O experimento de Clement-Desormes no século XXI

The Clement-Desormes experiment is reviewed. By reason of a finite difference between the pressure within the system and its surroundings, Bertrand and McDonald have criticized the usual consideration of the adiabatic expansion as reversible. Garland, Nibler and Shoemaker oppose, defining regions through virtual boundaries where the surroundings do not operate. For Holden, the use of virtual boundaries is expendable. Experiments cannot support a hypothesis testing due to experiment's intrinsic uncertainty. The role of polytropy in uncertainty is discussed. Both thermodynamic definitions and kinetic model depict the real processes as irreversible phenomena and the reversible ones as a limiting hypothetical case.

THE EFFECTIVE DIFFUSIVITY OF CLOVE(Eugenia caryophyllus) ESSENTIAL OIL IN PRESSURIZED CO2

The effective diffusivity of clove essential oil in subcritical liquid CO2 was estimated. The experimental apparatus employed was a fixed-bed extractor. The fixed bed was formed with grounded (mesh -32 + 65) and compacted clove buds which were considered a solid element. The effective diffusion coefficient was evaluated by fitting the experimental concentration profile to the unsteady state mass balance equation for unidirectional diffusion in a finite solid medium. The diffusion coefficient was related to the concentration of oil in the solid by an exponential function. The estimated values of the effective diffusion coefficient varied from 3.64 to 5.22x10-10 m2/s. The average relative errors were lower than 3.1%.

Breastfeeding: making the difference in the development, health and nutrition of term and preterm newborns

Breastfeeding is the natural and safe way of feeding small infants, providing nutritional, immunological, psychological and economic recognized and unquestionable advantages. These qualities are especially important in premature infants, because of their vulnerability. Despite highly desirable, there is, in general, little success in breastfeeding preterm infants, especially in special care neonatal units. There are evidences that a high supportive hospital environment, with an interdisciplinary team, makes possible to these infants to be breastfed. In this article, the authors present an up-to-date review about the components of human milk and its unique characteristics, as well as describes aspects that make the breast milk particularly suitable for feeding the premature newborn.

Difference in the in-hospital mortality of unstable angina pectoris between men and women

PURPOSE: To assess differences in the in-hospital mortality (HM) rate between men and women with unstable angina pectoris (UA) according to age, depression of the ST segment, history of previous acute myocardial infarction (AMI), and risk factors for coronary heart disease. METHODS: From October 96 to March 98, 261 patients with UA were selected. Logistic regression models were developed to adjust the association between sex and HM for possible influence of covariables, such as hypertension, diabetes mellitus, dyslipidemia, sedentary lifestyle, smoking, and familial history of early coronary heart disease. RESULTS: HM due to UA was approximately three times higher in women (9.3%; 12/129) than in men (3.0%; 4/132) accounting for a relative risk of 3.07; 95% confidence interval (CI) =1.02-9.27. In logistic regression models, the association between sex and death was not significantly altered when the following parameters were considered: age, depression of the ST segment, history of previous AMI and risk factors for coronary heart disease. The nonadjusted and adjusted odds ratio (OR) for the distinct covariables were 3.28 (CI 95%=1.03-10.45) and 3.14 (CI = 95% = 0.88-11.20), respectively. CONCLUSION: Similarly to AMI, HM in UA is higher in women than in men. Age, risk factors for coronary heart disease, and depression of the ST segment in the electrocardiogram on patients' admission to the hospital did not significantly influence the association between sex and death.

Difference in susceptibility to lysis between clones of the Y strain of Trypanosoma cruzi

Three clones isolated from the Y strain of Trypanosoma cruzi - YP1, YP2 and YP3 - were adapted to in vitro cultivation in VERO cells. The recovery of the parasites from the Y strain and clone YP3 was similar after 24 hr of contact with cells (3.2% and 2.7%, respectively) and much lower than the recovery of clones YP1 and YP2 (56.7% and 60.0% of inoculum, respectively). After five days incubation, the ratio Trypomastigotes/Amastigotes released into the supernatants was about 90/10 for clone YP1, YP3 and Y strain, and 50/50 for clone YP2. After nine days, the ratio was 62/38 for clone YP1, 97/3 for clone YP3, 81/19 for Y strain and 50/50 for clone YP2. The susceptibility of tissue culture derived trypomastigotes (TCT) to lysis in the presence of chronic chagasic human sera and human complement was assessed using Complement Mediated Lysis reaction (CML). Trypomastigotes from clone YP2 were consistently less susceptible to CML (% lysis less than 20), than parasites from the other clones and Y strain. Parasites of clone YP3 had susceptibility to CML comparable to that of the Y strain (about 70%), while TCT of clone YP1 had intermediary susceptibility (40%).

