Nível crítico de fósforo no solo paraPanicum maximum Jacq. cv. Tanzânia

Foram avaliados os efeitos da aplicação de fósforo (P) em solo argiloso, de textura média e arenoso, sobre a produção de matéria seca de Panicum maximum Jacq. cv. Tanzânia. O ensaio foi conduzido em casa de vegetação, em vasos de plástico contendo 10 dm³ de solo, em esquema fatorial e delineamento inteiramente ao acaso. Após calagem para V = 70% e aplicação de 0, 35, 70, 105 e 140 mg/dm³ de P, o solo foi umedecido, e depois de 30 dias, secado e amostrado. O ensaio foi conduzido por 76 dias, a partir da emergência das plântulas, com o primeiro corte aos 48 dias, a 10 cm do solo, e o segundo, aos 76,rente ao solo. Com a aplicação de P houve aumento de produção de matéria seca, e o maior acréscimo ocorreu com a aplicação de 35 mg/dm³. A maior produção foi obtida no solo de textura média. O teor de P nas plantas estava adequado nos solos arenoso e argiloso. No de textura média, ele diminuiu com o aumento da produção,caracterizando efeito de diluição. Com aprodução relativa e o teor de P de cada solo, foi determinado o nível crítico de 38 mg/dm³ de P extraído por resina.

Estimating soybean crop areas using spectral-temporal surfaces derived from MODIS images in Mato Grosso, Brazil

The objective of this work was to evaluate the application of the spectral-temporal response surface (STRS) classification method on Moderate Resolution Imaging Spectroradiometer (MODIS, 250 m) sensor images in order to estimate soybean areas in Mato Grosso state, Brazil. The classification was carried out using the maximum likelihood algorithm (MLA) adapted to the STRS method. Thirty segments of 30x30 km were chosen along the main agricultural regions of Mato Grosso state, using data from the summer season of 2005/2006 (from October to March), and were mapped based on fieldwork data, TM/Landsat-5 and CCD/CBERS-2 images. Five thematic classes were considered: Soybean, Forest, Cerrado, Pasture and Bare Soil. The classification by the STRS method was done over an area intersected with a subset of 30x30-km segments. In regions with soybean predominance, STRS classification overestimated in 21.31% of the reference values. In regions where soybean fields were less prevalent, the classifier overestimated 132.37% in the acreage of the reference. The overall classification accuracy was 80%. MODIS sensor images and the STRS algorithm showed to be promising for the classification of soybean areas in regions with the predominance of large farms. However, the results for fragmented areas and smaller farms were less efficient, overestimating soybean areas.

Quantitative genetic analysis of methylxanthines and phenolic compounds in mate progenies

The objective of this work was to determine the contents of methylxanthines, caffeine and theobromine, and phenolic compounds, chlorogenic and caffeic acids, in 51 mate progenies (half-sib families) and estimate the heritability of genetic parameters. Mate progenies were from five Brazilian municipalities: Pinhão, Ivaí, Barão de Cotegipe, Quedas do Iguaçu, and Cascavel. The progenies were grown in the Ivaí locality. The contents of the compounds were obtained by high performance liquid chromatography (HPLC). The estimation of genetic parameters by the restricted maximum likelihood (REML) and the prediction of genotypic values via best linear unbiased prediction (BLUP) were obtained by the Selegen - REML/BLUP software. Caffeine (0.248-1.663%) and theobromine (0.106-0.807%) contents were significantly different (p<0.05) depending on the region of origin, with high individual heritability (ĥ²>0.5). The two different progeny groups determined for chlorogenic (1.365-2.281%) and caffeic (0.027-0.037%) acid contents were not significantly different (p<0.05) depending on the locality of origin. Individual heritability values were low to medium for chlorogenic (ĥ²<0.4) and caffeic acid (ĥ²<0.3). The content of the compounds and the values of genetic parameters could support breeding programs for mate.

Características anatômicas e morfofisiológicas de lâminas foliares de genótipos de Panicum maximum

O objetivo deste trabalho foi avaliar as características anatômicas e morfofisiológicas de lâminas foliares de genótipos de Panicum maximum e determinar quais as mais relevantes para a discriminação precoce do valor nutritivo de genótipos promissores. O experimento foi realizado entre janeiro de 2006 e novembro de 2007, em Dourados, MS. Foram avaliados 23 genótipos de P. maximum pré-selecionados do programa de melhoramento da Embrapa Gado de Corte. Utilizou-se o delineamento experimental de blocos ao acaso, com três repetições. Foram avaliadas 27 características anatômicas e morfofisiológicas de lâminas foliares em cada genótipo. Para cada característica estudada, os resultados foram agrupados pelo teste de Scott-Knott. A importância relativa das características avaliadas para a avaliação da divergência genética foi determinada pelo método de Singh. As características que melhor discriminaram os genótipos foram as proporções - na seção transversal das lâminas - das epidermes adaxial, abaxial, adaxial + abaxial, do mesofilo e do tecido vascular + esclerênquima. A área foliar específica, a área foliar e o comprimento de lâmina foram as características morfofisiológicas que mais contribuíram para a discriminação dos genótipos; porém, sua importância relativa foi muito menor que a das características anatômicas. A proporção ocupada pela bainha parenquimática dos feixes e a largura das lâminas apresentam instabilidade fenotípica.

