Biology and morphometrics of the immature stages of Epinotia aporema on artificial diet

The objective of this work was to establish a life table for the immature stages of Epinotia aporema, as part of a wider investigation on its biological control. Insects were reared on an artificial diet at 25±1ºC and a 16:8 (light:dark) hour photoperiod. For the identification of larval instars for the study of pathogen-insect interactions under laboratory conditions, head capsule widths (HCWs) were also determined. The egg incubation period was 4.13±0.30 days, larval stage took 11.64±0.49 days, and the development time of the pupal phase was sex-dependent with 8.51±0.69 days for the females and 9.41±0.65 days for the males. Five larval instars were identified.

Cultivo de cachama blanca en altas densidades y en dos sistemas cerrados

El objetivo de este trabajo fue evaluar la tolerancia de la cachama blanca, Piaractus brachypomus, a cultivos en altas densidades en sistemas cerrados. Novecientos alevines de 44,3±26 g de peso, se distribuyeron en seis tanques de concreto, con 4,8 m³ de agua. Tres tanques presentaron cero recambio de agua (SCR), y en otros tres, el agua se hizo circular a través de un bioclarificador (SRA). Ambos tratamientos presentaron fuerte aireación para mantener los sólidos en suspensión y suministrar aire. Los peces se alimentaron a saciedad con pienso comercial por 192 días. Los parámetros de calidad de agua como: oxígeno disuelto, amonio total, nitritos, nitratos, alcalinidad, dureza, temperatura y pH, se midieron semanalmente. Los peces en el SCR crecieron a una tasa de 2,34±0,05 g por día, y tuvieron conversión alimenticia de 1,5±0,06, densidad final de 12,96±0,53 kg m-3, y peso final de 449,5±99 g. En el SRA, los peces crecieron 2,33±0,03 g por día, con conversión alimenticia de 1,6±0,07, densidad final de 12,13±1,12 kg m-3, y peso final de 446,5±10 g. La cachama blanca puede ser cultivada en sistemas cerrados con cero recambio de agua en altas densidades.

Characterization of cowpea genotype resistance to Callosobruchus maculatus

The objective of this work was to characterize the resistance of 50 cowpea (Vigna unguiculata) genotypes to Callosobruchus maculatus. A completely randomized design with five replicates per treatment (genotype) was used. No-choice tests were performed using the 50 cowpea genotypes to evaluate the preference for oviposition and the development of the weevil. The genotypes IT85 F-2687, MN05-841 B-49, MNC99-508-1, MNC99-510-8, TVu 1593, Canapuzinho-1-2, and Sanzi Sambili show non-preference-type resistance (oviposition and feeding). IT81 D-1045 Ereto and IT81 D-1045 Enramador exhibit antibiosis against C. maculatus and descend from resistant genitors, which grants them potential to be used in future crossings to obtain cowpea varieties with higher levels of resistance.

Distribuição geográfica e diversidade varietal de frutíferas e nozes de clima temperado no Estado de São Paulo

Pesquisaram-se, de 1998 a 2002, os locais e as áreas de cultivo, o número de plantas e as principais espécies e cultivares comerciais de frutíferas e nozes de clima temperado do Estado de São Paulo. Para tanto, analisaram-se os dados do Projeto LUPA (Levantamento Censitário de Unidades de Produção Agrícola do Estado de São Paulo) e de consultas aos fruticultores de diversas regiões paulistas. Verificou-se a existência de 6 famílias botânicas, 11 gêneros e 12 principais espécies de frutíferas e uma de noz de clima temperado. São elas, em ordem decrescente do número de plantas: videira rústica, videira fina, pessegueiro (incluindo nectarineira), figueira, caquizeiro, nogueira-macadâmia, macieira, ameixeira, pereira européia, pereira asiática, nespereira, quivizeiro e marmeleiro, sendo as duas primeiras responsáveis por 51% de toda a área ocupada com as referidas culturas de clima temperado. Constatou-se que esse segmento da fruticultura está sendo praticado em 9.510 propriedades de 65% dos municípios paulistas, englobando todas as 40 regionais agrícolas da CATI (Coordenadoria de Assistência Técnica e Integral), existentes no Estado. A videira e a pereira foram as únicas culturas que apresentaram mais de uma espécie botânica sendo cultivada comercialmente. Foram detectadas 53 principais cultivares, sendo a cultura do pessegueiro responsável pela maior fonte de diversidade varietal. Considerando as épocas de colheita das frutíferas e nozes pesquisadas, observaram-se produções de frutos em todos os meses do ano, especialmente entre outubro e abril. Registraram-se novos e importantes nichos de cultivo nas regiões de Jales, Presidente Prudente, Barretos e Jaú, com predominância das uvas finas, das pêras asiáticas, dos pêssegos adaptados e da nogueira-macadâmia, respectivamente.