Cross-sectional study defines difference in malaria morbidity in two Yanomami communities on Amazonian boundary between Brazil and Venezuela

It is well established that immunity to malaria is short-lived and is maintained by the continuous contact with the parasite. We now show that the stable transmission of malaria in Yanomami Amerindian communities maintains a degree of immunity in the exposed population capable to reduce prevalence and morbidity of malaria. We examined 508 Yanomami Amerindians living along Orinoco (407) and Mucajaí (101) rivers, on the Venezuelan and Brazilian Amazon region, respectively. At Orinoco villages, malaria was hyperendemic and presented stable transmission, while at Mucajaí villages it was mesoendemic and showed unstable transmission. The frequency of Plasmodium vivax and P. falciparum was roughly comparable in Venezuelan and Brazilian communities. Malaria presented different profiles at Orinoco and Mucajaí villages. In the former communities, malaria showed a lower prevalence (16% x 40.6%), particularly among those over 10 years old (5.2% x 34.8%), a higher frequency of asymptomatic cases (38.5% x 4.9%), and a lower frequency of cases of severe malaria (9.2% x 36.5%). Orinoco villagers also showed a higher reactivity of the immune system, measured by the frequency of splenomegaly (72.4% x 29.7%) and by the splenic index (71.4% over level 1 x 28.6), and higher prevalence (91.1% x 72.1%) and mean titer (1243 x 62) of antiplasmodial IgG antibodies, as well as a higher prevalence (77.4% x 24.7%) and mean titer (120 x 35) of antiplasmodial IgM antibodies. Our findings show that in isolated Yanomami communities the stability of malaria transmission, and the consequent continuous activation of the immune system of the exposed population, leads to the reduction of malaria prevalence and morbidity.

Identification of croplands of winter cereals in Rio Grande do Sul state, Brazil, through unsupervised classification of normalized difference vegetation index images

This study aimed to propose methods to identify croplands cultivated with winter cereals in the northern region of Rio Grande do Sul State, Brazil. Thus, temporal profiles of Normalized Difference Vegetation Index (NDVI) from MODIS sensor, from April to December of the 2000 to 2008, were analyzed. Firstly, crop masks were elaborated by subtracting the minimum NDVI image (April to May) from the maximum NDVI image (June to October). Then, an unsupervised classification of NDVI images was carried out (Isodata), considering the crop mask areas. According to the results, crop masks allowed the identification of pixels with greatest green biomass variation. This variation might be associated or not with winter cereals areas established to grain production. The unsupervised classification generated classes in which NDVI temporal profiles were associated with water bodies, pastures, winter cereals for grain production and for soil cover. Temporal NDVI profiles of the class winter cereals for grain production were in agree with crop patterns in the region (developmental stage, management standard and sowing dates). Therefore, unsupervised classification based on crop masks allows distinguishing and monitoring winter cereal crops, which were similar in terms of morphology and phenology.

Geometric nonlinear dynamic analysis of plates and shells using eight-node hexahedral finite elements with reduced integration

This work presents a geometric nonlinear dynamic analysis of plates and shells using eight-node hexahedral isoparametric elements. The main features of the present formulation are: (a) the element matrices are obtained using reduced integrations with hourglass control; (b) an explicit Taylor-Galerkin scheme is used to carry out the dynamic analysis, solving the corresponding equations of motion in terms of velocity components; (c) the Truesdell stress rate tensor is used; (d) the vector processor facilities existing in modern supercomputers were used. The results obtained are comparable with previous solutions in terms of accuracy and computational performance.

