17 resultados para Calorimetria diferencial de varredura
em Repositório da Produção Científica e Intelectual da Unicamp
Resumo:
The high cost of sensitivity commercial calorimeters may represent an obstacle for many calorimetric research groups. This work describes the construction and calibration of a batch differential heat conduction calorimeter with sample cells volumes of about 400 μL. The calorimeter was built using two small high sensibility square Peltier thermoelectric sensors and the total cost was estimated to be about US$ 500. The calorimeter was used to study the excess enthalpy of solution of binary mixtures of liquids, as a function of composition, for the following binary systems of solvents: water + 1,4-dioxane or + dimethylsulfoxide at 298,2 ± 0,5 K.
Resumo:
Base cutting and feeding into harvesters of plants lying close to the ground surface require an efficient sweeping action of the cutting mechanism. It is not the case of conventional sugarcane harvesters which have rigid blades mounted on discs capable to contaminate the cane with dirt as well as damage the ratoons. The objective of this work was to simulate the sweeping performance of a segmented base cutter. The model was developed using the laws of dynamic. Simulation included two rotational speeds (400 and 600 rpm), two cutting heights (0.12 and 0.13 m) and two disk tilting angles (-10º and -12º). The simulated sweeping angle varied between 56º and 193º, which are very promising as a mean to cutting and feeding cane sticks lying on the ground. Cutting height was the variable that affected sweeping action the most. This behavior indicates the need to have an automatic control of the cutting disk height in order to keep good sweeping performance as the harvester moves forward.
Resumo:
This work presents the development of low cost microprocessor-based equipment for generation of differential GPS correction signal, in real time, and configuration and supervision of the GPS base. The developed equipment contains a dedicated microcontroller connected to the GPS receiver, alphanumeric display and multifunction keyboard for configuration and operation of the system and communication interfaces. The electronic circuit has the function of receiving the information from GPS base; interpret them, converting the sentence in the RTCM SC-104 protocol. The microcontroller software makes the conversion of the signal received by the GPS base from the specific format to RTCM SC-104 protocol. The processing main board has two serials RS-232C standard interfaces. One of them is used for configuration and receiving the information generated by the GPS base. The other operates as output, sending the differential correction signal for the transmission system. The development of microprocessor-based equipment showed that it is possible the construction of a low cost private station for real time generation of differential GPS correction signal.
Resumo:
PURPOSE: To evaluate changes in retinal nerve fiber layer thickness as measured by scanning laser polarimetry (SLP) after the use of medication to reduce intraocular pressure (IOP) in glaucomatous or ocular hypertensive patients. METHODS: The authors prospectively enrolled 37 eyes of 37 patients in whom IOP was reduced by more than 25% after the use of medication. The images were obtained before and 15 to 30 days after the introduction of medication. The SLP parameters measured before and after the use of medication were compared using paired Student's t Test. RESULTS: The mean IOP was significantly reduced from 26.57±4.23 mmHg to 16.54 ±2.92 mmHg after the use of medication (p<0.05). None of the 10 SLP analyzed parameters was significantly affected by the reduction of IOP with medication (p>0.05). CONCLUSION: The retinal nerve fiber layer thickness, as measured by SLP, is not affected by the reduction of IOP with medication in patients with glaucoma or ocular hypertension.
Resumo:
Universidade Estadual de Campinas . Faculdade de Educação Física
Resumo:
Acute disseminated encephalomyelitis (ADEM) is a widespread monophasic inflamatory disease affecting the central nervous system, that usually follows an infection or vaccination. In this study, we present an analysis of magnetic resonance imaging (MRI), cerebrospinal fluid (CSF) and clinical aspects in four patients with clinical diagnosis of ADEM. The presence of MRI demyelinating lesions was crucial, but not in itself sufficient for definitive diagnosis. Clinical and MRI follow up, in order to exclude new lesions and to reevaluate the former ones, as well as CSF, were important for the differential diagnosis with other demyelinating diseases, particularly multiple sclerosis. In addition, we have shown that early treatment with methylprednisolone after the initial symptoms was effective for improving clinical manifestations as well as for reducing MRI lesions.
