por ultrassons e os extratos obtidos (IEXT), bem como a molécula de ergosterol em diferentes concentrações (IERG1 e IERG2), foram incorporados em iogurtes, e comparadas com amostras controlo (amostras de iogurte sem aditivos) (ICN) e iogurtes comerciais contendo fitoesteróis (ICP). Todas as amostras foram analisadas imediatamente após a incorporação (T0), e após sete dias de armazenagem a 4°C (T1), em relação aos parâmetros nutricionais, atividade antioxidante e propriedades citotóxicas em linhas celulares tumorais humanas e numa cultura primária de células de fígado de porco (não tumoral) para avaliação da toxicidade. O teor de ergosterol incorporado na forma pura, ou presente nos extratos, foi monitorizado por HPLC-UV. Adicionalmente, foi realizado um estudo de microencapsulação utilizando a técnica de coacervação, tendo o quitosano e o isolado proteico de soro como materiais encapsulantes. Num ensaio preliminar determinou-se o pH conducente a um maior rendimento de encapsulação e, seguidamente, verificou-se a influência da razão proteína:quitosano (P/Q) e da temperatura utilizada, no rendimento de encapsulação (Y1), na eficiência de encapsulação (Y2) e na carga (teor de ergosterol nas microesferas) (Y3). Posteriormente, o estudo foi realizado baseando-se nas melhores condições para encapsular ergosterol, sendo também avaliadas as respostas Y1, Y2 e Y3. Além de ser o cogumelo mais consumido no mundo, Agaricus bisporus é um dos cogumelos mais ricos em ergosterol, representando esta molécula quase 90% da sua fração de esteróis. Vários estudos têm atribuído ao ergosterol diferentes bioatividades, incluindo efeitos hipocolesterolémicos semelhantes aos exibidos pelos fitoesteróis. Isto torna o ergosterol uma molécula interessante para ser estudada como composto nutracêutico. Assim, este trabalho teve como objetivo avaliar o potencial de utilização dos extratos de A. bisporus ricos em ergosterol na produção de bebidas lácteas funcionais. Para o efeito, foram realizados testes de incorporação do extrato e do ergosterol puro em iogurtes que se compararam com bebidas lácteas funcionais comerciais (aditivadas com fitoesteróis). As amostras de A. bisporus foram submetidas a uma extração assistida por ultrassons e os extratos obtidos (IEXT), bem como a molécula de ergosterol em diferentes concentrações (IERG1 e IERG2), foram incorporados em iogurtes, e comparadas com amostras controlo (amostras de iogurte sem aditivos) (ICN) e iogurtes comerciais contendo fitoesteróis (ICP). Todas as amostras foram analisadas imediatamente após a incorporação (T0), e após sete dias de armazenagem a 4°C (T1), em relação aos parâmetros nutricionais, atividade antioxidante e propriedades citotóxicas em linhas celulares tumorais humanas e numa cultura primária de células de fígado de porco (não tumoral) para avaliação da toxicidade. O teor de ergosterol incorporado na forma pura, ou presente nos extratos, foi monitorizado por HPLC-UV. Adicionalmente, foi realizado um estudo de microencapsulação utilizando a técnica de coacervação, tendo o quitosano e o isolado proteico de soro como materiais encapsulantes. Num ensaio preliminar determinou-se o pH conducente a um maior rendimento de encapsulação e, seguidamente, verificou-se a influência da razão proteína:quitosano (P/Q) e da temperatura utilizada, no rendimento de encapsulação (Y1), na eficiência de encapsulação (Y2) e na carga (teor de ergosterol nas microesferas) (Y3). Posteriormente, o estudo foi realizado baseando-se nas melhores condições para encapsular ergosterol, sendo também avaliadas as respostas Y1, Y2 e Y3. As bebidas funcionalizadas com o extrato (IEXT) e com ergosterol na mesma concentração existente no extrato (IERG1) revelaram uma atividade antioxidante similar às bebidas comerciais com fitoesteróis. No entanto, as bebidas com ergosterol na mesma concentração do extrato de A. bisporus e de fitoesteróis (IERG2) revelaram uma atividade antioxidante superior. Além disso, apenas IEXT, IERG1 e IERG2 apresentaram um aumento na atividade antioxidante de T0 para T1, com destaque para a atividade exibida por IERG2, significando que o ergosterol e os extratos foram capazes de proteger a bebida láctea da oxidação, aumentando a vida de prateleira do produto. IERG2 foi a amostra que revelou a maior citotoxicidade para as linhas celulares tumorais, enquanto as bebidas com fitoesteróis mostraram a menor atividade, sem diferenças significativas entre T0 e T1. Os estudos de microencapsulação revelaram ainda que a técnica de coacervação permite obter cápsulas de distintos tamanhos e que as condições ótimas do processo ocorrem a pH 5,5, com temperatura de 55ºC e razão P/Q de 0,5, com um menor rendimento de encapsulação, mas com uma maior carga em ergosterol. Este trabalho contribuiu para o estudo do potencial da utilização de extratos de A. bisporus com ergosterol no desenvolvimento de novas bebidas funcionais. Constituiu um primeiro passo que necessita de estudos subsequentes relacionados com a avaliação da viabilidade da sua utilização ao nível industrial e demonstração clara da sua bioatividade in vivo.