Application of the finite element method in cold forging processes

The demand for more efficient manufacturing processes has been increasing in the last few years. The cold forging process is presented as a possible solution, because it allows the production of parts with a good surface finish and with good mechanical properties. Nevertheless, the cold forming sequence design is very empirical and it is based on the designer experience. The computational modeling of each forming process stage by the finite element method can make the sequence design faster and more efficient, decreasing the use of conventional "trial and error" methods. In this study, the application of a commercial general finite element software - ANSYS - has been applied to model a forming operation. Models have been developed to simulate the ring compression test and to simulate a basic forming operation (upsetting) that is applied in most of the cold forging parts sequences. The simulated upsetting operation is one stage of the automotive starter parts manufacturing process. Experiments have been done to obtain the stress-strain material curve, the material flow during the simulated stage, and the required forming force. These experiments provided results used as numerical model input data and as validation of model results. The comparison between experiments and numerical results confirms the developed methodology potential on die filling prediction.

An alternative finite element formulation for determination of streamlines in two-dimensional problems

It is well known that the numerical solutions of incompressible viscous flows are of great importance in Fluid Dynamics. The graphics output capabilities of their computational codes have revolutionized the communication of ideas to the non-specialist public. In general those codes include, in their hydrodynamic features, the visualization of flow streamlines - essentially a form of contour plot showing the line patterns of the flow - and the magnitudes and orientations of their velocity vectors. However, the standard finite element formulation to compute streamlines suffers from the disadvantage of requiring the determination of boundary integrals, leading to cumbersome implementations at the construction of the finite element code. In this article, we introduce an efficient way - via an alternative variational formulation - to determine the streamlines for fluid flows, which does not need the computation of contour integrals. In order to illustrate the good performance of the alternative formulation proposed, we capture the streamlines of three viscous models: Stokes, Navier-Stokes and Viscoelastic flows.

There is no difference in hepatic fibrosis rates of patients infected with hepatitis C virus and those co-infected with HIV

Some studies have suggested that human immunodeficiency virus (HIV) infection modifies the natural history of hepatitis C virus (HCV) infection, accelerating the progression of fibrosis and the development of cirrhosis. Our objective was to evaluate the fibrosis progression rate (FPR) in HCV/HIV-co-infected patients, and to identify factors that may influence it. HCV-mono-infected and HCV/HIV-co-infected patients with a known date of HCV infection (transfusion or injection drug use) and a liver biopsy were included. The FPR was defined as the ratio between the fibrosis stage (Metavir score) and the estimated length of infection in years and the result was reported as fibrosis units per year. The factors studied were gender, age at infection, consumption of alcohol, aminotransferase levels, histological activity grade, HCV genotype and viral load, CD4 cell count, HIV viral load, and the use of antiretroviral therapy. Sixty-five HCV-infected (group 1) and 53 HCV/HIV-co-infected (group 2) patients were evaluated over a period of 19 months. The mean FPR of groups 1 and 2 was 0.086 ± 0.074 and 0.109 ± 0.098 fibrosis units per year, respectively (P = 0.276). There was a correlation between length of HCV infection and stage of fibrosis in both groups. The age at infection, the aspartate aminotransferase level (r = 0.36) and the inflammatory activity grade were correlated with the FPR (P < 0.001). No difference in FPR was found between HCV-mono-infected and HCV/HIV-co-infected patients.

Multicomponent diffusion during Prato cheese ripening: mathematical modeling using the finite element method

The partial replacement of NaCl by KCl is a promising alternative to produce a cheese with lower sodium content since KCl does not change the final quality of the cheese product. In order to assure proper salt proportions, mathematical models are employed to control the product process and simulate the multicomponent diffusion during the reduced salt cheese ripening period. The generalized Fick's Second Law is widely accepted as the primary mass transfer model within solid foods. The Finite Element Method (FEM) was used to solve the system of differential equations formed. Therefore, a NaCl and KCl multicomponent diffusion was simulated using a 20% (w/w) static brine with 70% NaCl and 30% KCl during Prato cheese (a Brazilian semi-hard cheese) salting and ripening. The theoretical results were compared with experimental data, and indicated that the deviation was 4.43% for NaCl and 4.72% for KCl validating the proposed model for the production of good quality, reduced-sodium cheeses.