Estudo espectroscópico de vidros a base de aluminato de cálcio contendo Nd3+

Multicomponent ( Al2O3, CaO, SiO2, MgO) calcium aluminate-based glasses containing Nd3+ were prepared in order to evaluate their possibilities as laser host materials. The refractive index, UV-visible-near IR absorption spectrum, IR and visible luminescence spectra, and fluorescence decay time were measured. Judd-Ofelt model was used to obtain experimental intensity parameters ( omega2, omega4 and omega6), emission cross-section, radiative lifetimes, emission branching ratios and quantum efficiency.

The mineralogy and chemistry of the German and Portuguese tiles used to face a historic building in the Amazon region and their natural susceptibility to tropical weathering

During the 19th century, the most prominent buildings of the city of Belém were faced entirely with tiles manufactured in Portugal and Germany, which now exhibit distinct degrees of degradation. The Pinho mansion is one of the most important of these buildings and was selected for the investigation of the action of the tropical Amazonian climate on the degradation of the tiles. To achieve this objective, the tiles were mapped for organic and inorganic degradation, and samples were collected for analysis. The minerals were determined by XRD, the chemical composition by classical wet methods and SEM/EDS, and the microorganisms under the microscope. The results show that the German and Portuguese tiles are quite different in their composition. While both ceramic bodies are composed of SiO2 and Al2O3, CaO was found only in the Portuguese tile. The low Na2O and K2O contents indicate the addition of materials to reduce the fusion temperature. SiO2 and PbO are the main constituents of the glaze, with CoO and FeO being added as pigment. The ceramic body of the German tiles is constituted of quartz, mullite, and cristobalite, in contrast with the Portuguese tiles, which are made of quartz, gehlenite, diopside, calcite, and feldspars. The glazes are XRD-amorphous. The chemical and mineralogical differences between the German and Portuguese tiles indicate that they were produced from different raw materials under distinct thermal processes. The most prominent weathering-related modifications are the thin layers (German tiles), oxidation stains, dark stains, the detachment of the tile (Portuguese tiles), loss of the glaze and powdering of the ceramic body (Portuguese tiles) through the establishment of Cyanophyta and Bacillariophyta.. The distinct degradation patterns of the tiles exposed to the tropical Amazon climate are a consequence of their distinct mineralogy and chemistry.

Estudos sôbre a neutralização do caldo de cana nas usinas de açúcar: I - determinação do CaO e MgO totais e CaO disponível da Cal

Neste trabalho, que faz parte de uma série de pesquisas relacionadas com a neutralização do caldo de cana nas usinas de açúcar, é descrita a técnica de determinação quelatométrica do CaO e MgO totais e CaO disponível da cal. Os resultados fornecidos pela técnica preconizada foram comparados com aqueles obtidos através do emprêgo de métodos usuais. São também apresentados os primeiros estudos efetuados a respeito da capacidade neutralizadora da cal, em função do seu teor em oxido de calcio total e disponível, quando empregada na forma solida, na neutralização do caldo de cana.

Evolução quantitativa de planossolos do agreste do estado de Pernambuco

A pedogênese dos solos planossólicos, especialmente da região do Agreste de Pernambuco, tem sido pouco estudada, havendo indicações e dúvidas relativas a alguns aspectos como a possível dualidade ou retrabalhamentos diferenciados na formação do material de origem, total das perdas e ganhos e a relativa mobilidade dos principais elementos constitutivos durante a evolução dos solos. Foram estudados três solos com marcantes contrastes texturais em uma topossequência da região. Foram estudados três solos com marcantes contrastes texturais em uma topossequência no Agreste de Pernambuco. Os objetivos da pesquisa foram averiguar a compatibilidade dos solos com os materiais geológicos subjacentes e avaliar quantitativamente as perdas e os ganhos ocorridos durante a pedogênese. Para isso foram realizadas análises química total e de zircônio (Zr) e quartzo, tomados como base para determinação de um índice de intemperização, em todos os horizontes dos solos e no material de origem. Verificou-se que os solos são constituídos por materiais autóctones, com apenas pequenas indicações de retrabalhamento dos materiais mais superficiais. Durante o processo de intemperização ou pedogênese, verificou-se perda de, aproximadamente, 50 % do peso original do solo. As perdas referentes aos principais elementos constituintes dos solos apresentaram a seguinte ordem: MgO > CaO > Fe2O3 > Al2O3 > SiO2. Os nítidos contrastes texturais, devido à argilização dos horizontes Bt, parecem ser principalmente resultado de uma combinação de outros processos, que não simples eluviação-iluviação.

Decomposição térmica de espumas de poliuretano para fabricação de vitrocerâmica celular de Li2O-ZrO2-SiO2-Al2O3 (LZSA)

Characterization of the thermal decomposition of polyurethane (PUR) foams was performed by Fourier-transformed infrared (FT-IR) spectroscopy and thermogravimetric analysis (TGA). Three main weight loss paths were observed by TGA, the residue being lower than 3 wt.% for 3 different PUR foams analyzed. FT-IR spectra indicated CO2, CO, NH3 and isocyanides as main decomposition products. PUR foams of different cell sizes were immersed in a slurry of the parent glass ceramic of composition Li2O-ZrO2-SiO2-Al 2O3 (LZSA) and submitted to heat treatment. The LZSA cellular glass ceramics obtained after sintering and crystallization resembled the original morphology of the PUR foams.

