Comparative evaluation of underlying causes of death processed by the Automated Classification of Medical Entities and the Underlying Cause of Death Selection Systems

INTRODUCTION: The correct identification of the underlying cause of death and its precise assignment to a code from the International Classification of Diseases are important issues to achieve accurate and universally comparable mortality statistics These factors, among other ones, led to the development of computer software programs in order to automatically identify the underlying cause of death. OBJECTIVE: This work was conceived to compare the underlying causes of death processed respectively by the Automated Classification of Medical Entities (ACME) and the "Sistema de Seleção de Causa Básica de Morte" (SCB) programs. MATERIAL AND METHOD: The comparative evaluation of the underlying causes of death processed respectively by ACME and SCB systems was performed using the input data file for the ACME system that included deaths which occurred in the State of S. Paulo from June to December 1993, totalling 129,104 records of the corresponding death certificates. The differences between underlying causes selected by ACME and SCB systems verified in the month of June, when considered as SCB errors, were used to correct and improve SCB processing logic and its decision tables. RESULTS: The processing of the underlying causes of death by the ACME and SCB systems resulted in 3,278 differences, that were analysed and ascribed to lack of answer to dialogue boxes during processing, to deaths due to human immunodeficiency virus [HIV] disease for which there was no specific provision in any of the systems, to coding and/or keying errors and to actual problems. The detailed analysis of these latter disclosed that the majority of the underlying causes of death processed by the SCB system were correct and that different interpretations were given to the mortality coding rules by each system, that some particular problems could not be explained with the available documentation and that a smaller proportion of problems were identified as SCB errors. CONCLUSION: These results, disclosing a very low and insignificant number of actual problems, guarantees the use of the version of the SCB system for the Ninth Revision of the International Classification of Diseases and assures the continuity of the work which is being undertaken for the Tenth Revision version.

Land cover classification of Lago Grande de Curuai floodplain (Amazon, Brazil) using multi-sensor and image fusion techniques

Given the limitations of different types of remote sensing images, automated land-cover classifications of the Amazon várzea may yield poor accuracy indexes. One way to improve accuracy is through the combination of images from different sensors, by either image fusion or multi-sensor classifications. Therefore, the objective of this study was to determine which classification method is more efficient in improving land cover classification accuracies for the Amazon várzea and similar wetland environments - (a) synthetically fused optical and SAR images or (b) multi-sensor classification of paired SAR and optical images. Land cover classifications based on images from a single sensor (Landsat TM or Radarsat-2) are compared with multi-sensor and image fusion classifications. Object-based image analyses (OBIA) and the J.48 data-mining algorithm were used for automated classification, and classification accuracies were assessed using the kappa index of agreement and the recently proposed allocation and quantity disagreement measures. Overall, optical-based classifications had better accuracy than SAR-based classifications. Once both datasets were combined using the multi-sensor approach, there was a 2% decrease in allocation disagreement, as the method was able to overcome part of the limitations present in both images. Accuracy decreased when image fusion methods were used, however. We therefore concluded that the multi-sensor classification method is more appropriate for classifying land cover in the Amazon várzea.

Validation study of an automated wrist monitor, omron model HEM-608, compared with the standard methods for blood pressure measurement

OBJECTIVE - The aim of our study was to assess the profile of a wrist monitor, the Omron Model HEM-608, compared with the indirect method for blood pressure measurement. METHODS - Our study population consisted of 100 subjects, 29 being normotensive and 71 being hypertensive. Participants had their blood pressure checked 8 times with alternate techniques, 4 by the indirect method and 4 with the Omron wrist monitor. The validation criteria used to test this device were based on the internationally recognized protocols. RESULTS - Our data showed that the Omron HEM-608 reached a classification B for systolic and A for diastolic blood pressure, according to the one protocol. The mean differences between blood pressure values obtained with each of the methods were -2.3 +7.9mmHg for systolic and 0.97+5.5mmHg for diastolic blood pressure. Therefore, we considered this type of device approved according to the criteria selected. CONCLUSION - Our study leads us to conclude that this wrist monitor is not only easy to use, but also produces results very similar to those obtained by the standard indirect method.