Guidelines for irrigation scheduling of banana crop in São Francisco Valley, Brazil. I - Root distribution and activity

In order to establish guidelines for irrigation water management of banana cv. Pacovan (AAB group, Prata sub-group) in Petrolina County, northeastern Brazil, the root distribution and activity were measured on an irrigated plantation, in a medium texture soil, with plants spaced in a 3 x 3 m grid. Root distribution was evaluated by the soil profile method aided by digital image analysis, while root activity was indirectly determined by the changing of soil water content and by the direction of soil water flux. Data were collected since planting in January 1999 to the 3rd harvest in September 2001. Effective rooting depth increased from 0.4 m at 91 days after planting (dap), to 0.6 m at 370, 510, and 903 dap, while water absorption by roots was predominantly in the top 0,6 m.

Desempenho produtivo de mudas nacionais e importadas de morangueiro

O objetivo deste trabalho foi avaliar o desempenho produtivo de mudas nacionais e importadas de morangueiro das cultivares Aromas e Camarosa, nas condições climáticas de Pelotas. O experimento foi realizado utilizando sistema de produção sob túnel, irrigação por gotejamento e adubação fornecida via água de irrigação. O transplantio das mudas foi realizado em junho de 2005, num espaçamento de 35 cm entre linhas e entre plantas. Utilizaram-se mudas de duas cultivares (Aromas e Camarosa) e de três procedências (Chile, Serra Gaúcha e região de Pelotas). Os tratamentos foram dispostos em delineamento de blocos ao acaso, em esquema fatorial com quatro repetições. As unidades experimentais foram constituídas por 20 plantas. Semanalmente, de agosto a dezembro, foram analisadas as variáveis número e massa fresca de frutos. A cv. Camarosa (569,6 g planta-1) foi mais produtiva do que a 'Aromas' (510,4 g planta-1). Independentemente da cultivar, as mudas importadas do Chile proporcionaram maior produção de frutos comerciais (724,5 g planta-1) e frutos de maior massa (15,5 g) do que as mudas produzidas na região de Pelotas (493,3 planta-1 e 12,6 g fruto-1) e na Serra Gaúcha (402,3 g planta-1 e 11,7 g fruto-1).

Growth and production of irrigated vitória pineapple grown in semi-arid conditions

This study aimed to evaluate the growth characteristics of irrigated Vitória pineapple plants grown in semi-arid conditions and determine its developmental stages based on those characteristics. It was used a randomized block design with four replicates. The experimental treatments were: plant harvest at 270, 330, 390, 450, 510, 570, 690, 750, and 810 days after planting (DAP). The following variables were determined: plant height, stem diameter, D-leaf length, D-leaf fresh and dry mass, biomass production of plants and plant parts (organs), and vegetative biomass. Five phenological stages are proposed based on vegetative biomass production: < 20% biomass production (V1); 21-40% (V2); 41-60% (V3); 61-80% (V4); and > 80% (V5). The maximum growth rate for plant height, D-leaf length, and stem diameter was observed at the end of the phenological stage V1 (390-411 DAP), and at the end of stage V5 these plant traits had average values of 106, 82, and 7 cm, respectively. The maximum biomass accumulation rates were observed at stages V4 and V5, resulting in a final fruit yield and total fresh biomass of 72 t ha-1 and 326 t ha-1, respectively. Finally, we estimated that 80% of the accumulated biomass may remain in the field after fruit and slip harvest, and could be incorporated as plant residue into the soil.

Studies on the development of spectrophotometric method for the determination of haloperidol in pharmaceutical preparations

A spectrophotometric method based on the formation of ion-pair complex between haloperidol and eriochrome black T (EBT) at pH 1.85 has been described. The formed complex was extracted quantitatively into chloroform and measured at 510 nm. Infra red (IR) studies were performed to confirm the formation of ion-pair complex. Beer's law was obeyed in the concentration range of 2.0-9.0 µg mL-1 with molar absorptivity of 2.67 × 10(4) L mol-1 cm-1. The detection limit was found to be 0.18 µg mL-1. Statistical comparison of the results of the proposed method with those of the reference method shows excellent agreement and indicates no significant difference in accuracy and precision.

