Desenvolvimento de método analítico para quantificação do efavirenz por espectrofotometria no UV-Vis

An UV-Vis spectrophotometry analytical method for quantifying Efavirenz was developed and validated as an alternative to replace the HPLC current method. The report method presents sample concentration of 10 μg mL-1, dissolved in a solution ethanol:water (60:40, v/v), economic and technically adequate for the purpose adopted. The results and the statistical treated proved that the method being considered an precise and accurate analytical low cost alternative for laboratory routine. The adaptability of this method in product and other analytical methods development has been challenged by mathematical calculation of drug extinction coefficient in water and methanol and practical experiments, showing interesting results.

Caracterização e quantificação de contaminantes em aguardentes de cana

The objective of the present study was the evaluation of the presence of organic and inorganic contaminants in samples of aged cachaça from the South of the state of Minas Gerais. Furfural, methanol and copper were determined by colorimetric reactions, while the analyses of ethyl carbamate and acrolein were performed by GC/MS and HPLC, respectively. High levels of furfural and copper were obtained. All samples showed concentrations below the established by legislation for the ethyl carbamate, and for acrolein, only one sample showed higher levels. Methanol was not detected in the samples.

Quantificação de antimônio em garrafas de politereftalato de etileno (PET) brasileiras por fluorescência de raios-X e avaliação quimiométrica para verificar a presença de pet reciclado através do teor de ferro

Antimony is a common catalyst in the synthesis of polyethylene terephthalate used for food-grade bottles manufacturing. However, antimony residues in final products are transferred to juices, soft drinks or water. The literature reports mentions of toxicity associated to antimony. In this work, a green, fast and direct method to quantify antimony, sulfur, iron and copper, in PET bottles by X-ray fluorescence spectrometry is presented. 2.4 to 11 mg Sb kg-1 were found in 20 samples analyzed. The coupling of the multielemental technique to chemometric treatment provided also the possibility to classify PET samples between bottle-grade PET/recycled PET blends by Fe content.

Quantificação sérica de vitamina C por CLAE-UV e estudo de estabilidade

Vitamin C, an exogenous antioxidant, is essential to human health. In this study, a method was validated to serum vitamin C quantification by HPLC-UV. Its stability with and without the use of tris [2-carboxy-ethyl] phosphine hydrochloride (TCEP), at -20 and -80 °C, in serum and supernatant were also evaluated. Analysis showed r² > 0.99, precision CV% < 15% and % bias < 15%, being linear, precise and accurate. The stability test revealed that using TCEP in serum storage at -20 and -80 °C or in supernatant at -80 °C the vitamin C levels remain stable for 30 and 12 days, respectively.

Avaliação de procedimentos para quantificação espectrofotométrica de flavonoides totais em folhas de Bauhinia forficata Link

Interest in analytical methods for quality control of herbal drugs has grown sharply due to the scarcity of monographs in official manuals. Thus, the aim of the present study was to evaluate analytical procedures for quantitative determination of flavonoids from leaves of Bauhinia forficata Link (pata-de-vaca). Two procedures for quantification of total flavonoids (with and without acid hydrolysis) by spectrophotometry were tested. The proposed methods proved to be specific, sensitive, precise, accurate and robust, being suitable for routine laboratory use.

Desenvolvimento e validação de método analítico por CLAE para a quantificação simultânea de dipropionato de betametasona e fosfato sódico de betametasona em suspensão injetável

A reversed-phase HPLC method was developed and validated to separate and simultaneously quantify the association of betamethasone sodium phosphate (BP) and betamethasone dipropionate (BD) in injectable suspensions. Chromatographic conditions were ternary gradient elution at 1.6 mL/min on a C18 column with 254 nm. The linearity of the method was established in the range 120 to 280 mg/mL BD, and 48 to 112 mg/mL BP. The RSD of intermediate precision of the method was <1% and recoveries were 99-101% for both drugs. The method proved selective, linear, precise, accurate and robust for quantifying BP and BD in commercial injectable suspensions.