Resumo:
Machado-Joseph disease (MJD) is the most common autosomal dominant spinocerebellar ataxia and presents great phenotypic variability. MJD presenting with spastic paraparesis was recently described in Japanese patients. We report the case of 41-year-old woman with the phenotype of complicated hereditary spastic paraplegia. Her father died at the age of 56 years due to an undiagnosed progressive neurological disease that presented parkinsonism. She had an expanded allele with 66 CAG repeats and a normal allele with 22 repeats in the gene of MJD. MJD should be considered in the differential diagnosis of autosomal dominant complicated HSP. A patient with the phenotype of complicated HSP and relatives with other clinical features of a neurodegenerative disease should raise the suspicion of MJD.
Resumo:
The Orchidaceae is one of the largest flowering plants family and with a great importance to conservation. However, no survey on orchid flowers can be found in Mato Grosso do Sul. Thus, the objective of this work was to make a survey of the Orchidaceae species and of its ecology features in a riparian forest in a fragment of Floresta Estacional Semi-Decidual that belongs to the riparian forest of the Dourados River. The inventory was made by using a sweeping method for collection, and in addition to this the vertical and horizontal position of epiphytes were assessed on the hosts. For characterization of microclimate, it was used a thermohygrometer and luximeter. It was identified 17 species of 13 genera. Of the listed genera, the most abundant ones were: Acianthera, Macradenia and Capanemia. It was also noted a vertical and horizontal distribution of the Orchidaceae in relation to inverse gradient of water and light availability. Some species tended to be sensitive to height level categorization, whereas others seemed to occur with similar frequency along the host. In relation to the cardinal orientation, the apparent preferential response for south and east directions was associated to the low sampling effort and lower water availability, which could occur because the north face is opposed to the water body.
Resumo:
The durability of the cellulose-cement composites is a decisive factor to introduce such material in the market. Polymers have been used in concrete and mortar production to increase its durability. The goal of this work was the physical and mechanical characterization of cellulose-cement composites modified by a polymer and the subsequent durability evaluation. The work also evaluated the dispersion of acrylic polymer in composites made of Pinus caribaea residues. The physical properties observed were water absorption by immersion and bulk density. Rupture modulus and toughness were determined by flexural test. The specimens were obtained from pads, produced by pressing and wet curing. Samples were subjected to accelerated aging tests by repeated wetting and drying cycles and hot-water bath and natural aging. The scanning electron microscopy (SEM) allowed verifying the fiber and composite characteristics along the time. For the composite range analyzed, it was observed the polymer improved the mechanical properties of composites besides a significant decreasing in water absorption. The use of polymer improved the performance of vegetable fiber-cement composites when compared to the conventional mortar, due to water absorption decreasing.
Resumo:
Dahlstedtia Malme (Leguminosae) is a neotropical genus, native to the Brazilian Atlantic Forest, and comprises two species, D. pinnata (Benth.) Malme and D. pentaphylla (Taub.) Burk., although it has been considered a monotypic genus by some authors. Leaf anatomy was compared to verify the presence of anatomical characters to help delimit species. Foliar primordium, leaflet, petiolule, petiole and pulvinus were collected from cultivated plants (Campinas, SP, Brazil) and from natural populations (Picinguaba, Ubatuba and Caraguatatuba, SP, Brazil - D. pinnata; Antonina, PR, Brazil - D. pentaphylla). Studies on leaflet surface assessment (Scanning Electron Microscopy), as well as histology and venation analyses were carried out of dehydrated, fresh and fixed material from two species. Leaflet material was macerated for stomatal counts. Histological sections, obtained by free-hand cut or microtome, were stained with Toluidine Blue, Safranin/Alcian Blue, Ferric Chloride, Acid Phloroglucin. Secretory cavities are present in the lamina, petiolule, petiole, pulvinus and leaf primordium in D. pentaphylla, but not in D. pinnata, and can be considered an important character for species diagnosis. Other leaf characters were uninformative in delimiting Dahlstedtia species. There is cambial activity in the petiolule, petiole and pulvinus. This study, associated with other available data, supports the recognition of two species in Dahlstedtia.