Determinação espectrofotométrica indireta de capsaicinoides em pimentas Capsicum a partir da reação com o complexo de Co(II) com 4-(2-piridilazo) resorcinol

Capsaicinoids (CAPS) are substances responsible for pungency in Capsicum. It is important to quantify these types of compounds owing to their broad application in food, pharmaceuticals, cosmetics and chemical weapons. In this work, we developed an indirect spectrophotometric method based on the colorimetric reaction between CAPS, Co(II) 3.10×10-5 mol L-1 and 4-(2-pyridylazo) resorcinol (PAR) 6.23×10-5 and, in cachaça:water 92:8v/v solutions, for quantification of total CAPS in Capsicum peppers. The product of the reaction is CoPAR2CAPS2 and its absorption in aquo-ethanolic solution at 510 nm is proportional to the total CAPS concentration from 0.60 to 17.94 mg L-1. The values of limit of detection and limit of quantification were 0.0004 and 0.001 mg of CAPS/g of pepper, respectively, with 4% relative standard deviation. The developed method yielded similar results to those obtained from high performance liquid chromatography, with 95% of confidence.

Sensitive spectrophotometric determination of lansoprazole in pharmaceuticals using ceric ammonium sulphate based on redox and complex formation reactions

Two simple sensitive and cost-effective spectrophotometric methods are described for the determination of lansoprazole (LPZ) in bulk drug and in capsules using ceric ammonium sulphate (CAS), iron (II), orthophenanthroline and thiocyanate as reagents. In both methods, an acidic solution of lansoprazole is treated with a measured excess of CAS followed by the determination of unreacted oxidant by two procedures involving different reaction schemes. The first method involves the reduction of residual oxidant by a known amount of iron(II), and the unreacted iron(II) is complexed with orthophenanthroline at a raised pH, and the absorbance of the resulting complex measured at 510 nm (method A). In the second method, the unreacted CAS is reduced by excess of iron (II), and the resulting iron (III) is complexed with thiocyanate in the acid medium and the absorbance of the complex measured at 470 nm (method B). In both methods, the amount CAS reacted corresponds to the amount of LPZ. In method A, the absorbance is found to increase linearly with the concentration of LPZ where as in method B a linear decrease in absorbance occurs. The systems obey Beer's law for 2.5-30 and 2.5-25 µg mL-1 for method A and method B, respectively, and the corresponding molar absorptivity values are 8.1×10³ and 1.5×10(4) L mol-1cm-1 . The methods were successfully applied to the determination of LPZ in capsules and the results tallied well with the label claim. No interference was observed from the concomitant substances normally added to capsules.

Determinação de biureto em uréia agroindustrial por espectrofotometria

Foi desenvolvido um método espectrofotométrico para a determinação de biureto em fertilizantes à base de uréia empregando Cu(OH)2(s) como reagente analítico. O método se baseia na reação entre biureto e Cu(OH)2(s) e formação do complexo Cu(C2N3O2H5)2 de coloração violeta cujo espectro apresenta máximo de absorção em 510 nm. Após o estabelecimento das melhores condições analíticas, o método proposto foi aplicado na determinação de biureto em duas amostras comerciais de uréia, uma para pecuária e outra para agricultura. Curvas analíticas construídas no intervalo de concentrações de 0,1 a 0,5% (m/v) em biureto produziram coeficientes de correlação típicos > 0,9990. Os resultados obtidos pelo método proposto foram concordantes ao nível de 95% de confiança com os obtidos por um método alternativo empregando espectrometria de absorção atômica. A exatidão do método foi também avaliada por meio de testes de adição e recuperação de padrão. Recuperações de 92 a 100% foram obtidas e o desvio padrão relativo calculado para 12 medidas sucessivas de uma amostra contendo 0,31% (m/v) foi 2%.