Desenvolvimento e validação de método analítico para quantificação do fármaco bevacizumabe por cromatografia a líquido de alta eficiência

In this study, an analytical method was developed and validated for quantitation of the drug bevacizumab (Avastin®) by high performance liquid chromatography (HPLC). The HPLC column was a BioSuite 250® HR SEC, 300 x 7.8 mm x 5 µm (Waters, USA). The mobile phase consisted of phosphate buffered saline (PBS). The results revealed that the method was specific, precise, accurate, robust and linear (r² = 0.998) from 5 to 75 µg mL-1. Therefore, this method can be used in drug release studies or in quality control ampoules of the drug.

Quantificação dos isômeros ácido L-ascórbico e ácido D-iso-ascórbico em geleias de frutas por cromatografia líquida de alta eficiência

Ascorbic acid has important nutritional characteristics such as high antioxidant potential, preventing diverse damage and diseases in the tissues and the process of aging. Different isomeric forms of the ascorbic acid can be found in nature and each one have different potential antioxidant and different activity pro-vitamin C. This work examined a method to detect and quantify the isomers L-ascorbic acid (LAA) and D-iso-ascorbic acid (DIAA) in jelly fruit. The method showed acceptable selectivity, linearity, repeatability and recovery. DIAA was not found in the analyzed samples, but LAA was found up to 605 mg in 100 g of sample.

Desenvolvimento e validação de um método analítico por CLAE para quantificação de ácido ursólico em dispersões sólidas

Ursolic acid is a natural molecule that presents several pharmacological properties. In this work, an analytical method by RP-HPLC has been developed and validated for quantification of this drug in the solid dispersions, using PEG 6000 and Poloxamer 407 as polymers. The method was specific, linear in the range of 1.0-50.0 µg mL-1 (r<0.99), precise (CV < 5% for both inter- and intra-assays), accurate (maximum deviation of ± 13%), and robust to the parameters evaluated. This method has proved to be simple and useful for ursolic acid determination in solid dispersions, enabling its determination in pharmaceutical dosage form.

Estudo da emissão por fluorescência de ultravioleta na quantificação de um inibidor de corrosão do tipo sal de amônio quaternário em água

Quaternary ammonium salts are the corrosion inhibitors most frequently used by the oil industry. In this study, the ultraviolet fluorescence technique was evaluated for the analysis of a quaternary ammonium salt in water as a corrosion inhibitor. The comparison with standard salt showed that an alkyl aryl quaternary ammonium salt is the main fluorophore, with emission maxima at 306 and 593 nm. The best instrumental parameters were: width of excitation and emission slits of 10 and 15 nm, respectively, and scan rate of 10 nm min-1. The presence of aromatic compounds and biocides affects the analysis of corrosion inhibitors.

Quantificação de salicilato de metila em quatro gêneros de polygalaceae, por CLAE-DAD

Polygalaceae is represented in Brazil by ten genera and 191 species, of which the Polygala is the most representative, characterized by the occurrence of methyl salicylate. Seventeen species of Polygalaceae have been analyzed by HPLC-DAD and the technique proved to be selective, precise, accurate, and with low limits of quantification and detection. The analysis of plant material confirmed the presence of methyl salicylate, with concentration values ​​ranging from 14.1 a 126.9 µg/g.

Desenvolvimento e validação de um método analítico por espectrofotometria UV para quantificação de carvedilol

This paper reports the development and validation of a new analytical method using UV spectrophotometry to quantify carvedilol (CRV) in hydrophilic matrices and raw material. This method was shown to be linear, accurate, precise, robust and to have adequate limits of quantification and detection (LQ and LD, respectively), allowing its use in the dissolution test of hydrophilic matrices. The content of CRV determined through this method was compared with two previously validated methods based on the reference techniques of High Performance Liquid Chromatography (HPLC) and Potentiometric Titrations (PT). ANOVA confirmed the equivalence of these methods, showing no significant differences.

