Estudo por espectroscopia no infravermelho da interação metal-suporte em Pt/TiO2. A influência da adsorção de hidrogênio

The influence of the presence of hydrogen on Pt/TiO2 catalysts submitted to reduction treatment has been studied by FT-IR at room temperature. After submitting to LTR treatment, the hydrogen spillover has been detected and the presence of hydrogen at the bulk is shown to produce a strong absorption in the infrared spectral region. After HTR treatment, the hydrogen is strongly chemissorbed.

Especiação de cobre e chumbo em sedimento do Rio Tubarão (SC) pelo método Tessier

The sequential extraction procedure proposed by Tessier and total digestion were applied for the analysis of sediment samples from Tubarão River. The recoveries were between 93.5 and 102.5% for Cu and 99.2 and 111% for Pb. The precision was tipically better than 6% for Cu and 3% for Pb. Comparison of the values obtained for the total digest with the sum of the extracted fractions showed that there were no significant losses in the extraction steps so that the method can be used for the monitoring availability and mobility of these analytes. According to ten points of sampling, was possible to determined the average of labiles phases (fractions 1 and 4) for Pb and Cu: 33.70% and 18.18%, respectively; and the inert phases (fraction 5- residual): 66.30% for Pb and 81.82% for Cu.

Hidrogenação eletrocatalítica de substratos orgânicos utilizando eletrodos modificados poliméricos contendo partículas de Ni/Pd e Ni/Pt

Novel modified electrodes bearing dispersed Pd and Pt particles have been prepared from poly (allyl ether of the p-benzenesulfonic acid) films with incorporated nickel particles making use of galvanic displacement reactions. The SEM analysis of the new modified electrodes revealed efficient deposition of Pd but weak up-take of Pt. Electrocatalytic hydrogenation of several classes of organic substrates were carried out using the MEs Ni, Ni/Pd and Ni/Pt. The Ni/Pd ME showed to be the best of them for the hydrogenation of double, triple and carbonyl bonds. The complete hydrogenation of the aromatic rings for the well-adsorbed substrates acetophenone and benzophenone is noteworthy.

Enriquecimento de compostos fenólicos de folhas de Inga edulis por extração em fase sólida: quantificação de seus compostos majoritários e avaliação da capacidade antioxidante

A phenolic fraction was obtained from of the acetone-water-acetic acid extract of Inga edulis leaves, by liquid-liquid partition and SPE-C18 cartridges. This method provided an increase of 108, 66, 51, 50 and 36% of flavonols, proanthocyanidins, total polyphenols, gallotannins and flavanols, respectively. The major phenolics in purified fraction were procyanidin B2, catechin and myricetin-3-O-α-L-rhamnopyranoside, which achieved increases of 111, 47 and 45%, respectively, after SPE. Acid hydrolysis confirmed the presence of procyanidins, prodelphinidins and glycosylated flavonoids.

Poisoning and regeneration of Pt-Pd/WO3-ZrO2 short paraffin isomerization catalysts

WO3-ZrO2 catalysts promoted with Pt and Pd were tested as paraffin isomerization catalysts using n-hexane as model compound. Sulfur and amine poisoning and regeneration tests were used to assess the impact of the addition of Pt and Pd on the deactivation resistance and regenerability. Pt and PtPd catalysts were the most active for n-hexane isomerization. The low activity of the Pd catalyst was attributed to poor Pd metal properties when supported over WO3-ZrO2 and to a decrease of the number of BrQnsted acid sites. PtPd was the only catalyst capable of full regeneration after S poisoning. Amine poisoning completely supressed the isomerization activity and the original activity could only be restored by calcination and reduction.

A comparison of electrodeposited Ti/β-PbO2 and Ti-Pt/β-PbO2 anodes in the electrochemical degradation of the direct yellow 86 dye

The electrochemical performance of electrodeposited Ti/β-PbO2 and Ti-Pt/β-PbO2 anodes was galvanostatically evaluated (batch mode, 50 mA cm-2) to degrade the Direct Yellow 86 dye (100 or 200 mg L-1 in 0.1 mol L-1 Na2SO4 + 1.5 g L-1 NaCl), investigating the effect of pH and temperature. Similar results were obtained for both electrodes and the best conditions for removal of color and chemical oxygen demand are pH 7 and 40 °C, when 90% decolorization is attained by passing a charge of only ~0.13 A h L-1 and total mineralization is achieved with expenditure of ~5 kW h m-3.

