Isomerization-cracking of n-octane on catalysts based on heteropolyacid H3Pw12O40 and heteropolyacid supported on zirconia and promoted with Pt and Cs

Isomerization - cracking of n-octane was studied using H3PW12O40 (HPA) and HPA supported on zirconia and promoted with Pt and Cs. The addition of Pt and Cs to the supported HPA did not modify the Keggin structure. The Pt addition to the supported HPA did not substantially modify the total acidity; however, the Brönsted acidity increased significantly. Cs increased the total acidity and Brönsted acidity. A linear relation was observed between the n-C8 total conversion and Brönsted acidity. The most adequate catalysts for performing isomerization and cracking to yield high research octane number (RON) are those with higher values of Brönsted acidity.

Fracture modes and acoustic emission characteristics of hydrogen-assisted cracking in high-strength low-alloy steel weldment

The aim of the present paper is to study the relationship between the fracture modes in hydrogen-assisted cracking (HAC) in microalloied steel and the emission of acoustic signals during the fracturing process. For this reason, a flux-cored arc weld (FCAW) was used in a high-strength low-alloy steel. The consumable used were the commercially available AWS E120T5-K4 and had a diameter of 1.6 mm. Two different shielding gases were used (CO2 and CO2+5% H2) to obtain complete phenomenon characterization. The implant test was applied with three levels of restriction stresses. An acoustic emission measurement system (AEMS) was coupled to the implant test apparatus. The output signal from the acoustic emission sensor was passed through an electronic amplifier and processed by a root mean square (RMS) voltage converter. Fracture surfaces were examined by scanning electron microscopy (SEM) and image analysis. Fracture modes were related with the intensity, the energy and the number of the peaks of the acoustic emission signal. The shielding gas CO2+5% H2 proved to be very useful in the experiments. Basically, three different fracture modes were identified in terms of fracture appearance: microvoid coalescence (MVC), intergranular (IG) and quasi-cleavage (QC). The results show that each mode of fracture presents a characteristic acoustic signal.

Necrotrophic fungi associated with epidermal microcracking caused by chilling injury in pickling cucumber fruit

The objective of this work was to visualize the association between microcracking and other epidermal chilling injury symptoms, and to identify rots in cucumber fruit (Cucumis sativus L.) by scanning electron microscopy (SEM). Depressed epidermal areas and surface cracking due to damages of subepidermal cells characterized the onset of pitting in cucumber fruit. The germination of conidia of Alternaria alternata, with some of them evident on the fractures in the cultivar Trópico, occurred after damaging on the epidermis. Before, the chilling injury symptoms became visible, Stemphylium herbarum conidia germinated, and mycelium penetrated through the hypodermis using the microcracks as pathway. In the cultivar Perichán 121 the fungus was identified as Botrytis cinerea.

Efeito do microclima na qualidade da uva de mesa 'Romana' (A 1105) cultivada sob cobertura plástica

A videira é uma das principais fruteiras cultivadas em todo o mundo, e atualmente a preferência por uvas do tipo "sem sementes" ou "apirênicas" vem aumentando gradativamente no mercado interno brasileiro. A cultivar 'Romana' (A 1105) tem mostrado grande potencial como nova alternativa de uva de mesa apirênica na região de Jundiaí (SP). No entanto, a qualidade dos cachos tem sido afetada pela ocorrência de chuvas na época da colheita, propiciando a incidência de rachaduras nas bagas ("cracking") e podridões. Levando-se em consideração a viabilidade do cultivo desta uva sob cobertura plástica, foi realizada a presente pesquisa, objetivando-se analisar os parâmetros microclimáticos dentro e fora dos ambientes protegidos e a qualidade do produto na época de colheita. Os valores médios de transmissividade à radiação solar global entre os tratamentos foram decrescentes na seguinte ordem: efeito apenas da cobertura plástica > efeito apenas do sistema de condução da planta > efeito da cobertura plástica + sistema de condução da planta. Logo após a colheita, foram observadas reduções significativas na incidência de podridões, dano profundo e dano superficial nos cachos da videira cultivada sob cobertura plástica. A massa do cacho também foi significativamente maior no tratamento com cobertura plástica. Assim, pode-se concluir que o uso da cobertura plástica para o cultivo da uva 'Romana' (A 1105) foi capaz de melhorar a qualidade dos frutos, principalmente por reduzir significativamente a incidência de podridões nos cachos, importante problema que afetava esta cultivar.

Caracterização e propriedades catalíticas da zeolita HZSM5 modificada com nióbio

HZSM5 zeolite was modified by exchanging proton by niobium (V). Several samples were obtained with various degrees of exchange. Pore volumes and acidity were measured to characterize these exchanged zeolites. Catalytic properties were evaluated with two reaction tests: m-xylene transformation and n-heptane cracking. The introduction of niobium on HZSM5 zeolite decreases the diffusion coefficient of 2-methyl-pentane and increases the zeolite acidity. The sample containing niobium are initially more active in cracking of n-heptane and m-xylene isomerization than HZSM5 alone.

Troca iônica no estado sólido de európio3+ em zeólita Y: influência do tempo de reação

Rare earth elements supported in zeolites are the most important catalysts in the fluid cracking of petroleum. The solid state ion exchange of Eu3+ in Y zeolite was investigated. First of all, the hydrated EuCl3 was well mixed in a ball mill and was then heated at 300ºC for different times. The quantitative determination of Eu3+ showed that the degree of ion exchange depends on the reaction time at constant temperature, being ~95% in 4 h. The X-ray study showed that the crystallinity of the zeolite is little affected by the exchange procedure. The study of spectroscopic properties of Eu3+, emission spectra and lifetime, give information about the migration and position of the ion in the zeolite cages.

