Disparities in cervical and breast cancer mortality in Brazil

OBJECTIVE To analyze cervical and breast cancer mortality in Brazil according to socioeconomic and welfare indicators. METHODS Data on breast and cervical cancer mortality covering a 30-year period (1980-2010) were analyzed. The data were obtained from the National Mortality Database, population data from the Brazilian Institute of Geography and Statistics database, and socioeconomic and welfare information from the Institute of Applied Economic Research. Moving averages were calculated, disaggregated by capital city and municipality. The annual percent change in mortality rates was estimated by segmented linear regression using the joinpoint method. Pearson’s correlation coefficients were conducted between average mortality rate at the end of the three-year period and selected indicators in the state capital and each Brazilian state. RESULTS There was a decline in cervical cancer mortality rates throughout the period studied, except in municipalities outside of the capitals in the North and Northeast. There was a decrease in breast cancer mortality in the capitals from the end of the 1990s onwards. Favorable socioeconomic indicators were inversely correlated with cervical cancer mortality. A strong direct correlation was found with favorable indicators and an inverse correlation with fertility rate and breast cancer mortality in inner cities. CONCLUSIONS There is an ongoing dynamic process of increased risk of cervical and breast cancer and attenuation of mortality because of increased, albeit unequal, access to and provision of screening, diagnosis and treatment. 

Salmonella enterica subsp houtenae serogroup O:16 in a HIV positive patient: case report

We described a case of salmonellosis in a 33-year old HIV-infected patient. The patient presented oral and esophageal candidiasis, intense epigastric and retrosternal pain. During the physical examination he was hypochloraemic, acyanotic, hypohydrated, anicteric and afebrile. Admittance laboratorial tests indicated: red cells 3.6 millions/mm³; hemoglobin, 10.1 g/dL; leukocyte count, 3,000/mm³, with 1% of eosinophils, 14% of non-segmented and 53% of segmented neutrophils and 31% of lymphocytes. The blood culture was positive for Salmonella enterica subsp houtenae serogroup O:16. This is probably the first human report of bacteremia due to Salmonella enterica subsp houtenae in Brazil associated to HIV-infected patient.

Clinical conditions associated withintestinal strongyloidiasis in Rio de Janeiro, Brazil

INTRODUCTION: Strongyloides stercoralis is a soil-transmitted helminth that produces an infection that can persist for decades. The relationships between certain clinical conditions and strongyloidiasis remains controversial. This study aims to identify the clinical conditions associated with intestinal strongyloidiasis at a reference center for infectious diseases in Rio de Janeiro, Brazil. METHODS: The clinical conditions that were assessed included HIV/AIDS, HTLV infection, cardiovascular diseases, diabetes, obstructive respiratory diseases, viral hepatitis, tuberculosis, cancer, chronic renal disease, nutritional/metabolic disorders, psychiatric conditions, rheumatic diseases and dermatologic diseases. We compared 167 S. stercoralis-positive and 133 S. stercoralis-negative patients. RESULTS: After controlling for sex (male/female OR = 2.29; 95% (CI): (1.42 - 3.70), rheumatic diseases remained significantly associated with intestinal strongyloidiasis (OR: 4.96; 95% CI: 1.34-18.37) in a multiple logistic regression model. With respect to leukocyte counts, patients with strongyloidiasis presented with significantly higher relative eosinophil (10.32% ± 7.2 vs. 4.23% ± 2.92) and monocyte (8.49% ± 7.25 vs. 5.39% ± 4.31) counts and lower segmented neutrophil (52.85% ± 15.31 vs. 61.32% ± 11.4) and lymphocyte counts (28.11% ± 9.72 vs. 30.90% ± 9.51) than S. stercoralis-negative patients. CONCLUSIONS: Strongyloidiasis should be routinely investigated in hospitalized patients with complex conditions facilitate the treatment of patients who will undergo immunosuppressive therapy. Diagnoses should be determined through the use of appropriate parasitological methods, such as the Baermann-Moraes technique.

