Caracterização e classificação do resíduo sólido "pó do balão", gerado na indústria siderúrgica não integrada a carvão vegetal: estudo de um caso na região de Sete Lagoas/MG

This research was developed by considering that the solid waste produced in the process of pig iron production represents the loss of raw materials and the increase in environmental problem. The charcoal based mini blast-furnace off gases dust named CHARCOK was collected from SIDERPA ¾ Siderúrgica Paulino Ltda, located in Sete Lagoas, Minas Gerais. The Charcok was characterized and classified according to ABNT (Associação Brasileira de Normas Técnicas) standard. The results showed that the Charcok should be classified as Class I Wastes ¾ "Hazard Wastes" because of its high concentration of phenols (54.5mg C6H5OH/kg). The Charcok had high concentration of iron and charcoal which can be used as energy source.

Imobilização de enzimas a partir de "kit" comercial: determinação de parâmetros metabólicos em sangue animal empregando multicomutação em fluxo

Automatic flow procedures based on the multicommutation concept, dedicated to the determination of 3-hydroxybutyrate, glucose and cholesterol are proposed. The enzymes were immobilized on glass beads and packed into mini-columns that were coupled to a flow system. Sampling throughputs of 55, 40 and 40 determinations per hour, linear response from 10 to 150, 50 to 600, 25 to 125 mg L-1, detection limits of 1.5, 14 and 4 mg L-1 and relative standard deviations of 1, 2 and 2% for 3-hydroxybutyrate, glucose and cholesterol, respectively, were achieved.

Tecnologia de nanocristais em fármacos

The use of poorly water soluble molecules in pharmaceutical area has grown. Since these molecules exhibit low oral bioavailability, they are not used in intravenous administrations. Therefore, it is necessary to develop their new formulations with the aim to increase their oral bioavailabilities as to enable intravenous applications. One of the few possibilities in achieving this is a nanonization process that can produce crystals smaller than 1 μm by high pressure homogenization and without use of organic solvents. This mini-review describes technical aspects of the nanocrystal production, morphological aspects (polymorphisms), the market relevance of the nanocrystals products that are already in clinical phase or at the market, as well as, perspectives for the near future.

Construção e aplicação de um minissensor de filme de bismuto utilizando materiais de baixo custo para determinações voltamétricas in loco

The construction of a low cost mini sensor containing a bismuth-film electrode (BiFE), as work electrode, a silver electrode as pseudo reference electrode, and copper as counter electrode is proposed. The application of this mini sensor using a low cost electrochemical cell for in loco voltammetric determinations of inorganic and organic analytes is also described.

Miniprojeto para ensino de química geral experimental baseado na fermentação do caldo de cana-de-açúcar

This paper describes a five-week mini-project for a general chemistry laboratory course. Activities are included preparations of ethanol and sucrose solutions, calculation of concentrations, determination of densities with densimeters, sugarcane juice fermentation with CO2 capture in alkaline solution, distillation, and determination of amounts of ethanol and CO2 formed. Abilities and concepts normally present in practical general chemistry courses are covered: use of balances, volumetric glassware and densimeters, preparation of solutions, performing of dilutions, determination of solution densities, observation of chemical reactions, stoichiometric calculations, separation of mixtures, and titration.

Miniprojeto para ensino de Química Orgânica Experimental baseado no acoplamento catalítico N-C promovido por micro-ondas

This paper describes a three-week mini-project for an Experimental Organic Chemistry course. The activities include N-C cross-coupling synthesis of N-(4-methoxyphenyl) benzamide in an adapted microwave oven by a copper catalyst (CuI). Abilities and concepts normally present in practical organic chemistry courses are covered: use of balances, volumetric glassware, separation of mixtures (liquid-liquid extraction and filtration), chromatographic techniques, melting point determination and stoichiometric calculations.

