6 resultados para Stator faults
em Scielo Saúde Pública - SP
Resumo:
OBJECTIVE: To assess the impact of town planning, infrastructure, sanitation and rainfall on the bacteriological quality of domestic water supplies. METHODS: Water samples obtained from deep and shallow wells, boreholes and public taps were cultured to determine the most probable number of Escherichia coli and total coliform using the multiple tube technique. Presence of enteric pathogens was detected using selective and differential media. Samples were collected during both periods of heavy and low rainfall and from municipalities that are unique with respect to infrastructure planning, town planning and sanitation. RESULTS: Contamination of treated and pipe distributed water was related with distance of the collection point from a utility station. Faults in pipelines increased the rate of contamination (p<0.5) and this occurred mostly in densely populated areas with dilapidated infrastructure. Wastewater from drains was the main source of contamination of pipe-borne water. Shallow wells were more contaminated than deep wells and boreholes and contamination was higher during period of heavy rainfall (p<0.05). E. coli and enteric pathogens were isolated from contaminated supplies. CONCLUSIONS: Poor town planning, dilapidated infrastructure and indiscriminate siting of wells and boreholes contributed to the low bacteriological quality of domestic water supplies. Rainfall accentuated the impact.
Resumo:
OBJECTIVE To evaluate the actions of patient safety management developed in hospitals, from the perspective of nurses. METHOD This is a cross-sectional, descriptive study of the survey type. Participants were seven hospitals, in which seven nurse managers and 49 sector coordinator nurses (n = 56) answered the instrument prepared by the author. RESULTS The results showed that 100% of hospitals have an adverse event reporting system, 71.4% have a Risk Management Committee and 80% have discussions about the events. There is agreement that these discussions lead to favorable changes for patient safety in the surveyed institutions. The employees' fear of punishment for their faults, and the underreporting of events were the aspects of greatest weakness found. CONCLUSION The institutions should develop organizational policies focused on stimulating event notification and on the implementation of measures directed to a non-punitive organizational culture.
Resumo:
Three guilds of bruchid beetles oviposit on seeds at different times and in different ways, i. e., in these guilds some species only oviposit on fruits while on the plant (Guild A), other species only oviposit on seeds exposed in fruits while still on the plant (Guild B) and some only oviposit on seeds once they are exposed on the substrate (Guild C). It has been established that one plant species may be oviposited upon by all three guilds, some only by two guilds and some by only one guild. Before and after the inception of this concept many papers have been published that seem to establish that early oviposition behavior of bruchids was probably onto fruits where they burrowed through the fruit wall and fed on seeds (Guild A). Then, as evolution of the fruits developed for dispersal of seeds and possible escape from bruchid predation, bruchids developed to feed in seeds in various other ways (Guilds B and C). Our data show that about 78% of extant bruchids oviposit on fruits, and the other 22% with behavior of Guilds B and C. A review of these papers and new data on oviposition guilds and bruchid evolution are presented and discussed here.
Resumo:
Entomofauna associated to fruits and seeds of two species of Enterolobium Mart. (Leguminosae): Harm or benefit? The aims of the present study were to identify the entomofauna associated to the fruits and seeds of Enterolobium contortisiliquum (Vell.) Morong and Enterolobium timbouva Mart. (Leguminosae), as well as to determine relationships among insects and the possible harm and/or benefit stemming from these associations. Fruit infestation was evaluated and the insects were identified. Seed consumption (%) and the germination of predated seeds (%) were determined. The fruits of E. contortisiliquum exhibited a high percentage of infestation (91%). The most representative species in the fruits were Lophopoeum timbouvae Lameere, 1884, Merobruchus bicoloripes (Pic, 1930) and Stator limbatus (Horn, 1873). In the fruits of E. timbouva, only one species was found (S. limbatus). E. contortisiliquum seed consumption was proportionately higher (55.2%) to that of E. timbouva (15%). The germination of predated seeds from E. contortisiliquum was null, whereas 40% of predated seeds from E. timbouva germinated.
Resumo:
Scanning tunnelling microscopy (STM) was used to characterise the basal surface of fresh cleaved crystals of 2H-WS2. Although no impurity or stacking faults could be detected by X-ray diffraction, STM images obtained with negative bias voltage showed two kinds of defects. These defects were attributed to an iodine derivative used as transport agent. In a flat surface free of defects, an image with atomic resolution was achieved with sulphur distances and angles as expected for hexagonal symmetry of 2H-WS2.
Resumo:
The influence of natural aging furthered by atmospheric corrosion of parts of electric transformers and materials, as well as of concrete poles and cross arms containing corrosion inhibitors was evaluated in Manaus. Results for painted materials, it could showed that loss of specular gloss was more intensive in aliphatic polyurethane points than in acrylic polyurethane ones. No corrosion was observed for metal and concrete samples until 400 days of natural aging. Corrosion in steel reinforcement was noticed in some poles, arising from manufacturing faults, such as low cement content, water/cement ratio, thin concrete cover thickness, etc. The performance of corrosion inhibitors was assessed by many techniques after natural and accelerated aging in a 3.5% saline aqueous solution. The results show the need for better chemical component selection and its concentration in the concrete mixture.