Enalapril alters the formation of the collagen matrix in spontaneously hypertensive rats

OBJECTIVE: To assess the effect of the inhibition of the angiotensin-converting enzyme on the collagen matrix (CM) of the heart of newborn spontaneously hypertensive rats (SHR) during embryonic development. METHODS: The study comprised the 2 following groups of SHR (n=5 each): treated group - rats conceived from SHR females treated with enalapril maleate (15 mg. kg-1.day-1) during gestation; and nontreated group - offspring of nontreated females. The newborns were euthanized within the first 24 hours after birth and their hearts were removed and processed for histological study. Three fields per animal were considered for computer-assisted digital analysis and determination of the volume densities (Vv) of the nuclei and CM. The images were segmented with the aid of Image Pro Plus® 4.5.029 software (Media Cybernetics). RESULTS: No difference was observed between the treated and nontreated groups in regard to body mass, cardiac mass, and the relation between cardiac and body mass. A significant reduction in the Vv[matrix] and a concomitant increase in the Vv[nuclei] were observed in the treated group as compared with those in the nontreated group. CONCLUSION: The treatment with enalapril of hypertensive rats during pregnancy alters the collagen content and structure of the myocardium of newborns.

Establishment of a new genus for Parastenocaris itica (Copepoda, Harpacticoida) from El Salvador, Central America, with discussion of the Parastenocaris fontinalis and P. proserpina groups

A new genus of Parastenocarididae is described from the Neotropical region. Iticocaris gen. nov. is established to include Parastenocaris itica Noodt, 1962. Iticocaris gen. nov. is defined by the following characters: 1) male leg 3 with 2-segmented exopod; 2) first exopodal segment short and rectangular; 3) thumb hypertrophic, longer than the second exopodal segment and inserted on the distal edge of exopod segment 1, occupying the whole distal margin; 4) exopod 2 or apophysis strongly sclerotized, articulated with the exopod segment 1 on its inner margin and curved against the thumb, forming a strong forceps; 5) leg 4 endopod without dimorphism in shape and size vs. minor dimorphism in ornamentation; 6) leg 5 with three setae and 7) lack of the anterolateral furcal seta II. The new genus is monotypic, represented by Iticocaris itica (Noodt, 1962) comb. nov., from El Salvador, Central America. A close relationship is hypothesized between I. itica and the genus Brasilibathynellocaris Jakobi, 1972, the males of which both share the forceps-like elongated apophysis.

The presence of Chane Nieto and Guajirolus Flowers (Ephemeroptera, Baetidae) in Brazil with the description of a new species

The related genera Chane and Guajirolus are reported for the first time from Brazil. Guajirolus rondoni, sp. n. is described based on nymphs from Rondônia State and can be differentiated from the other species of the genus by the following combination of characteristics: 1) mandibles with minute spicules on outer margin; 2) maxillary palp three-segmented; 3) hypopharynx lingua with three rounded processes; 4) projection of second segment of labial palp with apex narrower than base; 5) abdominal color pattern; and 6) paraprocts with 13 to 15 organized spines. An updated key to the species of both genera is presented.

Pineus boerneri Annand, 1928 (Hemiptera, Adelgidae) - a new species to Brazil: morphology of eggs, nymphs and adults

Pineus boerneri Annand, 1928 (Hemiptera, Adelgidae) _ a new species to Brazil: morphology of eggs, nymphs and adults. Pineus boerneri represents the first Adelgidae species recorded in Brazil. This aphid species forms extensive colonies on branches and trunk of Pinus spp., with apterous oviparous females, eggs and nymphs covered with white wax. The aim of this research is to study the morphology of eggs, nymphs, and adults to provide useful data for species identification in order to solve taxonomic issues. The study was based on morphometric data and optical and scanning electron microscopy images. First instar nymphs are active and can be easily distinguished from the others by their elongate minute yellowish body; well developed legs bearing a pair of sensorial setae at the apex of the second tarsomere; and antenna with three segments with a large rhinarium and distinct apical setae on the last segment. From the second to the fourth instar, nymphs are sessile, with round red body; they loose the third antennal segment and its sensorial structures, as well as the setae on the second tarsomere. The oviparous female is reddish-brown, with round body with about 0.76 mm diameter; legs reduced; antennae one-segmented; ovipositor distinct; numerous wax glands are present, mainly on the head. Accurate characterization of the species and distinction of the nymphal instars of P. boerneri were made possible by canonical analysis of morphometric data and morphological characters.