Spectrophotometric determination of lansoprazole in pharmaceuticals using bromate-bromide mixture based on redox and complexation reactions

Two sensitive spectrophotometric methods are described for the determination of lansoprazole (LPZ) in bulk drug and in capsule formulation. The methods are based on the oxidation of lansoprazole by insitu generated bromine followed by determination of unreacted bromine by two different reaction schemes. In one procedure (method A), the residual bromine is treated with excess of iron (II), and the resulting iron (III) is complexed with thiocyanate and measured at 470 nm. The second approach (method B) involves treating the unreacted bromine with a measured excess of iron (II) and remaining iron (II) is complexed with orthophenanthroline at a raised pH, and measured at 510 nm. In both methods, the amount of bromine reacted corresponds to the amount of LPZ. The experimental conditions were optimized. In method A, the absorbance is found to decrease linearly with the concentration of LPZ (r = -0.9986) where as in the method B a linear increase in absorbance occurs (r = 0.9986) The systems obey Beer's law for 0.5-4.0 and 0.5-6.0 µg mL-1 for method A and method B, respectively. The calculated molar absorptivity values are 3.97µ10(4) and 3.07µ10(4) L mol-1cm-1 for method A and method B, respectively, and the corresponding Sandell sensitivity values are 0.0039 and 0.0013 µg cm-2. The limit of detection (LOD) and quantification (LOQ) are also reported for both methods. Intra-day and inter-day precision, and accuracy of the methods were established as per the current ICH guidelines. The methods were successfully applied to the determination of LPZ in capsules and the results tallied well with the label claim and the results were statistically compared with those of a reference method by applying the Student's t-test and F-test. No interference was observed from the concomitant substances normally added to capsules. The accuracy and validity of the methods were further ascertained by performing recovery experiments via standard-addition method.

Cerimetric determination of simvastatin in pharmaceuticals based on redox and complex formation reactions

Two sensitive spectrophotometric methods are described for the determination of simvastatin (SMT) in bulk drug and in tablets. The methods are based on the oxidation of SMT by a measured excess of cerium (IV) in acid medium followed by determination of unreacted oxidant by two different reaction schemes. In one procedure (method A), the residual cerium (IV) is reacted with a fixed concentration of ferroin and the increase in absorbance is measured at 510 nm. The second approach (method B) involves the reduction of the unreacted cerium (IV) with a fixed quantity of iron (II), and the resulting iron (III) is complexed with thiocyanate and the absorbance measured at 470 nm. In both methods, the amount of cerium (IV) reacted corresponds to SMT concentration. The experimental conditions for both methods were optimized. In method A, the absorbance is found to increase linearly with SMT concentration (r = 0.9995) whereas in method B, the same decreased (r = -0.9943). The systems obey Beer's law for 0.6-7.5 and 0.5-5.0 µg mL-1 for method A and method B, respectively. The calculated molar absorptivity values are 2.7 X 10(4) and 1.06 X 10(5) Lmol-1 cm-1, respectively; and the corresponding sandel sensitivity values are 0.0153 and 0.0039µg cm-2, respectively. The limit of detection (LOD) and quantification (LOQ) are reported for both methods. Intra-day and inter-day precision, and accuracy of the methods were established as per the current ICH guidelines. The methods were successfully applied to the determination of SMT in tablets and the results were statistically compared with those of the reference method by applying the Student's t-test and F-test. No interference was observed from the common excipients added to tablets. The accuracy and validity of the methods were further ascertained by performing recovery experiments via standard addition procedure.

Flow injection analysis of vancomycin

A flow injection method for the quantitative analysis of vancomycin hydrochloride, C66H75Cl2N9O24.HCl (HVCM), based on the reaction with copper (II) ions, is presented. HVCM forms a lilac-blue complex with copper ions at pH≅4.5 in aqueous solutions, with maximum absorption at 555 nm. The detection limit was estimated to be about 8.5×10-5 mol L-1; the quantitation limit is about 2.5×10-4 mol L-1 and about 30 determinations can be performed in an hour. The accuracy of the method was tested through recovery procedures in presence of four different excipients, in the proportion 1:1 w/w. The results were compared with those obtained with the batch spectrophotometric and with the HPLC methods. Statistical comparison was done using the Student's procedure. Complete agreement was found at a 0.95 significance level between the proposed flow injection and the batch spectrophotometric methods, which present similar precision (RSD: 2.1 % vs. 1.9%).

Spot-test identification and rapid quantitative sequential analysis of dipyrone

A qualitative spot-test and tandem quantitative analysis of dipyrone in the bulk drug and in pharmaceutical preparations is proposed. The formation of a reddish-violet color indicates a positive result. In sequence a quantitative procedure can be performed in the same flask. The quantitative results obtained were statistically compared with those obtained with the method indicated by the Brazilian Pharmacopoeia, using the Student's t and the F tests. Considering the concentration in a 100 µL aliquot, the qualitative visual limit of detection is about 5×10-6 g; instrumental LOD ≅ 1.4×10-4 mol L-1 ; LOQ ≅ 4.5×10-4 mol L-1.