O comportamento do elétron: uma análise do efeito compton e da relação de Broglie

The De Broglie's relation was a fundamental step in the development of a wave nature for matter. Therefore, we have examined it from the perspective of the new atomic theory. This relation makes successful predictions of the stable energy levels for electrons orbiting a nucleus. The formulation of the de Broglie's relation is a fundamental application of the theory of wave-particle duality for a material particle. In this work, the direct demonstration employing the equations E = mc² and E = hcλ, was avoided. We provide a complete analysis of this relation considering features of the special theory of relativity.

Efeito do intemperismo artificial em quatro madeiras tropicais monitorado por espectroscopia de infravermelho (DRIFT)

Four tropical woods, were investigated to compare their performance and natural resistances to artificial weathering using the diffuse reflectance infrared Fourier transform spectroscopy (DRIFT). The species were garapeira (Apuleia leiocarpa), itaúba (Mezilaurus itauba) and tauari (Couratari sp.), woods traditionally indicated for exterior uses, and marupá (Simarouba amara), that served as reference. The samples were submitted to cycles of UV radiation (350 nm) and water until 2,000 h. The photodegradation processes of woods surfaces were accomplished monitoring the changes in the intensities associated to lignin (1508 cm-1) and carbonyl group (1736 cm-1) absorptions. The results have shown that lignin was the first component to be photodegradated, resulting in surfaces mainly composed by cellulose, after 2,000 h of UV irradiation. The processes of formation and lixiviation of carbonyl compounds were different for each species. The experimental conditions used in this work were too severe to evaluate the wood density and extractives content influences during the treatment.

Efeito da composição das correntes do conversor das unidades de FCC no desempenho catalítico de aditivos DESOx

Hydrotalcite-like compounds having Mg partially replaced by Cu or Mn were prepared and used as precursors for two mixed oxides (Cu-OM50 and Mn-OM50) that were evaluated for SOx removal in the presence of O2, NO and CO. Under SO2/O2 reaction system, SOx removal was slightly higher over Cu-OM50. The addition of CO and NO to the feed markedly hindered the SO2 oxidation over Cu-OM50 while no significant effect was observed for Mn-OM50. For the regeneration step, the use of propane instead of H2 reduces regeneration capacity, mainly for Cu-OM50. Mn-OM50 was less affected by the feed composition, suggesting that it was a promising additive for SOx removal.

Efeito do tratamento térmico na microestrutura, turbostraticidade e superfície de carbono vítreo reticulado analisado por XPS, espalhamento Raman e voltametria cíclica

The structural and surface properties of reticulated vitreous carbon (RVC) were discussed as a function of its heat treatment temperature (HTT), for samples produced in the range from 700 to 2000 ºC, using the furfuryl precursor resin. The samples were analyzed by x-ray photoelectron spectroscopy, first and second order Raman scattering as well as electrochemical response. Exploring the material turbostraticity concept, the interdependence between the RVC chemical surface variation and its defects were demonstrated. The influence of heteroatom presence was discussed in the material ordering for HTT lower than 1300 ºC while the graphitization process evolution was also pointed out for HTT higher than 1500 ºC.

Estudo da degradação fotocatalítica de dimetil dissulfeto: avaliação estatistica do efeito do pH da temperatura e concentração do contaminante orgânico

This work aimed to assess the photocatalytic degradation of a model odor compound (dimethyl disulfide, DMDS), found in liquid and gaseous wastes of plants for processing poultry byproducts. The effect of pH and temperature on adsorption and photocatalytic degradation was evaluated through factorial experimental designs. The results suggest the presence of an optimum region for adsorption, at 45.0 ºC and pH 4.0. In the photocatalytic runs an optimum for temperature and pH was also observed. At 45 ºC and pH 4.0 the removal of DMDS was 99% after 60 min of irradiation.

Efeito de substâncias empregadas para remoção de cobre sobre o teor de compostos secundários da cachaça

High copper content is of great concern among producers of sugar-cane spirits who frequently use filters instead of cleaning the stills. This study compared the efficiency of activated carbon, ion-exchange-polymeric resin, and activated-carbon/iron-oxide magnetic composite for copper reduction without removing excessive organic compounds that are important for the beverage's quality. Resin was the most efficient copper adsorbent, removing fewer organic compounds. The composite also removed copper; however, it also removed large amounts of organic compounds. Activated carbon didn't remove sufficient copper to reduce its concentration to less than 5 g L-1, and it removed large amounts of higher alcohols and esters.

Efeito de matriz na quantificação de agrotóxicos por cromatografia gasosa

The lack of accuracy of a chromatographic method can be associated with the matrix effect. This effect is observed in pesticide quantification by gas chromatography when the chromatographic signals of standards prepared in solvents are compared with those of the analyte in extracts of complex matrices. In the competition between the matrix components and the pesticides for the active sites of the liner, a larger amount of pesticides is transferred to the column, giving apparent extractions above 100%. In this work, we discuss factors that contribute to the matrix effect and present some attempts to overcome the problem.

