134 resultados para Jatropha crop
Resumo:
Experiments were carried out under laboratory, growth chamber, and field conditions to evaluate the effect of Plant growth-promoting and bioprotecting rhizobacteria (PGPBR) seed treatment on seed pathogens, seed germination, plant growth, and grain yield of wheat (Triticum aestivum). Most of the PGPBR strongly reduced the recovery of the pathogens from infected wheat seeds. All treatments, except the chemical iprodione + thiram, significantly promoted plant growth over the nontreated control. Psudomonas putida biotype A (11) and P. agglomerans (14) showed the greatest effects. Field experiments, carried out at two locations, indicated that all treatments, except P. chlororaphis (42), significantly increased seedling emergence of wheat . In Pato Branco, PR, P. putida biotype A (11) and P. putida biotype B (44) presented the best results, both being superior to fungal biological and chemical treatments. In Passo Fundo P. putida biotype A (11) and P. putida biotype B (17 and 44) significantly improved yield over the nontreated control. Yield increases of these three PGPBR were similar to the chemical treatment iprodione + thiram. In Pato Branco, P. putida biotype A (11) and P. putida biotype B (17), as well as the chemical treatment, provided significant increase over the nontreated control. Yield increases by the PGPBR varied from 18% to 22% in Passo Fundo and from 27% to 28% in Pato Branco.
Resumo:
Wheat (Triticum aestivum) powdery mildew, caused by the biotrophic fungus Blumeria graminis f. sp. tritici, is one of the most severe foliar diseases attacking this crop, reducing grain yields by 10% to 62% in Brazil. The disease can be controlled by genetic resistance of the host, but the pathogen has physiological specialization, which enables it to infect wheat cultivars that have remained resistant for years. The objective of this work was to evaluate the variability of pathogenic strains of B. graminis f. sp. tritici collected in Brazil and the effectiveness of wheat resistance genes to powdery mildew in the 2003 crop season. Plants of a differential series were inoculated with each monopustular isolate. Thirty-one combinations of effective and ineffective resistance genes were identified. Only the gene Pm4a+... remained totally effective to all isolates, and gene Pm6 was highly effective (below 10% of susceptibility), whereas genes Pm3a and Pm8 were totally ineffective (susceptible to all isolates). Genes Pm3c, D1, and D2 showed low effectiveness (above 50% of susceptibility), and genes Pm1, 2, 4a, 1+?, and 2+Mld had mean effective results to most strains (susceptibility between 10% and 49%). The virulence formula Pm1, 3c, 4a, 6, 1+?, 2+Mld, 4a+..., D2 (effective genes) / 2, 3a, 8, D1 (ineffective genes) was most frequently found, accounting for 15% of the occurrences. The most frequent number of ineffective genes was seven, ranging from three to ten.
Resumo:
Botrytis blight caused by Botrytis cinerea is an important disease of rose (Rosa hybrida) grown in greenhouses in Brazil. As little is known regarding the disease epidemiology under greenhouse conditions, pathogen survival in crop debris and as sclerotia was evaluated. Polyethylene bags with petals, leaves, or stem sections artificially infected with B. cinerea were mixed with crop debris in rose beds, in a commercial plastic greenhouse. High percentage of plant parts with sporulation was detected until 60 days, then sporulation decreased on petals after 120 days, and sharply decreased on stems or leaves after 90 days. Sporulation on petals continued for 360 days, but was not observed on stems after 150 days or leaves after 240 days. Although the fungus survived longer on petals, stems and leaves are also important inoculum sources because high amounts of both are deposited on beds during cultivation. Survival of sclerotia produced on PDA was also quantified. Sclerotia germination was greater than 75% in the initial 210 days and 50% until 360 days. Sclerotia weight gradually declined but they remained viable for 360 days. Sclerotia were produced on the buried petals, mainly after 90 days of burial, but not on leaves or stems. Germination of these sclerotia gradually decreased after 120 days, but lasted until 360 days. Higher weight loss and lower viability were observed on sclerotia produced on petals than on sclerotia produced in vitro
Resumo:
Jatropha curcas L., conhecida popularmente como pinhão-manso, é uma espécie encontrada em quase todas as regiões intertropicais do planeta. Possui sementes oleaginosas de importância medicinal e econômica, sendo apontada atualmente como promissora fonte de matéria-prima para a produção de biocombustíveis. Os objetivos deste trabalho consistiram em identificar as diferentes fases do processo de germinação, descrever e ilustrar a morfologia de sementes e plântulas de Jatropha curcas L. e os aspectos anatômicos das sementes, relacionando as mudanças que ocorrem nos tecidos durante as fases de embebição. Para a análise morfológica das sementes e plântulas, observaram-se os detalhes externos e internos. Para o estudo das fases de germinação, foi realizado um ensaio para avaliar o comportamento das sementes durante a embebição; para a análise anatômica, foram preparadas lâminas permanentes com cortes das sementes após 0, 4, 24 e 72 h de embebição. As sementes de Jatropha curcas L. são endospermáticas, elípticas e anátropas com tegumento glabro, possuindo poros e fissuras em sua superfície. Os cotilédones são foliáceos, com formato cordiforme e nervuras trinérvias. A germinação é do tipo fanerocotiledonar, epígea. Anatomicamente, as sementes são albuminosas, sendo o tegumento constituído de células parenquimáticas, vacuoladas e poligonais com feixes vasculares e células esclereficadas. O endosperma é composto por células poliédricas ricas em substâncias de reserva, principalmente lipídios. Durante as fases de germinação, observaram-se alterações no acúmulo de grânulos de amido presentes no endosperma, bem como mudanças na organização dos seus feixes vasculares.