Resumo:
Cuphea carthagenensis (Jacq.) J.F. Macbr. is an herb, which occurs preferably in wet places. Amongst other species of the genus, C. carthagenensis is distinguished for its great chemical potential and frequent use in popular medicine. In this study the morphological and anatomical structures were identified, as well as the histochemical characterization was done. Samples of root, stem and leaves were collected from adult plants. This material was processed for anatomical and histochemical analysis in light microscopy and for morphological analysis, in scanning electron microscopy. Important morphological and anatomical considerations were added for C. carthagenensis, such as: the occurrence of aerenchymatous phellem with suberized layers; the types of trichomes present in the vegetative organs, the characterization of secretory trichomes, as well as the secreted substances. The groups of secondary metabolites presents in the root, stem and leaf of C. carthagenensis with more intense histochemical reaction were: proanthocyanidins, phenolic compounds, acids polysaccharides (mucilage especially) and lipids.
Resumo:
The article presents two translation models that were typical in the XVII and XVIII centuries, but can also be seen as paradigmatics in the field of Translation Studies: 1) The rhetorical model that defends the possibility of translation and emphasizes the necessity of adapting the original to the taste of the target public. 2) The model that affirms the impossibility of translation, the non-translatability: a) because the sensual elements that are linked to the language of the original are praised; b) because there is a defense of the cultural relativism and of the non-translatability between cultures; c) or because there is a defense not only of the impossibility to separate signifiers and meaning, but also because there is a definition of the signifier and of all identities as being the result of a differential game.
Resumo:
It was done microencapsulation of natural essencial orange oil through spray-drying. The purpose was to use the best proportion of wall materials among maltodextrin, acacia gum, and modified starch (capsul) in order to retain greater amount of orange oil. The orange oil (10%) and maltodextrin (36%) remained constant. Three spray drying temperatures were employed: 180°C, 200°C and 220°C, therefore, nine final products were obtained. The superficial and inner oil concentrations were measured. The microcapsules were also examined through optical and scanning electron microscopy. The three temperatures employed did not affect the microencapsulation. The microstructure of the capsules were almost similar regardless the proportion employed among the carbohydrates to wall composition. At light microscopy it was observed a great heterogeneity of capsules diameters, and probably not smooth surfaces; at scanning electron microscopy it was clear that the walls displayed porosity over round surfaces. The best retention was given by the formula containing 10% of capsul, 10% of orange oil and 36% of maltodextrin, when total oil retention was 94%, regardless the drying temperature here employed.
Resumo:
The effects of aluminum (Al) on the activities of antioxidant enzymes and ferritin expression were studied in cell suspension cultures of two varieties of Coffea arabica, Mundo Novo and Icatu, in medium with pH at 5.8. The cells were incubated with 300 µM Al3+, and the Al speciation as Al3+ was 1.45% of the mole fraction. The activities of superoxide dismutase (SOD), catalase (CAT), and glutathione S-transferase (GST) were increased in Mundo Novo, whereas glutathione reductase (GR) and guaiacol peroxidase (GPOX) activities remained unchanged. SOD, GR, and GST activities were increased in Icatu, while CAT activity was not changed, and GPOX activity decreased. The expression of two ferritin genes (CaFer1 and CaFer2) were analyzed by Real-Time PCR. Al caused a downregulation of CaFER1 expression and no changes of CaFER2 expression in both varieties. The Western blot showed no alteration in ferritin protein levels in Mundo Novo and a decrease in Icatu. The differential enzymes responses indicate that the response to Al is variety-dependent.
Resumo:
Universidade Estadual de Campinas . Faculdade de Educação Física