Citrus asymmetric somatic hybrids produced via fusion of gamma-irradiated and iodoacetamide-treated protoplasts

The objective of this study was to produce citrus somatic asymmetric hybrids by fusing gamma-irradiated protoplasts with iodoacetamide-treated protoplasts. Protoplasts were isolated from embryogenic suspension cells of grapefruit (Citrus paradisi Macfad.) cultivars Ruby Red and Flame, sweet oranges (C. sinensis Osbeck) 'Itaboraí', 'Natal', Valencia', and 'Succari', from 'Satsuma' (C. unshiu Marcow.) and 'Changsha' mandarin (C. reticulata Blanco) and 'Murcott' tangor (C. reticulata x C. sinensis). Donor protoplasts were exposed to gamma rays and receptor protoplasts were treated with 3 mmol L-1 iodoacetamide (IOA), and then they were fused for asymmetric hybridization. Asymmetric embryos were germinated, and the resulting shoots were either grafted onto sour orange, rough lemon or 'Swingle' (C. paradisi x Poncirus trifoliata) x 'Sunki' mandarin rootstock seedlings, or rooted after dipping their bases in indol-butyric acid (IBA) solution. The products were later acclimatized to greenhouse conditions. Ploidy was analyzed by flow cytometry, and hybridity was confirmed by amplified fragment length polymorphism (AFLP) analysis of plantlet DNAsamples. The best treatment was the donor-recipient fusion combination of 80 Gy-irradiated 'Ruby Red' protoplasts with 20 min IOA-treated 'Succari' protoplasts. Tetraploid and aneuploid plants were produced. Rooting recalcitrance was solved by dipping shoots' stems in 3,000 mg L-1 IBA solution for 10 min.

Propelente sólido compósito polibutadiênico: I- influência do agente de ligação

In the Brazilian Complete Spacial Mission, the research of Vehicle Satellite Launcher is important. The solid propellant composite used in this vehicle is made with ammonium perchlorate, aluminiun powder and hydroxy terminated polibutadiene resin. In the propellant the bonding agent has a function to promote the interaction between solids and polimeric matrix, improving mechanical properties as stress, strain, aging characteristics and moisture embrittlement. Due its importance in propellant, bonding agent is consider as industrial secret and the literature about it is generic, without greater informations.

Desafios da química analítica frente às necessidades da indústria farmacêutica

The development of liquid chromatography-mass spectrometric (LC-MS) techniques in the last few decades has made possible the analysis of trace amounts of analytes from complex matrices. With LC, the analytes of interest can be separated from each other as well as from the interfering matrix, after which they can be reliably identified thanks to the sensitivity and specificity of MS. LC-MS has become an irreplaceable tool for many applications, ranging from the analysis of proteins or pharmaceuticals in biological fluids to the analysis of toxic substances in environmental samples. In different segments of Brazilian Industry mass spectrometry has an important role, e.g. in the pharmaceutical industry in the development of generic formulations, contributing to the growth of Industry and social inclusion. However, the Brazilian chemists until this moment don't have an effective role in this new segment of the analytical chemistry in Brazil. The present paper shows the actual scenario for mass spectrometry in the pharmaceutical industry, emphasizing the need of a revision of graduation courses to attend the needs of this growing market.

Desafios da indústria farmacêutica brasileira

The paper traces a panorama of the development of new drugs and hopes to contribute for Brazil to become a player in the discovery of new drugs. Brazil is the sixth world market retail consumer of medicines prone to expansion, has a pharmaceutical industry focused on the production of generics and a very large number of undergraduate courses in Pharmacy. The national industry has grown over the last decade after the Generics Act 9787/99. Despite these positive aspects, a number of bottlenecks prevent Brazilian pharmaceutical industry to invest in the development of new drugs. There are, however, a number of initiatives to reduce the dependence on imported generic drugs. It is a very good start for the development of new pharmaceutical drugs.