Resumo:
The use of saline water and the reuse of drainage water for irrigation depend on long-term strategies that ensure the sustainability of socio-economic and environmental impacts of agricultural systems. In this study, it was evaluated the effects of irrigation with saline water in the dry season and fresh water in the rainy season on the soil salt accumulation yield of maize and cowpea, in a crop rotation system. The experiment was conducted in the field, using a randomized complete block design, with five replications. The first crop was installed during the dry season of 2007, with maize irrigated with water of different salinities (0.8, 2.2, 3.6 and 5.0 dS m-1). The maize plants were harvested at 90 days after sowing (DAS), and vegetative growth, dry mass of 1000 seeds and grain yield were evaluated. The same plots were utilized for the cultivation of cowpea, during the rainy season of 2008. At the end of the crop, cycle plants of this species were harvested, being evaluated the vegetative growth and plant yield. Soil samples were collected before and after maize and cowpea cultivation. The salinity of irrigation water above 2.2 dS m-1 reduced the yield of maize during the dry season. The high total rainfall during the rainy season resulted in leaching of salts accumulated during cultivation in the dry season, and eliminated the possible negative effects of salinity on cowpea plants. However, this crop showed atypical behavior with a significant proportion of vegetative mass and low pod production, which reduced the efficiency of this strategy of crop rotation under the conditions of this study.
Resumo:
Soil tillage is a process that accelerates soil organic matter decomposition transferring carbon to atmosphere, mainly in the CO2 form. In this study, the effect of rotary tillage on soil CO2 emission was investigated, including the presence of crop residues on the surface.Emissions were evaluated during 15 days after tillage in 3 plots: 1) non-tilled and without crop residues on soil surface (NTwo), 2) rotary tiller without the presence of crop residues on soil surface (RTwo), and 3) rotary tiller with the presence of crop residues in soil surface (RTw). Emissions from the RTw plot were higher than the other plots, (0.777 g CO2 m-2 h-1), with the lowest emissions recorded in the NTwo plot (0.414 g CO2 m-2 h-1). Total emission indicates that the difference of C-CO2 emitted to atmosphere corresponds to 3% of the total additional carbon in the crop residues in the RTw plot compared to RTwo. The increase in the RTwo emission in comparison to NTwo was followed by changes in the aggregate size distribution, especially those with average diameter lower than 2 mm. The increase in emission from the RTw plot in relation to RTwo was related to a decrease in crop residue mass on the surface, and its higher fragmentation and incorporation in soil. When the linear correlation between soil CO2 emission, and soil temperature and soil moisture is considered, only the RTw treatment showed significant correlation (p<0.05) with soil moisture.
Resumo:
O presente trabalho teve o objetivo de ajustar diferentes modelos matemáticos aos dados experimentais da secagem de sementes de pinhão-manso (Jatropha curcas L.), bem como determinar o coeficiente de difusão efetivo e obter a energia de ativação para a faixa de temperatura utilizada. As sementes de pinhão-manso com teor de água de 0,67 (decimal b.s.) passaram por um período de pré-secagem em ambiente natural para reduzir e homogeneizar o teor de água para 0,30 (decimal b.s.). Em seguida, a secagem foi realizada em secador experimental mantendo-se as temperaturas controladas de 30; 40; 50; 60 e 70 ± 1 ºC e umidades relativas de 55,98; 41,44; 35,35; 26,21 e 13,37 ± 3%, respectivamente. Aos dados experimentais foram ajustados onze modelos matemáticos utilizados para a representação do processo de secagem de produtos agrícolas. Conclui-se que, dentre os modelos analisados, Page e Henderson e Pabis Modificado apresentaram os melhores ajustes aos dados experimentais, sendo o modelo de Page selecionado para a descrição das curvas de secagem do pinhão-manso devido a sua simplicidade; o coeficiente de difusão efetiva aumenta com a elevação da temperatura, apresentando magnitudes entre 3,93x10-10 e 9,19x10-10 m² s-1 para o intervalo de temperatura de 30 a 70 ºC, respectivamente; e a energia de ativação para a difusão líquida do pinhão-manso durante a secagem foi de 15,781 kJ mol-1.