Determinação de deoxinivalenol e zearalenona em arroz natural e parboilizado e suas frações utilizando quEChERS e HPLC/UV-FL

The QuEChERS extraction method followed by quantification using HPLC/UV-FL was evaluated for deoxynivalenol (DON) and zearalenone (ZEA) determination in natural and parboiled rice and their fractions (bran and husk). The comparison between QuEChERS and partition with acetonitrile extraction showed that the first one was better. It presented higher recovery (91% for DON, 105% for ZEA) wih precision ranging from 1.5 to 18.6%. The limits of quantification were 22.2 µg kg-1 for DON and 4.3 µg kg-1 for ZEA. DON and ZEA showed higher levels in endosperm of parboiled rice (8 e 111.7 µg kg-1, respectively) when compared to natural rice.

Eletrodegradação de Ponceau 2R utilizando ânodos dimensionalmente estáveis e Ti/Pt

This paper reports the electrochemical degradation of the azo dye Ponceau 2R under galvanostatic electrolysis in the 1 to 200 mA cm-2 range at room temperature using dimensionally-stable anodes of oxygen (DSA-O2), chlorine (DSA-Cl2) and a titanium electrode of platinum coated with platinum oxide (Ti/Pt). The methodology applied was efficient for removing the color of the Ponceau 2R and the highest percentage removal of total organic carbon was obtained at 200 mA cm-2. Despite not having been observed complete mineralization, approximately80% removal of aromatic rings was estimated, resulting in drastic reduction of toxicity of the sample.

Isomerization-cracking of n-octane on catalysts based on heteropolyacid H3Pw12O40 and heteropolyacid supported on zirconia and promoted with Pt and Cs

Isomerization - cracking of n-octane was studied using H3PW12O40 (HPA) and HPA supported on zirconia and promoted with Pt and Cs. The addition of Pt and Cs to the supported HPA did not modify the Keggin structure. The Pt addition to the supported HPA did not substantially modify the total acidity; however, the Brönsted acidity increased significantly. Cs increased the total acidity and Brönsted acidity. A linear relation was observed between the n-C8 total conversion and Brönsted acidity. The most adequate catalysts for performing isomerization and cracking to yield high research octane number (RON) are those with higher values of Brönsted acidity.

Propriedades estruturais e eletrônicas de nanofilmes de TiO2 anatase: cálculos B3LYP-D* em sistemas periódicos bidimensionais

Structural and electronic properties of titanium dioxide (TiO2) thin films, in anatase phase, were investigated using periodic 2D calculations at density functional theory (DFT) level with B3LYP hybrid functional. The Grimme dispersion correction (DFT/B3LYP-D*) was included to better reproduce structural features. The electronic properties were discussed based on the band gap energy, and proved dependent on surface termination. Surface energies ranged from 0.80 to 2.07 J/m², with the stability orders: (101) > (100) > (112) > (110) ~ (103) > (001) >> (111), and crystal shape by Wulff construction in accordance with experimental data.

Herança da resistência à mancha-angular do feijoeiro e identificação de marcadores moleculares flanqueando o loco de resistência

A mancha-angular, cujo agente causal é o fungo Phaeoisariopsis griseola, é uma das principais doenças do feijoeiro comum (Phaseolus vulgaris). Os marcadores moleculares disponíveis ainda não são suficientes para monitorar todos os genes de resistência a essa doença. Por isso, objetivou-se neste trabalho estudar a herança da resistência aos patótipos 63.39 e 31.23 de P. griseola, em populações derivadas de 'Ouro Negro' (ON) e 'US Pinto 111' (PT), e identificar marcadores moleculares ligados a genes de resistência presentes nessas cultivares. Quando inoculadas com o patótipo 63.39, as plantas ON, F1 (ON x PT) e 3/4 da população F2 mostraram-se resistentes enquanto que PT e 1/4 da população F2 foram suscetíveis. Quando inoculadas com o patótipo 31.23, as plantas PT e 1/4 das famílias F2:3 foram resistentes e todas as demais, suscetíveis. Esses dados indicam que a resistência proveniente de ON é conferida por um gene dominante enquanto que a de PT, por um recessivo. Esses dois genes segregaram independentemente. Amostras de DNA das plantas F2 foram amplificadas pela técnica de RAPD (random amplified polymorphic DNA) de acordo com a estratégia de análise de bulks segregantes. Foram identificados os marcadores OPM02(460C) e OPAA19(600C,) respectivamente a 5,3 e 10 centimorgans (cM) do loco de resistência proveniente de ON. Eles flanqueiam este loco e, quando empregados simultaneamente, proporcionam uma eficiência de seleção de 97,4%. Não foram identificados marcadores para o loco de resistência proveniente de PT.