Catálise assimétrica no Brasil: desenvolvimento e potencialidades para o avanço da indústria química brasileira

The preparation of enantiomerically pure or enriched substances is of fundamental importance to pharmaceutical, food, agrochemical, and cosmetics industries and involves a growing market of hundreds of billions of dollars. However, most chemical processes used for their production are not environmentally friendly because in most cases, stoichiometric amounts of chiral inductors are used and substantial waste is produced. In this context, asymmetric catalysis has emerged as an efficient tool for the synthesis of enantiomerically enriched compounds using chiral catalysts. More specifically, considering the current scenario in the Brazilian chemical industry, especially that of pharmaceuticals, the immediate prospect for the use of synthetic routes developed in Brazil in an enantioselective fashion or even the discovery of new drugs is practically null. Currently, the industrial production of drugs in Brazil is primarily focused on the production of generic drugs and is basically supported by imports of intermediates from China and India. In order to change this panorama and move forward toward the gradual incorporation of genuinely Brazilian synthetic routes, strong incentive policies, especially those related to continuous funding, will be needed. These incentives could be a breakthrough once we establish several research groups working in the area of organic synthesis and on the development and application of chiral organocatalysts and ligands in asymmetric catalysis, thus contributing to boost the development of the Brazilian chemical industry. Considering these circumstances, Brazil can benefit from this opportunity because we have a wide biodiversity and a large pool of natural resources that can be used as starting materials for the production of new chiral catalysts and are creating competence in asymmetric catalysis and related areas. This may decisively contribute to the growth of chemistry in our country.

Genetic diversity among isolates of stemphylium solani from cotton

The fungus Stemphylium solani causes leaf blight of tomato (Lycopersicon esculentum) in Brazil. In recent years, severe epidemics of a new leaf blight of cotton (Gossipium hyrsutum) caused by S. solani occurred in three major cotton-growing Brazilian states (PR, MT and GO). Molecular analysis was performed to assess the genetic diversity among the S. solani isolates from cotton, and to verify their relationship with representative S. solani isolates from tomato. Random amplified polymorphic DNA (RAPD) markers and internal transcribed spacers of ribosomal DNA (rDNA) were used to compare 33 monosporic isolates of S. solani (28 from cotton and five from tomato). An isolate of Alternaria macrospora from cotton was also used for comparison. RAPD analysis showed the presence of polymorphism between the genera and the species. The A. macrospora and the S. solani isolates from cotton and tomato were distinct from each other, and fell into separate groups. Variation by geographic region was observed for the tomato isolates but not for the cotton isolates. Amplifications of the ITS region using the primer pair ITS4/ITS5 resulted in a single PCR product of approximately 600 bp for all the isolates. Similarly, when amplified fragments were digested with eight restriction enzymes, identical banding patterns were observed for all the isolates. Hence, rDNA analysis revealed no inter-generic or intra-specific variation. The genetic difference observed between the cotton and the tomato isolates provides evidence that S. solani attacking cotton in Brazil belongs to a distinct genotype.

