Especiação de cobre e zinco em urina: importância dos metais em doenças neurodegenerativas

Metals such as copper and zinc are essential for the development and maintenance of numerous enzymatic activities, mitochondrial functions, neurotransmission, and also for memorization and learning. However, disruption in their homeostasis can cause neurodegenerative disorders such as the Alzheimer and Parkinson diseases. In this work, the speciation of copper and zinc in urine samples was carried out. To this end, free and total metal concentrations were determined by square wave anodic stripping voltammetry using a glassy carbon electrode coated with bismuth film. The digestion of the samples was performed in a microwave with the addition of oxidant reagents.

Avaliação da labilidade de alumínio em infusões de erva-mate empregando voltametria adsortiva de redissolução catódica

Infusions of yerba mate obtained at different stages of industrialization were evaluated to determine the bioavailable fraction of Al. Adsorptive Cathodic Stripping Voltammetry using DASA (complexing agent) was applied to determine the labile fraction of Al at pH 5.0 and pH 8.0 for the total fraction of dissolved Al. The results indicate that on average 60% of Al is complexed with organic compounds, minimizing their bioavailability; however, the labile fraction exceeds by up to 4 times the maximum weekly intake recommended by the World Health Organization.

ARSÊNIO E ARROZ: TOXICIDADE, METABOLISMO E SEGURANÇA ALIMENTAR

Arsenic is considered a semimetal, and its wide distribution in the Earth's crust in different chemical forms, including organic and inorganic species, has a great deal of influence on the mechanisms of toxicity. Exposure to arsenic can be either through occupational practice (use of pesticides) or by the consumption of water and food containing the element. Rice is considered a fundamental constituent of the basic diet of Brazilians and is usually cultivated in flooded conditions. Such a plantation system results in an increased amount of As in the soil and hence a greater accumulation of As in the plant, which is highlighted by the inorganic species' classification as highly toxic. Besides the use of mitigation techniques to reduce the toxicological risk, monitoring the concentration of As and its chemical species in rice and rice products is required through the establishment of legislation in the area. Thus, some world organizations are conducting improved research to determine and establish acceptable concentrations of As and its chemical species in rice, e. g., in 2012, FDA researchers described a chemical speciation methodology for As in rice and rice products. Hence, the application of existing chemical speciation methods and the establishment of parameters for ensuring food security and exposure risk assessment deserve particular consideration.

DISPOSITIVOS DGT MODIFICADOS COM MATERIAIS ALTERNATIVOS PARA USO NA ESPECIAÇÃO DE ELEMENTOS TRAÇO

The use of MT-K10 Montmorillonite immobilized onto agarose was investigated in this work as an alternative binding phase in Diffusive Gradient in Thin Film (DGT) devices for the determination of metallic labile species. In addition, agarose itself was also used as the diffusive phase. The percentage of sorption of Zn2+, Cu2+, Cr3+, Mn2+, Cd2+, Pb2+, and Ni2+ onto the binding phase was higher than 80% and the desorption process for all elements was also greater than 75%. Elution factors were determined experimentally, ranging from 0.74 for Zn2+ and 0.90 for Cr3+ and Pb2+. The accumulation of all species was linear with time, in agreement with the Fick's 1st law of diffusion. The deployment of the alternative devices in natural waters was compared to commercial devices. Labile concentrations determined by the alternative devices were slightly superior compared to results obtained with the deployment of original DGT devices due to the less restrictive pores of agarose.

METODOLOGIAS DE COLETA, PRESERVAÇÃO E ARMAZENAMENTO DE AMOSTRAS DE ÁGUA PARA ANÁLISE DE MERCÚRIO - UMA REVISÃO

Knowing the mercury levels of an environment allows a diverse array of biogeochemical studies into the mercury cycle on a local or global scale. Among matrices commonly evaluated, water remains a challenge for research because its mercury levels can be very low, requiring development of complex analytical protocols. Currently, sample preservation methods, protocols that avoid contamination, and analytical techniques with low detection limits allow analysis of mercury in pristine waters. However, different protocols suggest different methods depending on a range of factors such as the characteristics of water sampled and storage time. In remote areas, such as oceanic and Amazonian regions, sample preservation and transport to a laboratory can be difficult, requiring processing of the water during the sampling expedition and the establishment of a field laboratory. Brazilian research on mercury in water can be limited due to difficulty obtaining reagents, lack of laboratory structure, qualified personnel, and financial support. Considering this complexity for analyzing water, we reviewed methodologies for sampling, preservation, and storage of water samples for analysis of the most commonly evaluated mercury species (dissolved gaseous mercury, reactive mercury, methylmercury and total mercury).

Spectrophotometric study of iron oxidation in the iron(II)/thiocyanate/acetone system and some analytical applications

The possibility of using thiocyanate to determine iron(II) and/or iron(III) in water-acetone mixture has been re-examined as part of a systematic and comparative study involving metallic complexes of pseudohalide ligands. Some parameters that affect the complete oxidation of the ferrous cations, their subsequent complexation and the system stability have been studied to optimize the experimental conditions. Our results show the viability and potentiality of this simply methodology as an alternative analytical procedure to determine iron cations with high sensitivity, precision and accuracy. Studies on the calibration, stability, precision, and effect of various different ions have been carried out by using absorbance values measured at 480 nm. The analytical curve for the total iron determination obeys Beer's law (r = 0.9993), showing a higher sensitivity (molar absorptivity of 2.10x10(4) L cm-1 mol-1) when compared with other traditional systems (ligands) or even with the "similar" azide ion [1.53x10(4) L cm-1 mol-1, for iron-III/azide complexes, in 70% (v/v) tetrahydrofuran/water, at 396 nm]. Under such optimized experimental conditions, it is possible to determine iron in the concentration range from 0.5 to 2 ppm (15-65% T for older equipments, quartz cells of 1.00 cm). Analytical applications have been tested for some different materials (iron ores), also including pharmaceutical products for anemia, and results were compared with atomic absorption determinations. Very good agreement was obtained with these two different techniques, showing the potential of the present experimental conditions for the total iron spectrophotometric determinations (errors < 5%). The possibility of iron speciation was made evident by using another specific and auxiliary method for iron(II) or (III).