Resumo:
The aim of this study was to characterize the spatial variability of soil bulk density (Bd), soil moisture content (θ) and total porosity (Tp) in two management systems of sugarcane harvesting, with or without burning, in a Haplustox soil, in the 0-0.20 m layer. The study area is located in Rio Brilhante, state of Mato Grosso do Sul, Brazil, in Eldorado Sugar Mill. The plots have presented 180 m length, and 145.6 m width, totaling 90 points distributed in the form of a grid of nine rows by ten columns, with points spaced 20 m from its neighbor. Soil samples were collected at 0-0.20 m layer in 2007/2008 and 2008/2009 crops. The harvest with burning system had a higher density compared to mechanized harvest, in the two study periods. The moisture content as well as the porosity increased proportionally with the decrease of the density of the harvest burning system compared to the mechanized.
Resumo:
The knowledge of the evapotranspiration (ETc) and crop coefficient (Kc) is fundamental to plan and to manage the irrigation of any crop. The aim of this study was to determine the daily and hourly evapotranspiration of drip irrigated watermelon (Citrullus Lanatus, var. Crimson Sweet) and crop coefficient (Kc) in each crop development phase. The experiment was carried out in an experimental area of 1.27 ha of Embrapa Mid-North, localized in Parnaíba (02°54'S, 41°47'W and 46 m above of sea), State of Piauí, Brazil, from September to November, 2006. Electronic weighing lysimeters of 1.5 m x 1.5 m wide and long and 1.0 m deep were used to obtain the evapotranspiration. The plants were drip irrigated with a lateral row per plant row and drippers spaced 0.5 m from each other. The reference evapotranspiration (ETo) was estimated using the Penman-Monteith equation from the climatic data obtained by electronic sensors. The total evapotranspiration during the watermelon crop cycle cultivated in the state of Piauí was 233.87 mm, with mean values of 3.7 mm day-1, minimum of 1.18 and maximum of 8.14 mm day-1. The Kc of the drip irrigated watermelon was 0.18 in the initial stage of crop growth; 0.18 to 1.3, in crop development stage; 1.3 in the intermediate stage and 0.43 in the final stage.
Resumo:
Under organic management in Seropédica-RJ, Brazil, using a weighing lysimeter, the crop coefficients (kc), the maximum evapotranspiration and the productivity of eggplant cultivation under two cropping systems (no tillage with straw plus soil with conventional preparation) were determined. A whole randomized layout with two treatments (no tillage and conventional) and five replicates during 134 days of cultivation were adopted. There were no significant differences in the eggplant cultivation in the two cropping systems, with a maximum commercial productivity obtained from 47.42 Mg ha-1 for the no-tillage system, and 47.91 Mg ha-1 for the conventional tillage. The accumulated ETc was 285.15 and 323.44 mm for the no-tillage and conventional, respectively. The crop coefficients value for the phases: 1 - transplanting, flowering, 2 - flowering-fruiting, 3 - fruit- first harvesting, 4- first harvesting of the final crop cycle was 0.83, 0.77, 0.90 and 0.97 in no-tillage system for the respective phases and for the conventional one 0.81, 1.14, 1.17 and 1.05 for the same steps described above.
Resumo:
This study evaluates the impacts of climate change on the agricultural zoning of climatic risk in maize crop cultivated in the Northeastern of Brazil, based on the Intergovernmental Panel on Climate Change (IPCC) reports. The water balance model, combined with geospatial technologies, was used to identify areas of the study region where the crops could suffer yield restrictions due to climate change. The data used in the study were the time series of rainfall with at least 30 years of daily data, crop coefficients, potential evapotranspiration and duration of the crop cycle. The scenarios of the increasing of air temperature used in the simulations were of 1.5ºC, 3ºC and 5ºC. The sowing date of maize crop from January to March appears to be less affected by warming scenarios than the sowing in November and December or April and May.