Resistência de linhagens de feijoeiro a quatro raças de Uromyces appendiculatus isoladas em Minas Gerais, Brasil

A identificação de fontes de resistência é uma etapa básica em programas de melhoramento que visam o desenvolvimento de cultivares resistentes a doenças. Neste trabalho, foram inoculadas, sob condições controladas, oito linhagens de feijoeiro-comum (Phaseolus vulgaris) desenvolvidas pelo Departamento de Agricultura dos Estados Unidos, com quatro raças conhecidas de Uromyces appendiculatus coletadas no estado de Minas Gerais, Brasil. A cultivar Ouro Negro foi utilizada como padrão de resistência e US Pinto 111 (suscetível universal) como padrão de suscetibilidade. Foi avaliada a freqüência de infecção (FI) e estimado o tamanho médio das pústulas (TMP). As linhagens BelMiDak-RMR-12 e BelMiDak-RR-3 destacaram-se como as mais resistentes, apresentando, para todas as raças, apenas pústulas (com diâmetro < 300mim) na face abaxial da folha. As linhagens BelDakMi-RMR-10 e BelNeb RR-2 apresentaram baixa FI média e foram resistentes a quatro e três raças, respectivamente. A linhagem BelDak-RR-2, apesar de sua resistência a todas as raças, apresentou uma FI média relativamente alta. As linhagens BelMiNeb-RMR-3 e BelDakMi RR-7 também foram resistentes às quatro raças testadas, porém apresentaram alta FI média e algumas pústulas com diâmetro maior que 300 mim. A linhagem BelDakMi-RMR-11 foi resistente às raças 45, 46 e 49 e moderadamente resistente à raça 52. A cultivar Ouro Negro foi resistente às quatro raças, com um nível de resistência igual às melhores linhagens norte americanas.

Expansão de lesão da mancha-reticular da cevada e sua interação com o tratamento de sementes

Experimentos foram conduzidos na FAMV/UPF, em 2002, com o objetivo de avaliar a influência do tratamento de sementes no processo de expansão de lesão pela mancha-reticular da cevada (Hordeum vulgare). Utilizaram-se as cultivares BR 2 e MN 698, com e sem tratamento de sementes com o fungicida triadimenol (40 g i.a./100 kg sementes), combinado com aplicações foliares de um fungicida triazol (tebuconazole) e uma combinação de triazól e estrobirulina (epoxiconazole + piraclostrobim), sob uma ou duas aplicações, em diferentes estádios fenológicos da planta. O tamanho das lesões e a severidade da doença foram avaliadas aos 62, 79, 88, 95, 103 e 111 dias após a semeadura. O tamanho da lesão foi significativamente menor nas plantas a partir de sementes com baixa incidência do patógeno, de sementes tratadas e plantas pulverizadas com fungicidas foliares. O número de aplicações, se uma ou duas, e o tipo de fungicida não influenciaram o tamanho das lesões. A severidade da mancha-reticular foi pequena, especialmente sob tratamento de sementes. Evidenciou-se o efeito restritivo do tratamento de sementes sobre o crescimento das lesões, o qual é um componente importante de epidemias por manchas foliares em cevada.

Characteristics of pyridine adsorption on Au(111) and Au(210) by EIS parameters fitting procedure

Some aspects of the application of electrochemical impedance spectroscopy to studies of solid electrode / solution interface, in the absence of faradaic processes, are analysed. In order to perform this analysis, gold electrodes with (111) and (210) crystallographic orientations in an aqueous solution containing 10 mmol dm-3 KF, as supporting electrolyte, and a pyridine concentration varying from 0.01 to 4.6 mmol dm-3, were used. The experimental data was analysed by using EQUIVCRT software, which utilises non-linear least squares routines, attributing to the solid electrode / solution interface behaviour described by an equivalent circuit with a resistance in series with a constant phase element. The results of this fitting procedure were analysed by the dependence on the electrode potential on two parameters: the pre-exponential factor, Y0, and the exponent n f, related with the phase angle shift. By this analysis it was possible to observe that the pyridine adsorption is strongly affected by the crystallographic orientation of the electrode surface and that the extent of deviation from ideal capacitive behaviour is mainly of interfacial origin.

Preparation and electrochemical characterization of Pt nanoparticles dispersed on niobium oxide

Electrodes consisting of Pt nanoparticles dispersed on thin films of niobium oxide were prepared onto titanium substrates by a sol-gel method. The physical characterization of these electrodes was carried out by X-ray diffraction, scanning electron microscopy and energy dispersive X-ray analysis. The mean size of the Pt particles was found to be 10.7 nm. The general aspects of the electrochemical behavior were studied by cyclic voltammetry in 1 mol L-1 HClO4 aqueous solution. The response of these electrodes in relation to the oxidation of formaldehyde and methanol in acidic media was also studied.