AVALIAÇÃO DAS NORMAS DE ENSAIO APLICADAS NA QUANTIFICAÇÃO DE PCBs EM ÓLEO ISOLANTE

Polychlorinated biphenyls (PCBs) were widely used between 1940 and 1970 as an insulating fluid for transformers and capacitors. However, they are bioaccumulative and potentially carcinogenic and, according to the 2001 Stockholm Convention, must be eliminated by 2025. In Brazil, they have been gradually eliminated but contaminated equipment remains. The Brazilian official standard for PCBs content in oil analysis is the ABNT NBR 13882 and there is also the IEC 61619 International Standard, both based on GC-ECD quantification. This work identified the inefficiency of these analytical methods and highlights potential failures which generated discrepancies on quantification of these contaminants. It was observed that the IEC 61619 is superior to ABNT NBR 13882 in analytical criteria, but has problems with the inefficiency of the adsorbent material used in pretreatments for removal of oxidation products from oil where these adsorbents adsorbed some PCBs molecules, causing errors in quantification.

Quantificação do efeito do crestamento bacteriano comum na eficiência fotossintética e na produção do feijoeiro

O efeito do agente causal do crestamento bacteriano comum na eficiência fotossintética e na produção do feijoeiro (Phaseolus vulgaris) foi quantificado. Dois experimentos de campo foram conduzidos durante a safra das águas de 1997, em Piracicaba-SP, com duas cultivares, IAC-Carioca e Rosinha. Diferentes níveis de severidade foram obtidos variando-se o número de inoculações com o patógeno. A severidade da doença, avaliada com auxílio de escala diagramática, não apresentou relação linear significativa (P>0,01) com a produção, enquanto a duração da área foliar sadia (HAD) relacionou-se linearmente de forma significativa (P<=0,01) com a produção nos dois experimentos (R² entre 0,66 e 0,78). A fotossíntese foi relacionada com área foliar doente por meio da equação Px/P0=(1-x )beta, onde Px é a fotossíntese líqüida da folha com severidade x, P0 é a fotossíntese líquida média das folhas sadias, x é a severidade da doença e beta expressa a relação entre lesão virtual e lesão visual. Os valores de beta, determinados por regressão não-linear, foram de 3,19±0,14 e 3,08±0,18 para as cultivares IAC-Carioca e Rosinha, respectivamente. A incorporação de beta ao cálculo de HAD, de modo geral, não melhorou significativamente o ajuste dos dados.

Quantificação de propágulos de Gibberella zeae no ar e infecção de anteras em trigo

Devido ao aumento da ocorrência e da intensidade de epidemias nos últimos anos, a giberela tem sido apontada como uma das doenças que mais danos causa em cereais de inverno. O principal inóculo do fungo patógeno (Giberella zeae) são os ascosporos produzidos em peritécios sobre os restos culturais da maioria das espécies cultivadas. Os esporos são transportados a longas distâncias pelo vento e depositados sobre as anteras causando infecção. Os objetivos do presente trabalho foram quantificar a densidade de esporos no ar, a incidência da infecção em anteras de trigo (Triticum aestivum), a intensidade da doença no campo e elucidar o papel das anteras no processo infeccioso. Durante o período correspondente à antese do trigo, foram coletados, em média, 6,6 esporos/10 cm²/dia, em 1999 e 13,5 esporos/10 cm²/dia em 2000. No estádio de floração plena, a infecção por G. zeae foi de 11,8% nas anteras soltas e de 24,3% nas anteras presas. As condições ambientais após a antese influenciaram a intensidade da doença no campo. Os resultados reforçam que as anteras presas desempenham um papel importante no processo infeccioso e, portanto, devem ser os principais sítios de infecção a serem protegidos com fungicidas.