Ultrastructural, Antigenic and Physicochemical Characterization of the Mojuí dos Campos (Bunyavirus) Isolated from Bat in the Brazilian Amazon Region

The Mojuí dos Campos virus (MDCV) was isolated from the blood of an unidentified bat (Chiroptera) captured in Mojuí dos Campos, Santarém, State of Pará, Brazil, in 1975 and considerated to be antigenically different from other 102 arboviruses belonging to several antigenic groups isolated in the Amazon region or another region by complement fixation tests. The objective of this work was to develop a morphologic, an antigenic and physicochemical characterization of this virus. MDCV produces cytopathic effect in Vero cells, 24 h post-infection (p.i), and the degree of cellular destruction increases after a few hours. Negative staining electron microscopy of the supernatant of Vero cell cultures showed the presence of coated viral particles with a diameter of around 98 nm. Ultrathin sections of Vero cells, and brain and liver of newborn mice infected with MDCV showed an assembly of the viral particles into the Golgi vesicles. The synthesis kinetics of the proteins for MDCV were similar to that observed for other bunyaviruses, and viral proteins could be detected as early as 6 h p.i. Our results reinforce the original studies which had classified MDCV in the family Bunyaviridae, genus Bunyavirus as an ungrouped virus, and it may represent the prototype of a new serogroup.

Development and physicochemical characterization of dexamethasone-loaded polymeric nanocapsule suspensions

The influence of drug concentration, oil phase, and surfactants on the characteristics of dexamethasone-loaded nanocapsules was investigated. The best formulations were obtained at dexamethasone concentrations of 0.25 and 0.50 mg.mL-1 (encapsulation efficiency: 80-90%; mean size: 189-253 nm). The type of oil phase influenced only the stability of dexamethasone-loaded nanocapsules. The association of polysorbate 80 and sorbitan monooleate provided a more stable formulation. Sunflower oil and sorbitan sesquioleate used for the first time as oil phase and surfactant for nanocapsules, respectively, have allowed obtaining suspensions with low mean size and narrow size distribution.

Interaction of naproxen with calcium carbonate: physicochemical characterization and in vitro drug release studies

Interaction and physicochemical characterization of dispersions of naproxen in calcium carbonate after freeze-drying the wet-state equilibrated mixture have been investigated by analytical methods. The FT-IR study revealed the acid-base reaction between naproxen and calcium carbonate. The DSC study indicated physical interaction and significantly diminished crystallinity of naproxen in the formulation containing higher quantities of calcium carbonate. Furthermore, the SEM study showed the reduced particle size and loss of crystalline morphology in the same sample. Drug release increased with the increase of calcium carbonate in the formulations. Formulation of naproxen with calcium carbonate in 1:2 ratio allowed its dissolution to the greatest extent (94.96%) while other compositions, 1:0.5 and 1:1, showed 80.86% and 78.30% release, respectively.

Physicochemical characterization and antioxidant capacity of pitanga fruits (Eugenia uniflora L.)

This study was carried out to obtain more information about the physicochemical properties, composition, and antioxidant activity of pitanga fruits (Eugenia uniflora L.), particularly fruits from the State of Rio Grande do Sul, Brazil. Pitanga with different flesh colors (purple, red, and orange) from tree selections cultivated at Embrapa Clima Temperado (RS-Brazil) were analyzed. Only slight differences were observed in the quality parameters and in the proximate and fatty acid compositions among the fruits studied. The extracts from purple-fleshed pitanga had the highest total phenolic and anthocyanin contents along with the highest antioxidant capacity. The antioxidant capacity (DPPH and FRAP assays) of methanolic pitanga extracts was highly correlated with the total phenolic content, but in ethanolic extracts, the anthocyanin content was correlated only with the FRAP antioxidant capacity. Orange fleshed pitanga had higher β-cryptoxanthin and β-carotene levels than those of the red fruit, which had higher lycopene content. The results indicate that the purple-fleshed pitanga, cultivated in Rio Grande do Sul, is a rich source of phenolic compounds and has high antioxidant capacity. The red and orange-fleshed pitanga, on the other hand, are rich sources of carotenoids.

Microbiological and physicochemical characterization of surimi obtained from waste of piramutaba fillet

The aim of this work was to perform the microbiological and physicochemical characterization of surimi made from waste of piramutaba filleting. The results of physicochemical characterization of the waste and surimi were: moisture (76.37 and 79.11%), total lipids (5.35 and 0.74%), proteins (14.92 and 10.79%), ash (3.03 and 2.35%), pH (6.9 and 7.4), caloric value (109.15 and 77.86 kcal.g-1), and water activity (both 0.98), respectively. The results of the levels of total volatile bases were 7.29 mgN/100-1 g (waste) and 7.01% carbohydrate (surimi). The values of total lipids and proteins were reduced during the preparation of surimi, probably due to successive washes during the processing. Waste and surimi were examined microbiologically and are in compliance with required parameters. The results show a loss of red (a* parameter) and yellow (b* parameter) color. On the other hand, the L* parameter (lightness) increased after the processing of surimi. It can be concluded that piramutaba waste can be used for surimi preparation and as a source of nutrients for human consumption, providing an alternative use of these wastes avoiding their disposal polluting the environment.