Use of experimental design in the optimisation of a solid phase preconcentration system for Cobalt determination by GFAAS

In this work is proposed a solid phase preconcentration system of Co2+ ions and its posterior determination by GFAAS in which fractional factorial design and response surface methodology (RSM) were used for optimization of the variables associated with preconcentration system performance. The method is based on cobalt extraction as a complex Co2+-PAN (1:2) in a mini-column of polyurethane foam (PUF) impregnated with 1-(2-pyridylazo)-naphthol (PAN) followed by elution with HCl solution and its determination by GFAAS. The chemical and flow variables studied were pH, buffer concentration, eluent concentration and preconcentration and elution flow rates. Results obtained from fractional factorial design 2(5-1) showed that only the variables pH, buffer concentration and interaction (pH X buffer concentration) based on analysis of variance (ANOVA) were statistically significant at 95% confidence level. Under optimised conditions, the method provided an enrichment factor of 11.6 fold with limit of detection and quantification of 38 and 130 ng L-1, respectively, and linear range varying from 0.13 to 10 µg L-1. The precision (n = 9) assessed by relative standard deviation (RSD) was respectively 5.18 and 2.87% for 0.3 and 3.0 µg L-1 cobalt concentrations.

Determination of Hg in water by CVAAS using 2-aminothiazole modified silica

This paper discusses a rapid and sensitive method developed to determine trace levels of mercury in natural water samples by cold vapor atomic absorption spectrometry using a preconcentration system composed by mini-column packed with 100 mg of 2-aminothiazol modified silica gel (SiAT) coupled on-line with the spectrometer's cold vapor generator system. The optimum preconcentration conditions are also described here. The preconcentrated Hg(II) ions were eluted directly from the column to the spectrometer's cold vapor generator system using 100 µL of 2 mol L-1 hydrochloric acid and the retention efficiency achieved exceeded 95%. The enrichment factors determined were 29, 38 and 46 using 3, 4 and 5 mL of preconcentrated aqueous solutions containing 400 ng L-1 of Hg. The detection limit calculated was 5 ng L-1. The preconcentration procedure was applied to determine trace level mercury in spiked river water samples.

Potential impact of the global climate changes on the spatial distribution of areas of risk for the occurrence of eucalyptus rust in Brazil

Rust, caused by Puccinia psidii, is one of the most important diseases affecting eucalyptus in Brazil. This pathogen causes disease in mini-clonal garden and in young plants in the field, especially in leaves and juvenile shoots. Favorable climate conditions for infection by this pathogen in eucalyptus include temperature between 18 and 25 ºC, together with at least 6-hour leaf wetness periods, for 5 to 7 consecutive days. Considering the interaction between the environment and the pathogen, this study aimed to evaluate the potential impact of global climate changes on the spatial distribution of areas of risk for the occurrence of eucalyptus rust in Brazil. Thus, monthly maps of the areas of risk for the occurrence of this disease were elaborated, considering the current climate conditions, based on a historic series between 1961 and 1990, and the future scenarios A2 and B2, predicted by IPCC. The climate conditions were classified into three categories, according to the potential risk for the disease occurrence, considering temperature (T) and air relative humidity (RH): i) high risk (18 < T < 25 ºC and RH > 90%); ii) medium risk (18 < T < 25 ºC and RH < 90%; T< 18 or T > 25 ºC and RH > 90%); and iii) low risk (T < 18 or T > 25 ºC and RH < 90%). Data about the future climate scenarios were supplied by GCM Change Fields. In this study, the simulation model Hadley Centers for Climate Prediction and Research (HadCm3) was adopted, using the software Idrisi 32. The obtained results led to the conclusion that there will be a reduction in the area favorable to eucalyptus rust occurrence, and such a reduction will be gradual for the decades of 2020, 2050 and 2080 but more marked in scenario A2 than in B2. However, it is important to point out that extensive areas will still be favorable to the disease development, especially in the coldest months of the year, i.e., June and July. Therefore, the zoning of areas and periods of higher occurrence risk, considering the global climate changes, becomes important knowledge for the elaboration of predicting models and an alert for the integrated management of this disease.

