72 resultados para orbital magnetization
Resumo:
In this work the adsorption features of hydrotalcites (Al, Mg- CO3) and the magnetic properties of iron oxides have been combined in a composite to produce a magnetic adsorbent. These magnetic composites can be used as adsorbents for anionic contaminants in water and subsequently removed from the medium by a simple magnetic process. The magnetic hydrotalcites were characterized by XRD, magnetization measurements, N2 adsorption isotherms and Mössbauer spectroscopy. These magnetic adsorbents show remarkable adsorption capacity for anionic contaminants in water.
Resumo:
The objective of this work was to determine the influence of hyperconjugative interactions on the ¹J CH coupling constant for hexamethylenetetramine (1) and adamantane (2). For this end, theoretical and experimental ¹J CH were obtained and hyperconjugative interactions were investigated using NBO. It was observed, theoretically and experimentally, that ¹J CH in 1 is 20 Hz larger than in 2, mainly due to the nN®s*C-H hyperconjugative interaction. This interaction occurs only in 1, with an energy of 9.30 kcal mol-1. It increases the s-character of the carbon atom in the C-H bond and the occupancy of the sigma*C-H orbital in (1).
pH effect on the synthesis of magnetite nanoparticles by the chemical reduction-precipitation method
Resumo:
This work aimed at putting in evidence the influence of the pH on the chemical nature and properties of the synthesized magnetic nanocomposites. Saturation magnetization measurements evidenced a marked difference of the magnetic behavior of samples, depending on the final pH of the solution after reaction. Magnetite and maghemite in different proportions were the main magnetic iron oxides actually identified. Synthesis with final pH between 9.7-10.6 produced nearly pure magnetite with little or no other associated iron oxide. Under other synthetic conditions, goethite also appears in proportions that depended upon the pH of the synthesis medium.
Resumo:
For this study, magnetic composite of zeolite-magnetite was prepared by mixing magnetite nanoparticles suspension with synthetic zeolite. The nanoparticles in suspension were synthesized by precipitating iron ions in a NaOH solution. The zeolite was synthesized from coal fly ash by alkaline hydrothermal treatment. The magnetic composite was characterized by XDR, SEM, magnetization measurements, IR, and BET surface area. Batch tests were carried out to investigate the adsorption of metal ions of Zn2+, Cd2+ and Pb2+ from aqueous solution onto magnetic composite. Adsorption isotherms were analyzed using Freundlich and Langmuir equations. The adsorption equilibrium data fitted well to the Langmuir equation with maximum adsorption capacities in the range of 28.5-127 mg g-1.
Resumo:
This work describes the synthesis and characterization of two new compounds with ligand opy (N-(2-pyridyl)oxamate): the copper(II) precursor [Me4N]2[Cu(opy)2].5H2O and CoII CuII coordination polymer {[CoCu(opy)2]}n×4nH2O. This latter compound was obtained by reaction of [Me4N]2[Cu(opy)2].5H2O and CoCl2.6H2O in water. The heterobimetallic CoII CuII chain was characterized by elemental analysis, IR spectroscopy, thermogravimetry and magnetic measurements. Magnetic characterization revealed typical behavior of one-dimensional (1D) ferrimagnetic chain as shown in the curves of temperature (T) dependence of magnetic susceptibility (χM), in the form of χMT versus T, and dependence of magnetization (M) with applied field (H).
Resumo:
The aim of this paper was to present a simple and fast way of simulating Nuclear Magnetic Resonance signals using the Bloch equations. These phenomenological equations describe the classical behavior of macroscopic magnetization and are easily simulated using rotation matrices. Many NMR pulse sequences can be simulated with this formalism, allowing a quantitative description of the influence of many experimental parameters. Finally, the paper presents simulations of conventional sequences such as Single Pulse, Inversion Recovery, Spin Echo and CPMG.
Resumo:
Chlorine, one of the most frequent elements on earth and most important key chemicals, is indispensable in the syllabi of school and university courses in Inorganic Chemistry. However, its toxicity and high volatility preclude experimental demonstration of its properties in secondary and high schools and most university labs. This paper summarises the industrial role of chlorine and presents miniaturised experiments demonstrating some of the processes used in Industrial Inorganic Chemistry. Furthermore, experiments illustrating important concepts of Inorganic Chemistry such as Ion Bonding and Molecular Orbital Theory are describe.