Hydrozoa e Scyphozoa existentes no instituto paulista de oceanografia

Continuing the inventory of the Coelenterate Fauna of the Brazilian coast, 23 species of Hydrozoa and a Scyphomedusa are recorded from different points of the coast aproximately between 22º and 24º lat. S. Of these, 14 species were already known from other points of the coast and the remaining 10 were unknown from this latitude. Two species are here listed as new, they are: Halocordyle fragHis and Calicella gabriellae. 1. - Halocordyle fragilis, Stechow's (1923) correction of the generic name Pennaria has been followed, shows remarkable distinctive specific characters such as: alternate distribution of the cladii which do not lie all in the same plane, they are inserted at random on the hydrocaulus with a tendency towards a spiral dexiotropic distribution, sparse distribution of the pedicels which are alternate and not all located on the same side of the hydrocladium, and, finally, the long, wiry aspect of the colony which is as brittle as light glass. This characteristics are not sufficient, to my belief, to establish a new genus, since the polyps and the gonophores are entirely of the Halocordyle type, but they confer upon the species a very peculiar habitus. 2. - Calicella gabriellae forms erect hydrocauli which are extremely soft and flexuose, with hydrothecate and intermediate internodes. The thecae are deep, cylindrical, with a conical base, there are 10-12 long and narrow opercular valves. The gonangia are small, conical, with a short distal digitiform process. The included sporosac exhibits maturing ova. Dynamena heteroclonta described by Jarvis (1922) as a new species, is here considered as a new form of the very variable species Dynamena quadridentata. Schizotricha billardi nom. nov., is specifically separated from Sch. diaphana (Heller) to which it had been identified up to know. The Brazilian colonies agree with the French Somaliland specimens described by Billard (1904) and they are reunited in a new species named after the French worker. The main difference, between the two mentioned species are: shape and size of the gonothecae, of the thecae and of the nematophores. A description is given of all the species not previously recorded from the Brazilian coast as well as biological observations on Olindias sambaquiensis whose shoals during winter months are very large and may entangle partially the fishermen's nets. Its feeding and swimming habits are described and the species proves to be an excellent laboratory animal both for class and research purposes, for it easily endures long transportation (even up to 12 hours during summer months) as well as unoxygenized acquaria and nevertheless greadily feeds on any animal food.

ABOVEGROUND AND BELOWGROUND BIOMASS AND CARBON ESTIMATES FOR CLONAL EUCALYPTUS TREES IN SOUTHEAST BRAZIL

Eucalyptus plantations represent a short term and cost efficient alternative for sequestrating carbon dioxide from the atmosphere. Despite the known potential of forest plantations of fast growing species to store carbon in the biomass, there are relatively few studies including precise estimates of the amount of carbon in these plantations. In this study it was determined the carbon content in the stems, branches, leaves and roots of a clonal Eucalyptus grandis plantation in the Southeast of Brazil. We developed allometric equations to estimate the total amount of carbon and total biomass, and produced an estimate of the carbon stock in the stand level. Altogether, 23 sample trees were selected for aboveground biomass assessment. The roots of 9 of the 23 sampled trees were partially excavated to assess the belowground biomass at a singletree level. Two models with DBH, H and DBH2H were tested. The average relative share of carbon content in the stem, branch, leaf and root compartments was 44.6%, 43.0%, 46.1% and 37.8%, respectively, which is smaller than the generic value commonly used (50%). The best-fit allometric equations to estimate the total amount of carbon and total biomass had DBH2H as independent variable. The root-to-shoot ratio was relatively stable (C.V. = 27.5%) probably because the sub-sample was composed of clones. Total stand carbon stock in the Eucalyptus plantation was estimated to be 73.38 MgC ha-1, which is within the carbon stock range for Eucalyptus plantations.

Identification of the recently described new type of bovine papillomavirus (BPV-8) in a Brazilian beef cattle herd

Bovine papillomavirus type 8 (BPV-8) was first detected and described in teat warts as well as in healthy teat skin from cattle raised in Japan. The entire viral genome was sequenced in 2007. Additionally, a variant of BPV-8, BPV-8-EB, was also identified from papillomatous lesions of a European bison in Slovakia. In Brazil, despite the relatively common occurrence of BPV infections, the identification and determination of viral types present in cattle is still sporadic. The aim of this study is to report the occurrence of the recently described BPV-8 in Brazil. The virus was identified in a skin warts obtained from a beef cattle herd located in Parana state, southern Brazil. The papilloma had a macular, non-verrucous gross aspect and was located on the dorsal thorax of a cow. Polymerase chain reaction (PCR) was performed using generic primers for partial amplification of L1 gene. The obtained amplicon (480bp) was cloned and two selected clones were sequenced. The nucleotide sequence was compared to existing papillomaviral genomic sequences, identifying the virus as BPV type 8. This study represents the first report of BPV-8 occurrence in Brazil, what suggests its presence among Brazilian cattle.

