Cyanogenesis and the onset of tapping panel dryness in rubber tree

The objective of this work was to study the influence of cyanogenesis on the onset of irreversible tapping panel dryness (TPD) and the physiological and histological aspects of secondary phloem in the trunk (tapping panel) of rubber trees (Hevea spp.). Two cyanogenic compounds, linamarin and KCN, were applied separately on the trunk bark of healthy mature trees belonging to two Brazilian clones (Fx 4098 and Fx 3899). Changes in histology, latex pressure potential (ΨP) and cyanogenic potential (HCNp) were followed in the trunk inner barks. In addition, the HCNp levels were determined in TPD-affected plants of both clones. The applications of linamarin or KCN in healthy plants decreased latex ΨP, and formed tylosoids associated with in situ coagulation of latex. The clone Fx 4098 had the higher HCNp and showed the quicker and stronger responses to the cyanogenic compounds. Plants with TPD syntoms had a higher HCNp than the untreated healthy ones. Since histological changes are also structural markers of early TPD, it can be inferred that excessive release of cyanide can induce it in sensitive rubber clones

Prohexadione calcium on the growth and quality of eggplant seedlings

Abstract:The objective of this work was to evaluate the effects of prohexadione calcium concentrations on the growth and quality of eggplant (Solanum melongena) seedlings. The effects of prohexadione calcium concentrations of 0, 50, 100, or 150 mg L-1 on seedling growth parameters were evaluated in a greenhouse experiment. After the greenhouse experiment, the seedlings were transplanted to the field. During the field experiment, the number of days to flowering, plant height, number of fruits per plant, average fruit weight and yield were evaluated. Both experiments were carried out in a completely randomized design with four replicates. All prohexadione calcium concentrations significantly reduced shoot height and internode length, when compared to the control. The concentrations of 50, 100, and 150 mg L-1 prohexadione calcium reduced shoot height by 27, 32, and 38%, respectively. Prohexadione calcium treatments (except the one with 50 mg L-1) enhanced relative chlorophyll content of leaves in comparison to the control. There were no delays in flowering and no significant differences in number of fruits per plant among treatments with prohexadione calcium. The concentrations of 100 and 150 mg L-1 prohexadione calcium significantly reduced yield per plant and total fruit yield, whereas the concentration of 50 mg L-1 did not cause any change in yield compared to the control. The lowest prohexadione calcium concentration can be used to control excessive elongation of eggplant seedlings without yield loss.

THE ROLE OF MINERAL NUTRITION ON YIELDS AND FRUIT QUALITY IN GRAPEVINE, PEAR AND APPLE

ABSTRACT Fertilization of temperate fruit trees, such as grapevine ( Vitis spp.), apple ( Malus domestica), and pear ( Pyrus communis) is an important tool to achive maximum yield and fruit quality. Fertilizers are provided when soil fertility does not allow trees to express their genetic potential, and time and rate of application should be scheduled to promote fruit quality. Grapevine berries, must and wine quality are affected principally by N, that regulate the synthesis of some important compounds, such as anthocyanins, which are responsible for coloring of the must and the wine. Fermenation of the must may stop in grapes with low concentration of N because N is requested in high amount by yeasts. An N excess may increase the pulp to peel ratio, diluting the concentration of anthocyanins and promoting the migration of anthocyanins from berries to the growing plant organs; a decrease of grape juice soluble solid concentration is also expected because of an increase in vegetative growth. Potassium is also important for wine quality contributing to adequate berry maturation, concentration of sugars, synthesis of phenols and the regulation of pH and acidity. In apple and pear, Ca and K are important for fruit quality and storage. Potassium is the most important component of fruit, however, any excess should be avoided and an adequate K:Ca balance should be achieved. Adequate concentration of Ca in the fruit prevents pre- and post-harvest fruit disorders and, at the same time, increases tolerance to pathogens. Although N promotes adequate growth soil N availability should be monitored to avoid excessive N uptake that may decrease fruit skin color and storability.