Craqueamento térmico de alcanos: uma aula prática de química orgânica para a graduação

In this work we describe an experiment for the thermal cracking of octane and heptane and the qualitative analyses of the products using the Baeyer test for unsaturated compounds and gas chromatographic analyses. The experiment is very simple and requires one period of two hours and is suitable for undergraduate organic chemistry experimental courses.

Pilarização de uma argila brasileira com poliidroxications de alumínio: preparação, caracterização e propriedades catalíticas

Montmorillonite clay from Brazil was pillared with aluminium polyhydroxications. The influence of aging of the pillaring solution and the concentration of the clay suspension on the properties of the prepared materials was studied. The materials were characterized by chemical analysis, XRD and pore analysis by N2 adsorption. The catalytic properties were evaluated in the cumene cracking reaction. Results showed that the pillarization process increases the basal spaces of natural clay from 9.7 to 18.5 Å and the surface area from 41 to 300 m²/g.

Biocombustíveis a partir de óleos e gorduras: desafios tecnológicos para viabilizá-los

Periodically, during petroleum shortage, fatty acids and their derivatives have been used as alternative fuels to those derived from petroleum. Different approaches have been proposed, including the use of neat fats and oils or their derivatives. Indeed, the utilization of biodiesel produced by alcoholysis of triacilglycerides or esterification of fatty acids, or hydrocarbons obtained from cracking of fatty materials were studied and used in several countries. Increasing concerns about energy security and climate changes have lead several countries, including Brazil, to start up biofuels programs. Different technologies are currently being developed in order to produce biofuels with economical feasibility. In this work are discussed alternative fatty raw-materials and processing technologies that are currently being studied in order to produce fuels suitable to sustainable substitute diesel fuel.

Craqueamento termo-catalítico da mistura óleo de fritura usado-lodo de estamparia têxtil para a produção de óleo com baixo índice de acidez

In this work, cracking experiments were performed to carry out the thermal conversion of the mixture of used frying oil and textile stamping sludge in continuous reactor. The textile stamping sludge was used to catalyze the reaction of thermal cracking. The physical and chemical properties of the oil produced were analyzed. Among the results of this analysis the level of acidity in the range of 12 mg KOH/g stands out. Low levels of acidity as this particular mean better quality oil. In this regard it is important that further researches on processes of conversion of residual oil occur.

Podridão basal pós-colheita do coco verde no estado do Ceará

A new post-harvest disease of coconut (Cocos nucifera) was recently detected in fruits exported to European countries. The main symptoms are the blacking and cracking of basal parts of the fruits. Water oozing may occurs as the infection progresses. The fungus Lasiodiplodia theobromae has been frequently isolated from the lesions. Inoculation tests proved that this pathogen is the causal agent of the coconut fruit basal rot. This is the first occurrence of this post-harvest disease in Brazil.

Armazenamento refrigerado da uva de mesa 'Romana' (A1105) cultivada sob cobertura plástica

A videira é uma das principais fruteiras cultivadas em todo o mundo e atualmente a preferência por uvas do tipo "sem sementes" ou "apirênicas" vem aumentando gradativamente no mercado interno brasileiro. A cultivar 'Romana' (A1105) tem mostrado grande potencial como nova alternativa de uva de mesa apirênica na região de Jundiaí - SP. No entanto, a qualidade dos cachos tem sido afetada pela ocorrência de chuvas na época da colheita, propiciando a incidência de rachaduras nas bagas ("cracking") e podridões. Visando a solucionar essa dificuldade, foram conduzidos experimentos de campo em vinhedo cultivado em cortina dupla e sob cobertura plástica. Após a colheita, foram coletadas oito amostras com seis cachos cada, que foram armazenadas a 3 ºC e submetidas a avaliações de qualidade por um período máximo de 36 dias. A perda de massa ultrapassou o valor de 6% após três semanas de armazenamento refrigerado, quando apresentou sinais de murchamento das bagas, concluindo-se que o período máximo de armazenamento em câmara fria para a cultivar 'Romana' (A1105) foi de 21 dias.

Fluid dynamic modelling and simulation of circulating fluidized bed reactors: importance of the interface turbulence transfer

The main objective of this work is to analyze the importance of the gas-solid interface transfer of the kinetic energy of the turbulent motion on the accuracy of prediction of the fluid dynamic of Circulating Fluidized Bed (CFB) reactors. CFB reactors are used in a variety of industrial applications related to combustion, incineration and catalytic cracking. In this work a two-dimensional fluid dynamic model for gas-particle flow has been used to compute the porosity, the pressure, and the velocity fields of both phases in 2-D axisymmetrical cylindrical co-ordinates. The fluid dynamic model is based on the two fluid model approach in which both phases are considered to be continuous and fully interpenetrating. CFB processes are essentially turbulent. The model of effective stress on each phase is that of a Newtonian fluid, where the effective gas viscosity was calculated from the standard k-epsilon turbulence model and the transport coefficients of the particulate phase were calculated from the kinetic theory of granular flow (KTGF). This work shows that the turbulence transfer between the phases is very important for a better representation of the fluid dynamics of CFB reactors, especially for systems with internal recirculation and high gradients of particle concentration. Two systems with different characteristics were analyzed. The results were compared with experimental data available in the literature. The results were obtained by using a computer code developed by the authors. The finite volume method with collocated grid, the hybrid interpolation scheme, the false time step strategy and SIMPLEC (Semi-Implicit Method for Pressure Linked Equations - Consistent) algorithm were used to obtain the numerical solution.