Characterization of the antibiotic doripenem using physicochemical methods: chromatography, spectrophotometry, spectroscopy and thermal analysis

Doripenem was characterized through physicochemical and spectroscopic techniques, as well as thermal analysis. TLC (Rf = 0.62) and HPLC (rt = 7.4 min) were found to be adequate to identify the drug. UV and infrared spectra showed similar profile between doripenem bulk and standard. The ¹H and 13C NMR analysis revealed chemical shifts that allowed identifying the drug. Thermal analysis demonstrated three steps with mass loss, at 128, 178 and 276 ºC. The work was successfully applied to qualitative analysis of doripenem, showing the reported methods can be used for physicochemical characterization of doripenem

Macrocospic and physiochemical characterization of a sugarless and gluten-free cake enriched with fibers made from pumpkin seed (Cucurbita maxima, L.) flour and cornstarch

The Consumers' interest for products with caloric reduction has increased, and their development is a technological challenge. The consumption of cakes has grown in importance and the demand for dietary products has stimulated the use of sweeteners and the optimization of bakery products. The consumption of fibers is related to chronic diseases prevention. Pumpkin seeds (maximum Cucurbita, L.), rich in fibers, can be used as a source of fiber in food products. A gluten-free diet is not easy to follow since gluten free products are not always available. The objective of this work was to perform a physicochemical characterization of cakes prepared with flours blends (FB) based on Pumpkin Seed Flour (PSF). The cakes were elaborated with FB in the ratios of 30:70 (C30) and 40:60 (C40) of PSF and cornstarch (CS), respectively. The results showed gluten absence and near-neutral pH. The chemical analysis of C30 and B40 showed increase of ashes, lipids, proteins, and insoluble dietary fiber and a decrease in the content of carbohydrates and calories. The chemical composition of C40 presented the greatest content of lipids, proteins, and dietary fibers, the lowest content of calories, and the best physical parameters. Therefore, both products proved suitable for human consumption.

Characterization of fruits from the savanna: Araça (Psidium guinnensis Sw.) and Marolo (Annona crassiflora Mart.)

The objective of this work was to characterize fruits from the Brazilian savanna by means of physical and chemical analyses. The results obtained for araça peel, araça pulp and marolo pulp, respectively, were: moisture (77.03, 80.41 and 70.56 g.100 g-1), ash (0.65, 0.44 and 0.54 g.100 g-1), protein (1.39, 1.87 and 1.99 g.100 g-1), lipids (0.32, 0.33 and 2.36 g.100 g-1), total carbohydrates (90.88 , 78.25 and 24.55 g.100 g-1), total soluble sugars (8.45, 9.99 and 127.4 g.100 g-1), pH (3.76, 3.99 and 4.49), soluble solids (11° Brix, 8.8 °Brix and 21.4 °Brix) and antioxidant potential (16.33, 12.75 and 34.29 discoloration DPPH/100 mL). Calcium was the predominant mineral in araça (490 mg.kg-1 peel and 485 mg.kg-1 pulp) while magnesium was in marolo (350 mg.kg-1). Citric acid was the predominant organic acid in araça (3125 μg.g-1 peel and 881.25 μg.g-1 pulp) and Malic acid was predominant in marolo (76.68 μg.g-1). Therefore, given their nutrient contents, the consumption of these fruits from the savanna should be encouraged.

Characterization of blueberry fruits (Vaccinium spp.) and derived products

The objectives of this study were to physicochemically characterize and determine the antioxidant activities and anthocyanin contents of organic Rabbiteye blueberries grown in Southern Brazil and its derived products, in order to investigate the utility of food processing wastes as raw materials for developing products with beneficial health properties. The antioxidant capacity of the blueberries was superior to that of other fruits and juices. The pomace exhibited high activity, albeit lower than that of the fruit, while the flour and the dried blueberries lost 66% and 46% of the original antioxidant activity, respectively. The average anthocyanin contents of the fruits were moderate compared to other sources and species of blueberries. The pomace contains a large amount of anthocyanins while the flour and dried blueberries exhibited a 32% and 42% loss in anthocyanin content, respectively. The use of agro-industrial residues, in addition to adding value and minimizing the impact caused by the accumulation in the environment, can be directed toward the development of new products with bioactive properties.

Preparação e caracterização físico-química de complexos de inclusão entre anestésicos locais e hidroxipropil-beta-ciclodextrina

S(-) Bupivacaine (S(-)BVC) and Lidocaine (LDC) are widely used local anesthetics (LA). Hydroxypropyl beta-cyclodextrin (HP-beta-CD) is used as a drug-carrier system. The aim of this work was to characterize inclusion complexes between LA and HP-beta-CD. The affinity constants determined at different pHs show favourable complexation. The release kinetics experiments showed that S(-)BVC and LDC changed the released profiles in the presence of HP-beta-CD. Nuclear magnetic resonance experiments gave information about the interaction between LA and the cyclodextrin cavity. This study focused on the physicochemical characterization of drug-delivery formulations that come out as potentially new therapeutic options for pain treatment.