Assessment of the DIXTAL DX-2710 Automated Oscillometric Device for Blood Pressure Measurement with the Validation Protocols of the British Hypertension Society (BHS) and the Association for the Advancement of Medical Instrumentation (AAMI)

OBJECTIVE: To assess the Dixtal DX2710 automated oscillometric device used for blood pressure measurement according to the protocols of the BHS and the AAMI. METHODS: Three blood pressure measurements were taken in 94 patients (53 females 15 to 80 years). The measurements were taken randomly by 2 observers trained to measure blood pressure with a mercury column device connected with an automated device. The device was classified according to the protocols of the BHS and AAMI. RESULT: The mean of blood pressure levels obtained by the observers was 148±38/93±25 mmHg and that obtained with the device was 148±37/89±26 mmHg. Considering the differences between the measurements obtained by the observer and those obtained with the automated device according to the criteria of the BHS, the following classification was adopted: "A" for systolic pressure (69% of the differences < 5; 90% < 10; and 97% < 15 mmHg); and "B" for diastolic pressure (63% of the differences < 5; 83% < 10; and 93% < 15 mmHg). The mean and standard deviation of the differences were 0±6.27 mmHg for systolic pressure and 3.82±6.21 mmHg for diastolic pressure. CONCLUSION: The Dixtal DX2710 device was approved according to the international recommendations.

Using different satellite imagery and classification techniques to assess the contribution of trees outside forests in the municipality of Maringá, Brazil

Forest cover of the Maringá municipality, located in northern Parana State, was mapped in this study. Mapping was carried out by using high-resolution HRC sensor imagery and medium resolution CCD sensor imagery from the CBERS satellite. Images were georeferenced and forest vegetation patches (TOFs - trees outside forests) were classified using two methods of digital classification: reflectance-based or the digital number of each pixel, and object-oriented. The areas of each polygon were calculated, which allowed each polygon to be segregated into size classes. Thematic maps were built from the resulting polygon size classes and summary statistics generated from each size class for each area. It was found that most forest fragments in Maringá were smaller than 500 m². There was also a difference of 58.44% in the amount of vegetation between the high-resolution imagery and medium resolution imagery due to the distinct spatial resolution of the sensors. It was concluded that high-resolution geotechnology is essential to provide reliable information on urban greens and forest cover under highly human-perturbed landscapes.

Comparison of methods for classification of the coefficient of variation in papaya

ABSTRACT The objective of this work was to study the distribution of values of the coefficient of variation (CV) in the experiments of papaya crop (Carica papaya L.) by proposing ranges to guide researchers in their evaluation for different characters in the field. The data used in this study were obtained by bibliographical review in Brazilian journals, dissertations and thesis. This study considered the following characters: diameter of the stalk, insertion height of the first fruit, plant height, number of fruits per plant, fruit biomass, fruit length, equatorial diameter of the fruit, pulp thickness, fruit firmness, soluble solids and internal cavity diameter, from which, value ranges were obtained for the CV values for each character, based on the methodology proposed by Garcia, Costa and by the standard classification of Pimentel-Gomes. The results obtained in this study indicated that ranges of CV values were different among various characters, presenting a large variation, which justifies the necessity of using specific evaluation range for each character. In addition, the use of classification ranges obtained from methodology of Costa is recommended.

Access to information: assessment of the use of automated interaction technologies in call centers

With the purpose of at lowering costs and reendering the demanded information available to users with no access to the internet, service companies have adopted automated interaction technologies in their call centers, which may or may not meet the expectations of users. Based on different areas of knowledge (man-machine interaction, consumer behavior and use of IT) 13 propositions are raised and a research is carried out in three parts: focus group, field study with users and interviews with experts. Eleven automated service characteristics which support the explanation for user satisfaction are listed, a preferences model is proposed and evidence in favor or against each of the 13 propositions is brought in. With balance scorecard concepts, a managerial assessment model is proposed for the use of automated call center technology. In future works, the propositions may become verifiable hypotheses through conclusive empirical research.

Diabetes como causa básica ou associada de morte no Estado de São Paulo, Brazil, 1992