Detection and mapping of a lethal locus in a eucalyptus hybrid population

The objective of this work was to verify the existence of a lethal locus in a eucalyptus hybrid population, and to quantify the segregation distortion in the linkage group 3 of the Eucalyptus genome. A E. grandis x E. urophylla hybrid population, which segregates for rust resistance, was genotyped with 19 microsatellite markers belonging to linkage group 3 of the Eucalyptus genome. To quantify the segregation distortion, maximum likelihood (ML) models, specific to outbreeding populations, were used. These models consider the observed marker genotypes and the lethal locus viability as parameters. The ML solutions were obtained using the expectation‑maximization algorithm. A lethal locus in the linkage group 3 was verified and mapped, with high confidence, between the microssatellites EMBRA 189 e EMBRA 122. This lethal locus causes an intense gametic selection from the male side. Its map position is 25 cM from the locus which controls the rust resistance in this population.

Land use/cover classification in the Brazilian Amazon using satellite images

Land use/cover classification is one of the most important applications in remote sensing. However, mapping accurate land use/cover spatial distribution is a challenge, particularly in moist tropical regions, due to the complex biophysical environment and limitations of remote sensing data per se. This paper reviews experiments related to land use/cover classification in the Brazilian Amazon for a decade. Through comprehensive analysis of the classification results, it is concluded that spatial information inherent in remote sensing data plays an essential role in improving land use/cover classification. Incorporation of suitable textural images into multispectral bands and use of segmentation‑based method are valuable ways to improve land use/cover classification, especially for high spatial resolution images. Data fusion of multi‑resolution images within optical sensor data is vital for visual interpretation, but may not improve classification performance. In contrast, integration of optical and radar data did improve classification performance when the proper data fusion method was used. Among the classification algorithms available, the maximum likelihood classifier is still an important method for providing reasonably good accuracy, but nonparametric algorithms, such as classification tree analysis, have the potential to provide better results. However, they often require more time to achieve parametric optimization. Proper use of hierarchical‑based methods is fundamental for developing accurate land use/cover classification, mainly from historical remotely sensed data.

Parentesco na seleção para produtividade e teores de óleo e proteína em soja via modelos mistos

O objetivo deste trabalho foi avaliar influência da informação de parentesco na seleção de progênies de soja quanto à produtividade e aos teores de óleo e proteína, com base no uso de modelos mistos de predição dos valores genéticos. Novecentas progênies F4:6 e 200 progênies F4:7 de soja foram avaliadas nas safras 2010/2011 e 2011/2012, respectivamente. As progênies foram obtidas de cruzamentos múltiplos a partir de 57 progenitores. Os dados foram analisados por meio de modelos aleatórios (quadrados mínimos) e mistos BLUP/REML ("best linear unbiased prediction/restricted maximum likelihood"). Os maiores valores de ganhos preditos foram obtidos com o BLUP/REML. Os valores genéticos preditos com o método BLUP/REML, sem informação de parentesco, apresentaram alta correlação com aqueles obtidos com o modelo aleatório, além de detectada alta coincidência das progênies selecionadas. A inclusão da matriz de parentesco resultou na seleção de progênies diferentes e em maior acurácia na predição dos valores genéticos.

Estimação de parâmetros genéticos e predição de valor genético aditivo de trigo utilizando modelos mistos

O objetivo deste trabalho foi estimar os parâmetros genéticos e predizer o valor genético de populações e indivíduos oriundos de populações segregantes de trigo, com o uso da metodologia de modelos mistos ("restricted maximum likelihood"/"best linear unbiased prediction", REML/BLUP). Trinta e seis populações segregantes de trigo e quatro controles foram avaliados na geração F3, em delineamento de blocos ao acaso, com informações de indivíduo retiradas de dentro das parcelas. Os caracteres avaliados foram: produção de grãos, índice de colheita, número de perfilhos e altura de planta. Observou-se a existência de variabilidade genética entre populações em todos os caracteres avaliados. A herdabilidade média variou de 39,15 a 92,78%, e a acurácia, de 62,57 a 96,32%, na seleção de populações. A herdabilidade individual no sentido restrito foi baixa dentro das populações, em todos os caracteres. A acurácia na seleção individual apresentou magnitude média, quanto ao caráter altura de plantas, e baixa quanto aos demais caracteres. A herdabilidade individual contribui para maior ganho nos caracteres altura de planta e índice de colheita com o uso do BLUP individual, em comparação ao BLUP de populações. As populações segregantes Embrapa22/BRS207, Embrapa22/VI98053, Embrapa22/IVI01041, BRS254/BRS207, BRS254/VI98053, BRS254/UFVT1Pioneiro e BRS264/BRS207 destacam-se por apresentar valor genético aditivo elevado em dois ou mais caracteres.