Processamento e caracterização de espumas vitrocerâmicas do sistema sncp (Sio2-Na2o-Cao-P2 O5)

Glass-ceramics foams prepared from glasses of the SiO2-Na2O-CaO-P2O5 by replication process were obtained and characterized in terms of their chemical and physical properties by X-ray fluorescence, X-ray diffraction, laser diffraction, thermal analysis, density, mechanical strength, microstructural and cytotoxic analysis. The results showed that it is possible to produce glass-ceramic foams by the replication method with optimized properties but cytotoxic analysis indicates that the glass-ceramic foams are not bioactive materials. Mechanical strength values varying from 0.5 to 1.0 MPa and from 0.8 to 2.3 MPa were reached for mean particle sizes of 10 and 6 µm, respectively.

Avaliação da biocompatibilidade de vidro e vitrocerâmica do sistema SNCP (SiO2-Na2O-CaO-P2O5)

This article reports research results related to bioactivity and cytotoxicity tests using neutral red uptake method for glass powders and bulk glass ceramics belonging to the SNCP (SiO2-Na2O-CaO-P2O5) system. The obtained materials showed bioactivity when immersed in SBF promoting the surface deposition of HAp. When analyzed as powders, cytotoxicity was evidenced in the processed materials but not when bulk samples were tested.

Influence of initial CaO/SiO2 ratio on the hydration of rice husk ash-Ca(OH)2 and sugar cane bagasse ash-Ca(OH)2 pastes

This work presents the results of a study on the hydration of pastes containing calcium hydroxide and either rice husk ash (RHA) or sugar cane bagasse ash (SCBA) in various initial CaO/SiO2 molar ratios. The products of the reactions were characterized by thermal analyses X-ray diffraction, and scanning electron microscopy. In the case of the RHA pastes, the product was composed of CaO-SiO2-H2O (type I C-S-H) or CaO-SiO2-H2O (type II C-S-H) according to the CaO/SiO2 ratio of the mixture. In contrast, in the case of the SBCA pastes, the product was composed primarily of CaO-SiO2-H2O that differed from both the previous types; the product also contained inclusions of calcium aluminate hydrates.

SYNGAS PRODUCTION FROM CO2-REFORMING OF CH4 OVER SOL-GEL SYNTHESIZED Ni-Co/Al2O3-MgO-ZrO2 NANOCATALYST: EFFECT OF ZrO2 PRECURSOR ON CATALYST PROPERTIES AND PERFORMANCE

Ni-Co/Al2O3-MgO-ZrO2 nanocatalyst with utilization of two different zirconia precursors, namely, zirconyl nitrate hydrate (ZNH) and zirconyl nitrate solution (ZNS), was synthesized via the sol-gel method. The physiochemical properties of nanocatalysts were characterized by XRD, FESEM, EDX, BET and FTIR analyses and employed for syngas production from CO2-reforming of CH4. XRD patterns, exhibiting proper crystalline structure and homogeneous dispersion of active phase for the nanocatalyst ZNS precursor employed (NCAMZ-ZNS). FESEM and BET results of NCAMZ-ZNS presented more uniform morphology and smaller particle size and consequently higher surface areas. In addition, average particle size of NCAMZ-ZNS was 15.7 nm, which is close to the critical size for Ni-Co catalysts to avoid carbon formation. Moreover, FESEM analysis indicated both prepared samples were nanoscale. EDX analysis confirmed the existence of various elements used and also supported the statements made in the XRD and FESEM analyses regarding dispersion. Based on the excellent physiochemical properties, NCAMZ-ZNS exhibited the best reactant conversion across all of the evaluated temperatures, e.g. CH4 and CO2 conversions were 97.2 and 99% at 850 ºC, respectively. Furthermore, NCAMZ-ZNS demonstrated a stable yield with H2/CO close to unit value during the 1440 min stability test.

Silicato de cálcio como fonte de silício para o arroz de sequeiro

No Brasil, o arroz de sequeiro é cultivado predominantemente em solos de cerrado, os quais, em razão do seu avançado grau de intemperização, apresentam baixos valores de pH, baixa saturação por bases e baixa relação Si/óxidos de Fe e Al. Assim, realizou-se um experimento em casa de vegetação, com objetivo de avaliar o efeito do silicato de cálcio no rendimento de grãos do arroz de sequeiro, bem como seu efeito corretivo na acidez do solo. Os tratamentos consistiram de seis doses de SiO2 (0; 125; 250; 375; 500 e 625 mg kg-1 de solo), na forma de volastonita Vansil-10 (50% de SiO2, 44 de CaO e 1,48 de MgO), e três cultivares de arroz de sequeiro (Caiapó, Carajás e Confiança), dispostos em delineamento inteiramente casualizado com quatro repetições. O rendimento de grãos aumentou de forma linear com a fertilização silicatada, mostrando correlação significativa e positiva com os teores de Si e Ca no solo, derivados da aplicação do silicato de cálcio. A aplicação de SiO2 aumentou o pH e os teores de Ca, Mg trocáveis e Si solúvel no solo.

Recuperação de metais de catalisadores usados de hidrotratamento (NiMo E CoMo/AL2O3)

This work presents a detailed study of the leaching behavior of deactivated hydrotreating catalysts (CoMo, NiMo/Al2O3) in presence of oxalate and NH4+ ions in various media. The yield of metals recovery may be optimized by adjusting several experimental parameters (time, temperature, etc). Leaching is limited by physical factors (diffusional effects caused by coke) and by the existence of silicate/spinel-like species which are poorly soluble in leaching solutions. Coke may be eliminated by an oxidation step at temperatures between 300-400ºC. Above 400ºC, solubilization of Ni and Co is drastically reduced. 50-90% wt of sulphate species and 15-30% wt of phosphate ions are solubilized during leaching. Silicon (as SiO2) is not solubilized. The best Ni-Co-Mo recoveries are in the 70-90% wt range; Fe recovery may be quantitative, whereas Al leaching may be lower than 5% wt.