Evaluation of a PCR multiplex for detection and differentiation of Mycoplasma synoviae, M. gallisepticum, and M. gallisepticum strain F-vaccine

Mycoplasma gallisepticum (MG) and Mycoplasma synoviae (MS) are the mycoplasma infections of most concern for commercial poultry industry. MG infection is commonly designated as chronic respiratory disease (CRD) of chickens and infections sinusitis of turkeys. MS causes sub clinical upper respiratory infection and tenosynovitis or bursitis in chickens and turkeys. The multiplex PCR was standardized to detect simultaneously the MS, MG field strains and MG F-vaccine strain specific. The generic PCR for detection of any species of Mollicutes Class was performed and compared to the multiplex PCR and to PCR using species-specific primers. A total of 129 avian tracheal swabs were collected from broiler-breeders, layer hens and broilers in seven different farms and were examined by multiplex PCR methods. The system (multiplex PCR) demonstrated to be very rapid, sensitive, and specific. Therefore, the results showed a high prevalence of MS in the flocks examined (27.9%), and indicate that the MS is a recurrent pathogen in Brazilian commercial poultry flocks.

Proposal of methodology for the modeling and control of manipulators

Industrial applications demand that robots operate in agreement with the position and orientation of their end effector. It is necessary to solve the kinematics inverse problem. This allows the displacement of the joints of the manipulator to be determined, to accomplish a given objective. Complete studies of dynamical control of joint robotics are also necessary. Initially, this article focuses on the implementation of numerical algorithms for the solution of the kinematics inverse problem and the modeling and simulation of dynamic systems. This is done using real time implementation. The modeling and simulation of dynamic systems are performed emphasizing off-line programming. In sequence, a complete study of the control strategies is carried out through the study of several elements of a robotic joint, such as: DC motor, inertia, and gearbox. Finally a trajectory generator, used as input for a generic group of joints, is developed and a proposal of the controller's implementation of joints, using EPLD development system, is presented.

SEED MORPHOLOGY IN OnobrychisMILLERSECTION HYMENOBRYCHIS DC. FROM TURKEY

ABSTRACT The seed (nutlet) morphology of four Onobrychis Miller (Fabaceae: subfamily Papilionoideae, Section Hymenobrychis DC.) taxa from Turkey, including three endemic taxa, was examined using scanning electron microscopy. Onobrychis tournefortii, O. galegifolia, O. cappadocica, O. albiflora. The seed examined exhibited variation in size, shape, colour, and surface sculpturing. Seed size ranged between 4.0-5.2 mm length and 2.0-3.6 mm width. Observed shapes included; ellipticus anguste asymmtricus reniformis, Ovatus anguste asymmetricus reniformis and ellipticus reniformis. Seed surface sculpturing revealed two distinct types: reticulate and rugulate. Species of Onobrychisare generally similar and confused with those of Hedysarumduring the identification process. Seed surface micromorphology can suggest taxonomical diagnostic characters for distinguishing species. Many of these characteristics are diagnostic at both the generic and specific levels.

Morphometric analysis of the Brasiliorchis picta complex (Orchidaceae)

One of the largest genera of Orchidaceae in the Neotropics with about 450 species, Maxillaria presents several taxonomic uncertainties about its generic circumscription and the delimitation of species groups, mainly due to the large variability of some species. The present study aims at verifying the morphological variation and species delimitation in the Brasiliorchis picta complex, a recent new genus derived from Maxillaria, using morphometric multivariate analysis. A total of 340 specimens belonging to six species (B. chrysantha (Barb. Rodr.) R.B. Singer, S. Koehler & Carnevali, B. gracilis (Lodd.) R.B. Singer, S. Koehler & Carnevali, B. marginata (Lindl.) R.B. Singer, S. Koehler & Carnevali, B. picta (Hook.) R. Singer, S. Koehler & Carnevali, B. porphyrostele (Rchb. f.) R.B. Singer, S. Koehler & Carnevali and B. ubatubana (Hoehne) R.B. Singer, S. Koehler & Carnevali) were analyzed using multivariate methods (PCA, CVA, DA, and Cluster Analysis with UPGMA). B. gracilis shows the largest morphological discontinuity, mainly due to its smaller size. The other species tend to form distinct groups, but intermediate characteristics between pairs of species induce overlaps among the individuals of different species and thus confuse the distinction of each one. Hybridization and geographic distribution can be involved in the differentiation of the species and lineages in this complex. Because the species classified a priori in this work cannot be recognized by the quantitative characters measured here, such other tools as geometric morphometry and molecular data should be employed in future works to clarify species relationships in this complex.