Efeito da adição de precursores na produção de alcaloide anticancerígeno usando a técnica de planejamento experimental

The effect of precursors on the anticancer alkaloid production by submerged fermentation using M. anisopliae 3935 was studied, according to complete experimental design 2² with three central points. The results showed that lysine was the most important variable, however, when both lysine and glucose were added to the fermentation medium, the alkaloid production reached, approximately, 17 mg L-1 after 120 hours of fermentation. Then, the scale-up of the process was carried out and these results were confirmed. Finally, 35 mg L-1 of alkaloid at 192 h were attained after increment of added aminoacid lysine.

Sorção do inseticida tiametoxam em latossolos sob efeito de fosfato e vinhaça

Little information is available on the behavior of thiamethoxam in soils, whereas many studies show the effect of phosphate and vinasse in soils in Brazil. This study evaluated the sorption, desorption and retention of thiamethoxam in vinasse- and phosphate-amended samples of a dystrophic Red-Yellow Latosol (LVAd) and a distroferric Red Latosol (LVdf). The LVAd presented higher sorption of thiamethoxam. Phosphate did not affect the sorption or retention and vinasse increased the interaction of the compound with the soil particles, reducing desorption to the soil solution.

Efeito da concentração de enzima e de substrato no grau de hidrólise e nas propriedades funcionais de hidrolisados proteicos de corvina (Micropogonias furnieri)

The objective of this work was to obtain hydrolysates with different degrees of hydrolysis using Alcalase 2.4L® and to evaluate the effect of the enzyme [E] and substrate [S] concentration on the functional properties of the hydrolysates. It was obtained hydrolysates with hydrolysis degree values ranging from 12.2 to 43.7%. The values of solubility and water holding capacity were similar for the greater number of the hydrolysates with minimum values in the pH 5.0. The hydrolysis degree showed direct relationship with the solubility and indirect with the water holding capacity, oil holding capacity, emulsifying capacity and foaming capacity.

Efeito da acidez e de modificadores orgânicos na determinação de metilxantinas: um experimento de cromatografia liquida de alta eficiência (CLAE) empregando otimização uni e multivariada

In this work a new experiment using HPLC is proposed in order to explore the role of acidity and the organic modifiers in the determination of methylxanthines in tea and coffee. Multivariate and univariate optimizations of the experimental conditions were used.

Efeito da aplicação de nitrato na redução biogênica de sulfeto sob diferentes concentrações iniciais de bactérias redutoras de nitrato e sulfato

The effect of sodium nitrate application in the reduction of biogenic sulphide was evaluated through a 2k complete factorial design, using as variable response the production of sulfide at intervals of incubation of 7, 14 and 28 days. The most effective condition for reducing the sulphide production (final concentrations from 0.4 to 1.6 mg S2- L-1) was obtained with an initial population of sulphate-reducing bacteria and nitrate-reducing bacteria of 10(4) MPN mL-1 and 427.5 mg L-1 nitrate. The results also suggested that the applications of nitrate to control the process of souring should follow a continuous scheme.

Organização supramolecular da ftalocianina de cobalto(II) e seu efeito na oxidação do aminoácido cisteína

The interest in the chemistry of cobalt (II) tetrasulfonated phthalocyanine (PcTsCo) comes mainly from its macrocycle-ligand structure combined with their special chemical characteristics, such as high solubility, well-defined redox reactions and remarkable optical absorption in the visible region. In this work, we use layer-by-layer technique in order to assemble CoTsPc and poly(allylaminehydrochloride) (PAH) in hybrid supramolecular system. The electronic spectroscopy and cyclic voltammetry techniques were utilized to study PAH/CoTsPc multilayers growth and the cysteine catalytic oxidation. PAH/CoTsPc showed high electrochemical stability and worthwhile to mention is the remarkable influence of supramolecular arrangement on the final redox properties of the system.

Propriedades reológicas e efeito da adição de sal na viscosidade de exopolissacarídeos produzidos por bactérias do gênero Rhizobium

Viscosity of some polysaccharide solutions supports that these molecules can be applied in food sectors. Four exopolysaccharides (R1, R2, R3, R4) produced by different Rhizobium strains were selected. Sugar composition and differences in the uronic acid contents suggests that chemical structure of these molecules can vary when different culture conditions and strains are analyzed. The Power Law was the rheological model used to represent the experimental data of shear stress versus shear rate. All exopolysaccharides showed non-Newtonian behavior, with pseudoplastic characteristics. R1, R2 and R4 showed a slight increase in viscosity in the presence of 0,2 M NaCl.