Resumo:
Objetivando o desenvolvimento de novas metodologias de controle de fitonematóides, este trabalho buscou purificar as substâncias nematicidas produzidas por Cunninghamella elegans, Fusarium sp., Paecilomyces lilacinus eP. variotii. Esses fungos foram cultivados em meio líquido Czapek-Dox durante 15 dias, a 25 ºC, em agitador orbital. Em seguida, filtraram-se as misturas, o que permitiu a obtenção de soluções que foram concentradas sob vácuo e submetidas à purificação direcionada por testes in vitro com Meloidogyne incognita. Observou-se que os filtrados de P. lilacinus e P. variotii perdiam suas atividades nematicidas após a concentração sob vácuo, sugerindo que as substâncias ativas produzidas por esses fungos são consideravelmente voláteis. Para o filtrado de Fusarium sp., observou-se perda total da atividade contra M. incognita após fracionamento em coluna de sílica gel, indicando instabilidade da substância nematicida frente às condições empregadas.Do filtrado de C. elegans isolou-se uma substância que, em solução aquosa na concentração de 250 ppm, imobilizou 94% dos juvenis do segundo estádio de M. incognita expostos a tal solução durante 48 h.
Resumo:
Extinction coefficients (e) changes of manganese phthalocyanine (Mn-Pc) were studied in different organic solvents and related to solvent polarity scales; (Kosower's values (Z), Dimroth's values (E T), donor numbers (DN) and linear solvation energy relationships (LSER) or linear free energy relationships (LFER));, theoretical molecular orbital calculations and ligand/solvent coordination processes in order to predict molecular interaction with the medium and identification of predominant intermolecular forces.
Resumo:
E-Lychnophoric acid 1, its derivative ester 2 and alcohol 3 killed 100% of trypomastigote blood forms of Trypanosoma cruzi at the concentrations of 13.86, 5.68, and 6.48 µg/mL, respectively. Conformational distribution calculations (AM1) of 1, 2 and 3 gave minimum energies for the conformers a, b, c, and d, which differ from each other only in the cyclononene ring geometry. Calculations (DFT/BLYP/6-31G*) of geometry optimization and chemical properties were performed for conformers of 1, 2, and 3. The theoretical results were numerically compared to the trypanocidal activity. Calculated values of atomic charge, orbital population, and vibrational frequencies showed that the C-4-C-5 pi-endocyclic bond does not affect the trypanocidal activity of the studied compounds. Nevertheless, the structure of the group at C-4 strongly influences the activity. However, the theoretical results indicated that the intra-ring (C-1 and C-9) and pi-exocycle (C-8 and C-14) carbons of caryophyllene-type structures promote the trypanocidal activity of these compounds.
Resumo:
The structural and electronic properties of 1-(5-Hydroxymethyl - 4 -[ 5 - (5-oxo-5-piperidin- 1 -yl-penta- 1,3 -dienyl)-benzo [1,3] dioxol- 2 -yl]-tetrahydro -furan-2 -yl)-5-methy l-1Hpyrimidine-2,4dione (AHE) molecule have been investigated theoretically by performing density functional theory (DFT), and semi empirical molecular orbital calculations. The geometry of the molecule is optimized at the level of Austin Model 1 (AM1), and the electronic properties and relative energies of the molecules have been calculated by density functional theory in the ground state. The resultant dipole moment of the AHE molecule is about 2.6 and 2.3 Debyes by AM1 and DFT methods respectively, This property of AHE makes it an active molecule with its environment, that is AHE molecule may interacts with its environment strongly in solution.