INTRODUÇÃO: As estatísticas de mortalidade, em geral, baseiam-se na análise das causas básicas de óbito. No caso do diabetes, sua importância é sempre subestimada, pois os diabéticos geralmente morrem devido às complicações crônicas da doença, sendo estas que figuram como a causa básica do óbito. Para atenuar esse problema, deveriam ser analisadas todas as causas mencionadas no atestado de óbito. Como contribuição ao problema foi analisada a freqüência das menções do diabetes nas declarações de óbito e as principais causas associadas. METODOLOGIA: Os coeficientes específicos e a mortalidade proporcional por diabetes, como causa básica ou associada, foram calculados com base nas informações extraídas dos atestados de óbito, através do sistema ACME (Automated Classification of Medical Entities), para o Estado de São Paulo, em1992. RESULTADOS E CONCLUSÕES: De um total de 202.141 óbitos, o diabetes foi mencionado em 13.786 (6,8%), sendo a causa básica em 5.305 (2,6%). A proporção foi maior para mulheres do que para homens (10,1 vs 4,6% como causa mencionada e 6,1 vs 2,9% como causa básica). Entre os óbitos com menção de diabetes no atestado, as principais causas básicas foram: diabetes (38,5%), doenças cardiovasculares (37,2%), doenças respiratórias (8,5%) e neoplasias (4,8%). Quando o diabetes foi a causa básica, as principais causas associadas foram: doenças cardiovasculares (42,2%), respiratórias (10,7%) e geniturinárias (10,1%) . Nos casos onde o diabetes figura como causa associada, as principais causas básicas foram as doenças cardiovasculares (60,5%), respiratórias (13,8%) e neoplásicas (7,9%). Apesar das limitações dos dados obtidos dos atestados de óbito, observou-se que o diabetes representa uma importante causa de morte, traduzindo um problema de saúde de grande magnitude. Também, a análise pelas causas múltiplas de morte fornece um perfil da morbidade associada ao diabetes por ocasião do óbito, salientando a importância das doenças cardiovasculares.

Equivalência entre revisões da Classificação Internacional de Doenças: causas de morte

OBJETIVO: Avaliar a comparabilidade entre a causa básica e as causas múltiplas de morte codificadas segundo as regras e disposições correlatas da nona e da décima revisões da Classificação Internacional de Doenças. MÉTODOS: Os dados provieram de uma amostra sistemática de 3.313 declarações de óbito de falecidos residentes no Estado de São Paulo, no ano de 1992 (1,6% do total dos óbitos naquele ano). Os dados foram processados pelo sistema "Automated Classification of Medical Entities", incluindo códigos para todas as afecções mencionadas nos atestados médicos e a causa básica que havia sido avaliada e revista segundo as disposições da nona revisão. Todas as afecções foram recodificadas segundo as disposições da décima revisão e os códigos resultantes introduzidos no banco de dados original para seleção da causa básica pelo sistema de declarações de óbito de São Paulo. As tabulações das causas múltiplas de morte codificadas pela nona e pela décima revisões foram obtidas pelas versões respectivas do programa "Tabulador de Causas Múltiplas". A comparação das causas de morte foi realizada a partir dos capítulos de ambas as revisões da Classificação Internacional de Doenças. RESULTADOS/CONCLUSÕES: As mudanças mais importantes para as causas básicas, ocorridas nos capítulos I, III e VIII da nona revisão e nos correspondentes capítulos I, IV e X da décima revisão, devem-se ao deslocamento das mortes causadas pela doença devido ao vírus da imunodeficiência humana e pela preterição das pneumonias como causa de morte. Em relação às causas múltiplas de morte, verificou-se o aumento de menções de doenças respiratórias e a correspondente diminuição de menções incluídas no capítulo das afecções mal definidas, devido à recodificação da insuficiência respiratória.

Mortalidade feminina em idade reprodutiva no Estado de São Paulo, Brasil, 1991-1995: causas básicas de óbito e mortalidade materna

OBJETIVO: Descrever a mortalidade materna no período reprodutivo (15 a 49 anos) no Estado de São Paulo, de 1991 a 1995, segundo grupos etários e causas básicas de óbito. MÉTODOS: Foi fornecida pela Fundação Seade a listagem dos óbitos, com as causas básicas codificadas pela Classificação Internacional de Doenças, 9ª Revisão, utilizando-se o programa "Automated Classification of Medical Entities", as estimativas da população feminina segundo grupos etários e os números de nascidos vivos. Foram calculados coeficientes específicos por 100.000 mulheres, mortalidade materna por 100.000 nascidos vivos e percentagens de óbitos por subgrupos. Foram calculadas medianas dos coeficientes do quinquênio, para comparação das principais causas agrupadas nos capítulos. RESULTADOS: De 1991 a 1995 houve aumento da mortalidade por deficiência da imunidade celular a partir de 25 anos, parecendo traduzir um paralelismo com a curva ascendente da epidemia de AIDS em mulheres. Lesões e envenenamentos predominam nas mais jovens, porém a partir de 35 anos as doenças do aparelho circulatório e neoplasmas passaram a ser preponderantes. Doenças infecciosas e parasitárias ocupam a sétima ou oitava posição, em todas as idades. Acidentes e homicídios e suicídios foram elevados. A mortalidade materna variou de 43,7 a 49,6 por 100.000 nascidos vivos. CONCLUSÕES: Houve grande exposição das mulheres em idade fértil a fatores associados a causas externas, doenças crônicas e AIDS. A maioria das causas apontadas de mortalidade materna podem ser prevenidas e, portanto, revelam insuficiência de assistência pré-natal adequada e extensiva, bem como deficiências no atendimento ao parto e puerpério.