Pseudo-aneurismas: relato de dois casos e revisão da literatura

Pseudo-aneurismas são uma afecção arterial rara. Os autores destacam a raridade da ocorrência de pseudo-aneurisma da artéria carótida comum pós-traumático e a associação de pseudo-aneurisma com osteocondroma femoral. Enfatizam a importância dos métodos por imagem, em especial a angiotomografia, no diagnóstico de afecções vasculares, como na ocorrência de pseudo-aneurismas. Realizam, ainda, revisão bibliográfica pertinente ao assunto.

Síntese de aminoglicosídeos, precursores de pseudo-dissacarídeos potencialmente ativos

This work describes the syntheses of O-protected aminoglycosides as an important block building for the preparation of potential bioactive pseudodisaccharide. The new O-protected methyl 3-amino-3-deoxy-alpha-D-glycopyranoside 4 and methyl 2-amino-2-deoxy-alpha-D-glycopyranoside 5 were prepared, respectively, in five and four steps. All compounds were obtained in good yield and characterized by spectral data (¹H and 13C NMR, MS, IR) and elemental analysis.

Factors affecting Hg (II) adsorption in soils from the Rio Negro basin (Amazon)

Mercury (II) adsorption studies in top soils (top 10 cm) from the Rio Negro basin show this process depends strongly on some selected parameters of the aqueous phase in contact with the soils. Maximum adsorption occurred in the pH range 3.0-5.0 (>90%). Dissolved organic matter shows an inhibitory effect on the availability of Hg (II) to be adsorbed by the soils, whereas a higher chloride content of the solution resulted in a lower adsorption of Hg (II) at pH 5.0. Soils with higher organic matter content were less affected by changes in the salinity. An increase in the initial Hg (II) concentration increased the amount of Hg (II) adsorbed by the soil and decreased the time needed to reach equilibrium. A Freundlich isotherm provided a good model for Hg (II) adsorption in the two types of soil studied. The kinetics of Hg (II) adsorption on Amazonian soils showed to be very fast and followed pseudo-second order kinetics. An environmental implication of these results is discussed under the real scenario present in the Negro River basin, where acidic waters are in contact with a soil naturally rich in mercury.

Adsorção de arsênio(V) pela quitosana ferro - III reticulada

The removal of As(V) by a crosslinked iron(III)-chitosan adsorbent was evaluated under various conditions. The adsorption capacity of CH-FeCL was around 54 mg/g of As(V). The kinetics of adsorption obeys a pseudo-first-order model with rate constants equal to 0.022, 0.028, and 0.033 min-1 at 15, 25 and 35 ºC respectively. Adsorption data were well described by the Langmuir model, although they could be modeled also by the Langmuir-Freundlich equation. The maximum adsorption capacity, calculated with the Langmuir model, was 127 mg g-1 of As(V). The inhibition by competing anions is dependant on their kind and valence.

Microencapsulação do agente quelante sulfoxina em microesferas de quitosana preparadas por spray drying como novo adsorvente para íons metálicos

In this work, a new adsorbent was prepared by microencapsulation of sulfoxine into chitosan microspheres by the spray drying technique. The new adsorbent was characterized by Raman spectroscopy, scanning electron microscopy and microanalysis of energy dispersive X-rays. The Cu(II) adsorption was studied as a function of pH, time and concentration. The optimum pH was found to be 6.0. The kinetic and equilibrium data showed that the adsorption process followed the pseudo second-order kinetic model and the Langmuir isotherm model over the entire concentration range. An increase of 8.0% in the maximum adsorption capacity of the adsorbent (53.8 mg g-1) was observed as compared to chitosan glutaraldehyde cross-linked microspheres.

Remoção de metais de solução aquosa usando bagaço de caju

The metal ions removal on cashew bagasse, a low-cost material, has been studied by batch adsorption. The parameters chemical treatment, particle size, biosorbent concentration, and initial pH were studied. In this study the maximum ions removal was obtained on the cashew bagasse treated with 0.1 mol/L NaOH/3 h, at optimum particle size (20-59 mesh), biosorbent concentration (50 g/L) and initial solution pH 5. The kinetic study indicated that the adsorption metal follows pseudo-second order model for a multielementary system and equilibrium time was achieved in 60 min for all metal ions.

Oxocarbonos, pseudo-oxocarbonos e esquaraínas

Oxocarbons ions are cyclic compounds presenting unusual electronic and vibrational properties. These molecules anions possess a high symmetry and degree of electronic delocalization, characteristics that have been discussed in several structural and spectroscopic investigations. Compounds in which one or more of the carbonyl oxygen atoms are replaced by other atoms or groups are called pseudo-oxocarbons. Compounds formed by substitution of the carbonyl groups by nitrogen groups former a new class named squaraines. Specificity the dicyanomethylene groups are interesting because of the possibility of further extension of the electronic delocalization and a new coordination site. These molecules also present interesting coordination properties which make these systems potentially useful in crystal engineering research.