Construção de uma cela de fluxo para medidas por espectrofotometria em fase sólida

A simple and low cost flow cell is proposed for measurements by solid-phase spectrophotometry employing a conventional spectrophotometer. The flow cell geometry allows the employment of a large amount of the solid support without causing both excessive attenuation of the radiation beam and increasing of the back-pressure. The adaptation of the flow cell in the optical path of the spectrophotometer in order to increase the precision is discussed. The flow cell characteristics were demonstrated by measurements of Co(II), employing 1-(2-tiazolylazo)-2-naphthol (TAN) immobilized on C18 bonded silica as solid support. The apparent molar absorptivity and coefficient of variation were estimated as 1.86 x 10(5) L mol-1 cm-1 and 1.4 % (n=15). A sample throughput of 40 determinations per hour and a detection limit of 15 mug L-1 (99.7 % confidence level) were achieved.

A proposta curricular de química do Estado de Minas Gerais: fundamentos e pressupostos

This article presents the basic ideas that oriented the elaboration of the new Chemistry Curriculum for the High Schools in the State of Minas Gerais, Brazil. The main features of traditional Brazilian Chemistry Curriculum are critically discussed, namely, the excessive number of concepts, the overemphasis in procedures and rituals instead of chemical principles and the lack of relationship between the concepts and the social, technological and environmental contexts. Trying to overcome these features, the proposed curriculum deals with a fewer number of concepts, clearly related in a conceptual structure, opening space to a balanced emphasis on phenomena, theory and representation, and on conceptual and contextual aspects of chemical knowledge.

Moisture sorption isotherms and isosteric heat determination in Chilean papaya (Vasconcellea pubescens)

The moisture sorption isotherms of Chilean papaya were determined at 5, 20, and 45 ºC, over a relative humidity range of 10-95%. The GAB, BET, Oswin, Halsey, Henderson, Smith, Caurie and Iglesias-Chirife models were applied to the sorption experimental data. The goodness of fit of the mathematical models was statistically evaluated by means of the determination coefficient, mean relative percentage deviation, sum square error, root-mean-square error, and chi-square values. The GAB, Oswin and Halsey models were found to be the most suitable for the description of the sorption data. The sorption heats calculated using the Clausius-Clapeyron equation were 57.35 and 59.98 kJ·mol-1, for adsorption and desorption isotherms, respectively.

Efeito de substâncias empregadas para remoção de cobre sobre o teor de compostos secundários da cachaça

High copper content is of great concern among producers of sugar-cane spirits who frequently use filters instead of cleaning the stills. This study compared the efficiency of activated carbon, ion-exchange-polymeric resin, and activated-carbon/iron-oxide magnetic composite for copper reduction without removing excessive organic compounds that are important for the beverage's quality. Resin was the most efficient copper adsorbent, removing fewer organic compounds. The composite also removed copper; however, it also removed large amounts of organic compounds. Activated carbon didn't remove sufficient copper to reduce its concentration to less than 5 g L-1, and it removed large amounts of higher alcohols and esters.

Interesterificação química de óleo de soja e óleo de soja totalmente hidrogenado: influência do tempo de reação

Chemical interesterification is an important alternative to produce zero trans fats. In practice, however, excessive reaction times are used to ensure complete randomization. This work evaluated the influence of the reaction time on the interesterification of soybean oil/fully hydrogenated soybean oil blend, carried out in the following conditions: 100 ºC, 500 rpm stirring speed, 0.4% (w/w) sodium methoxide catalyst. The triacylglycerol composition, solid fat content and melting point analysis showed that the reaction was very fast, reaching the equilibrium within 5 min. This result suggests the interesterification can be performed in substantially lower times, with reduction in process costs.

Avaliação da contaminação de metais em sedimentos superficiais das praias do lago de Itaipu

This work was performed to evaluate the distribution of metals Al, Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn in the sediment surface in the Itaipu Lake-PR-Brazil. It was also performed to measurement the pH, phosphorus, organic carbon and particle size. In accordance of international criteria of quality of sediment, the results indicate an anthropogenic collaborations since some metals reached an excessive values. The factor of contamination was also used to evaluate the levels of contamination. The levels of Cu and Pb indicate a moderate contamination, so that it's possible to do harm to the balance of the ecosystem studied.

Experimental determination of benzene uptake rate in Tenax TA diffusive samplers

This paper proposes a methodology to predict benzene uptake rate in ambient air, using passive samplers with Tenax TA. Variations in the uptake rate were found to occur as a function of the sampling time; and were greater at the beginning of sampling. An empirical model was obtained and values for uptake rate agree with literature. Concentration prediction errors can be minimized by using sampling times of 4 to 14 days, thus avoiding the influence of excessive uptake rates in the initial days and the influence of back diffusion at the end of the sampling period.