SOIL PHOSPHORUS THRESHOLDS IN EVALUATING RISK OF ENVIRONMENTAL TRANSFER TO SURFACE WATERS IN SANTA CATARINA, BRAZIL

The State of Santa Catarina, Brazil, has agricultural and livestock activities, such as pig farming, that are responsible for adding large amounts of phosphorus (P) to soils. However, a method is required to evaluate the environmental risk of these high soil P levels. One possible method for evaluating the environmental risk of P fertilization, whether organic or mineral, is to establish threshold levels of soil available P, measured by Mehlich-1 extractions, below which there is not a high risk of P transfer from the soil to surface waters. However, the Mehlich-1 extractant is sensitive to soil clay content, and that factor should be considered when establishing such P-thresholds. The objective of this study was to determine P-thresholds using the Mehlich-1 extractant for soils with different clay contents in the State of Santa Catarina, Brazil. Soil from the B-horizon of an Oxisol with 800 g kg-1 clay was mixed with different amounts of sand to prepare artificial soils with 200, 400, 600, and 800 g kg-1 clay. The artificial soils were incubated for 30 days with moisture content at 80 % of field capacity to stabilize their physicochemical properties, followed by additional incubation for 30 days after liming to raise the pH(H2O) to 6.0. Soil P sorption curves were produced, and the maximum sorption (Pmax) was determined using the Langmuir model for each soil texture evaluated. Based on the Pmax values, seven rates of P were added to four replicates of each soil, and incubated for 20 days more. Following incubation, available P contents (P-Mehlich-1) and P dissolved in the soil solution (P-water) were determined. A change-point value (the P-Mehlich-1 value above which P-water starts increasing sharply) was calculated through the use of segmented equations. The maximum level of P that a soil might safely adsorb (P-threshold) was defined as 80 % of the change-point value to maintain a margin for environmental safety. The P-threshold value, in mg dm-3, was dependent on the soil clay content according to the model P-threshold = 40 + Clay, where the soil clay content is expressed as a percentage. The model was tested in 82 diverse soil samples from the State of Santa Catarina and was able to distinguish samples with high and low environmental risk.

Bone histomorphometry of broilers submitted to different phosphorus sources in growing and finisher rations

The objective of this work was to identify alterations in the histomorphology of the cortical bone tissue of broilers submitted to growing and finisher rations formulated with five different sources of phosphorus: dicalcium phosphate, simple superphosphate, triple superphosphate, monoammonium phosphate and Araxá rock phosphate. Histological images had their components segmented, and were called regions of interest (ROI). Images were analyzed through developed algorithms, using the SCILAB mathematical environment. Eleven features were considered in order to obtain a complete description of the bone images: percentage of bone by area, ROI area, ROI perimeters, ROI elongation, ROI angle and their respective standard deviations, besides entropy of ROI angles and a texture-oriented measure (lacunarity). The substitution of dicalcium phosphate in growing and finisher rations for any other tested source of phosphorus caused significant changes on the hystomorphology of the cortical broilers bones, for example: diminution of bone percentage by area, increase of lacuna area and worse matrix homogeneity. Changes were more pronounced in the Araxá rock phosphate treatments, with the highest fluorine content, than in simple superphosphate, triple superphosphate and monoammonium phosphate treatments, which were similar.

Base temperature and simulation model for nodes appearance in cape gooseberry (Physalis peruviana L.)