Optimization of microwave-assisted extration of phenolic compounds from tomao by full factorial design coupled with response surface methodology

Tomato (Lycopersicon esculentum Mill.), apart from being a functional food rich in carotenoids, vitamins and minerals, is also an important source of phenolic compounds [1 ,2]. As antioxidants, these functional molecules play an important role in the prevention of human pathologies and have many applications in nutraceutical, pharmaceutical and cosmeceutical industries. Therefore, the recovery of added-value phenolic compounds from natural sources, such as tomato surplus or industrial by-products, is highly desirable. Herein, the microwave-assisted extraction of the main phenolic acids and flavonoids from tomato was optimized. A S-Ieve! full factorial Box-Behnken design was implemented and response surface methodology used for analysis. The extraction time (0-20 min), temperature (60-180 "C), ethanol percentage (0-100%), solidlliquid ratio (5-45 g/L) and microwave power (0-400 W) were studied as independent variables. The phenolic profile of the studied tomato variety was initially characterized by HPLC-DAD-ESIIMS [2]. Then, the effect of the different extraction conditions, as defined by the used experimental design, on the target compounds was monitored by HPLC-DAD, using their UV spectra and retention time for identification and a series of calibrations based on external standards for quantification. The proposed model was successfully implemented and statistically validated. The microwave power had no effect on the extraction process. Comparing with the optimal extraction conditions for flavonoids, which demanded a short processing time (2 min), a low temperature (60 "C) and solidlliquid ratio (5 g/L), and pure ethanol, phenolic acids required a longer processing time ( 4.38 min), a higher temperature (145.6 •c) and solidlliquid ratio (45 g/L), and water as extraction solvent. Additionally, the studied tomato variety was highlighted as a source of added-value phenolic acids and flavonoids.

Flowers of Gomphrena globosa L. as an alternatve source of betacyanins: optimization of the extraction using response surface methodology

Betacyanins are betalain pigments that display a red-violet colour which have been reported to be three times stronger than the red-violet dye produced by anthocyanins [1]. The applications of betacyanins cover a wide range of matrices, mainly as additives or ingredients in the food industry, cosmetics, pharmaceuticals and livestock feed. Although, being less commonly used than anthocyanins and carotenoids, betacyanins are stable between pH 3 to 7 and suitable for colouring in low acid matrices. In addition, betacyanins have been reported to display interesting medicinal character as powerful antioxidant and chemopreventive compounds either in vitro or in vivo models [2]. Betacyanins are obtained mainly from the red beet of Beta vulgaris plant (between I 0 to 20 mg per I 00 g pulp) but alternative primary sources are needed [3]. In addition, independently of the source used, the effect of the variables that affect the extraction of betacyanins have not been properly described and quantified. Therefore, the aim of this study was to identifY and optimize the conditions that maximize betacyanins extraction using the tepals of Gomphrena globosa L. flowers as an alternative source. Assisted by the statistical technique of response surface methodology, an experimental design was developed for testing the significant explanatory variables of the extraction (time, temperature, solid-liquid ratio and ethanolwater ratio). The identification was performed using high-performance liquid chromatography coupled with a photodiode array detector and mass spectrometry with electron spray ionization (HPLC-PDAMS/ ESI) and the response was measured by the quantification of these compounds using HPLC-PDA. Afterwards, a response surface analysis was performed to evaluate the results. The major betacyanin compounds identified were gomphrenin 11 and Ill and isogomphrenin IJ and Ill. The highest total betacyanins content was obtained by using the following conditions: 45 min of extraction. time, 35•c, 35 g/L of solid-liquid ratio and 25% of ethanol. These values would not be found without optimizing the conditions of the betacyanins extraction, which moreover showed contrary trends to what it has been described in the scientific bibliography. More specifically, concerning the time and temperature variables, an increase of both values (from the common ones used in the bibliography) showed a considerable improvement on the betacyanins extraction yield without displaying any type of degradation patterns.