Molecular systematics of Thorea (Rhodophyta, Thoreales) species in Brazil

This study aimed to evaluate species level taxonomy and phylogenetic relationship among Thorea species in Brazil and other regions of the world using two molecular markers - RUBISCO large subunit plastid gene (rbcL) and nuclear small-subunit ribosomal DNA (SSU rDNA). Three samples of Thorea from Brazil (states of Mato Grosso do Sul and São Paulo) and one sample from Dominican Republic (DR) were sequenced. Analyses based on partial sequences of rbcL (1,282 bp) and complete sequences of SSU (1,752 bp) were essentially congruent and revealed that Thoreales formed a distinct monophyletic clade, which had two major branches with high support, representing the genera Thorea and Nemalionopsis. Thorea clade had four main branches with high support for all analyses, each one representing the species: 1) T. gaudichaudii C. Agardh from Asia (Japan and Philippines) - this clade occurred only in the rbcL analyses; 2) T. violacea Bory from Asia (Japan) and North America (U.S.A. and DR); 3) T. hispida (Thore) Desvaux from Europe (England) and Asia (Japan); 4) a distinct group with the three Brazilian samples (sequence identity: rbcL 97.2%, 1,246 bp; SSU 96.0-98.1%, 1,699-1,720 bp). The Brazilian samples clearly formed a monophyletic clade based on both molecular markers and was interpreted as a separate species, for which we resurrected the name T. bachmannii Pujals. Morphological and molecular evidences indicate that the Thoreales is well-resolved at ordinal and generic levels. In contrast, Thorea species recognized by molecular data require additional characters (e.g. reproductive and chromosome numbers) to allow consistent and reliable taxonomic circumscription aiming at a world revision based on molecular and morphological evidences.

Ecological distribution of stream macroalgae in different spatial scales using taxonomic and morphological groups

We examined the ecological distribution of macroalgal communities in streams using species groups (taxonomic units = algal phyla, and morphological = morphological types) with similar structures and functions instead of the species themselves. The study was conducted from June to July/2007 in two drainage basins located in mid-southern region of Paraná State , Brazil. Evaluations of macroalgal communities took into consideration the following spatial scales: the drainage basin (the Pedras river and Marrecas river basins), shading regime (open and shaded stream segments), mesohabitats (riffles and pools), and microhabitats (sampling units of 0.05m2). A total of 29 taxa (23 subgeneric, one generic, and five vegetative groups) were identified. On these, 12 taxa belong to Chlorophyta, 11 to Cyanobacteria, four to Heterokontophyta, and two to Rhodophyta. The proportions of morphological types were: 24% free filaments, 17.25% mats, tufts, gelatinous colonies, and gelatinous filaments, 7% crusts. In terms of spatial scales, we observed a predominance of Chlorophyta in open stream segments and Cyanobacteria in shaded stream segments, reflecting the loss of competitive advantage of green algae in sites with low energy availability. In the mesohabitats, the morphological types recorded in pools were predominantly poorly adapted to fast currents (free filaments), while those found in riffles (mats, tufts and gelatinous filaments) were highly resistant to fast water flows. As such, the use of species groupings based on algal taxonomy associated with morphological characteristics proved to be useful to understanding the distributions of these organisms in lotic environments.