Caracterização do complexo de inclusão ropivacaína: beta-ciclodextrina

Characteriza of the inclusion complex ropivacaine: beta-cyclodextrin. Ropivacaine (RVC) is a widely used local anesthetic. The complexation of RVC with beta-cyclodextrin (beta-CD) is of great interest for the development of more efficient local anesthetic formulations. The present work focuses on the characterization of the RVC:beta-CD complex by nuclear magnetic resonance (NMR). The stoichiometry of the complex is 1:2 RVC:beta-CD. DOSY-NMR shows that the association constant is 55.5 M-1. Longitudinal relaxation time results show that RVC changes its mobility in the presence of beta-CD. This study is focused on the physicochemical characterization of inclusion complexes that are potentials options for pain treatment.

Efeitos da poluição atmosférica (litorânea e industrial) em isoladores da rede elétrica da região metropolitana de Salvador

The performances of eight kinds of insulators from electrical distribution lines in Salvador-BA, Brazil, were evaluated considering the chemical and physical local environmental pollution. The parameters that were chosen as characteristic for the insulators' properties were leakage current and partial electrical discharge. A data storage processing system and a communication link to the lab were built for data acquisition. The results show that the main contribution to the poor performance of the insulators is settleable magnetite particulate matter on the insulator in addition to the long term wetness time, t4.

OBTENÇÃO E CARACTERIZAÇÃO DE MATERIAL HÍBRIDO ENTRE SÍLICA E CICLODEXTRINAS

The obtention of silica and cyclodextrin hybrid materials was accomplished by refluxing them in xylol using citric acid as a binding agent. The materials were characterized by infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, scanning electron microscopy, and elemental analysis. Evidence for the docking of cyclodextrins α and γ was substantiated based on the variation in band intensity for groups such as ≡Si-OH. Additional docking evidence includes the displacement of some of the bands that are related to cyclodextrin such as the deformation of the C-H axial bond. The α and γ-CDSi materials were characterized as amorphous compounds. The products obtained in the synthesis showed changes in the decomposition temperatures of their isolated constituents, in which the mass of α and γ-CD docked to the silica surface gave the estimated values of 41% and 47%, respectively. The elemental constituents were shown to be consistent and close to their relative theoretical values. ​Thermogravimetric analysis showed that a reduction in the percentage of the hybrids was proportional to the amount of lost mass. This new material is an improvement over synthesized organosilane materials because the operator and the environment benefit from a less toxic methodology. In addition, the material has several potential applications in complexation systems with cyclodextrin.

Physicochemical and microbiological characterization of cassava flower honey samples produced by africanized honeybees

Cassava producers in the region of Marília-São Paulo are integrating their farming activity with beekeeping to diversify their income. The aim of this study was to evaluate the physicochemical and microbiological quality of honey samples produced by Africanized honeybees Apis mellifera from cassava flower in 2008. Analysis were carried out for pH, total soluble solids (TSS), acidity, moisture, reducing and total sugars, apparent sucrose, hydroxymethylfurfural, color, ash, proteins, water insoluble solids, diastasic activity, mineral content, microbiological evaluations, and mineral and hydrocyanic acid (HCN) content. The honey samples showed physicochemical and microbiological characteristics favorable to commercialization, with the exception of apparent sucrose and acidity, which show the need for a narrow focus of attention to the honey maturation degree at the harvest time and more careful monitoring during production and processing. The commercialization of Brazilian cassava honey, still little explored, can be widely spread in the market since the levels of hydrocyanic acid (HCN) showed no consumption risk; in addition the simultaneous production of honey and cassava provides an alternative to family income increase.

Characterization, physicochemical stability, and evaluation of in vitro digestibility of solid lipid microparticles produced with palm kernel oil and tristearin

Solid lipid particles have been investigated by food researchers due to their ability to enhance the incorporation and bioavailability of lipophilic bioactives in aqueous formulations. The objectives of this study were to evaluate the physicochemical stability and digestibility of lipid microparticles produced with tristearin and palm kernel oil. The motivation for conducting this study was the fact that mixing lipids can prevent the expulsion of the bioactive from the lipid core and enhance the digestibility of lipid structures. The lipid microparticles containing different palm kernel oil contents were stable after 60 days of storage according to the particle size and zeta potential data. Their calorimetric behavior indicated that they were composed of a very heterogeneous lipid matrix. Lipid microparticles were stable under various conditions of ionic strength, sugar concentration, temperature, and pH. Digestibility assays indicated no differences in the release of free fatty acids, which was approximately 30% in all analises. The in vitro digestibility tests showed that the amount of palm kernel in the particles did not affect the percentage of lipolysis, probably due to the high amount of surfactants used and/or the solid state of the microparticles.