Dft theoretical study of energetic nitrogen-rich C4N6H8-n(NO2)n derivatives

Density functional theory (DFT) calculations at the B3LYP/6-31G** theoretical level were performed for a series of guanidine-fused bicyclic skeleton derivatives C4N6H8-n(NO2)n (n = 1 - 6). The heats of formation (HOFs) were calculated by isodesmic reactions, and the detonation properties were evaluated using the Kamlet - Jacobs equations. The bond dissociation energies were also analyzed to investigate the thermal stability and sensitivity of the compounds. The results show that all of the derivatives have high positive HOFs, compound G has the highest theoretical density, and compound F1 has the highest detonation velocity and detonation pressure. Considering both the detonation properties and thermal stabilities, compounds D1 and D4 (3 nitro substituents), E1 - E6 (4 nitro substituents), and G (6 nitro substituents) can be regarded as potential candidates for high-energy density materials.

DETERMINAÇÃO DE Cd E Pb EM AMOSTRAS DE GOMA XANTANA POR GF AAS

This paper describes the evaluation of a method for determination of Cd and Pb in xanthan gum samples by Graphite Furnace Atomic Absorption Spectrometry (GF AAS) using NH4H2PO4 as the chemical modifier. The sample preparation was performed using a reflux system adapted in the digestion tubes. With this system it was possible to increase the temperature of the digester block above the boiling point of the reaction medium, preventing loss of analyte and excessive evaporation of acids during heating. Samples were digested with HNO3 for 3 h in a digester block at 220 ºC. The limits of detection for Cd and Pb were 2.2 and 33.8 ng g-1, respectively. The RSDs for both analytes were, on average, lower than 5.0% and accuracy was verified by recovery tests, yielding values in the 83-100% range.

Rational use of water in a poultry slaughterhouse in the state of Paraná, Brazil: a case study

Agroindustries are major consumers of water. However, to adapt to environmental trends and be competitive in the market, they have sought rational use of water through water management in their activities. Cleaner Production can result in economic, environmental and social benefits, and in actions that promote reduction in water consumption. This case study was conducted in a slaughterhouse and poultry cold storage processing plant and aimed to identify points of excessive water consumption, and to propose alternatives for managing water resources by reducing consumption. Consumption data are presented in relation to the processing stages with alternatives proposed for the rational use of water, such as closure of mains water during shift changes. Following the implementation of recommendations, a reduction in water consumption of approximately 11,137 m³ per month was obtained, which equates to a savings of US$ 99,672 per year. From this study, it was concluded that the company under review could develop various improvement actions and make an important contribution to the preservation of water resources in the region where it operates.

Hydrogen production from cassava processing wastewater in an anaerobic fixed bed reactor with bamboo as a support material

Attempting to associate waste treatment to the production of clean and renewable energy, this research sought to evaluate the biological production of hydrogen using wastewater from the cassava starch treatment industry, generated during the processes of extraction and purification of starch. This experiment was carried out in a continuous anaerobic reactor with a working volume of 3L, with bamboo stems as the support medium. The system was operated at a temperature of 36°C, an initial pH of 6.0 and under variations of organic load. The highest rate of hydrogen production, of 1.1 L.d-1.L-1, was obtained with application of an organic loading rate of 35 g.L-1.d-1, in terms of total sugar content and hydraulic retention time of 3h, with a prevalence of butyric and acetic acids as final products of the fermentation process. Low C/N ratios contributed to the excessive growth of the biomass, causing a reduction of up to 35% in hydrogen production, low percentages of H2 and high concentrations of CO2in the biogas.

Corpo estranho no ceco retirado por colonoscopia

The foreign body ingestion ocurrs often with children, olds, psychiatrics patients, prisoners or after excessive alcoholic ingestion. Most of foreign bodies (80-90%) passes spontaneously, 10 a 20% have to be removed by endoscopy and only one per cent (1%) needs to be removed by surgery. The authors report a case of a 49-year-old woman who swallowed a needle which impacted in cecum. The patient had psychosis maniac-depressive and swallowed the foreign body aiming self-damage. The presence of foreign body in cecum is rare because of physiologic straitments in the gastrointestinal tract. The ingestion of needle corresponds six percent (6%) of swallowed objects aiming self-damage. Colonoscopy served for localization the foreign body and its withdrawal with success. Colonoscopy for removing foreign bodies is a safe and cheap procedure.