Propagação da corticeira do banhado (Erythrina crista-galli L.) (FABACEAE) pelo processo de estaquia

A corticeira-do-banhado é uma árvore nativa com uso ornamental no paisagismo urbano e possui potencial de utilização em áreas desprotegidas e degradadas, devido a sua rusticidade. Entretanto, tendo em vista a dificuldade de obtenção de sementes, pela baixa produção e qualidade destas com a conseqüente desuniformidade da germinação, torna-se necessário aprofundar o estudo de outras formas de propagação dessa espécie. Desse modo, conduziu-se este trabalho na Faculdade de Agronomia e Medicina Veterinária da Universidade de Passo Fundo, com o objetivo de estudar a formação de mudas de Erythrina crista-galli L. pela técnica da estaquia. Em quatro experimentos foram testadas doses do fitorregulador ácido indolbutírico (AIB), em diferentes tipos de estacas (lenhosas, semilenhosas, herbáceas e foliares) e substratos. Os resultados indicaram que mini-estacas herbáceas, coletadas de plantas jovens, com menos de 1 ano de idade, são as mais indicadas (75% a 100% de enraizamento), e o uso do AIB diminuiu a mortalidade, ao favorecer o processo do enraizamento. Em razão do ataque de insetos (brocas) às plantas no seu hábitat, recomenda-se a técnica de jardim clonal, com a formação de matrizeiros no viveiro, fornecendo material juvenil e sadio em maior escala para a propagação dessa espécie por miniestacas.

Accelerated ageing like a vigour test to diasporas of Myracrodruon urundeuva Fr. Allem

This work established the adequate temperature and the period of exposition for the accelerated ageing test with diasporas of Myracrodruon urundeuva from an area of the Cerrado in the state of Mato Grosso, Brazil. Before and after the ageing, at the temperatures of 40ºC, 41ºC, 42ºC and 45ºC combined with periods of 12, 18, 24, 30 and 36 hours, the water content and germination were evaluated. For each treatment, 12g of diasporas in mini chambers with 40 mL of distilled water were submitted to the accelerated ageing test. A total of 100 diasporas, divided into four replications, in plastic boxes, on two sheets of blotting paper, in germinator at 25ºC and 8 hours of photoperiod were germinated. In all treatments the content of water of the aged diasporas was superior to 20% and this value stabilized itself between 25% and 28%, from the 18 hours of exposition. Independently of the tested periods, the ageing at the temperatures of 40ºC, 41ºC and 42ºC did not affect the germination. After the ageing at 45ºC, the germination did not differ among the periods of 12, 18 and 24 hours of exposition, but in all these periods it was inferior to the control and superior to the periods of 30 and 36 hours. In these last two periods, fungi were observed. The accelerated ageing of diasporas of Myracrodruon urundeuva should be conducted at the temperature of 45ºC, during the exposition periods of 12 to 24 hours.

Sistemas de classificações geotécnicas de solos: estudo de caso aplicado à rodovia não pavimentada vcs 346, Viçosa, MG

Este artigo aborda uma contribuição às classificações geotécnicas tradicionais de solos Unified Soil Classification System (USC), Transportation Research Board System (TRB) e a Metodologia Miniatura, Compactado, Tropical (MCT) para um caso aplicado à rodovia municipal não pavimentada VCS 346, no Município de Viçosa, MG, considerando-se várias amostras deformadas de solos coletadas no subleito da referida via. Os principais objetivos deste estudo residem na contribuição de um banco de dados geotécnicos sobre classificações de solos tropicais, bem como na verificação de possíveis agrupamentos entre os sistemas geotécnicos tradicionais de classificação e a metodologia MCT. O programa de laboratório envolveu a realização dos seguintes ensaios: (i) granulometria conjunta; (ii) limites de Atterberg (LL e LP); (iii) massa específica dos grãos do solo; (iv) compactação Mini-MCV; e (v) perda de massa do corpo-de-prova por imersão em água. Os resultados possibilitaram verificar que, após a classificação das amostras, vários agrupamentos entre os sistemas de classificações geotécnicas tradicionais coincidiram com aqueles já apresentados na metodologia MCT e, considerando a pedogênese da região de Viçosa, MG, para o grupo NG', houve a contribuição dos grupos SC, SM e CL do Sistema USC e do grupo A-4 do Sistema TRB.