Data was analyzed on development of the solanaceen fruit crop Cape gooseberry to evaluate how well a classical thermal time model could describe node appearance in different environments. The data used in the analysis were obtained from experiments conducted in Colombia in open fields and greenhouse condition at two locations with different climate. An empirical, non linear segmented model was used to estimate the base temperature and to parameterize the model for simulation of node appearance vs. time. The base temperature (Tb) used to calculate the thermal time (TT, ºCd) for node appearance was estimated to be 6.29 ºC. The slope of the first linear segment was 0.023 nodes per TT and 0.008 for the second linear segment. The time at which the slope of node apperance changed was 1039.5 ºCd after transplanting, determined from a statistical analysis of model for the first segment. When these coefficients were used to predict node appearance at all locations, the model successfully fit the observed data (RSME=2.1), especially for the first segment where node appearance was more homogeneous than the second segment. More nodes were produced by plants grown under greenhouse conditions and minimum and maximum rates of node appearance rates were also higher.

Titulador potenciométrico automatizado baseado em sistema de fluxo monossegmentado

A new automated system for acid-base flow titrations is proposed. In the operation mode, several sample to titrant volumetric ratios are injected in an air segmented plug. Five three way solenoid valves and three acrilic junctions, assembled in a hidrodynamic injection system, were accountable for the monosegmented reagents plug formation. A turbulent flow reactor was used for a perfect mix of reagents in the plug. The detector system employed a glass combined electrode fitted in an acrilic holder. Titrations of hydrochloric, nitric and acetic acids, in several concentrations, were performed with standard sodium hidroxide, for evaluation of the efficiency of the system. The relative standard deviation of the determinations was about ±0,5% and each titration was carried out in 3-4 minutes. A Quick BASIC 4.5® program was developed for the titrator control.

Sintesis de poliuretanos a partir de polioles obtenidos a partir del aceite de higuerilla modificado por transesterificación con pentaeritritol

Castor oil was reacted by transesterification with various percentages in mass of pentaerythritol to obtain different esters of pentaerythritol. Alternatively, glycerol was also used instead of pentaerythritol for the same reaction in order to establish comparative reference products. The products of the reactions were characterized by matrix-assisted laser desorption/ionization time-of-flight mass spectroscopy in order to detect and quantify (in terms of the molecular mass and structural information) the components of the products obtained. Analysis for hydroxyl value, acid value, viscosity and specific gravity were used to complete the characterization of the polyols obtained and also of the original castor oil. The polymer characterization was accomplished by tensile stress-strain tests, Shore A hardness, thermogravimetric analysis and chemical resistance to solvents.

Aplicações de enzimas na síntese e na modificação de polímeros

Enzymes are biological catalysts that offer great potential for use in the synthesis and modification of polymers, being more specific and greener than chemical catalysts. In this work, enzymes from the classes of hydrolases (lipase, cutinase and protease) and of oxidoreductases (horseradish peroxidase, manganese peroxidase and laccase) were identified as the main biocatalysts responsible for the synthesis of polymers. Biocatalysis can potentially be part of the life cycle of several polymers, including polyesters, polyurethanes, polycarbonates, polyamides, functionalized polysaccharides and polystyrene, allowing the synthesis of specialty macromolecules for fine applications and with higher added-value than commodity polymers.

Poliuretanos obtenidos a partir de aceite de higuerilla modificado y poli-isocianatos de lisina: síntesis, propiedades mecánicas y térmicas y degradación in vitro

Biodegradable polyurethanes (PUR) were prepared from polyols derived from castor oil by transesterification of pentaerythritol-modified castor oil and lysine polyisocyanates (LDI and LTI). The polyurethanes obtained were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis (TGA), and dynamic mechanical thermal analysis (DMTA). The mechanical behavior of the polyurethanes was measured by Shore A hardness and tensile testing (stress-strain curves). The biodegradable nature of the material was determined by contact angle, water absorption tests, and in vitro degradation in PBS solution. This study aims to examine the effect of the structure and functionality of diisocyanate on the mechanical properties and in vitro degradation of the material. The results were compared with homologous materials obtained from isophorone diisocyanate (IPDI) used in previous works. The objective was to evaluate candidate materials that can be potentially used in tissue engineering.