Reproductive phenology of Melocactus (Cactaceae) species from Chapada Diamantina, Bahia, Brazil

This paper discusses the phenological strategies of Melocactus glaucescens Buining & Brederoo, M. paucispinus G. Heimen & R. Paul, M. ernestii Vaupel and M. ×albicephalus Buining & Brederoo, species from Chapada Diamantina, northeastern Brazil. Melocactus glaucescens, M. ernestii and M. ×albicephalus occur sympatrically in an area of "caatinga"/"cerrado" vegetation, and M. paucispinus in an area of "cerrado"/"campo rupestre". The superposition of flowering in these sympatric taxa was compared and analyzed. The phenology of M. paucispinus was correlated with both abiotic and biotic factors. Flowering of M. glaucescens and M. ×albicephalus were observed to be continuous (though with moderate peaks of activity), while fruiting was sub-annual. Melocactus ernestii exhibited an annual pattern of both flowering and fruiting; while in M. paucispinus the same patterns were sub-annual. These sympatric taxa showed 40% overlap of flowering periods, reaching to more than 50% in paired combinations of taxa, considering both the number of specimens flowering, as well as the quantity of resources being offered. Available information indicates that these taxa share pollinators, but phenological data rejects the hypothesis of shared pollinators and supports the hypothesis of hybridization in the study area. Rainfall was negatively correlated with flowering in M. paucispinus, but positively correlated with fruiting. Flowering of M. paucispinus in dry periods of the year avoids that erect flowers positioned in terminal cephalium, exposed in open areas of the vegetation, be damaged for the rains, while fruiting in rainy periods can be favorable to the dispersion and germination of this species.

Chromosome polymorphism in Ctenomys minutus (Rodentia-Octodontidae)

A sample of 101 specimens of Ctenomys minutus was collected along its geographic range. Eight karyotypes (2n = 42, 45, 46a, 46b, 47, 48, 49 and 50) were found. The chromosome polymorphisms were due to Robertsonian rearrangements and tandem fusions. The distribution of polymorphisms indicated three population blocks: northern (2n = 49 and 50), central (2n = 46a, 47, and 48) and southern (2n = 42, 45, and 46b). These findings suggest that this species is undergoing a speciation process due to geographic isolation.

Low variation in ribosomal DNA and internal transcribed spacers of the symbiotic fungi of leaf-cutting ants (Attini: Formicidae)

Leaf-cutting ants of the genera Atta and Acromyrmex (tribe Attini) are symbiotic with basidiomycete fungi of the genus Leucoagaricus (tribe Leucocoprineae), which they cultivate on vegetable matter inside their nests. We determined the variation of the 28S, 18S, and 5.8S ribosomal DNA (rDNA) gene loci and the rapidly evolving internal transcribed spacers 1 and 2 (ITS1 and ITS2) of 15 sympatric and allopatric fungi associated with colonies of 11 species of leafcutter ants living up to 2,600 km apart in Brazil. We found that the fungal rDNA and ITS sequences from different species of ants were identical (or nearly identical) to each other, whereas 10 GenBank Leucoagaricus species showed higher ITS variation. Our findings suggest that Atta and Acromyrmex leafcutters living in geographic sites that are very distant from each other cultivate a single fungal species made up of closely related lineages of Leucoagaricus gongylophorus. We discuss the strikingly high similarity in the ITS1 and ITS2 regions of the Atta and Acromyrmex symbiotic L. gongylophorus studied by us, in contrast to the lower similarity displayed by their non-symbiotic counterparts. We suggest that the similarity of our L. gongylophorus isolates is an indication of the recent association of the fungus with these ants, and propose that both the intense lateral transmission of fungal material within leafcutter nests and the selection of more adapted fungal strains are involved in the homogenization of the symbiotic fungal stock.

Optimization and validation of a methodology to determine total arsenic, As(III) and As(V), in water samples, through graphite furnace atomic absorption spectrometry

The Graphite furnace atomic absorption spectrometry (GF AAS) was the technique chosen by the inorganic contamination laboratory (INCQ/ FIOCRUZ) to be validated and applied in routine analysis for arsenic detection and quantification. The selectivity, linearity, sensibility, detection, and quantification limits besides accuracy and precision parameters were studied and optimized under Stabilized Temperature Platform Furnace (STPF) conditions. The limit of detection obtained was 0.13 µg.L-1 and the limit of quantification was 1.04 µg.L-1, with an average precision, for total arsenic, less than 15% and an accuracy of 96%. To quantify the chemical species As(III) and As(V), an ion-exchange resin (Dowex 1X8, Cl- form) was used and the physical-chemical parameters were optimized resulting in a recuperation of 98% of As(III) and of 90% of As(V). The method was applied to groundwater, mineral water, and hemodialysis purified water samples. All results obtained were lower than the maximum limit values established by the legal Brazilian regulations, in effect, 50, 10, and 5 µg.L-1 para As total, As(III) e As(V), respectively. All results were statistically evaluated.