Avaliação do subleito de rodovias vicinais de baixo volume de tráfego por meio de ensaios geotécnicos

Este artigo aborda a viabilidade técnica do uso de solos locais, preferencialmente os de comportamento geotécnico laterítico, em camadas de reforço do subleito de rodovias vicinais de baixo volume de tráfego, através de ensaios geotécnicos e da classificação MCT (Miniatura, Compactado, Tropical). Para este propósito, consideraram-se amostras deformadas de solos coletadas no subleito das estradas VCS 493 e VCS 296, pertencente à malha rodoviária vicinal do município de Viçosa-MG, Brasil. O programa de estudo de laboratório envolveu a realização dos seguintes ensaios: (i) granulometria conjunta; (ii) limites de Atterberg (LL e LP); (iii) massa específica dos grãos do solo; (iv) compactação e CBR realizados na energia do Proctor normal; (v) compactação Mini-MCV; e (vi) perda de massa do corpo-de-prova por imersão em água. Os resultados desta pesquisa possibilitaram verificar que os solos de comportamento laterítico foram enquadrados no grupo LG' na classificação MCT e que, mesmo apresentando valores de Limite de liquidez e Índice de plasticidade elevados, quando compactados na energia do Proctor normal e, conseqüentemente, imersos em água, não apresentaram expansão com valor significativo no ensaio de CBR. Por outro lado, as areias saprolíticas apresentam perda de massa por imersão (Pi) difícil de ser previsto na Metodologia MCT, pois podem apresentar valores muito elevados e baixos, conforme a compacidade atingida durante o processo de compactação dos corpos-de-prova, como pode ser notado no resultado da amostra 8.

‘Sweet grape’ tomato post harvest packaging

ABSTRACT This paper aims at evaluating the shelf life of mini tomatoes (Lycopersicum esculentum Mill.) cultivar ‘Sweet Grape’, grown in hydroponics, and stored under environmental and refrigerated conditions inside different packages. We adopted a completely randomized design, in which treatments were combinations of storage conditions: environment (e) and refrigerated (r) with packaging: polyvinyl chloride film (PVC); low-density polyethylene (LDPE); biofilm of tomato fruit of Solanum lycocarpum A.St.-Hil (lobeira) (TFB); cassava starch biofilm (CSB); carnauba wax (Copernicia prunifera) (CW), and without packaging - control (C). Physicochemical and sensory tests were carried out at the beginning (day zero), and at 8, 19, and 33 days of storage (DS). Fruit stored inside PVCr, LDPEe, LDPEr, and CWr had an acceptable shelf life of 33 days. The use of cassava and tomato starches were not effective in controlling fruit fresh weight loss. ‘Sweet Grape’ tomato postharvest conservation was enhanced under refrigerated conditions. The sensory evaluation results revealed that CWr treatment most pleased appraisers, while PCV had the highest rejection rate.

Avaliação da função pulmonar após colecistectomias laparoscópicas e convencionais

OBJETIVO: Avaliar a função pulmonar pós-colecistectomias laparoscópicas e subcostais abertas. MÉTODOS: Tratou-se de um ensaio randomizado, onde se avaliaram espirometrias pós-operatórias de dois grupos, cada qual com 15 pacientes. O grupo GL foi submetido a colecistectomia laparoscópica. O grupo GA foi submetido a colecistectomia por via subcostal, por meio de mini-laparotomia e abreviado tempo anestésico-cirúrgico. As variáveis dos dois grupos foram comparadas entre si por meio da ANOVA. Entre um mesmo grupo, antes e depois das operações, utlizou-se do teste t-Student emparelhado. Um valor de p < 0,05 foi considerado estatisticamente significativo. RESULTADOS: Todas as pacientes, dos dois grupos, apresentaram distúrbios ventilatórios restritivos pós-operatórios, com normalização espirométrica mais rápida nas pacientes operadas por laparoscopia. Grupos GL X GA, no pós-operatório imediato: Capacidade vital forçada (p < 0,001) e Volume Expiratório forçado em 1 segundo (p < 0,001). CONCLUSÕES: O prejuízo pós-operatório da função pulmonar foi significativamente menor nas colecistectomias laparoscópicas do que nas abertas, mesmo por meio de mini-laparotomia e abreviado tempo anestésico-cirúrgico.