Comparison between the HemoCue® and an automated counter for measuring hemoglobin

To determine the precision and agreement of the hemoglobin (Hb) measurements in capillary and venous blood samples by the HemoCue® and an automated counter. Hb was determined by both equipaments in blood samples of 29 pregnant women. The HemoCue® showed low repeatability of Hb measurements in duplicate in capillary (CR=0.53 g/dL, CV=13.6%) and venous blood (CR=0.53 g/dL, CV=13.6%). Hb measurements in capillary blood were higher than those in venous blood (12.4 and 11.7 g/dL, respectively; p<0.05). There was high agreement between Hb in capillary blood by the HemoCue® and in venous blood by the counter (r icc=0.86; p<0.01), and also between the diagnosis of anemia by both equipments (k=0.81; p<0.01). The HemoCue® seems to be more appropriate for capillary blood and require training of the measurers.

Comorbidity adjustment index for the international classification of diseases, 10

OBJECTIVE: To develop a Charlson-like comorbidity index based on clinical conditions and weights of the original Charlson comorbidity index. METHODS: Clinical conditions and weights were adapted from the International Classification of Diseases, 10th revision and applied to a single hospital admission diagnosis. The study included 3,733 patients over 18 years of age who were admitted to a public general hospital in the city of Rio de Janeiro, southeast Brazil, between Jan 2001 and Jan 2003. The index distribution was analyzed by gender, type of admission, blood transfusion, intensive care unit admission, age and length of hospital stay. Two logistic regression models were developed to predict in-hospital mortality including: a) the aforementioned variables and the risk-adjustment index (full model); and b) the risk-adjustment index and patient's age (reduced model). RESULTS: Of all patients analyzed, 22.3% had risk scores >1, and their mortality rate was 4.5% (66.0% of them had scores >1). Except for gender and type of admission, all variables were retained in the logistic regression. The models including the developed risk index had an area under the receiver operating characteristic curve of 0.86 (full model), and 0.76 (reduced model). Each unit increase in the risk score was associated with nearly 50% increase in the odds of in-hospital death. CONCLUSIONS: The risk index developed was able to effectively discriminate the odds of in-hospital death which can be useful when limited information is available from hospital databases.

COMPARISON BETWEEN AUTOMATED SYSTEM AND PCR-BASED METHOD FOR IDENTIFICATION AND ANTIMICROBIAL SUSCEPTIBILITY PROFILE OF CLINICAL Enterococcus spp

Enterococci are increasingly responsible for nosocomial infections worldwide. This study was undertaken to compare the identification and susceptibility profile using an automated MicrosScan system, PCR-based assay and disk diffusion assay of Enterococcus spp. We evaluated 30 clinical isolates of Enterococcus spp. Isolates were identified by MicrosScan system and PCR-based assay. The detection of antibiotic resistance genes (vancomycin, gentamicin, tetracycline and erythromycin) was also determined by PCR. Antimicrobial susceptibilities to vancomycin (30 µg), gentamicin (120 µg), tetracycline (30 µg) and erythromycin (15 µg) were tested by the automated system and disk diffusion method, and were interpreted according to the criteria recommended in CLSI guidelines. Concerning Enterococcus identification the general agreement between data obtained by the PCR method and by the automatic system was 90.0% (27/30). For all isolates of E. faecium and E. faecalis we observed 100% agreement. Resistance frequencies were higher in E. faecium than E. faecalis. The resistance rates obtained were higher for erythromycin (86.7%), vancomycin (80.0%), tetracycline (43.35) and gentamicin (33.3%). The correlation between disk diffusion and automation revealed an agreement for the majority of the antibiotics with category agreement rates of > 80%. The PCR-based assay, the van(A) gene was detected in 100% of vancomycin resistant enterococci. This assay is simple to conduct and reliable in the identification of clinically relevant enterococci. The data obtained reinforced the need for an improvement of the automated system to identify some enterococci.

Classification of varieties of pasteurella pestis strains isolated in the interior of the state of Pernambuco-Brazil

Studies were made on the biochemical behavior of 100 strains of P.pestis isolated in Northeastern Brazil with regard to production of nitrous acid, reduction of nitrates to nitrltes, and aciáification of glycerol. Results showed that 98 strains can be classified as "orientalis variety", while the remaining two could not be included in any of the existing "varieties".