Resumo:
It was evaluated the effect of irrigation management on the production characteristics of coffee cultivar Acaiá MG-1474, planted in spacing of 3.00 m x 0.60 m, pruned in 2004, and irrigated by drip since the planting, in 1997. The experimental designed used was of randomized blocks with five treatments and four replications. The treatments consisted of irrigation management strategies, applying or not applying controlled moisture deficit in layer of 0 to 0.4m, in dry seasons of the year: A = no irrigation (control), B = irrigation during all year considering the factor of water availability in the soil (f) equal to 0.75, C = irrigation during all year considering f = 0.25, D = irrigation during all year, but in January /February /March /July /October /November /December with f = 0.25 and April /May /June /August /September with f = 0.75, E = irrigation only during April /May /June /August /September with f = 0.25. From July /2005 to June /2007 the applied water depth was defined based on Class A pan evaporation (ECA) and the period from July/2007 to June/2008 based on readings of matric potential of soil obtained from Watermark® sensors. Each plot consisted of three rows with ten plants per row, considering as useful plot five plants of center line. The results indicated that the E irrigation management was the most suitable for technical reasons.
Resumo:
The use of irrigation has been increased significantly in wheat crops in Brazil. This study aims to evaluate the effect of irrigation on the productivity, on flour technological quality and on the wheat root system. In a field experiment conducted at IAPAR, in Londrina -state of Paraná (PR), Brazil, the IPR 118 cultivar was grown under sprinkler irrigation (Irrigated Treatment) and without irrigation (Non-irrigated Treatment). The productivity was determined by harvesting three samples of 25 m² per treatment. The same samples were used to evaluate the flour technological quality, considering, among other parameters, gluten strength (W). The evaluation of the root system was performed after the harvest, considering a profile of 0 to 45 cm of soil depth, and sampling eight plants per treatment. The profile wall method was used to determine the roots number (RN) and the monolith method to determine the root dry mass (RDM). Irrigation increased wheat productivity in three times, while W was reduced in the flour. Nevertheless, the value of W found in the Irrigated Treatment (249 10-4 J) was sufficient to keep wheat classification as bread type, the same as IPR 118 cultivar is classified. The measured values of RN and RDM were similar or higher for the Non-irrigated Treatment.
Resumo:
The water absorbent polymer effect on vegetative growth and production of Theoretical Recovery Sugar (TRS) of sugarcane cv. RB 86 7515 was evaluated on two field tests installed in randomized blocks, with four treatments and five repetitions. The polymer doses were 0; 4; 8 and 12 g m-1 of furrow (test 1) and 0; 1.4; 2.8 and 4.2 g m-1 of furrow (test 2). Test 1 (dec/2007 to may/2009) was implanted in a Distroferric Red Argisol soil in Presidente Prudente - State of São Paulo (SP), Brazil; and the test 2 (Aug/2008 to Aug/2009) was implanted in a Red Yellow Argisol soil in Lucélia - State of São Paulo (SP), Brazil. In test 2, there were no significant differences for any evaluated parameters. In both tests the polymer doses equal to or less than 4 g m-1 of furrow showed no significant effect on the evaluated parameters. In test 1, the polymer doses of 8 and 12 g m-1 of the conditioning polymer increased the number of tillers in stage II of development and led to the largest amount of straw. The gross income per hectare has positive relation with the polymer doses. The polymer had no significant effect on the sugarcane stems productivity and technological parameters.
Resumo:
The aim of this study was to quantify the water consumption and the crop coefficients (Kc) for the potato (Solanum tuberosum L.), in Seropédica, Rio de Janeiro (RJ), Brazil, under organic management, and to simulate the crop evapotranspiration (ETc) using the Kc obtained in the field and the ones recommended by the Food and Agriculture Organization (FAO). The water consumption was obtained through soil water balance, using TDR probes installed at 0.15m and 0.30m deep. At the different stages of development, the Kc was determined by the ratio of ETc and reference evapotranspiration, obtained by Penman-Monteith FAO 56. The crop coefficients obtained were 0.35, 0.45, 1.29 and 0.63. The accumulated ETc obtained in the field was 109.6 mm, while the ETc accumulated from FAO's Kc were 142.2 and 138mm, respectively, considering the classical values and the values adjusted to the local climatic conditions. The simulation of water consumption based on meteorological data of historical series from 1961 to 2007 provided higher value of ETc when compared with the one obtained in the field. From the meteorological data of historical series, it was observed that the use of Kc recommended by FAO may overestimate the amount of irrigation water by 9%, over the same growing season.