Resumo:
As imagens de sensoriamento remoto orbital juntamente com as ferramentas em Sistemas de Informações Geográficas têm possibilitado diversos estudos sobre as alterações na cobertura das terras. O objetivo deste trabalho foi detalhar os resultados do mapeamento de uso e cobertura das terras e alterações em uma região no Nordeste do Estado de São Paulo entre 1988 e 2003, especificamente em relação à vegetação natural. A avaliação da dinâmica das áreas de remanescentes de vegetação natural das terras revelou retração de 0,14% em relação à área total dos municípios (51.649,5 km2). Mas houve avanço da vegetação ripária de 0,22% em relação à área total. Dos 125 municípios da região em estudo e possuidores de remanescentes de vegetação natural, 60,8% mantiveram praticamente a mesma porcentagem de cobertura vegetal natural (florestas estacionais, secundárias, cerrado e vegetação ripária) em 2003 com relação a 1988. Considerando somente as áreas com floresta estacional, secundária e cerrado, o número de municípios cresce para 79,2% do total. Os municípios que mantiveram os maiores percentuais de cobertura vegetal natural de Floresta Estacional, Floresta Secundária e Cerrado no período foram: Águas da Prata, com 39,9% de sua área municipal total, Rifaina (31,7%), São Sebastião da Grama (24,9%) e Pedregulho (24,0%). A ocupação das terras de 1988 a 2003 caracterizou-se pela dinâmica de substituição entre atividades que competem por área no setor rural, comum nas regiões administrativas tecnicamente mais avançadas do Estado de São Paulo.
Resumo:
O presente trabalho teve como proposta avaliar a identificação e o mapeamento das áreas de milho da região noroeste do Estado do Rio Grande do Sul a partir de dados multitemporais do sensor MODIS (Moderate Resolution Imaging Spectroradiometer) a bordo do satélite Earth Observing System - EOS-AM (Terra). O algoritmo de classificação supervisionada Spectral Angle Mapper (SAM) foi aplicado com sucesso em uma série multitemporal de imagens EVI pré-processadas. Verificou-se que as áreas classificadas como milho na imagem coincidiam plenamente com áreas mais extensas ou contínuas (> 90 ha) de milho. Áreas de menor extensão ou localizadas em encostas de morros, ao lado de vegetação arbórea, não foram detectadas pelo classificador devido à baixa resolução espacial das imagens. A maior utilidade prática da identificação e da classificação digital das áreas de milho obtidas das imagens MODIS está na sua aplicação para isolar ou complementar o mapeamento das áreas agrícolas visando ao seu monitoramento a partir de diferentes índices de vegetação, derivados de imagens de alta resolução temporal e baixa resolução espacial.
Resumo:
O uso de recursos de sensoriamento remoto orbital constitui um grande avanço no levantamento de dados sobre a cafeicultura, sobretudo por seu caráter temporal e baixo custo. Sendo assim, o objetivo do trabalho foi avaliar a utilização da imagem do satélite QUICKBIRD na determinação de parâmetros biofísicos importantes para a cultura cafeeira. Foram utilizados 25 talhões com plantios de café localizados entre os municípios de Ribeirão Corrente, Franca e Cristais Paulista (SP). Os parâmetros biofísicos utilizados foram os espaçamentos entre linhas e plantas, altura, IAF, diâmetro da copa, porcentagem de cobertura vegetal, rugosidade, variedade e biomassa. Foram utilizados valores de refletância real das bandas espectrais do satélite QUICKBIRD e os índices de vegetação NDVI, GVI, SAVI e RVI. A partir desses dados, foram feitas análises de regressão linear e não linear para a geração dos modelos de estimativa. A utilização de modelos de regressão baseados em equações não lineares mostrou-se mais adequado para determinar os parâmetros IAF e a porcentagem de biomassa, importantes como indicativos da produtividade da cultura cafeeira.
Resumo:
This study aimed at identifying different conditions of coffee plants after harvesting period, using data mining and spectral behavior profiles from Hyperion/EO1 sensor. The Hyperion image, with spatial resolution of 30 m, was acquired in August 28th, 2008, at the end of the coffee harvest season in the studied area. For pre-processing imaging, atmospheric and signal/noise effect corrections were carried out using Flaash and MNF (Minimum Noise Fraction Transform) algorithms, respectively. Spectral behavior profiles (38) of different coffee varieties were generated from 150 Hyperion bands. The spectral behavior profiles were analyzed by Expectation-Maximization (EM) algorithm considering 2; 3; 4 and 5 clusters. T-test with 5% of significance was used to verify the similarity among the wavelength cluster means. The results demonstrated that it is possible to separate five different clusters, which were comprised by different coffee crop conditions making possible to improve future intervention actions.